NSS 324 still work when connection to ActiveDirectory lost?

Hi,
i would like to use a NSS 324 for second office, this has a vpn connection to headquarter with DC.
Second office has no DC. If vpn connection get lost, does NSS remember login informations?
Or does it only work with active connection to activedirectory?
Kind regards

Michael,
If the vpn goes down then your domain users will lose access to their shares. The NSS authenticates each time a share are accessed. Depending on how many users you have you could set up local groups and add local users to that group in case of Internet down.
Jason Bryant
Cisco Support Engineer
.:|:.:|:.

Similar Messages

My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

My iPhone 5 screen is black and will not come back on. The phone still works when paired with my vehicles Bluetooth what's wrong with it, and can I fix it?

I have a similar problem. I restored my iPhone 5 to the latest available OS. After completing the process the phone never restarted. The phone was fully charged when I restored it but now refuses to charge past the red battery icon. I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone. The Apple logo does come on and the software fully loads. iTunes tells me the phone will restart but never does. I left it to charge all night but it never appeared to load the battery. This morning I went to the Grand Central Terminal apple store for help. A woman at the store plugged the phone in but it never charged. She absolutely refused to believe that I got my phone in UFD mode and loaded any software on. I don't think it is a battery issue. The only solution I was given was to buy a new phone. Repairing it was out of the question. At this point the phone is completely useless. Thanks in advance for the help.

Will a DVI to HDMI adaptor work when connecting the ipad2 to a projector?

Will a DVI to HDMI adaptor work when connecting the ipad2 to a projector?
I have connected my ipad2 to my HDTV and it works perfectly. I'm trying to connect the ipad to either the DVI port on my classroom laptop or to my Promethean board so that I can mirror educational apps for my students. Does anyone have suggestions on how to make this work?

No, there's not any damage to your MacBook.
http://store.apple.com/us/product/HFQL2VC/A/moshi-mini-displayport-to-hdmi-adapt er-4k?fnode=51

Will my programs still work when upgrading to 10.6?

I am using a MacPro with 10.5 and I want to upgrade to 10.6 but the thing is that I have some programs that I use continuously but I didn't pay for them (if you know what I mean...). Will these programs still work when I upgrade to 10.6?

10.6 is Intel only. To continue the use of older non-Intel software, that software must work with Rosetta emulation (which almost evrything does). Be sure that when you are installing 10.6, the option to add Rosetta emulation to Mac OS X 10.6 is selected.
I do not know what you mean by your comments, but if this computer is being used for Business purposes, you are taking a huge risk that someone can come after you Business profits.
"Don't bet your business on 'borrowed' software."

Internet stopped working when connected to Cisco VPN

Hi,
I have configured IPSec (Ikev1) Remote access VPN in ASA 5520, VPN is connecting properly and i am able to access all internal resources but Internet is not working when connected to VPN. I have investigated on this and found problem with the default gateway, i am getting ddefault gateway duringVPN connection. I am surprised in ASA there is no default gateway configured for remote VPN IP pool then how remote clients can get default gateway.
I am describing my problem in below given image Please help me to shootout it.
Thanks in advanve.

Hi,
The top configurations is specified to Tunnel All traffic as you can see from the "split-tunnel-policy tunneall". In this case the Split Tunnel ACL is ignored to my understanding.
The bottom configuration is specified to use Split Tunnel but I cant see the ACL specified there.
To my understanding you should be seeing routes on your actual computers routing table for the networks that are reached through the VPN.
On a Windows machine you can open the command prompt and issue the command "route print" to view the routes
Here is an example when I am connected to one Split Tunnel VPN (click to enlarge)
To my understanding there is no default gateway in the virtual VPN interface configurations as the host forward all the traffic that needs to be tunneled to the actual virtual interface and from there on in it heads through the VPN Connection.
Here is an example what the VPN Client Statistics/Route Details tells me
Both Internet and the remote network/host behind the VPN connection can be reached.
What does the above window show for you in your VPN Client when active?
- Jouni

Does FaceTime still work when you're browsing the Internet simultaneously

Does FaceTime still work when you're browsing the Internet simultaneously on your phone?

triptifromsan francisco wrote:
Does FaceTime still work when you're browsing the Internet simultaneously on your phone?
iOS: Using FaceTime - Apple Support
in my experience with facetime, you can't browse other apps or features while on a facetime video call.

If i buy an iPhone in the USA will it still work when i move to Canada?, If i buy an iPhone in the USA will it still work when i move to Canada?

If i buy an iphone in the USA will it still work when i move back to Canada?

You would probably want to look at a factory unlocked iPhone so you do not have to use a contract with a US carrier. And look at the network standards being used, in the US iPhones are CDMA (verizon and Sprint) and GSM (AT&T). What are the carriers in Canada using? If majority, or the carrier in your location are GSM then you should look at the GSM iPhone. Also check warranty and applicability in Canada...iPhone warranties are supposed to be valid only in the country of purchase.
AppleCare+ is available in the US and Canada but, again, be sure you can transfer the coverage to Canada.

