NSS322 (and others) Upgrade Instructions for MOZY users

Beating my head against the wall tonight. Upgrade to 1.5 went fine.
Tried to get over to QNAP and no go.
Long story short, do a 10 Second Reset on your NAS.
Then you will able to upgrade.
Cisco - you should add this to instructions. Across the board, a 10 second reset would probably be a good idea for everyone.
If you actually used the Mozy integration, reset it.
I use QNAP / Elephant Drive at home - LOVE it. Looking forward to getting this client on Elephant Drive Enterprise.
Good Luck !!

Jonathan,
Thanks for the post.
For the two features that are not available on QNAP (Mozy and Cisco Access Now), the best practice should be to deactivate it feature first.... Before transitioning to QNAP firmware.

Similar Messages

How to diable only one field enabled and other fields disabled for one user group?

Hi,
I have a form contains many fields. A group of users can add items using that form.
As per the user requirement I have created a filtered view and that filtered view can be seen by some other sharepoint user group but as per their further requirement the new sharepoint user group is only allowed to update Remarks field. All other fields
should be disabled for them.
In my idea, I have to create multiple forms and in one of it except Remarks field all should be disabled but I am unable to assign multiple forms to a single list.
Or how to make Remarks field enable to this user group and for other admin user group all fields could be enabled.
Hope I have expressed my question correctly.
Any solution would be appreciated.

There is no Out of the Box way to set permissions on each column, primarily due to the performance impact. The following thread provides some options,
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0794232-9bab-4cea-91d8-f311a793a863/how-to-set-column-wise-permission-in-sharepint-list-in-sharepoint-2010?forum=sharepointadminprevious
Dimitri Ayrapetov (MCSE: SharePoint)

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

Usually there is a upgrade path for current users of the software at a reduced price. I dont see anything like that for Lightroom 6. Will I have to pay full price just to upgrade to the new LR6 standalone version???

Usually there is a upgrade path for current users of the software at a reduced price. I dont see anything like that for Lightroom 6. Will I have to pay full price just to upgrade to the new LR6 standalone version???

The standalone upgrade is 79 US Dollars.
Go to Products, select Lightroom 6, click on Buy, select Upgrade instead of Full

Does Adobe Story Free have a Type and template for stageplay format and if so where do I click for it. In the Type button I could only find screenplay, TV script, Two column script, AV script and other, but not for stageplay?

Does Adobe Story Free have a Type and Template for Stageplay format and if so where do I click for it? In the Type button I could only find, Screenplay, TV script, AV script, Two column script, and other but nothing for Stageplay.

Does Adobe Story Free have a Type and Template for Stageplay format and if so where do I click for it? In the Type button I could only find, Screenplay, TV script, AV script, Two column script, and other but nothing for Stageplay.

Do I need antivirus and other Internet protection for my new iPad?

Do I need antivirus and other Internet protection for my new iPad?

Welcome to Apple Support Communities
You don't need any antivirus. You just have to be careful with the websites you visit

Instructions for Mac users?

Hello,
Are there step-by-step instructions available for Mac users filling out my form? Not everyone using the form is super techy, and people are still using Preview to fill out the form even after downloading the Adobe software because it's what automatically pops up. Because I use a PC, I don't know how to walk them through making sure they open and save the form using Adobe. Is there something out there that details how Mac users can open the form using Adobe and not Preview? I'd love to put instructions on our website now instead of waiting for more frustrated phone calls from people whose forms saved blank!
Thanks!

The issue usually is that PDF-s open in Acrobat/Acrobat Reader not in Preview, and the user can't use the features offered by Preview. In both cases the solution is to right click on the file and manually choose the app/program in which you want it to be opened. (Using Open in... feature) Of course, the Acrobat/Reader has to be installed not just downloaded.
I hope this helps.

Had Kernel panic and the app folder for my user is empty...

I was using a OWC estat express card and had my second kernel panic in two days (not using it anymore..) but when I restarted the app folder for my user was empty. Now the apps are still on Macintosh HD and in the apps stack in the dock.
So my question is does it matter if I just use the Macintosh HD apps and maybe even drag it into my user or will this cause problems.
Also, I don't have a backup at the moment bc I just upgraded to snow leopard last week...
Thanks!

The app folder for my user had all of my apps earlier today...!
I think that you are the one who is mistaken. All Apple apps are installed to the Applications folder at the root level of your hard drive, not the one in your user folder. If you moved them, some of them would stop working and all of them would stop being updated. Some third party apps will allow themselves to be placed in the user Applications folder, but some will not allow themselves to be installed anywhere other than the main Applications folder, and some will allow themselves to be placed in the user Applications folder but will not work properly if you do so.
So, there's absolutely no way you had all your apps in that folder.

