NSU v1.4.23 "Missing Software Components"

Nokia Software Updater fails when it start. After a couple of minutes it throws an error:
Missing Software Components
Critical software components are missing.
Please reinstall.
I am running Windows Vista 32bit.
I have uninstalled, rebooted and reinstalled several times.
There are no errors in the Windows EventLog and I cannot see an error log file.
I have noticed that nsl_host_process.exe does not start.
PC Suite runs perfectly.

You will also get this if the Windows internet connection sharing is switched on, you should disable ICS on your computer from the network connections.
There are many posts with this message appearing:
/discussions/board/message?board.id=swupdate&message.id=39814
/discussions/board/message?board.id=swupdate&thread.id=23928
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Similar Messages

NSU v1.4.14en- missing software???

Fed up by nokia tech support who don`t get back to me after 12 (!) emails and phonecalls!
Is there a way to get a complete list over files in NSU? And can anyone e-mail me a list of THEIR (working!) NSU so I can compare???
Upon startup of NSU all I get is: "MISSING SOFTWARE, critical software components are missing. please reinstall"
(apparently a "common" problem with Vista home premium"
And I've tried uninstalling EVERYTHING from nokia, re-installing with firewall off, re-installing NSU with wire-less router off(and hence ALL local and external networks off), putting those annoying little files from "Nokia Software Update FAQ >>" into the approved program list for my firewall, making sure I don't have two NSU's running,running it in XP compatible mode, running the .exe files in XP compatible mode and in administrator modus, hitting my computer, sacrificing a goat to the PC-gods etc! What am I missing???
What software am I missing???
Maybe it will run if I install it in another language???
I'll try Norwegian but PLEASE!!! help me out!!!
I want FW v20 SOOOOO badly!
Help (that actually works) will be rewarded with eternal gratitude and praise!!!

OK here's the guide NOKIA gave me. I had already tried it 646 times, BUT now it's a new version of PC suite in the link below! Maybe that would solve the problem????
sadly no....
Maybe it helps others though...
"Thank you for emailing Nokia Care.
With regard to your email, I suggest that you install Nokia PC Suite prior to using Nokia Software Updater as this would ensure all necessary driver are correctly installed.
Please ensure that you have administrator access to your computer, and you should not be on a secured server e.g. office server.
Kindly refer to the following steps:
1. If you are connected via cable, please unplug the cable from the computer then mobile phone.
2. Remove all Nokia software from your computer. Select the "Start" button on your computer, then go to "Control Panel". Inside the "Control Panel", click on "Classic View" and then please double click "Programs and Features" and scroll down to Nokia PC Suite and select "Uninstall/Change" to uninstall it. Remove all Nokia software that come up in the "Programs and Features" list.
3. Restart your computer. When the computer has started up, disable all firewalls and antivirus.
4. Log on to http://europe.nokia.com/A4144903. Click download and then proceed to "Save" (not "Run") the PC Suite file to your "Desktop".
5. Upon completion of downloading PC Suite, you can click on "Run" to begin installation.
6. Once installation is complete, "Welcome to Get Connected wizard" window would prompt. Select you connection type - cable connection.
7. Please only plug in the cable when the wizard prompts you to do so.
Once you have established a connection between your phone and PC, kindly proceed to use "Update phone software" on Nokia PC Suite."
NB! THE NEW VERSION OF PCSUITE KEPT CRASHING TO ME!
Load of rubbish isn't it? NOKIA has produced a phone with technology exceeding your wildest dream but cannot make a software program to run with the latest PC OS from MS, the biggest and most used OS!
Hope it helps some of you...

