NT Authority\Authenticated Users cant able to get back the users

While deleting the group user i accidentally deleted the
NT Authority\Authenticated Users now i cant able to call "NT Authority\Authenticated Users" the
users in the site .how to get back to the users to the site. help me to add the NT users back thanks.
 

Hi Sundhar,
According to your description, my understanding is that you could not find
NT Authority\Authenticated Users after someone removed it from People&Group(Site Actions) in SharePoint 2010.
For this issue, you just need to manually type in “Authenticated Users” then click the user check icon instead of searching the address book for it. Once the check completes, you should see an image similar to below:
More information, please refer to the link:
http://appdevonsharepoint.com/what-happened-to-nt-authorityauthenticated-users-in-sp2010-sp2013/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

  • My iphone recently fell and now my screen is damaged,i cant see a thing but it works, if i backup my data to iclouds would i be able to get back all my messages in like whatsapp when i get a new iphone?

    i have an iphone 4s,  it recently fell now the screen is damaged i cant see a thing its not cracked, if i back up to icloud would i be able to get back my messages from whatsapps

    did you turned on keychain and documents turned on if that is on you can get back your chat history....

  • I cant get past the users screen.

    I have a hp pavilion slimline s5212y. When Windows starts I get to the users screen and then my mouse and keyboard stop working. No lights or anything.even in safe mode.. they work before I get to the users screen. I have tried everything I can think of.please help...

    Start up in safe mode and then access system restore. Choose a restore point dated before the issue began.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • User not able to connect to the WIreless