Convert DVD and other video files for playback on iPhone, iPod, PSP, etc.

So, how are your holidays going? Or, if you're reading this on the weekend, how'd they go? Watching various sorts of DVD movies and videos is a better idea for a pastime during your free time. To make your holiday be more colorful with movies, I prefer to recommend an application to help you guys deal with different kinds of video resources, no matter the DVD files or footages shot by camcorders, or videos in formats of FLV, AVI, MKV, etc., in a word, the converted videos will be supported by whatever portable devices you have, including PSP, iPod Classic, iPod Touch, iPod Nano, iPhone (3G), iPhone, Zune, Zune 2, Blackberry, Nokia, Creative Zen, Sony Walkman, iRiver PMP, Archos, PS3, Apple TV, Xbox, iPAQ, Pocket PC, Mobile Phone, etc. The software is Pavtube Video DVD Converter Ultimate, which combines DVD ripper and Video Converter together, and enables you to edit and convert any DVD, video, audio and image files to other popular formats including MP4, 3GP, FLV, MPEG-4, AVI, MPG, MOV, 3G2, VOB, FLAC, MKA, OGG, WAV, AC3, M4A with super fast conversion speed and excellent image and sound quality.
The detailed user guide will be shown in the following part:
Step 1: Add video and DVD file
You are allowed to add videos to this program via clicking "Add Video", and add DVD files to it via clicking "Load DVD". DVD files can be loaded in three ways: "Load DVD ROM", "Load DVD Folder", and "Load ISO/IFO".
Step 2: Select output format and set destination folder
Videos and DVD files can be added to this program at the same time, after that, you can click the drop-down list of "Format" to select an output format for your portable devices. The format profile provides you with formats for iPod, iPhone, PSP, PS3, BlackBerry, etc. Meanwhile, you can click the folder icon at the end of "Output" to decide where to save the output files. Moreover, if you want to combine multiple files to be a single file, you can tick "Merge into one file".
Step 3: Set advanced settings
If you have the needs of adjusting video and audio parameters to make good control of the output file quality and size, you can click "Settings" button to do it, and all the options like codec, aspect ratio, bit rate, frame rate, audio channel, etc. are changeable on the following window.
Step 4: Start conversion
As soon as the above steps are finished, you can click "Convert" button to start conversion, the following ripping window will show you clearly about all the conversion info. After finished, you are able to find out the output files via clicking "Open" button.

We're not supposed to talk about DVD conversion according to the terms of service ...
So I'll assume these VOB files are from your HOME MOVIE DVDs you burned yourself and suggest the Videora iPod Classic Video Converter.
http://www.videora.com/
It's a really nice program that converts not only your HOME MOVIE DVD VOB files, but AVI, MPEG, and others. You can set the CPU usage from high to low with five settings, it has a queue which you can add multiple files to, and it will minimize to the taskbar for compact convenience. There are other Windows programs that do much the same, but I prefer Videora. Oh ... and it's freeware!!

How to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some users and allow the access for some users?

I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.
<location path="_layouts/15/InPlaceRecordsSettings.aspx">
    <system.web>
      <authorization>
        <deny users="*" />
      </authorization>
    </system.web>
</location>
<location path="_layouts/15/InPlaceRecordsListSettings.aspx">
    <system.web>
      <authorization>
        <deny users="*" />
      </authorization>
    </system.web>
</location>
When I tried the access on
:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.
Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
Thanks
Ramasubbu

You can't do it from OOTB.
_layout folder is accessible to the users if they have read access in any of the site even subsite.
You can modify *.aspx file, add your custom control which will check user.
[custom.development]

On-premise High-trust App and 401 (appredirect.aspx) for anomyous user

Hello,
I've developed a provider hosted App. The App can be used by authenticated and anonymous users. On my development platform the App is working in both cases as expected. Then I configured a new test Server (I did all the steps for high trusted Apps) and installed
the new App (Register app, created a new package in Visual Studio, did the changes for the TokenHelper class and so on). Now, the App ist working for authenticated users only. For anonymous users the appredirect page is asking for credentials. The SharePoint
log contains only a few Information about the problem:
client_id: i:0i.t|ms.sp.ext|..... and instance_id:
https://xxx/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
from query string
redirectLaunUrl after getting it from query string, web or app instance:
https://remote-domain-app/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
redirectLaunUrl after getting token replacement:
https://remote-domain-app/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
m_oauthAppId after NormalizeAppIdentifier() i:0i.t|ms.sp.ext|548...... Now getting app principal info.
decided that we need to do a POST to the app.
NOTHING MORE
The remote IIS web allows anonymous access and I can open the remote web site as anonymous user. Tried to set the the App Principal permission again, but without luck. When the remote web is stopped the 401 error still exist - no other error.
I've no idea what I can check next.

