NT 4.0 will not fully recognize AT-232/2 Serial Card

Test system at a remote site previously worked until someone futzed with something and made it inoperable. WinNT was reloaded, along with SP6a and lots of patches.
'PnPISA' has been installed.
MIO-64 and DIO-96 are recognized.
NI Serial driver v1.5 has been installed.
AT-232/2 appears as 'New Hardware Found' with a valid address and IRQ - no conflicts.
---- 'NI Ports' reports that 'No NI Card can be found' and LabVIEW doesn't see it.

"hercules0" wrote in message
news:[email protected]..
> Test system at a remote site previously worked until someone futzed
> with something and made it inoperable. WinNT was reloaded, along with
> SP6a and lots of patches.
>
Hi,
Just something you should make sure.
Most PC's have onboard serial ports, that can be enabled or disabled in the
BIOS.
Maybe they were disabled in favor of your AT-232/2 card, and have recently
been enabled again. If the card shares addresses and IRQ's with the onboard
ports,
it will probably not work.
HTH, regards, Matt

Similar Messages

  • HP Photosmart Premium All-In-One driver software will not fully install

    After downloading and installing the full version of the printer driver (both from on-line site AND from purchased driver CD), the software appears to download fine, but will not fully install.  I have run Print and Scan Doctor and tried on-line support, uninstalling, reinstalling the drivers and have tried on-line HP support.  My new computer (HP Envy 715 xt) is less than 3 weeks old.  I am running Windows 7 Professional 64 bit.  The printer/scanner/copier/fax worked fine on my old computer which ran Windows XP.  I have tried everything - HP on-line support will not speak to me without charging me, even though my computer is brand new - they insist the problem is with the printer, which is out of warranty. 

    Hello Deb!
    I would recommend performing an L3 uninstall, and reinstalling. 
    I am listing the L3 uninstall steps below:
    -Launch your temp folder  
    -Go to the 7z folder
    -Go to the util\CCC folder
    -Launch the uninstall_L3.bat file
    Please let me know the results!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop

    My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop

    You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
    http://support.apple.com/kb/HT1455
    Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard.  I did a hard shut down, removed the drive and it went through a normal start up. 

  • Here is the message my Iphone 4 is stating "Error no successful firmware download after 60000 ms!! Giving up..."Itunes will not even recognize it, any ideas?

    Here is the message my IPhone 4 is stating, "Error no successful firmware download after 60000 ms!! Giving up..."ITunes will not even recognize it, any ideas?

    No, it has something to do with the firmware on the phone itself. The phone won't do anything. I have used redsn0w to try and put the firmware back on, no luck though. The farthest I am able to go is DFU mode. The message on the screen says, "Error no successful firmware download after 60000 ms!! Giving up..."

  • My iMovie keeps crashing and will not fully load. What do you think is the problem?

    What would be the reason why my iMovie keeps crashing and will not fully load?

    I don't know what version of iMovie you are using, nor the Mac OS X version (that's always helpful when posting questions).
    However, usually when iMovie has the type of problem you mention, it's advisable to firstly trash the preference file. Here's how to go about it for iMovie '11 on Mountain Lion (similar methods apply for other versions):
    Go to your Home folder <your user name>/Library/Preferences (NOT the Library folder at the top level in Macintosh HD). Similar to Lion, on Mountain Lion (10.8.3), the Home Library folder will be hidden (unlike pre-Lion OS X versions). To access it, click and hold down Go in the Finder menu bar, then press and hold down the Option key on the keyboard - the Library folder will appear in the drop down list. Slide the pointer down to Library and, as you release the pointer, the folder will open in Finder. Now you can navigate to the Preferences folder.
    In your user Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings (this happens in the background as iMovie is loading).
    If iMovie now opens and appears to be working properly, you can change the default settings in the menu item "IMovie > Preferences", as desired. Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm any existing Events or Projects.
    Note that these instructions are for iMovie '11 (currently version 9.0.9). For users on earlier versions, the preference file has a different but similar name. For example, for iMovie '09 (that's version 8.0.6) the file is named "com.apple.iMovie8.plist". Earlier versions may or may not have a number in the name, for example, "com.apple.iMovie.plist"
    If this doesn't fix the problem with iMovie crashing, please come back as I have another possible solution to offer.
    John

  • Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why?

    Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why?

    Hi Michael,
    “AdbeRdr11003_en_US.exe” is the download installed on our CEO’s new Windows 8 laptop.  It is a Dell XPS Re: Windows 8 Adobe Reader will not fully open a pdf compiled with several pdf's into one - why? Dell XPS 13" .  It has a full install Windows 8 Professional for its’ Operating System.
    I’ll attempt to attach the file in question.  The file opens fine on our Windows 7, and XP computers (with  the proper Adobe Reader on each).
    Our CEO says there is a message that comes up saying he needs Adobe Flash.  I’m attempting to find out whether or not he is trying to open it the ‘Metro’ view, or the ‘Desktop’ view – no answer yet.
    If your system strips the attachment, let me know, and I’ll upload the file to an ftp site {if necessary}.
    Wayne Nault
    [personal info removed by moderator]

  • I am trying to install flsh player update,   but it will not fully install say close safari, how do I fully close safari ?i

    I am trying to install a flash player update,        it will not fully load, saying close safari and try again,
    how do I close safari completely,     looks like something may be running in the background, but cant seem to find it,    any help please.

    Control + Click or Right Click on the Safari icon on the dock, and then click on Quit.

