NSS4100 RAID DOES NOT START Please check that all components are present

Hi, The NSS4100 storage system failed to start the raid10.
The message is:
Failed to start RAID
Please check that all components are present
All the disks are present as you can see in the attached image.The system has been restarted twice. Is there a possibility to start again the raid without losing data?
Thank you,Dan

Hi.
I have exactly the same problem which is discribed first in this Thread.
We have a NSS 4000.
4 HDs - RAID 5
SATA 2 was faulty an the RAID was degraded
There was no problem with the data on the Volumes. I pulled the disk on SATA 2 (which was the one which no longer was in the RAID). Ich pushed it in again. Then on RAID site i clicked on 'Edit' and then on 'Add'. I thought the RAID would then synchronize the fourth HD and the status is going to be 'Running' and we are safe of one harddisk failiure.
Log:
2010-01-04 13:04:49 RAIDA : Rebuild Finished
2010-01-04 13:04:46 RAIDA has failed.
2010-01-04 13:04:46 RAIDA has suffered a drive failure.
2010-01-04 11:27:15 RAIDA : Rebuild Started
While the process was synchronizing i could access the data on the Volumes.
But after 90 min the RAID was broken. No Access on the data - no shares. The Status is 'Stopped'. All 4 HDs are Online and the Health Status is 'Passed'
If i click on Start: "Failed to start raid. Please check that all components are present."
I have no saved configuration because i thought that there will be no problem with this 'basic procedure' of a RAID device.
Even if the HD is broken the RAID should be doing his job in 'Degraded' mode. Thats because i am using a RAID.
So am i right that our data is gone because only one HD from a RAID 5 seems to be broken?

Similar Messages

I use windows 7 download lightroom 7 trial does not start please help

i use windows 7 download lightroom 7 does not start please help my adobe id [email protected]

Maybe try to download Lightroom 4.1 here:
https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
Lightroom 7 does not exist
Frans

Phase/operation in process order 1000028 does not exist (please check entr

Dear All
Kindly help me out in the following scenario
I am entering confirmation through COR6N, after selecting process order no. system is giving this error when i click on actual data. However there is only one phase and one operation in master recipe. Furthermore earlier I ran MRP, generated capacity requirements, converted planned order into process order, dispatched process order via CM22-leveling and now i am trying to enter phase confirmation.
waiting for your response..
Regards
Navaid

Hi,
Please check your operation/phase control key in your recipe (C202), may be it will be PI07 (no confirmation).
If yes, you can enter the phase number manually in COR6N
Thanks,
JK

My Imac Does not start even after follow all recommendations of the community. I am very desappointed with Apple. Please Advice

I have a IMac 27" Core I7 Mid 2010 w/ Upgraded OS Mountain Lion 10.8.5 but I can't start it even after follows recommendations of the community. Please Advice
I am very desappointed with Apple

Imagine calling to your Doctor and saying "I'm unwell. Please advice (sic)"? What would he say? I think he'd start by asking a for a whole lot more information, wouldn't he? So, same here.

I can't share my Final Cut X project : the process does not start. it seems that the project files is not found by the application. why ?

I crate a project on Final Cut pro X. A 52 mn movie, that works really good on the time line. But I can't export it on DVD or IPad or other devices. The process is engaed but without effective effect. After one hour no result. It seems that the "project" files is not physically recognise by Final Cut export routine. Is anybody had such a bad surprise ?

Tell everyone what type of video (format) you shot in the camera, what are your project settings and exactly what settings are you choosing when you use Share.

When I connect the iphone does not start automatically Itunes Please help me

when I connect the iphone does not start automatically Itunes
Please help me
How to solve this problem that I have

i've had a few issues like this.
I've found that it is an issue with items that are already on your phone.
several troubleshoots.
1) uncheck everything from syncing (apps, music, tv shows, movies, podcasts, etc), try to perform a sync, it most likely will work. Then, sync after checking each item individually (check the sync box for videos, then sync, check the sync box for podcasts, then sync, check the sync box for music, then sync, etc). One of two things will happen, 1) you will fix the problem, or 2) you will identify exactly what part of the sync setup is the culprit.
2) if the above doesn't work, I've found that it is likely an issue with files that are on your phone but your phone doesn't exaclty recognize (for example, I had copies of music on my phone that didn't show up in the music app, I went in on itunes and manually deleted those songs from my phone and that fixed the sync). to do this, check the "manually manage music and videos" box at the bottom of "summary" while your phone is connected to itunes. Then, go to the left hand pane in itunes and find your iphone device, click the drop-down arrow that shows all the categories for media on your iphone. Go to the music category in your iphone on itunes and delete all the music that shows up. Try to perform a sync - it likely will work. After this, you can uncheck the manually manage music box and re-sync your phone as normal
let me know if either works

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
This started since the latest update!!!!!!!!!!!!!!

Hi Alkaf,
Welcome to Apple Support Communities.
It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
-Jason

On iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

Help
I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

Hello.
Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
Information about error -50 and downloading videos
http://support.apple.com/kb/TS1583
If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please advise

I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

I have an ipad (IOS 7.1) and downloaded latest version of itunes (11.1.5.5) and downloaded itools (1.8.2.8) but my Itools does not work and message that your itools is not compatible with itunes so please want your comment for that.

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

HT1926 download does not start i am using windows 7 and checked the pop-up blocker

download does not start i am using windows 7 and checked the pop-up blocker

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

PC does not start when pressing the power button, After that starts automatically like a ghost!

I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
Again when i shutdown and leave it for sometime, and still the problem is unsolved.
Please Help
This question was solved.
View Solution.

he figured out you dont just shut the lid and walk away, you use Windows shutdown
click Kudos to say thanks if I helped

Plz help!!!!! i have iphone 3g and i have chose the option of reset to factory shipped settings ... but now it does not start .. it just shows apple logo thats it .... plz can anybody help me

plz help !!!! i have iphone 3g and i tried option to reset my phone to factory shiped settings ..... but now it does not start even .. it just shows apple logo again n again ..... after that i went to recovery mode as stated by apple support and did things as stated .... but then i got the message iphone cannot be restored due to some eror 1015.....can any one please help me .. i will be highly obliged ...

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use...

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

NSS4100 RAID DOES NOT START Please check that all components are present

Similar Messages

Maybe you are looking for