NSP (ABAP) on XP home ?

I read the requirements, but is it really essential to instal on XP professional? I have WebAS 6.20 running on XP home and it works fine. Before I download the 1.5G and try to instal - does someone know for sure if it will work or not? Thanks and best regards, Jurgen

In the installation requirements there are no remark about this, but as far as I remember I had some problems when I tried to install NSP/6.40 after a not completely clean uninstall of WAS 6.20.
From the other hand I don't see any point to keep both instance, if they are both ABAP engine. If you want to keep you work done in 6.20, put export everything and import them back to 6.40. At least this is what I would do.
Peter

Similar Messages

NSP ABAP 700 - which kernel patch to use?

Hi,
I have my NSP ABAP 700 from SDN installed on my home laptop.
I'd like to patch the kernel, however I'm not sure which kernel patch I can use from the Markeplace.
I have Windows XP with MAXDB on an intel architecture.
Is it the one called "Windows Server on IA32 32bit"?
A few years ago it was called somthing like x86 32 bit.
Is it the same?
Anyone has experience with patching kernel for NSP ABAP?
I did kernel patch for WAS 6.20 ABAP and I had to also patch the Database in the end. Is it the same for 7.00?
Thanks in advance,
Peter

http://service.sap.com/patches
Entry by Application Group
SAP NetWeaver
SAP NETWEAVER
SAP NETWEAVER 2004S
Entry by Component
Application Server ABAP
SAP BASIS 7.00
SAP KERNEL 7.00 32-BIT

Greek on NSP ABAP server

I have the NSP ABAP preview installation (Non Unicode Kernel).
When I am trying to write a simple ABAP list in SE38 using Greek characters the list doesnot display them correctly. I can write GREEK text literals in my source code, BUT when a save it and activate it the Greek text literals change into literals like this '??G????T'.
When I am going to translate the Text symbols in Greek, EL is not offered as a candidate translation language.
What should I do in order to be able to write a simple report and display Greek ?
I run RSCPINST and added EL but without success
Thanks in advance

EP 7 does not have the ui5 iview, you should upgrade it to the latest 7.3 or higher..
Else, you can integrate the ui5 apps as URL (not preferred, you might loose functionality of session/eventing etc)

Whats the port for NSP ABAP

Hello,
Do you know whats the port no for (NSP) Netweaver Sneak Preview for ABAP version?. Also how to get the Web Service file from it?.
Thanks,
Sunita.

Hi,
If it's using the WAS ABAP, then you can find the port number by the following way...
Goto SICF txn and click on EXECUTE on initial screen, then goto menu - Goto - Port Information.
Here you can find entire ports info on WAS ABAP Server.
Am not really sure if this is what you are looking for. Ignore it if it is of no use to you.
Regards
Raja Sekhar

NSP ABAP Automatic Startup without logging on

I have the ABAP trial version loaded on a standalone PC.
I access the NSP system remotely, and rarely log onto the NSP system directly.
Is there a way I can configure the system so that the NSP Server is automatically started at system startup, rather than when I log on?
Many thanks
Jack

Hi Markus,
Thank you for the suggestion, but the startup folder is only executed when you log in, just as the registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run is also only run at logon.
I was looking for a way to start it automatically after the system boots without the logon requirement.
Kind Regards
Jack

Netweaver NSP ABAP engine on 256MB

Hi,
I have only a 256MB laptop, where MiniWAS 6.20 was running quite OK.
I've installed NSP on the weekend, however it has much higher memory requirement.
Log is available here:
http://www.geocities.com/incho_master/Netweaver_NSP_ABAP_640_Engine_Install_Windows.pdf
Any idea how to reduce the memory consumption?
E.g.: Where can I change the memory usage limit of the DB?
There shouldn't be such a big difference between WAS 6.20 and 6.40.
Thanks in advance,
Peter Inotai