  • Web sites will not fully load. MSNBC, Fox and CNN load a partial page or load a text only version. this issue just started about a week ago.

    Some news web sites will not fully load. MSNBC will only show the head line and advertisers. CNN and Fox show a text only version with very limited pictures and the same for . Durdge report loads fully as will the Chicago Trib. seems like only certain news sites are subject to this partial display. have not seen this on commercial sites.

    Try deleting cookies and cache:
    1. Tools| Clear recent history
    2. Time range to clear: Everything
    3. If it isn't already selected, select '''Cookies''' and '''Cache'''
    4. '''Clear now'''
    Test for the problem
    Also see: [[Websites look wrong]] and [[Troubleshooting Extensions and themes]]

  • HT1436 My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    Great clue Lukas...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Battery will not fully charge.

    My battery will not fully charge anymore. Also, it seems that my phone has a hard time charging because sometimes the bolt will not show even when it is plugged in so it seems like something is loose. I am going to go to Verizon today to have them look into it. Does anyone have any ideas?

    Hey SophieLouiseBacon,
    Have you been able to try a different cable, it a different cable does the same thing then it is probably and issue with the port on the device.
    Let us know how you make out at the store.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Bing web page will not fully load

    Hello,
    I have a windows 8.1 64 pro workstation on the network that will not fully load bing.com or any search link from the MSN home page.   As far as I can tell every other web page loads correctly just not anything with bing.   I tested
    in Chrome - same issue.
    The bing page only loads the choices at the top left of the page.
    The search box only has an orange square - no magnifying glass.
    There is no bing background picture.
    There is no scrolling picture bar at the bottom of bing.    If I copy a working result Bing search url from another PC - it still only shows a fraction a bing search page - none of the results. 
    Google search works fine.
    Chrome shows only the partial bing search page - same as IE.
    I've have checked the ip - no problems with dns or gateway.
    I've tried using 8.8.8.8 for the dns server - still won't load the page in ie or chrome.
    I've tried loading a new windows profile - still won't load the page in ie or chrome.
    I've checked the hosts file - no entries.
    I've run multiple types of virus checks including malwarebytes & Symantec.
    I've applied all windows updates.
    I've reset IE to defaults - obviously that won't help since chrome can't load it either.
     There are no domain policies applied.
    There are now ie addins - again - wouldn't impact chrome.
    There are no unusual applications installed.
    It is not using IE 64 bit - again wouldn't impact chrome.

    Hi,
    According to your description, since both IE and Chrome has same problem, it's not browser problem.
    Have you tried to disable firewall and Symantec temporarilly for test?
    If problem persists, firstly start system with Clean boot. Then using Process Monitor to capture the trace of accessing bing.com.
    Clean boot: http://support.microsoft.com/kb/929135
    You can access to the link below to download Process Monitor:
    https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    How to capture a Process Monitor trace:
    http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
    Learning Example:
    Using Process Monitor to Troubleshoot and Find Registry Hacks:
    http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Why wsusscn2.cab will not fully download, today?

    The wsusscn2.cab file will not fully download, today 7/10/13.  Can someone please take a look? 

    I've also been unable to download wsusscn2.cab since 7/23/13. The download gets stuck at 82% in IE and 99% with Firefox & DownThemAll. I've tried to download the file on multiple computers with the same result.

  • 1020 will not fully charge

    New 1020, first Nokia & Windows phone. Noticed it will not fully charge.
    A few days ago I noticed it was not fully chargered after being on the supplied charger over night, it would top out at 73%.  I plugged it into an older wall charger and got it to 100%.
    Today I noticed it was not fully charged and pluged it into a different charger that came with my wifes 1020 while I was driving (our car has a built in inverter).  Finally it said it was fully charged (looking at the Settings Screen) so I unpluged it... 10 minutes later it went right back to 73%. No calls were made and it was not used. 15 minutes later it was at 72%. I took screen shots of the settings screen.
    Any ideas?
    Thanks

    Ditto, I dont even have a 25% charge afer a full night. I went to the att carrier I bought it from an dhe saif to make sure you "arrow" out everytime you use the phone but even doing that hasn't helped.  The warranty dept is sending me anew phone. I've only had it 15 days

  • TS1702 Hi, I downloaded some Apps and they all appear on my iphone screen saying waiting but will not fully download.  On my account they are showing as downloaded so won't let me download them again.  Any suggestions?

    Hi, I downloaded some Apps and they all appear on my iphone screen saying waiting but will not fully download.  On my account they are showing as downloaded so won't let me download them again.  Any suggestions?

    Hello Funkylildiva,
    Thank you for contacting Apple Support Communities.
    The following article addresses downloading past purchases.
    Download past purchases
    http://support.apple.com/kb/HT2519
    If, after going through this article, you are still having problems, there are links to report a problem or contact iTunes Store suppport at the bottom.
    Regards,
    Jeff D.

  • After install when starting photoshop will not load so I can enter serial number

    after installing photoshop cs3 on windows 7 when I start photoshop it will not load so I can enter serial number. why?

    iOS devices cannnot be tracked or located with just the serial number. Unless you shared your Apple ID and password with anyone, then your account cannot be accessed at the iTunes Store.
    Reporting a lost or stolen Apple product
    To be on the safe side, change your Apple ID password ASAP >   Support - Apple ID
    Read here >  Apple ID: Tips for protecting the security of your account

Maybe you are looking for