Missing permission to import software components! --- Solved

Hey,
Can anyone tell me which roles or groups need to be assigned to a user to be able to import software components from the SLD into the integration repository as well as import external definitions (like xsd etc.) into the repository?!
Because if I try the import I got an access denied message.
Thanks
Matthias
PS: Solved the problem by giving the user SAP_XI_Developer and SAP_XI_Administrator permission ...
Message was edited by: Matthias Born

Hi Krishnan,
This is an issue of the SP3, you should apply SP4. The better thing is also to apply SP5 and SP9.
Regards,
Vincent

"Missing Installed Components - Please Reinstall"

"Missing Installed Components - Please Reinstall"
I get this error-message when starting up the update software..
It doesent matter if I have my Nokia E65 connected or not.
I use Symantec Security, but I can't seem to find any problems there either.
Any clues??
Norstorm

You seem to suspect that it could be connected to your Symantec Security. Why don't you try disabling Symantec and see if that makes any difference.

Software Components for BW-IP and PAK

Hello Experts,
I would like to know what all would be different Software Components which we need to install to work with BW-IP and PAK.
I believe that SAP BW7.4 SP5 is the one to work on BW-IP. Is that the latest version ?
If I'm not wrong, we need BPC license for PAK. Does that mean we need to install BPC 10.1 ?
Let me know, if I'm missing any software components.
Thanks,
Jomy

Hi Jomy,
for BW-IP with PAK you only need BW on HANA, most recent version is 7.40, SP06. For PAK you need a BPC license but this does not mean that you have to install the BPC Add-On.
With BPC 10.1 BW-IP with PAK objects can also be used in BPC Environments of type 'unified'. Thus you get BW-IP, PAK engine with BPC features like work status, BPFs. For more details cf.
Unifying BPC NW and BW-IP
Regards,
Gregor

Missing Bluetooth Components on my Palm TX

I recently started getting a (Sys5050) (0,841) error message on my palm TX. I followed advice from this blog community and performed a warm reset and it took the problem away. Yea!
Not so yea! Now I find out when I want to connect to the web via Bluetooth that I am "Missing Bluetooth Components" and that I should reinstall the software.
What software? The Bluetooth came with the TX. HELP! PLEASE!
Thanks in advance
Bruce
Post relates to: Palm TX
This question was solved.
View Solution.

Then your next task is a Hard Reset. This will erase the device, and reload all the original software.
Once the Hard Reset is complete, test the BlueTooth radio to see if all is better. If so, do a Hotsync and see if the problem returns. If it returns, we'll try something different.
To perform a Hard Reset: (Palm Knowledgebase article #887)
http://kb.palm.com/wps/portal/kb/common/article/887_en.html
While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Missing iMovie components & Apps after Archive & Install

I recently did an archive & reinstall. Opening iMovie for the first time after it gave me the following error:
"Missing Quicktime Components: The QuickTime components necessary to view, edit, import, and export several kinds of movies are not installed. These components are included with the iMovie installer; please re-install."
iMovie still opened but I didn't want to entrust it with importing files. So I went here: http://www.apple.com/downloads/macosx/apple/application_updates/imovie712.html and downloaded the latest iMovie and tried to install it. But I got this error:
"Alert: An eligible iMovie application was not found in the location /Applications."
Huh, that's weird. So I looked in my Applications folder and not only is iMovie not there, but neither is iPhoto, or iDVD!
I suppose I could bring them back with the versions in my Time Machine prior to the archive and reinstall, but would they come whole? Would it be better to reinstall these from the Installation DVD's? WHo knows what else is missing? Guess that is what I get for using the Leopard Installation DVD I got for my G5, rather than using the disks that came with this MacBook Pro.
Any advice?

"Missing Quicktime Components: The QuickTime components necessary to view, edit, import, and export several kinds of movies are not installed. These components are included with the iMovie installer; please re-install."
The modal message is telling you that some of the components used by iMovie for import/editing are missing and that the easiest way to re-install them is to re-run the iLife '08 (or more specifically the iMovie '08) installer package. For instance, Imovie '08 installs a special MPEG-2 component that converts normal MPEG-2 content from a DVD or HDD camcorder to all I-frame MPEG-2 content (the equivalent of Motion-JPEG video) which can be edited in iMovie '08. The component also allows you to view such MOV files in the QT Player others others without iLife '08 installed would not be able to view them.
iMovie still opened but I didn't want to entrust it with importing files. So I went here: http://www.apple.com/downloads/macosx/apple/application_updates/imovie712.html and downloaded the latest iMovie and tried to install it. But I got this error: "Alert: An eligible iMovie application was not found in the location /Applications."
Re-install from your original installation disks. This area is for upgrading earlier versions of iMovie '08. If you are already running v7.1.4, the the software on this page will not allow you to "upgrade" your software since it is looking for specific older versions. Besides, these upgrades may assume the additional components are already install not may not even bother to check for them.
Would it be better to reinstall these from the Installation DVD's?
Yes.

