NT CWS and Search server on same machine?

Should they be?
Thanks
M

You are allowed to install the Windows Content Service and the Search Server on the same machine. Note, however that the Search Server likes to have plenty of memory. The Search Server will try to keep as much of the index in memory for performance reasons. As your Knowledge Directory grows, the Search Server will want to have more memory.
-Paul

Similar Messages

Infrastructure and forms server into same machine

Dear friends,
I am faching strange problem
, I install 9ias(9.0.2.0.1) infrastucture and form server into same machine,
after sucessfull installation it is mention infrastucture will run the port 7777 and form will 7778,
but after just installation it work into these ports but when i restats the system then port of infrastucture change and it is 7779.
now if i run forms the it give internal error 500,
then I stop fist infrastucture http server then http server of form
and again first start infrastucture hhtp server then form http server
now agin infrastructure server port id 7779(insted of 7777)
but now my form work properly.
every day i do this job , but some time this method fails then i have to again install server and have to repeate above mention job .
pls help me
With regards
Siddharth Singh
[email protected]

Mid-tier listens on a lot of ports. On a std install (with both Infra and Mid-tier) Web-cache listens on port 7778 "in front of" httpd for OHS on 7779. So perhaps you forget to start web-cache? (run from BI home: webcachectl)
Perhaps the problem with Forms is related to X Toolkit?

Is it possible to install Oracle 9i and SQL server on same machine

1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,

Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek

I want to run IIS and Form Server on same machine

Dear follows
I have problems , porblems is that i want to run IIS and Form
Server at same machine but i m facing some problems so please
inform me right proceduers to run this services at same machnine
now i m using Windows NT .
My secone problems is that i want to send emai via oracle
reports , actuall condition is that i have oracle report and i
want to add button and behind this boutton i want to add trigger
to send this report as a emai to client as txt/html format.

There shouldn't be any problem running both forms server and IIS
on the same machine. Just make sure the ports that are used are
different. IIS's default port is 80, so either change this port
number or change it for the Forms server's web listener.
You can send reports to email if you use DESTYPE=MAIL.

How to instal FMS and Wowza Server on same machine.

I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
Thanx in advance.

I have on one server installed both red5,fms and wowza
first install red5 ( by default it uses port 1935 obviously )
then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937

Installing All (9iDB,9iDS and report server) in same machine

I want to use one machine only.
I have installed 9i database, and on same 9iDS.
and created a report server on same machine
i am facing a problem
all application runs very fine but on running report from
forms by using webs.show_document()
a new page comes and states
Opening page http://server1:8888/reports/rwservlet/getjobid..
and hangs there only.and it hang such that after closing the page
application also does not work.i have to restart OC4J
i have seen in trace file report finished successfully
and also in report\cache directory report file is alreasy made.
now when i install 9iDS in another machine and use the other machine as application server,report server be in
any machine it work fine.
all report are displayed. no problem comes in that case.
But i have to use only one machine .
pls state me solution
thanks a lot
regards
raj

I HAVE SEEN IN JINIT CONSOLE
trace level 5
on server where (9iDS and database both installed)
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477
Connecting http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd849878b75cf8649b1d477 with no proxy
Opening http://server1:8888/forms90/l90servlet;jsessionid=c995d4251dd84987
and so on..
on another machine
from where reports comes
this is trace file
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with no proxy
Connecting http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448 with cookie "getfileauthid=c0roXNhhSA=="
Opening http://pdc:8888/forms90/l90servlet;jsessionid=db17d7a493484cb8ac2ac70498be1448
now i see in first stage it is not connecting with
cookie

Starting Admin and Managed Server on Same Machine

Has anyone come across a method of running both their admin server and managed
servers as a Service and on the same machine. As you can see, when the OS comes
up both Services for the servers will be started. I can put in a dependency on
the managed server saying that the admin server needs to be started but that doesn't
guarantee that admin server will be ready for "prime time."
I have seen somewhere in a support message something about a "depend" and "delay"
flag for the beasvc.exe program but the one I'm using doesn't seem to support
this.
Here is my setup:
Windows 2000 Pro
Weblogic Server 6.1 SP1
Any assistance is appreciated,
Rich

John Hufnagle wrote:
          > Is it possible to run cluster admin server and one of the managed servers on the
          > same machine...(just preserving machine resources for in-house testing).
          As Kumar said, it is possible to run the admin server and one (or more) managed servers
          on the same machine.
          >
          >
          > If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
          > or will I also run into problems with the multicast address?
          Since the admin server is not part of the cluster, it is perfectly fine to use a
          different set of ports for the managed servers as long as all servers in the same
          cluster use the same ports...
          Hope this helps,
          Robert