Hi,
You can use PowerShell to get the AppPrincipal.
$targetWeb = Get-SPSite "http://dev.my.com"
$clientID = "82ea34fc-31ba-4e93-b89a-aa41b023fa7e"
$authRealm = Get-SPAuthenticationRealm -ServiceContext $targetWeb
$AppIdentifier = $clientID + "@" + $authRealm
$appPrincipal = Get-SPAppPrincipal -Site $targetWeb.RootWeb -NameIdentifier $AppIdentifier
I suggest you try to delete the app and use the following PowerShell script to install the APP.
param
[string]$Web = $(throw '- Need a SharePoint web site URL (e.g. "http://portal.contoso.com/")'),
[string]$Source = "ObjectModel"
Write-Host -ForegroundColor White "-------------------"
Write-Host -ForegroundColor White "| App Installer |"
Write-Host -ForegroundColor White "-------------------"
Write-Host -ForegroundColor White "- "
#Global vars
$AppPackageName = "App.app";
#Loads powershell settings
Write-Host -ForegroundColor White "- Load Powershell context.."
$0 = $myInvocation.MyCommand.Definition
$dp0 = [System.IO.Path]::GetDirectoryName($0)
#Loads the SharePoint snapin
Write-Host -ForegroundColor White "- Load SharePoint context.."
$ver = $host | select version
if ($ver.Version.Major -gt 1) {$host.Runspace.ThreadOptions = "ReuseThread"}
if ((Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue) -eq $null) {
Add-PSSnapin "Microsoft.SharePoint.PowerShell";
[void][System.Reflection.Assembly]::Load("Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c")
#Imports the App package
Write-Host -ForegroundColor White "- Import app package '$AppPackageName'..."
$appPath = "C:\Projects\App\App\bin\Debug\app.publish\1.0.0.0" + "\" + $AppPackageName;
if ($Source.Equals("ObjectModel", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::ObjectModel);
elseif ($Source.Equals("Marketplace", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::Marketplace);
elseif ($Source.Equals("CorporateCatalog", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::CorporateCatalog);
elseif ($Source.Equals("DeveloperSite", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::DeveloperSite);
elseif ($Source.Equals("RemoteObjectModel", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::RemoteObjectModel);
$spapp = Import-SPAppPackage -Path "$appPath" -Site $Web -Source $sourceApp -Confirm:$false -ErrorAction SilentlyContinue -ErrorVariable err;
if ($err -or ($spapp -eq $null))
Write-Host -ForegroundColor Yellow "- An error occured during app import !"
throw $err;
Write-Host -ForegroundColor White "- Package imported with success."
#Installs the App
Write-Host -ForegroundColor White "- Install the APP in web site..."
$app = Install-SPApp -Web $Web -Identity $spapp -Confirm:$false -ErrorAction SilentlyContinue -ErrorVariable err;
if ($err -or ($app -eq $null)) {
Write-Host -ForegroundColor Yellow "- An error occured during app installation !"
throw $err;
$AppName = $app.Title;
Write-Host -ForegroundColor White "- App '$AppName' registered, please wait during installation..."
$appInstance = Get-SPAppInstance -Web $Web | where-object {$_.Title -eq $AppName};
$counter = 1;
$maximum = 150;
$sleeptime = 2;
Write-Host -ForegroundColor White "- Please wait..." -NoNewline;
$url = "$($Web)_layouts/15/appinv.aspx?AppInstanceId={$($appInstance.Id)}"
$ie = New-Object -com internetexplorer.application
try
$ie.visible=$true
$ie.navigate2($url)
while ($ie.busy)
sleep -milliseconds 60
$trustButton = $ie.Document.getElementById("ctl00_PlaceHolderMain_BtnAllow")
$trustButton.click()
sleep -Seconds 1
Write-Host "App was trusted successfully!"
catch
throw ("Error Trusting App");
while (($appInstance.Status -eq ([Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installing)) -and ($counter -lt $maximum))
Write-Host -ForegroundColor White "." -NoNewline;
sleep $sleeptime;
$counter++;
$appInstance = Get-SPAppInstance -Web $Web | where-object {$_.Title -eq $AppName}
Write-Host -ForegroundColor White ".";
if ($appInstance.Status -eq [Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installed) {
Write-Host -ForegroundColor White "- The App was successfully installed.";
$appUrl = $appInstance.AppWebFullUrl;
Write-Host -ForegroundColor White "- The App is now available at '$appUrl'.";
Write-Host -ForegroundColor White "- (Don't forget to add app host name in your host file if necessary...).";
Write-Host -ForegroundColor White "- "
else {
Write-Host -ForegroundColor Yellow "- An unknown error has occured during app installation. Read SharePoint log for more information.";
More TroubleShooting Tips for High Trust Apps on SharePoint 2013
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

