Nsurlstoraged - DiskCookieStorage continuously changing policy of File binary

I am having a problem with "nsurlstoraged - DiskCookieStorage changing policy" continuously when Safari is being used. This problem was recently discussed in this forum by Linc Davis in response to a question by Dreaming void. I checked the box to follow the thread and indicated I had this problem, too. Inadvertently, as I received emails on the thread, I thought the emails were directed to me and I "thought" I was participating in the thread. I am sort of new to this and I misinterpreted what was happening. Finally, I received an email from Linc Davis explaining that I was not part of the thread, and that I should start my own. I apologize for my error. I do need help.
I have a Mac Pro late 2013 and about 2 days ago the console started filling up with thousand of messages: "nsurlstoraged[286]: DiskCookieStorage changing policy from 0 to 2, cookie file: file:///Users/fwolfe/Library/Cookies/Cookies.binarycookies" The CPU load becomes very heavy in the activity monitor and it is difficult to use the system.
I have been doing the suggestion Linc Davis (in error, as I explained). I wonder if it would be possible to start this new thread with link Davis.
I have tested the system as a guest and in "safe mode" with problem continuing during and after these tests.
Thanks, and my apologies for misunderstanding.
Fred

Similar Messages

Replace sourcefile small or big change in source file if machines are already received old policy how they behaves

we have deployed package or task sequence into static or dynamic collection with always re-run or re-occurrence re-run settings . issue is need to replace sourcefile small or big change in source file setps need to perform stop advertisement and replace
new content update source version (update package) re-enable advertisement. now question is if machines are already received old policy how they behaves and if machines already installed package\task sequence how they behaves.

Peter is correct, however I think the crux of the question is what will the client do when the source files are updated in relation to existing deployments. The answer is nothing. Source file changes do *not* trigger deployments to be rerun. If the deployment
has not run yet, as Peter noted, the new files will get downloaded, however, if the deployment has already been enforced, there's nothing to be done as the point of the deployment to run the appropriate command-line. Once that's been done, a source file change
is meaninglessness.
Jason | http://blog.configmgrftw.com | @jasonsandys

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q

FP-module don't use new *.iak when changing to iak-file on runtime

Hi folks,
I'm using FP1001 (RS-485) communication modules with a bank of FP-AI-110
(8 x AI) and FP-SG-140 (8 x StrainGauge) with LabVIEW 6.1.
Since I need to change input ranges of the modules on runtime
(autoranging feature) and there is no vi to manage this, I created a
couple of iak-files with the FP-explorer (V3.02, build 177), where I set
the approbiate input ranges. My application then monitors the analog
input data of the modules and changes the used iak-file as needed to
prevent over- and underranging.
When changing the iak-file the current session is closed (FP-Close) and
the next session is opened with FP-Open and Create Tag, continuing with
FP-read.
My application does its' job well, since I monitor the currently used
iak-file, range and the fact that sessions get closed before opening the
next, but the FP-modules won't restart using the new range settings,
after the following session is started with the other iak-file. The
modules allways keep the previous settings.
So whats wrong?
Btw.
I noticed FP-Explorer also has its problems changing module- ranges,
after loading a new iak-file.
So I startup the FP-Explorer with a iak-file for a low range setting
(module input range) and increase the input voltage at the module input
just as much that a overrange occurs. Then I load another iak-file with
higher range-settings. FP-explorer shows the higher range in its range
column, but when monitoring the module input values, overrange is showed
first. After restarting monitoring, the input values are showed
correctly.
Heres' the problem:
Loading the previous iak-file again, the overrange should show again,
since the input value was left at the higher value, as set before. But
no overrange shows! FP-Explorer monitors the higher input value which
istn't within the input range, showed in the range column.
So FP-explorer hasn't switched down the modules range!!!
Restarting monitoring, or reloading the iak-file doesn't change
anything. Restarting the FP-explorer shows overrange again when starting
to monitor values. Restarting monitoring lets the FP-explorer continue
to monitor the higher input value, which is above the range showed in
the range column.
The only thing which helps all the time, is to open the devices context
menu, then to click on "Edit this device", and click on channel
configuration. Then a pop-up window asks which setting to use (file or
device). If I click on file, all the settings of the current used
iak-file are used correctly.
Ciao,
Rainer

Rainer,
The FieldPoint IAK File is used in application programs (e.g. LabVIEW, LabWindows/CVI, OPC) for channel names, handle information and scaling information. FP Open.vi launches the FieldPoint Server with the specified IAK file, and uses the information in the specified IAK file for scaling (serial modules require scaling on the computer, ethernet modules scale the data in the network module) but does not re-configure the IO modules according to the IAK file. Likewise, opening an IAK file in FieldPoint Explorer does not reconfigure the IO modules to match the IAK file. The only times that settings are synchronized between the IAK and the modules are when a)the Find Devices command is issued (config from modules loaded), b) the Channel Configuration wi
ndow is opened (file or module config can be choosen) or c) a Snapshot command is issued (current settings of modules are stored).
Currently, the FieldPoint Server VI's do not allow dynamic re-configuration of ranges. If you wish to dynamically reconfigure your module ranges, you will need to use the FieldPoint Optomux VI's, which are located under the RT sub-palette of FieldPoint. They are installed by default only if you have LabVIEW RT, so you may need to re-install FieldPoint Explorer (custom install) to get them. For more information on the Optomux commands, please see the FP-1000/1001 Programmers Reference Manual.
Regards,
Aaron

