NSLU2 drive connected to WRT610N

I have a 500GB USB drive that I used to have connected to an NSLU2. Replaced that (and my old router) with a WRT610N. The 610 sees the drive, but wants to format it. Does the 610 not support the file system used by the NSLU2? Known issue / workaround? Latest firmware on 610.
Thanks -
Solved!
Go to Solution.

Well keep in mind that the wrt610 only supports Fat32 and just recently NTFS was added. As for your hard disk do you know what filesystem it is currently formated as? By default the NSLU2 formats using the EXT3 filesystem, But a firmware update allowed the use fat32/NTFS filesystems. I hope that answers your question.

Similar Messages

Time machine can no longer see USB drive connected to airport extreme

According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
Does any one have any idea how to make Time Machine work again when connected to my airport extreme?

bradleydad wrote:
According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
Does any one have any idea how to make Time Machine work again when connected to my airport extreme?
what exactly do you mean when you say that TM doesn't see the drive? do you mean you can not choose it as the destination TM drive in TM system preferences? do you see the airport drive mounted in finder? if yes, connect it directly to your mac and repair the disk (not permissions) with disk utility. then move it back to AEBS. see if that helps. if not try the following terminal command
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
it should not be necessary with drives connected to AEBS but it might work.

Do I need to keep my external hard drive connected at all times for time capsule?

Do I need to keep my external hard drive connected at all times for time capsule?

Hi,
I have a similar question. I have backed up my external hard drive through my computer, onto my TC. When I go into TM, it doesn't show the external hard drive unless it is connected to the computer. Can I access the info from the external hard drive that is on the TC if I don't have the hard drive plugged in? If so, how can I do that?
Thanks,
Bernadette

Using external hard drive connected to desktop as time machine disk for laptop

I recently purchased an external hard drive for the purpose of backing up my laptop and desktop macs. Both are running Mountain Lion (10.7.5). The desktop is physically connected to both the hard drive and to my modem. I have enabled pretty much every sharing option on both the laptop and desktop. When my router crapped out I began just using the internet sharing capabiilty.
I have been able to chose the desktop as the disk for backing up my laptop, but I want to use the hard drive (connected to the desktop) as the disk. I cant figure out how to do this yet. I can easily access the hard drive by using either the "connect as user" option. I thought that perhaps I could broadcast the connection somehow as an airport connection, but I don't know how to, or if this is even possible.
The desktop is a mac mini, and the laptop is a macbook pro. Both were purchased in mid 2011.

This may assist you:
http://pondini.org/TM/4.html
Ciao.

Can't see contents of USB hard drive connected to Time Capsule

Hi. I have a USB hard drive connected to my Time Capsule (which I just got today). I just want to use it as a shared drive, so that the users in my home can use it to access common files (media files, stuff like that).
The TC's set up is to enable file sharing with accounts. AirPort Disk Guest Access is not allowed.
When I authenticate as a user via Finder I can see the disk, see that disk space has been used, but can't see the contents. I'm guessing this is because the files that are actually on there belong to some other user.
Is my guess right? Any suggestions as to how we can all use it as a transfer drive?
Col

Fixed it. I connected the USB drive directly to my computer, and dragged the folder into the 'Shared' folder, which Time Capsule had created. The original folder is now visible, which is what I wanted!

Existing files on drive connected to latest Airport Extreme do not show up, however files copied over the air to the drive do. Any ideas?

I have the latest Airport Extreme with a Seagate drive connected. I copied files to the drive while it was connected to my MacBook Pro. The files do not show up when connected to the AE, but they appear when connected to the Macbook, Files copied over the network to the drive appear. The drive is formatted HFS+.

After playing with this for the last few days, I found a solution. Under the "Disks" tab in Airport Utility, the "Secure Shared Disks" drop down needs to be set to "With device password". Mine was set to "With acounts", which even after correct authentication, none of the files would appear.
Another interesting note: The files that I could see, the ones I copied over the network, do not appear now. I can copy over new files, and they show up, but the ones copied prior to changing the "Secure Shared Disks" option, do not.

Time Capsule can't backup external hard drives connected to it. Got that.

Hello Apple Support Communities! This is my first post. Hope this finds you all well My first year as an Apple user. I bought a 2-Tb TC and am running my first backup to my MacBook as I write this.
Problem statement: TC can't backup external hard drives connected directly to it, but the ones connected to the Macs that are connected wirelessly to it. Duly noted. However, the Spotlight will reindex the hard drives connected to the Mac and that will take hours; the whole backup will take days. Thus, excluding the hard drives at "System Preferences > Spotlight > Privacy tab" will probably help reduce the time of backup, or just ejecting them will do too. That itself has not proven effective coz it's still taking forever (50Gb in 2 days, still going).
Questions:
1) Do I wait until my first backup to my MacBook's internal hard drive is done before I connect my hard drives to my MacBook and attempt another backup? If yes, how do I go about the excessive time Spotlight reindexing takes if I intend to backup my hard drives connected to my MacBook?
2) Is there any other way of speeding up the first-time backup?
*Note: All versions of OS and firmwares are up-to-date. TC is connected to an external wireless router. TC is intended to be used as backup device and / or file server only.
P/S: Apologee if this has already been discussed before, thus, a link to previous discussion thread would highly be appreciated)
- Shook Hashem, Malaysia.