Allow connection to RDS applicatoins and restrict RDP connection for domain users

I have configured RDS setup, with the following Roles: RD Web Access, RD Gate Way, RD Connection Broker, RD Session Host and RD Licensing.
the problem is that the domain users can't run the published applications unless I add the "Domain Users" group into the remote desktop users on the RDS servers, but now all domain users can connect RDP to the RDS servers.
so we need domain users to connect to the RDS published applications and restricting them from connecting RDP to the RDS servers, in addition I can see that internal servers are accessible from outside through the RD gateway server.
any ideas ?

Hi,
Thank you for posting in Windows Server Forum.
For a test you can create one group, assign the specified user under that group. Add that group under “Remote Desktop User” local group. For getting access to published Remote Application you can simply assign\add the group under collection properties of the
application and that user can get access.
For restricting user to server remotely, you can add that group of user under “Deny logon through remote desktop service” under User Rights assignment. Also you can check “Deny
New User Logons to an RD Session Host Server” settings.
Hope it helps!
Thanks.
Dharmesh Solanki

How to specify default desktop and/or startup items for EVERY user login?

Hi
My work iMac is

+Oops! User error! Anyway, here's the rest of my message...+
The iMac I use at the university where I work connects to Active Directory for authentication - there are no local user logins (apart from the admin account of course).
I'd like to know how to set the default items for all user logins. Specifically, I'd like the system to automatically create an alias on the desktop to a shared folder for every new user login, or automatically open that folder in Finder when logged in.
Though I'm the main user, if I'm not around other people may require access to the stuff I do for the multitude of projects I work on for a department of 30 people, and as everyone else uses a PC and only a few are Mac savvy, I'd like to make it as easy as possible for the poor dears to find the files. (We have a shared network drive where I can put some stuff but unfortunately our allocation is not very big!)
Thanks.

Anyconnect client and clientless connections hang for two users

ASA 5525, v. 9.1(5)19
Anyconnect client 3.1.02026
I have two users who are unable to connect via the AC client or clientless through the web portal. Using the client, it will get stuck in a loop of "checking for updates". On the portal, the connection will proceed to the point of "Cisco Secure Desktop successfully validated... Success.. Reloading..please wait." Then it hangs there.
The issue occurs for the user regardless of which company laptop she logs onto. A help desk tech can use her laptop and successfully connect, but she cannot connect on her own laptop or on another laptop. (Same for the other user.) So the issue doesn't seem to be related to her laptop or the AC installation. (Help desk did reimage her machine early in the troubleshooting process before they realized that the issue seemed to follow the user.)
I've updated the hostscan file - no change in results. Client and clientless connections seem to be working fine for all other users. We're stumped. Suggestions, anyone? thanks!

The LDAP should be server folks -- Active Directory. Chances are whoever manages the ASA's should have access to at least look in Active Directory to look that up. If they don't they need it.
I obviously don't know a lot about what devices you are using, but if you are using ISE, there should be some type of MNT device (Monitoring and Troubleshooting) -- which is collecting the logs and, hopefully, sending them to some type of syslog aggregate collection tool (splunk?).
Otherwise, there should be a device called a CAM (Clean Access Manager) that is collecting logs -- which may also be propagated to a syslog aggregate tool -- although with CAM's, you can pull the reports right out of them in a comma deliminated file (.csv) and go through them that way.
-- The thing that gets me is that it happens to two users no matter what computer they try to connect from, no matter what network they connect from, and other users can authenticate and gain network access on those same devices.
-- That is why it is rather perplexing. Pretty much saying it has to be something with:
- the IP pool they are getting an IP from
- their AD credentials
- their username
- something along those lines, if the information provided was fully accurate.

NSS322 (and others) Upgrade Instructions for MOZY users

Similar Messages

Maybe you are looking for