    We are facing the issue with a client he is getting the Ip but we are not able to ping even it fails to get the lenk test from the WLC.AP is registered to the Centralised WLC and other users are able to get the access with out any problem .Below are the loggs i got for the user .
    debug client 1c:65:9d:a4:ea:b6
    (Cisco Controller) >*DHCP Socket Task: Dec 05 09:47:07.361: 8c:70:5a:c6:86:28 DHCP received op BOOTREPLY (2) (len 330,vlan 0, port 13, encap 0xec03)
    *emWeb: Dec 06 08:20:19.255: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:20:19.256: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:20:19.259: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    (Cisco Controller) >debug client 1c:65:9d:a4:ea:b6
    (Cisco Controller) >*apfMsConnTask_6: Dec 06 08:21:19.495: 1c:65:9d:a4:ea:b6 Association received from mobile on BSSID 20:37:06:7c:53:a0
    *apfMsConnTask_6: Dec 06 08:21:19.498: 1c:65:9d:a4:ea:b6 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Max Client Trap Threshold: 0  cur: 18
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Rf profile 600 Clients are allowed to AP wlan
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Re-applying interface policy for client
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 In processSsidIE:4619 setting Central switched to FALSE
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying site-specific Local Bridging override for station 1c:65:9d:a4:ea:b6 - vapId 1, site 'default-group', interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 Applying Local Bridging Interface Policy for station 1c:65:9d:a4:ea:b6 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_6: Dec 06 08:21:19.499: 1c:65:9d:a4:ea:b6 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Processing RSN IE type 48, length 20 for mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Received RSN IE with 0 PMKIDs from mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Removing BSSID 20:37:06:7c:53:a0 from PMKID cache of station 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Resetting MSCB PMK Cache Entry 0 for station 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Setting active key cache index 0 ---> 8
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 apfMsRunStateDec
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 apfMs1xStateDec
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Change state to START (0) last state RUN (20)
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 START (0) Initializing policy
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_6: Dec 06 08:21:19.500: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfPemAddUser2:session timeout forstation 1c:65:9d:a4:ea:b6 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 Sending Assoc Response to station on BSSID 20:37:06:7c:53:a0 (status 0) ApVapId 1 Slot 0
    *apfMsConnTask_6: Dec 06 08:21:19.501: 1c:65:9d:a4:ea:b6 apfProcessAssocReq (apf_80211.c:7957) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *apfMsConnTask_6: Dec 06 08:21:19.510: 1c:65:9d:a4:ea:b6 Updating AID for REAP AP Client 20:37:06:7c:53:a0 - AID ===> 7
    *dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 Disable re-auth, use PMK lifetime.
    *dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
    *dot1xMsgTask: Dec 06 08:21:19.511: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 1)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 Received EAPOL START from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.010: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 2)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Received Identity Response (count=2) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 EAP State update from Connecting to Authenticating for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticating state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.018: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=160) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 WARNING: updated EAP-Identifier 2 ===> 160 for STA 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.023: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 160)
    *apfMsConnTask_6: Dec 06 08:21:20.031: 1c:65:9d:a4:ea:b6 Association received from mobile on BSSID 20:37:06:7c:53:a0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Global 200 Clients are allowed to AP radio
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Max Client Trap Threshold: 0  cur: 19
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Rf profile 600 Clients are allowed to AP wlan
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying Interface policy on Mobile, role Local. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Re-applying interface policy for client
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2164)
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2185)
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 In processSsidIE:4619 setting Central switched to FALSE
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying site-specific Local Bridging override for station 1c:65:9d:a4:ea:b6 - vapId 1, site 'default-group', interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 Applying Local Bridging Interface Policy for station 1c:65:9d:a4:ea:b6 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 STA - rates (8): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:20.032: 1c:65:9d:a4:ea:b6 STA - rates (12): 130 132 139 150 36 48 72 108 12 18 24 96 0 0 0 0
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Processing RSN IE type 48, length 20 for mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Received RSN IE with 0 PMKIDs from mobile 1c:65:9d:a4:ea:b6
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 8
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Initializing policy
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 apfPemAddUser2 (apf_policy.c:333) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 apfPemAddUser2:session timeout forstation 1c:65:9d:a4:ea:b6 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_6: Dec 06 08:21:20.033: 1c:65:9d:a4:ea:b6 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Sending Assoc Response to station on BSSID 20:37:06:7c:53:a0 (status 0) ApVapId 1 Slot 0
    *apfMsConnTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 apfProcessAssocReq (apf_80211.c:7957) Changing state for mobile 1c:65:9d:a4:ea:b6 on AP 20:37:06:7c:53:a0 from Associated to Associated
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 160, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.034: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 Disable re-auth, use PMK lifetime.
    *dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Connecting state
    *dot1xMsgTask: Dec 06 08:21:20.038: 1c:65:9d:a4:ea:b6 Sending EAP-Request/Identity to mobile 1c:65:9d:a4:ea:b6 (EAP Id 1)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Received Identity Response (count=1) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 EAP State update from Connecting to Authenticating for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticating state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.050: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=161) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 WARNING: updated EAP-Identifier 1 ===> 161 for STA 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.055: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 161)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.063: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.063: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 161, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.064: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=162) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.068: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 162)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 162, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.083: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=163) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.087: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 163)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 163, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.111: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.166: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.167: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=164) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.167: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 164)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 164, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.173: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=165) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.179: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 165)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 165, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.184: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=166) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.189: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 166)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 166, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.200: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=167) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.204: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 167)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 167, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.216: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=168) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.718: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 168)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 168, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.725: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Processing Access-Challenge for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Entering Backend Auth Req state (id=169) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.731: 1c:65:9d:a4:ea:b6 Sending EAP Request from AAA to mobile 1c:65:9d:a4:ea:b6 (EAP Id 169)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Received EAPOL EAPPKT from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Received EAP Response from mobile 1c:65:9d:a4:ea:b6 (EAP Id 169, EAP Type 25)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.738: 1c:65:9d:a4:ea:b6 Entering Backend Auth Response state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Processing Access-Accept for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Resetting web IPv4 acl from 255 to 255
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.746: 1c:65:9d:a4:ea:b6 Resetting web IPv4 Flex acl from 65535 to 65535
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting re-auth timeout to 0 seconds, got from WLAN config.
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Station 1c:65:9d:a4:ea:b6 setting dot1x reauth timeout = 0
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Stopping reauth timeout for 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Creating a PKC PMKID Cache entry for station 1c:65:9d:a4:ea:b6 (RSN 2)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Resetting MSCB PMK Cache Entry 0 for station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 8
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Setting active key cache index 8 ---> 0
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Adding BSSID 20:37:06:7c:53:a0 to PMKID cache at index 0 for station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: New PMKID: (16)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747:      [0000] 8a 3e dc 82 7b 6b ce 00 72 ac 5d be 2a 12 ab a6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 Disabling re-auth since PMK lifetime can take care of same.
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.747: 1c:65:9d:a4:ea:b6 unsetting PmkIdValidatedByAp
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 PMK sent to mobility group
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Sending EAP-Success to mobile 1c:65:9d:a4:ea:b6 (EAP Id 169)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Freeing AAACB from Dot1xCB as AAA auth is done for  mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Found an cache entry for BSSID 20:37:06:7c:53:a0 in PMKID cache at index 0 of station 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: Including PMKID in M1  (16)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748:      [0000] 8a 3e dc 82 7b 6b ce 00 72 ac 5d be 2a 12 ab a6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Starting key exchange to mobile 1c:65:9d:a4:ea:b6, data packets will be dropped
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.748: 1c:65:9d:a4:ea:b6 Sending EAPOL-Key Message to mobile 1c:65:9d:a4:ea:b6
                                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 Entering Backend Auth Success state (id=169) for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 Received Auth Success while in Authenticating state for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.749: 1c:65:9d:a4:ea:b6 dot1x - moving mobile 1c:65:9d:a4:ea:b6 into Authenticated state
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Received EAPOL-Key from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Received EAPOL-key in PTK_START state (message 2) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 PMK: Sending cache add
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.766: 1c:65:9d:a4:ea:b6 Stopping retransmission timer for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.767: 1c:65:9d:a4:ea:b6 Sending EAPOL-Key Message to mobile 1c:65:9d:a4:ea:b6
                                                                                                                        state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Received EAPOL-Key from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.773: 1c:65:9d:a4:ea:b6 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 Stopping retransmission timer for mobile 1c:65:9d:a4:ea:b6
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 apfMs1xStateInc
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) DHCP required on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1for this client
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 Not Using WMM Compliance code qosCap 00
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 20:37:06:7c:53:a0 vapId 1 apVapId 1 flex-acl-name:
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 apfMsRunStateInc
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 L2AUTHCOMPLETE (4) Change state to RUN (20) last state L2AUTHCOMPLETE (4)
    *Dot1x_NW_MsgTask_6: Dec 06 08:21:20.774: 1c:65:9d:a4:ea:b6 10.15.73.240 RUN (20) Reached PLUMBFASTPATH: from line 6233
    *DHCP Socket Task: Dec 06 08:21:20.796: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.800: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.800: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *DHCP Socket Task: Dec 06 08:21:20.816: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.817: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:20.817: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *DHCP Socket Task: Dec 06 08:21:24.515: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.517: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.517: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP received op BOOTREPLY (2) (len 364,vlan 0, port 13, encap 0xec03)
    *DHCP Socket Task: Dec 06 08:21:24.520: 1c:65:9d:a4:ea:b6 DHCP dropping ACK from 10.14.90.71 (yiaddr: 10.15.73.240)
    *emWeb: Dec 06 08:21:52.267: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:21:52.270: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    (Cisco Controller) >undebug
    Incorrect usage.  Use the '?' or <TAB> key to list commands.
    (Cisco Controller) >*emWeb: Dec 06 08:21:52.272: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:23:25.462: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:23:25.463: 1c:65:9d:a4:ea:b6 Central Switch = FALSE
    *emWeb: Dec 06 08:23:25.464: 1c:65:9d:a4:ea:b6 Central Switch = FALSE