Extensions still work when calling from outside but not in listed in DN

Hello,
There are 3 extensions that still work when calling from the outside, but they don't reside in the DN listing. Where could they still exist? Using Cisco Unified CM 8.5.1.
Thank you for any assistance!

Review you dial plan and also the unassigned DNs, they might not exist as an exact match, but maybe in something with wildcards.
You can use DNA to search for them.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer. The sound still comes from the speakers. Any solutions?

The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds. The sound still comes from the speakers and is not redirected to the head phone. The port has never worked. Any solutions?

okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
JB

IPhone 4S only powers up, works, when connected to wall power

Brand new iPhone 4S, arrived two days ago on the model's launch day. Few glitches, expected w/ new phone, not a big deal, worked through them, initially did restore-type installation to transfer all info from old AT&T iPhone 3GS, still w/ AT&T. It was working fine.
Then, connected to wall charger last night. This morning, before disconnected from wall charger, charge showed 87%, then disconnected and screen went black.
Phone did not, and does not, respond when unconnected.
Connected iPhone to MacBook Pro, result is same as when unconnected, no response.
However, when iPhone connects to wallpower, it works fine. Powers up, all functions seem to be normal, but noted that charge now shows only 84% and it's not going up, as it should.
I have been studying these boards today before typing this post. Have tried the reset procedure (hold down sleep/wake + home buttons simultaneously for 30+ seconds) when iPhone is unconnected and when iPhone is connected to computer, still unresponsive. Also tried reset procedure when connected to wall power, it eventually goes into reset mode and it eventually got to the point that it said connect to iTunes, but when I disconnect from wall power and connect to computer, it is again unresponsive. After doing that, connected to wall power, and it powers up normally.
With iTunes open and running, the iPhone does not appear therein when connected. Left iPhone connected to computer all morning, no changes in nonresponsiveness. Before last night, this was not a problem.
Before I even starting using this iPhone, I'd put it in a nice, new OtterBox case. It has not been dropped or mishandled or gotten wet.
My conclusion is that there's a hardware problem that I cannot fix, and even if I had a clue what to do, I'd probably void the warranty.
Looking for suggestions as to what to do short of calling AppleCare. Any help will be most appreciated.

Called AppleCare this morning, confirmed that this is a hardware problem. Getting replacement.

Audio not working when connected to HDTV

I connected my MacBook Pro to my Samsung HDTV LN40D503F6F and also connected an HDMI cable to the TV using Apple mini DVI cable. I tried connecting to both HDMI/DVI 1 and HDMI 2. Video works fine when connected to both the HDMI ports, but the audio didnt work. I also purchased an a 3.5 mm audio to RCA cable and tried switichin between both the HDMI ports but still it is not working. Any solution would be great. Thanks !!!

Hi:
While trying to help you, I was looking along the same lines as you were (I assume).
I did a search by the IDT 92HD73E audio codec and all I could find were drivers for system boards with Intel processors such as the driver you tried unsuccessfully.
I have finally found a W8.1 driver for that codec from a desktop PC with an AMD processor and chipset.
See if this one works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=cp-134120-1&cc=us&dlc=en&lc=en...