Can't change printing prefs (encoding:binary) in Photoshop CS3 Mac Intel

Hi
My version of Photoshop is in German, so I don't know if the translation is correct...
If I open the print preview window (File>Print) and change the print encoding to JPEG, it switches it back to Binary when I press "finish" or "print...". I must be able to change this, printing using binary is not an option.
This issue exists since we switched to Intel Macs. The problem appears on a fresh mac os x 10.5.6 installation with just Photoshop installed. And it's only on Intel Macs, on PPC Macs we do not have this problem.
I called the hotline and they confirmed this issue, but couldn't help me because I got an MLP-license.
Export of system-profiler data:
System.rtf
What can I do? Thanks for your help!
Manuel

Jim, I have been on the phone with Adobe support since I posted my last message (a long time!) The tech agent just discovered the option in Photoshop preferences and I came back to post the solution to the problem.
If I had waited for your answer I would have saved a lot of time!
Thank you for responding. Hopefully if someone else runs into it they will find this thread.

Can we change the default file format 'BIN' of system to 'ASC' using table

can we change the default file format u2018BINu2019 of system to u2018ASCu2019 using table TSOPE
if possible:will it affect any system performance

Hello Vincent,
BIN(Binary) is default selection.and so we have to select ascii.to make myself more clear my queries is like:
first for setting ascii what we need to enter in text box that is against ASCII.and
secondly if we select ASCII will it affect system performance in anyways.

MPEG Layer 3 audio files have changed into MP3^^ files,What is ^^

MPEG Layer 3 audio files have changed into MP3^^ files,What is ^^ and why wont the music files play anymore??

I reinstalled OSX on my macbook which previously played all avi files with no difficulties. Now I am having difficulties playing Avi files with quicktime PRO that use the Mpeg layer 3 codec. I have done the following with no success: downloaded flip 4 mac, divx, xvid, 3ivx, Xvid codecs, changed MIME settings, and deleted and reinstalled.
Depending on the specific version and sometimes the ordering in which they were installed, you may have created a conflict among the components here. While most current VidX components should be able to play MPEG Layer-3 audio, v5.1.1 is the only free VidX codec that is bi-directional. If that is not a problem, then I would recommend you remove (or "hide") all components in the main "Library > QuickTime" folder. Next I would determine if one (or more) of the AVI associated components can actually play the specific files mentioned on their own. You do this by installing a compenent to be tested, opening the player with one of the problem movies, and checking for correct audio and video playback. Log your results, close the player, remove the tested component, and move on to the next component to be tested. Once you deterime which component(s) may function correctly, I would then move on to determine which specific components are in conflict by repeating the tests but leaving the components installed after each test. In this case start with a component that is known to work and is the one you most desire to use (if more than one works). If the player stops working, then you have located a potential conflict. Set the offending component aside and continue testing until all components have been tested and are either installed or set aside. The last step is to simply evaluate component alternatives and configure you system for those files most often played. In my case the VidX v6 Pro components did not seem to get along with the 3ivX D4 v4.5 and/or Casio AVI and/or XVIDDelegate component combination.

Un-authorised changes to saved files?

I am finding that files are either going missing or old files that I have previously moved/ deleted are re-appearing.
It seems as though there is some sort of auto-restore from a previous back up, but I don't use any of the back up programs (such as time machine). Could there be something automated happening? Any ideas on how to stop this? I just want my files to stay where I put them.
I'm becoming so confused about where stuff is and am concerned that I'm loosing some without realising it. I have noticed this most easily with itunes files and re-appearing files in the trash.
Six months ago there were issues with the hard drive and this was replaced under warranty and a system repair was completed, but the problems with the files have continued.
Thanks for any help,
~Coline.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

How can I change the source file so it is direct from external hard drive?

I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

Hi Bengt, Thanks for your input, much appreciated.
I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

I would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players...thank you

i would like to burn dvds..does anyone know a good safe easy to use converter/burning download to allow me to change mp4 /avi files to dvd so i can burn them on a disc that will play in all or most dvd players..also is it possible to upload store boughten dvds/bluerays to my macbook..if so does anyone know how one would do that ? im just getting used to this mac and i do love it but alas i am comp stupid hahaha...thank you

Toast Titanium by Roxio.

How can I change a .band file created in GarageBand to an .mp3 file?

How can I change a .band file created in GarageBand to an .mp3 file?

Dorsey Hudson wrote:
My GarageBand didn't work exactly as you suggested.
my apologies, i dropped the word "then."
for future readers:
"use the Share menu, then tick the Compress checkBox..."

How can I CHANGE A pdf file to word or excell

how do I change a pdf file to word or excell

Hi Alfonzo,
Here is a great 'getting started' guide that may help!
Let me know!!
Kindest regards, Stacy

How can i change a pdf file type to another file type

how can i change a pdf file type to another file type

You can copy the contents and paste it into a Word file. Just don't expect everything to transfer or to retain all of the formatting.

How do I close multiple files in Preview on OSX10.8 without having to click on "Revert Changes" for every file?

I opened, say, 100 PNG files that were saved in a landscape format. So I selected all files, typed Cmd+L (to rotate left), and then viewed them for a while. After I was finished, I tried to close all of them at once, but found I had to click on "Revert Changes" for every file?
In Snow Leopard, an option would come up allowing you to discard changes for ALL open files. Here, I cannot seem to find that option (if it even exists). Does anyone have an idea?

From the menu bar, select
 ▹ System Preferences... ▹ General ▹ Ask to keep changes when closing documents: Off

Nsurlstoraged - DiskCookieStorage continuously changing policy of File binary

Similar Messages

Maybe you are looking for