How do I backup the externel hard drives connected to my MB. I was under the impression that that has already been done, because I've read it somewhere in a discussion that said it's done automatically unless I exclude it from a backup, which I didn't. So it's supposed to backup the external hard drivestoo because I had them connected to my MB the entire time during the backups.
By default an external drive is excluded.. the list is odd.. if I plug a drive into the mac.. it immediately is listed as excluded.
This is not the list of included.. this is the list of excluded.. remove it from the excluded list to include it.
It is kind of reverse polish notation in backups.
If I want to enter the Time Machine, should I enter it with the TM turned on or off?
Not sure what the question means. If you use the star wars display and want to recover files then use TM off.. but read up pondini.. how to do restore etc.
http://pondini.org/TM/FAQ.html
15A in particular on the how to use TM.
When do I uplug the ethernet and use the wireless connection instead?
Once you have finished the main backup you can go back to wireless. The incremental backups are mostly very small.

Best practices with external drives connected to Time Capsule?

I'm enjoying my new MBP but the storage limitations are a challenge with twenty+ years of data. I know it's not technically sanctioned by Apple but in another forum I found a discussion about successfully connecting an external drive to the Time Capsule. I tried this for a few months and had some problems, so I wonder if anyone here might have some insight into which of my drives would be best to use in this way and what, if anything, I must do to bless it for the task.
The drive most highly recommended in the forums at the time is the WD My Book. After buying it I learned that is Windows users install a package and update the driver for use with Time Machine, which Mac users are not able to do. The driver is available on the web but it's said to cause problems with Mountain Lion, which I can confirm. It's USB 3.0 and powered, though, which my two alternatives are not. It's also 2 TB and presently in two partitions. I also have a Seagate Free Agent GoFlex 500 which gets extremely hot with any use and an Iomega eGo Helium 500 I've been using for backups. Both are USB 2.0.
My goal is to put my iTunes Library and Time Capsule on the net (running 2.4 Ghz and 5 Ghz, averages 50Mbs). When I did this for a few months with the WD both its shares frequently dropped off my Desktop, as if powered down or something. Also there were the issues with Time Machine many others are having. Right now our video collection sits on the Time Capsule. Would it make sense to move our video to the WD and run iTunes and Time Machine on it? If so, do you have any tips for formatting, petitioning, or drivers (or anything else) to help this run smoothly? The WD works fine when hard-wired and the TC, too is fine without the WD at the party.
With apologies for the tome.

kevlee64 wrote:
Thanks, but the drive is connected directly to the back of the Time Capsule by an ethernet cable.
Ah, that's a different colored horse.
You have a NAS (Network Attached Storage) drive, not a USB external drive connected to the USB port.
Many of those need software/firmware updates to work with Lion. Check with Iomega.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

USB drive connected to Airport Extreme becomes read-only

Hello
I have a USB drive connected to my Airport Extreme 802.11n (2nd generation, firmware v7.6). To access the drive, I've set secure shared disks to "with accounts" then defined a user account with read/write access. I connect to this drive using two Windows 7 SP1 64-bit computers.
Reading and writing to the disk is fine. However, after a day or so, I can read from but cannot write to the disk! I then have to restart the USB drive to write to it again. This has been happening for a while.
Also connected to the Airport Extreme (using Ethernet) is a Lacie NAS drive (which runs a cut-down version of Linux). This works fine: I've never had any problems with it! It too is password protected.
Please help!
Thanks
Praful

Tried what you suggested last night - no change. What is odd, though, is that I can create a new folder on the external USB HDD (through the Hub) and copy a file into it. While I can then close Finder, re-open and see the Folder and file I copied, I still can't see all the data that is currently stored on the drive...Is this a delete and re-copy scenario?
Thanks!

Time machine will not recognise WD hard drive connected to AE

I have a WD hard drive connected to my AE by ethernet cable. While I can access this drive wirelessly via Finder, both Airport utility and Time machine do not recognise this drive for back up purposes. Is there any way I can change the setup to enable time machine to work?
Thanks - Eric

You might want to take a look at the macosxhints.com article "10.5: Set up Time Machine on a NAS in three easy steps ".
BTW, MobileMe won't be able to backup your entire hard drive.

External Drive connected to Airport Extreme, need Time Machine 3 Mac's Help

I own an Airport Extreme and just recently added two new Macs with the Time Machine feature to our household. I would like to use Time Machine to backup to my Airport Extreme that has a 500 GB hard drive connected. It seems Apple has this blocked since they have released the Time Capsule version of the router. Is there a work around this feature so I don't have to go out an purchase what I basically have already got? Please help. We would like to upgrade our older macs to Leopard and us the same system to back them up as well. Please advise. Thank you.

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Can i access music on my hard drive connected to airport extreme with my iphone 5

Can I access photos and music on my usb hard drive connected to an airport extreme using an iPhone 5? I can access theme with mac and pc.
Thanks, Kevex.

Yes, but not out of the box. You have to download an app like FileBrowser.

Can a PC share a hard drive connected to Airport Extreme?

I have a new Airport Extreme with a Seagate FreeAgent Desk for Mac 1.5 TB hard drive connected via USB. The Airport connects to the internet via a Linksys Vonage router, and two Macs are set up to use the Airport via wireless. The FreeAgent drive has 4 partitions: 1 for a TimeMachine backup from both Macs, 2 for SuperDuper backups of both Macs, and 1 for home video files and other backups. I also have a Dell PC running Windows XP SP2 hardwired to the same Linksys Vonage router.
I'd like to use partition 4 on the FreeAgent drive to backup the PC. Is this possible, and if so, how do I get the PC to recognize the FreeAgent drive?
Thanks very much for your help.

dwhewlings, Welcome to the discussion area!
Yes, you need to use Bonjour for Windows.

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

NSLU2 drive connected to WRT610N

Similar Messages

Maybe you are looking for