NSU bug detected and how to solve!

Hi Friends!
I want to share something with you, that make me lost a lot of time.
I have an N97 NAM RM-507
I tried to update the phone via NSU several times, with different luck.,
1st time: Completely death phone, and i have to pay for get it repaired cause i bought it in other country.
2nd time: I did it via OTA with a trouble free process.
3rd: Came v20 fw, but with no luck, it can be upgraded only via NSU.
OK i read all of the posts, install it on XP, with a clean install, etc.
Tried on different laptops, with xp installed from the scrath, keep getting erros, i even tried making it inside a virtual machine but always the same
But, one day, (After several) i receive a laptop with XP, but SP2, instead of SP3, and guess what?
I can install it without problem.
How can be possible that nokia, didn't realize of this bug, making people lose money (Like me) and time (Again like me)
Maybe you say, you have bad luck, but this is not the case because there's a los of people having problems trying to upgrade their Nokia phones.
I used the very last version of NoKia Pc Suite, and NSU.
I hope this can save the time that i've wasted for other people.
If someone find this important, please stick it, before more people get their phones ruined!
Cheers!

Similar Messages

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
     Tap Settings > General > Reset > Erase all content and settings.

Saving from Safari as PDF results in an icon with 0 byte volume that fails to open as it is "damaged" Why and how to solve?

saving from Safari as PDF results in an icon with 0 byte volume that fails to open as it is "damaged" Why and how to solve?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Thanks

Help urgently needed, I have installed Logic Pro 9, since then my Final Cut Pro X keep freezing. Anyone what is wrong and how to solve it? I desperately need help on this. Apple support says I have to pay £85 for to help me. Thanks

Just a word of advice. Never ever use the word "urgent" on this forum

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

TS1506 In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ??? iPad 2, iOS 7

In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7

When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

HT201363 Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104569)

Iphone 6 automatically turn on even not connect to charger, why would this happen and how to solve it?

iphone 6 automatically turn on even not connect to charger, why would this happen and how to solve it?

I'm not an apple expert or anything, but after hearing this from a coworker (and doing a quick google search) many of the generic chargers do not work in the 5s (especially after the most recent update.) I'm thinking this may be the problem in your case...the charger is not working so the phone just needs a good charge from either an apple certified charger or a generic that will actually work with the phone. I've read some people are able to pull the cable out, turn it around and then plug it back in facing the opposite direction to get it to work. Many have reported, however, that even when this remedies the cable issue, its still won't charge the phone while it is completely dead (which is likely the case since it won't power on at all.) So if you haven't fixed your problem by now, go buy a new charger and see what happens. You might be able to go into and apple store and borrow a charger there for a few minutes to see if this actually IS the problem. That way you don't waste your money before buying.

What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? And how to solve it ？Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png ‏59 KB

duplicate post
LabVIEW Champion . Do more with less code and in less time .

HT201210 what is error 409 and how to solve the error

i was trying to restore my iphone but it give an error 409
what does this mean and how to solve it

Why apple technical support will help the apple customer to solve this problem ??????????
the complication of apple products let most of my county's people use SAMSUNG phones

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

Processchain errors in Production and how to solve those issues

Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
Thanks

Hi
Table of Contents
1.     Time stamp error     2
2.      PSA error records     4
3.      SID not found for characteristic     7
4.      Error calling number range object     8
5.      Trfc error     10
6.      ALE REMOTE lock     13
7.      Delta fails     14
8.      Deleting setup table     18
9.      How to run statistical setup for different Application components     19
10. How to do selective deletion     22
11. Roll up     24
11. Compression or collapse     25
12. How to do Attribute change run     27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a.     Remove failed request from data target by making its QM status into red.
b.     Check into sm12 and delete the lock, usually the BASIS deletes them
c.     Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success.

NSU bug detected and how to solve!

Similar Messages

Maybe you are looking for