DBMS_SCHEDULER.run_chain() only works when connected to DB as sys

Database Version: 10.2.0.4.0
Hello,
I have a problem with DBMS_SCHEDULER.run_chain where the Chain to be run references an external Program.
The Chain runs correctly when run via SQLPLUS when you are connected to the database as SYS but fails to run when you are connected to the Database as the User who owns the Chain.
The complete steps to recreate the problem are below. Any thoughts or suggestions gratefully received.
Thanks,
Andy
STEP 1: Login with sys as sysdba and create a new user
CREATE USER chaintest IDENTIFIED BY password PROFILE DEFAULT ACCOUNT UNLOCK;
GRANT MGMT_USER TO chaintest;
GRANT CONNECT TO chaintest;
GRANT IMP_FULL_DATABASE TO chaintest;
GRANT SCHEDULER_ADMIN TO chaintest;
GRANT MANAGE SCHEDULER TO chaintest;
GRANT EXECUTE ANY CLASS TO chaintest;
GRANT CREATE ANY DIRECTORY TO chaintest;
GRANT CREATE ANY JOB TO chaintest;
GRANT CREATE TABLE TO chaintest;
GRANT EXECUTE ANY PROGRAM TO chaintest;
GRANT CREATE JOB TO chaintest;
GRANT CREATE EXTERNAL JOB TO chaintest;
STEP 2: Create a very simple batch file
Create a folder called c:\chaintest and create a text file in there whose entire contents
is "notepad.exe" followed by a carriage return. The idea is that if this batch file is
called a notepad Window will be opened so we can clearly see if the batch file has run.
STEP 3: Create a DBMS_SCHEDULER Program
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM (
program_name => 'CHAINTEST.CHAINTEST_PROGRAM',
program_type => 'EXECUTABLE',
program_action => 'C:\WINDOWS\SYSTEM32\CMD.EXE /q /c c:\chaintest\chaintest.bat',
number_of_arguments => 3,
enabled => false);
DBMS_SCHEDULER.define_program_argument(
program_name =>'CHAINTEST.CHAINTEST_PROGRAM',
argument_position => 1,
argument_type => 'VARCHAR2',
default_value => '/q');
DBMS_SCHEDULER.define_program_argument(
program_name =>'CHAINTEST.CHAINTEST_PROGRAM',
argument_position => 2,
argument_type => 'VARCHAR2',
default_value => '/c');
DBMS_SCHEDULER.define_program_argument(
program_name =>'CHAINTEST.CHAINTEST_PROGRAM',
argument_position => 3,
argument_type => 'VARCHAR2',
default_value => 'c:\chaintest\chaintest.bat');
DBMS_SCHEDULER.enable('CHAINTEST.CHAINTEST_PROGRAM');
END;
STEP 4: Create a chain
BEGIN
DBMS_SCHEDULER.CREATE_CHAIN (chain_name => 'CHAINTEST.CHAINTEST_CHAIN');
END;
STEP 5: Create the only Chain Step
BEGIN
DBMS_SCHEDULER.DEFINE_CHAIN_STEP(chain_name=>'CHAINTEST.CHAINTEST_CHAIN'
, step_name=>'STEPA'
, program_name=>'CHAINTEST.CHAINTEST_PROGRAM');
END;
STEP 6: Create Chain Rules
BEGIN
DBMS_SCHEDULER.DEFINE_CHAIN_RULE(
chain_name=>'CHAINTEST.CHAINTEST_CHAIN'
, condition=>'TRUE'
, action=>'START STEPA');
DBMS_SCHEDULER.DEFINE_CHAIN_RULE(
chain_name=>'CHAINTEST.CHAINTEST_CHAIN'
, condition=>'STEPA COMPLETED'
, action=>'END');
END;
STEP 7: Enable the Chain
BEGIN
DBMS_SCHEDULER.enable('CHAINTEST.CHAINTEST_CHAIN');
END;
STEP 8: Run the Chain whilst still connected as sys and observe that a Notepad window opens
confirming that the Batch file ran successfully.
BEGIN
DBMS_SCHEDULER.run_chain(
chain_name=>'CHAINTEST.CHAINTEST_CHAIN'
, start_steps=>NULL);
END;
STEP 9: Connect to the database as the CHAINTEST user and run the same command as in STEP 8 above.
Observe that even though you receive the message "PL/SQL procedure successfully completed." and do
not see any error messages that no Notepad Window is opened indicating that the Batch file was NOT run.
BEGIN
DBMS_SCHEDULER.run_chain(
chain_name=>'CHAINTEST.CHAINTEST_CHAIN'
, start_steps=>NULL);
END;

>
The Chain runs correctly when run via SQLPLUS when you are connected to the database as SYS but fails to run when you are connected to the Database as the User who owns the Chain.
>
Not true based on what you posted. The chain DOES RUN connected as SYS and when connected as the User who owns the chain.
You posted steps that show that SYS is the user that owns the program and thus the chain.
>
STEP 1: Login with sys as sysdba and create a new user
STEP 8: Run the Chain whilst still connected as sys and observe that a Notepad window opens
confirming that the Batch file ran successfully.
>
I don't see where you made any EXECUTE grant to user 'chaintest' that would allow that user to execute the program.
See the Usage Notes in the CREATE PROGRAM section of DBMS_SCHEDULER in the Database PL/SQL Packages and Types Reference
http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sched.htm#CIHEHDHA
>
For other users to use your programs, they must have EXECUTE privileges, therefore once a program has been created, you have to grant EXECUTE privileges on it.
>
Grant the EXECUTE privilege to user 'chaintest' and try it.

ITunes stop working when connecting ipod 4th generation on Vista

When connecting ipod 4th generation to a computer running Vista Ultimate, ITunes (version 8) closes. Windows provide the following message - iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Thanks!

i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)

Does Siri only work when connected to WiFi

Does Siri only work when you are connected to a Wifi? Mine does not seem to work through the 4G cell network.

It works over WiFi or cellular.
If you are using 4G cell network, are you using something like a Verizon MiFi 4510L to create a hotspot that your iPhone 4S is using?
There are other issues with Siri that are going on - perhaps that is what you are seeing?

HT3500 I cannot connect Macbook (OS 10.6.8) to Epson XP 400 wirelessly. It works when connected to a USB cable. Both printer and Mac are on the same network and Norton/symantic is OFF. The Epson will not show up in "add printer". is off.

I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.

Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.

NSS 324 still work when connection to ActiveDirectory lost?

Similar Messages

Maybe you are looking for