Remote target is missing required components

Hello,
I am working on data acquisition using labview and cdaq 9191 chassis + 9234 module by using DAQ Assistant.
The DAQ Assistant captures data from the chassis, feeds it into a shared variable and then the VI deploys it over a network.
This worked perfectly about 4 months ago. After That I uninstalled LabView and other drivers.
After reinstalling the whole setup again now when I create a new project and try to put DAQ assistant in the VI, it gives an error - "the remote target is missing required components".
What might have caused this problem?

Hey Egupta,
What versions of LabVIEW and the DAQmx driver are you using? You can check this by going into Measurement & Automation Explorer and expanding out the Software tab.
Are you sure that you installed the DAQmx driver after you installed LabVIEW? It might be worth reparing the driver if you are unsure and we determine that they are compatible versions.
KiraT

GarageBand: missing software instruments & loops won't download

Hi,
Recently I've bought a 15' MacBook Pro with OS X version 10.8.3 installed on it(and I've updated it to version 10.8.4) and tried to download [missing software
instruments and loops] for GarageBand, but that update for the additional GarageBand contents couldn't be found on App Store's update page even after trying
several times. Does anybody have a solution or similar experience? Answers would be greatly appreciated!

I recently had the same problem when I upgraded to Garageband '11. There are many posts and answers about this issue on the forum, but the one that worked for me was also the simplest solution. When you get to the Updates window on the App Store and it says it doesn't find any updates, hit ⌘-R to reload. When I did that, the additional instruments and loops download appeared in the Updates window and I was able to download them.
If that doesn't work for you, search this forum. There are many more possible solutions. Good luck!

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Error while trying to import Software components from SLD.

Hi Gurus,
Need Help.
When we are trying to import Software components from SLD we are getting following error. Could not read list of software component versions from SLD. In Description i am getting following two points.
1. Could not read list of software component versions from SLD (COULD_NOT_READ_SWCV)
2. User credentials are invalid or user is denied access
We have tried following
1. LCRSAPRFC and SAPSLDAPI are working fine.
2 SLDAPICUST is ok
3. In nwa connections are available for LCRSAPRFC and SAPSLDAPI.
Request you to let us know how to resolve this issue.
Thanks in advance.

Hello ,
Can you check below roles assigned to the user id?
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
Thanks

Message interface does not exist in any software components

Hi masters,
I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
note: I have read all the posts about this problem but nothing has solved it.
I will describe more or less how is my SLD.
First all, my Technical System is an Web AS ABAP (non a third party).
I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
I have checked the GUID, and that's good.
NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
Regards and thanks

did you mean:
SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
if is this, I have already done this, and still doesn't works.
Thanks

Message interface does not exist in any software components installed on th

Message interface does not exist in any software components installed on this business system.
hello,
When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
I have deleted the business systems and the technical system and created them again, but no result.
The product and software componets are in the technical sytem and business systems.
Any help would be usefull.
thanks,
Job

Hello!
If someone will search in the future for this error, here is the solution:
The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
Kind regards,
Klaus

Message interface does not exist in any software components installed

"Message interface does not exist in any software components installed on this business system"
Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
Tive que configurar o XPath na mão para todas as SEFAZes!!!
Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
Alguém já possou por isso?!?

para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
(SENDER)
<?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
(RECEIVER)
<?xml version="1.0" encoding="UTF-8"?>
<nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

NSU v1.4.23 "Missing Software Components"

Similar Messages

Maybe you are looking for