    Please upgrade the WLC

  • I am trying to create a signature with echosign. I cant seem to get to the right screen. Any ideas?

    I want to create my signature with Echosign, but I cant seem to get to the right screen. How can I either draw my signature or type it in? thanks.

    George, I respectfully disagree that it related to the document. All documents I receive have the same problem. Again, all I want is to have the options back under the “Place Signature” button to be able to type my signature or draw it. The only thing the button is currently letting me do is  in the screen print below.
    cid:[email protected]

  • Bummer Message:  Cannot Get Mail  The user name or passowrd for "

    I have had the iPad 2 for one week and was able to access two gmail accounts (mine and my wife's). . . until this morning when one of them (mine) starting giving me the message:  "Cannot Get Mail  The user name or password for "####" is incorrect."  The other gmail account is still accessible. So what is the solution--if any?

    If your having problems sending email - go into your email settings and see if you can enter a password for your outgoing mail server same password as your incoming mail server.

  • How can i get all the users from weblogic server?

    how can i get all the users from weblogic server?
    i have configurated a LDAP server using iPlanet and
    in weblogic server console i see those users from LDAP
    server. but how can i get all the users in my program
    from weblogic server instead of LDAP server?
    BTW,how to configure a RDBMSAuthenticator and what should i do
    in Oracle? which tables should i create? and how are their architectures?
    Thanks
    Daniel

    BTW, i use weblogic platform 8.1
    "Daniel" <[email protected]> дÈëÓʼþ
    news:[email protected]..
    how can i get all the users from weblogic server?
    i have configurated a LDAP server using iPlanet and
    in weblogic server console i see those users from LDAP
    server. but how can i get all the users in my program
    from weblogic server instead of LDAP server?
    BTW,how to configure a RDBMSAuthenticator and what should i do
    in Oracle? which tables should i create? and how are their architectures?
    Thanks
    Daniel

  • Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access.