Anyone, who would like to tune NSP a little bit:
Useful info was posted in other topic thanks to Klaus Keller, but it's relevant here:
You could reduce the memory consumption by changing the CACHE_SIZE in the database instance. To proceed this either use the Database Manager GUI:
- Start the Database Manager and log on the NSP database (user: control, password: control)
- Stop the database by clicking the red dot
- Go to Configuration > Parameters > double click on CACHE SIZE
- Enter a new value
- Start the database by clicking the green dot
or you can use the command line interface (CLI):
dbmcli -d NSP -u control,control db_offline
after OK, enter:
dbmcli -d NSP -u control,control param_put CACHE_SIZE <VALUE>
and finally:
dbmcli -d NSP -u control,control db_start
Note: VALUE is in pages per 8 KB blocks!
Hope this helps.
Regards,
Klaus

Licensing Woes NSP ABAP trial NW2004S

1) as previously posted I NEVER get email back.
2) German site returns 500 Dispatch Error when I try and logon.
3) Nowhere on my system can I find program license.exe
4) My current hardware key shows blank. The installed license (currently valid until 28 May) shows Hardware key of TEMPLICENSE.
5) Now when I try and get a license for this SAP returns Invalid Hardware Key --so How do I get the proper hardware key.
Thanks

Hello,
You get the hardware key within the transaction slicense in the "Current Settings" area (upper left) in "Active Hardware Key".
For license requests use this page:
<a href="http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm">http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm</a>
Rgds,
Klaus

License key MINISAP NSP

Hi all,
I successfully installed the MINISAP NSP (ABAP) Sneak Preview more than a month ago (30 day trial version). I forgot to request a new 90 license key in time, so now I can't extend it with the ney license key I just received, since I can't log in anymore.
Is there a way to extend my license without uninstalling and installing (again) the MINISAP NSP system?
Kind regards,
Micky.

Hello Klaus,
In the system number.field it is written "System No.Empty" (Current license is the
first templicense). I have therefore always left this field empty when filling in the
request form for new license key on www.sap.com/minisap.
I tried to logon to cl.000 with user sap*, marked the row (templicense row), right-clicked and then choosed "Delete License" from the list.
I then received a message saying:
"Only the administrator is allowed to delete licenses. When the valid system licenses has expired, only the user SAP* can log on to the system. In this case, it would be dangerous to delete a license. This is why the user SAP* is never
allowed to delete a license." !!
However, since I haven't started developing yet in NSP and was prepared to re-install everything if nothing worked out, I thought I better try first with debugging the SLICENSE program after selecting "Delete license" in order to "manipulate" the check giving the message above. It worked - the old templicense was deleted!
I restarted the system and tried to install the new license key according to instructions found on SDN: System number should not be filled, the thread said, so I left the field System number empty in the installation pop-up. I still received the same error SLIC105 - invalid license key.
Finally, I tried to fill in the system number received in the mail from SAP anyway -
and now it works !! The new license was installed and it's possible to login with
other users again.
Thank you very much Klaus for giving me the encouragement to remove the old
license key. If I had not received your recommendation, I would never have dared
to think of removing the old license key before installing the new one.
Please copy your answer into my new thread and I can give you my points. (This thread was already marked as answered, so I can't give you any points in this thread I guess)
The new thread was created 27th of August and called:
Error SLIC105 - install new licence key for MiniSAP NSP SP8, Win XP Home
Best regards
Viveka

Free Abap Development Environment

Hi,
I use to develop in ABAP on SAP R/3 4.6C at work.
I would like to know if it's possible to have a free version of R/3 or NetWeaver to learn more about ABAP programming at home and to learn about how to developp using .NET/ JAva technlologies with ABAP.
I eared about something called 'MiniWas ' but didn't find how to download it and what I can exactly I can do with it
Regards,
Morgan Bourgeois