    Firefox will not access the internet. I have used Firefox for years and the past week I have not been able to get on the internet??? What is the problem. My interent works as I get email and can iuse Internet Explorer to access

    Which version of Firefox are you using?
    See
    * https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can

  • I have installed iTunes twice and when I try to open it all I get is the user agreement.  Click on agree and then nothing.  Windows

    I try to open my itunes and all i get is the user agreement and then nothing happens once i click on agree.  Can anyone help

    Refer to following article to remove SC Info.lib file:
    http://support.apple.com/kb/TS2363
    Then repair your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

  • I am trying to download the new CS6 Design Suite - not able to get past the previous version.

    I am trying to downloat the new CS6 Design Suite and am not able to get past the previous version menu. Getting the message "This serial number is not for a qualifying product. Please try another." How do I get past this?

    When you say "Download" do you actually mean install?
    Which version are you upgrading from?
    Could you try the solutions in the following article: http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html.
    Let us know if it helps.

  • Not able to get all the results if i use "get-spdeletedsite" command

    Hi everyone,
    I am not able to get all the results when I use the below powershell command.
    get-spdeletedsite -limit all
    It is giving me only one site, but infact we have more than 100 deleted sites.
    If I use the normal command like below it is giving the below output
    get-spdeletedsite
    Can any one tell me, how can I get all the deleted sites ?
    Best Regards
    Anil Alladi

    Hi  Anil,
    For the Limit parameter of Get-SPDeletedSite cmdlet, when we specify its value to ALL, it  will return all site collections for the given scope.
    For your scenario, the script “Get-SPDeletedSite –Limit ALL” will return all deleted site collections in your SharePoint environment.
    If you want to get all deleted site, you can export the result to csv as below:
    Get-SPDeletedSite | export-csv out.csv -notypeinformation
    Reference:
    http://technet.microsoft.com/en-us/library/hh286316(v=office.15).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • While deleting an album, I hit select all, instead of deleting just that album the entire genre was deleted. I was able to get back all the purchased songs , but none of the cds that were in my collection. Any way to get those songs back?

    While deleting an album, I hit select all, instead of deleting just that album the entire genre was deleted. I was able to get back all the purchased songs , but none of the cds that were in my collection. Any way to get those songs back?

    Assume you were in itunes?  Also assuming windows?  Two paths I can think of.....
    1) Normally anything deleted from itunes goes to recycle bin.  If you did not pick remove from computer probably still in itunes music directory.  Just add back.  Note to speed things up you can use add directory.
    2) Use restore previous version of music directory.  To be safe I'd back up current directory, do a restore, then swap back original directory and use restored directory off line.
    I do not know of nice solution, I like to hack my way through.

  • After the last update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased

    After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased

    Your library should be safe.
    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • How i able to get back my pre-install software in ...

    Hi everyone,
       I accidently format my memory card, how i able to get back pre-install software in the memory card??? My phone is E66. Thanks.

    download preinstalled softwares from the following link
    http://europe.nokia.com/get-support-and-software/product-support/nokia-e66/software
    and from here for more softwares.
    http://europe.nokia.com/find-products/devices/nokia-e66/downloads 
    ¨Arm yourself because no one else here will save you¨

  • 10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

    10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.  I really just need mail file and desktop files recovered.

    If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
    As quickly as possible turn off the drive where deleted data.
    Use an external HDD with installed OSX for data recovery.
    Alex
    Apple Certified Support Professional

Maybe you are looking for

  • How do I delete just songs from the iPad?

    In an attempt to move my iTunes library, I have now gotten way out of whack with my music.  I deleted all songs from iTunes and re-imported (sacrificing my play counts, etc., but I didn't know what else to do), and that works, but it leaves my iPad i

  • COST CENTER CHANGES FOR OPEN PO REQUIRE BEST APPROACH HOW TO DO IT

    Dear All, we are changing the cost center for open PO's kindly tell us the best approach how to do it for all open PO's line items for open PO's are 4000. we will totally block the old PO's and change the PO's with NO GR and IR immediately, but what

  • Printing Problem at LOCAL  Printer

    Hello guru's, Through workflow after approval and release of Purchase order, it should print at a LOCAL printer. but it is not happening. Will anyone suggest me the reasons behind that. Full points for useful solution

  • How to handle error when importing taxonomy for product using XML?

    We are on MDM 5.5 and built a repository for SAP R/3 Material Master. It has basic material information and taxonomy information as well. We built an import map based on an XML file, which includes basic info as well as taxonomy (classification) info

  • OTL Data Archiving

    We are experiencing slowing performance in OTL due to the volumes of historic data we are holding and would like to archive some. I have read the OTL whitepaper and followed the instructions however when I run "Validate Data Set" then set completes w