Yes, I feel your pain Morgan, It can be confusing. I will try to hit all of your doubts here.
First the Sneak Preview that I pointed you to, is a MiniWas, you get all of the technology layer(basis) including the ABAP runtime, development envirnoment/tools, and everything that you had in previouse miniwas. Not sure why they have it listed the way they do, it is a little confusing. But they maybe pointing out the fact that this is the first miniwas where ABAP WebDynpro has been included. This is just like the WebDynpro Java, but on the ABAP stack. In this version you also get the new ABAP Editor, new debugger, and the ALV Object Model. The latter was available in the 6.40 version also.
This miniwas only have the technology layer, no functional modules of R/3 like PP, MM, SD, VC, etc.
Please remember that Netweaver is the platform for which SAP solutions run on top of. It has two sides(stacks), the ABAP stack and java stack. For example ECC(formerly R/3) runs on Netweaver, but on the ABAP stack. The Netweaver Portal runs on the java stack, but can invoke iviews which use Web Dynpro components which have be developed on the ABAP stack. Of course, it can handle other apps as well includeing java and .net.
The netweaver portal is simple a frontend in which you can tie all of your applications, whether SAP or non-SAP into one place for the end user to access. If you are accessing a backend system which is ECC(R/3), then yes, you would be calling a BAPI or RFC function module which is written in ABAP. (I hope this is clear)
HTMLB is like an abstraction from regular HTML. You can use this to develop your UI interface. You can use this in Business Server Pages(which can also be ran in an iView of the Portal) or in the JSP DynPage applications(which again can be in an iView). HTMLB is purely a UI technology which you can use in developing your applications. WebDynpro does not allow for using HTMLB, or HTML, but it probabaly uses it underneath, because the HTMLB interface looks/feels the same as WebDynpro UI.
If you have more follow up questions, please ask.
Regards,
Rich Heilman

Helpfiles for "SAP NetWeaver 04s ABAP"

Hallo to all.
First of all I have to thank to all people that help me during the installation of "SAP NetWeaver 04s ABAP".
I'm now able to develop ABAP Applications at home.
But Ive also a new problem which I couldnt solve yet.
when I'm try the F1 - Help no help files appear. I only get the message: "There are no help files available".
I've looked the whole SAP "NetWeaver 04s ABAP" .rar File for the help files but I did not found them.
Are in this version no help files? Or is there a possibility to download the files and integrate them to "SAP NetWeaver 04s ABAP".
If someone has an idea, please post it.
Best regards
Seraphim

Hi Seraphim,
You can download the SAP Library from the Markertplace, heres a link to the installation guide,
https://websmp106.sap-ag.de/~sapdownload/011000358700002110712004E/SAPLibInstGuide_640_EN.pdf
Hope this help!
Juan
Please reward points if helpful

NSP NW04s - Sneak Preview Developer Access Key -- NOT WORKING !!!!!!

Folks,
I have installed the NW04S NSP ABAP system. Everything went fine with the installation. The key which is given in the installation document '29671482393151224771' is not working for developer BCUSER.
I see many other folks facing the same issue in the forum and I tried all the ways posted in the forum... creating Z and Y program Se38 and tried with SE80, but no luck.
I would highly appreciate if any one have a crack on this issue. Infact I reinstalled the system thinking there could be a flaw in my fisrt installation... but the result is same.
Thanks much.
-Guru

I tried 00000000000000000000 and that is also NOT working. My trial version is now licensed for 90 days on a Windows XP professional laptop. I do not know if I had the problem before I renewed the INITIAL 4-weeks licence to the 90-day license.
Everything else works fine. I can create and run various programs using the trial version. However when I attempted to modify an implementation method in the ABAP class - BCALV_TREE_EVENT_RECEIVER, I am asked for an Access Key.
Is anybody from SAP looking into this? I believe it is clear that there is a problem with Access Key for a number of us. That the default 29671482393151224771 is NOT working for everybody.
Any help in solving this Access Key issue is greatly appreciated.
Thanks!

Sap setup for practise at home

Hi ,
Is there any SAP setup available that i can install on my laptop locally
and can practise the configuraiton and ABAP coding at home itself
With Regards
AMEHRA

Not without buying a license
There are companies that will offer this service for a fee.
PeteA

Error in JCo Connection creation

Hi All,
When I create a JCo connection on my local J2EE it fails with the error enclosed as below:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=frces4066 GROUP=PUBLIC R3NAME=AM1 MSSERV=sapmsAM1 PCS=1 ERROR partner not reached (host frces4066, service sapmsAM1) TIME Mon Apr 03 18:44:33 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8596 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
When I try and ping the JCo the error is as enclosed below:
Failed to ping JCo destination WD_COMMITMENT_MODELDATA_DEST
I have maintained the enteries in hosts file as well as the services file and when I telnet the server on port 36XX where XX is the system number of the system I create the JCo for it connects successfully.
When I test the CIM test for the SLD that connects successfully.
Where and why is the JCo failing after creation?
Can someone throw some light on this error.
Thanks in advance for all your help.
Best regards,
Divya

Hi All,
Anyone can help? I got the same problem. It seems that the PUBLIC group in NSP ABAP system can't not be accessed.
Here is my system landscape:
- I have installed the Java and ABAP in the same host
- My ABAP system is NW2004sSneakPreviewABAP, Java is SAPNetWeaver04_SP16Preview
1) I set up SLD successfully (import CIM, run RZ70, the ABAP system shown up in the Technical Landscape in SLD
2) I created JCO destination with Load Balancing but it failed to ping and to test
3) I already define the group 'PUBLIC' in tx SMLG but from SAPGUI I can't add the group. I got the error message "Message Sever could not find any group".
4) The PUBLIC group does not show if I run the program 'lgtst'.
Test lgtst:
===========
c:\usr\sap\NSP\SYS\exe\nuc\NTI386>lgtst.exe -H hpxp2 -S sapmsNSPusing trcfile: dev_lg
list of reachable application servers
[hpxp2_NSP_00] [hpxp2] [10.10.0.10] [sapdp00] [3200] [DIA UPD ENQ BTC SPO ICM ]
c:\usr\sap\NSP\SYS\exe\nuc\NTI386>lgtst.exe -H hpxp2 -S 3600
using trcfile: dev_lg
list of reachable application servers
[hpxp2_NSP_00] [hpxp2] [10.10.0.10] [sapdp00] [3200] [DIA UPD ENQ BTC SPO ICM ]
James

Connect to message server host failed;WSAECONNREFUSED: Connection refused

Hi All,
I am getting the following error when I tried to test the system connectivity from the portal to NSP instance.
Connection failed. Make sure that Single Sign-On is configured correctly
I found the following entry in the logs
Error> occured >Wed Feb 03 22:43:49,875<
RfcException:
 message: Connect to message server host failed
Connect_PM TYPE=B MSHOST=abchome.abcsap.local GROUP=SPACE R3NAME=NSP MSSERV=sapmsNSP PCS=1
ERROR partner '192.xxx.xxx.123:sapmsNSP' not reached
TIME Wed Feb 03 22:43:49 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
 Return code: RFC_FAILURE(1)
 error group: 102
 key: RFC_ERROR_COMMUNICATION
Both NSP and J2E instances are on the same server. OS - win2k3.
I checked the services file and have the sapmsNSP entry.
I am able to launch an SAP transaction from System Administration -> Support
RZ70 from NSP also fails JCo error. SLD_UC RFC itself works fine and the JCo RFC provider SLD_UC program is running
WEB AS & ITS connections work fine.
User authentication is from backend, NSP.
I think I have gone thru all the logs but could not resolve the issue.
I appreciate any help on this,
Victor

I tried to go thru the thread. I did not find any clue as why only server connectivity is failing. ABAP trial version is running fine and the NW trial version is working fine too. These run without crashing. I did a lot of customizing on the portal but dont see any issues except the System Connectivity. Like I mentioned I did UME configuration to point to NSP ABAP instance and I can log into the portal with user credentials that I use to login to ABAP. I can launch webgui etc without any issues.

SAP MMC Says Dispatcher running but not connected to message server

I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid 560 (PC with Windows NT)
[Thr 4516] relno 6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno 43
[Thr 4516] intno 20020600
[Thr 4516] pid 4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c 1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.

There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor

NSP (ABAP) on XP home ?

Similar Messages

Maybe you are looking for