Calendar Server and Email Server on Same Machine - Email Issue

Hi.
I've installed email and calendar on the same host. The email domain for test purposes is the name of the machine. I noticed in the configuration guide, it says that if you put the calendar server and email server on the same machine you need to configure sendmail.cf and modify incoming rules in order to get email reminders from Calendar to Email. I have done this but am still not able to. I get the emails kicked back to root and they say:
553 5.3.5 System Config Errors
553 5.3.5 <machine name> config error: mail loops back to me (MX problem?)
Has someone seen this before?
Thank You,
Matt

Hi Russ,
We have the same problem as Matt.
We have properly set up OCS Email it works well both inside and outside our network.
The only thing that appears not to be working is the email notification capabilities of OCS Calendar.
We have changed sendmail.cf as stated in the documentantion.
we are using -
RedHat Advanced Server 2.1,
sendmail 8.11.6
bind 9.1.3
I would be very gratefull of any information on this, as we're out of ideas...

Mail and web server on same machine

hi to all,
i have jes 4 suite installed on the same machin: uwc runs on port 81 and 443 (secure) and mail can be accessed on:
https://mail.dom.com
I want to create a new web instance to host the web content. It will be access at:
http://www.dom.com
What needs to be done so that users do not access
https://www.dom.com as web mail
and http://mail.dom.com as web server?
thanks!
Linda.

What is on port 80 is the webserver that should host the website.
What is on port 81 is the webserver instance hosting the webmail. I installed a certificate and created a new LS so that users access the webmail through https. port 81 is firewalled.
There is no command called 'host' on Solaris. Actually the DNS admin will register www.dom.com and mail.dom.com to have the same IP since mail and web are installed on the same machine.
The server processes that exist should be the mail processes and the 2 web instances processes. the first instance should listen to port 443 and 81. The second instance should listen to port 80.
the urls that a user might type:
https://mail.dom.com
http://www.dom.com
http://mail.dom.com
the last url is what I want to change. Normally this should display the website. I don't want this result. I want to display the webmail page i.e. https://mail.dom.com. If this is not feasible, I want to display a page showing the 2 other urls.
thanks,

Admin and Managed Server on same machine

          Is it possible to run cluster admin server and one of the managed servers on the
          same machine...(just preserving machine resources for in-house testing).
          If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
          or will I also run into problems with the multicast address?


John Hufnagle wrote:
          > Is it possible to run cluster admin server and one of the managed servers on the
          > same machine...(just preserving machine resources for in-house testing).
          As Kumar said, it is possible to run the admin server and one (or more) managed servers
          on the same machine.
          >
          >
          > If the admin listens on 7001/7002 can I just set up the managed server to 7003/7004
          > or will I also run into problems with the multicast address?
          Since the admin server is not part of the cluster, it is perfectly fine to use a
          different set of ports for the managed servers as long as all servers in the same
          cluster use the same ports...
          Hope this helps,
          Robert

Forms and report server on same machine

dear fellows if i install form 6i server and after it install
report server they override each others setting and only one
runs (later ) any help
thankx

Look at the listener/cfg directory at the webdbsvr.cfg file and
back up the directory mappings there.
some of them are getting overriden when you install reports
after forms. Just add them back to the file after you finish the
installation.

Install database , application and search index on Single machine ?

Under SAP PROD PAK SERVER 4.3 -> Windows Server on IA32 32bit (SAP Education Products" SAP PRODUCTIVITY PAK BY ANCILE" SAP PRODUCTIVITY PAK 4.3) I am only getting the below files-
RWDuPerfServer43P_1-10009622.ZIP
RWDuPerfServer43P_2-10009622.ZIP
Is this the right server software ?
- Can we install database , application and search index on same machine ?
- OS is windows (2003, 2008, ???), Is RWD only supported on 32 bit windows with IA processor or any processor and also on 64 bit ?
- Where can I find the installation document or all the prerequistes ?
- Which database is preferable SQL, oracle or DB2 , currently we have SAP system on DB2
- Do we need to integrate the RWD with all SAP system landscapes ?
- Also suggest the hardware requirement (RAMprocessorhard disk space) if 1 server installation is possible for all the req (Search Server + Database Server + Web Application Server + Administrator Workbench)
Thanks
Saurabh

Hi Saurabh,
These are the latest patches - 4.31 and 4.32.
To install 4.30 you will need to go to the "Installation and Upgrade" section of Service market place and download and install this first.
Installations and Upgrades -
   P
       "SAP PRODUCTIVITY PAK BY ANCILE"
            SAP PRODUCTIVITY PAK 4.3
The patches can be downloaded and installed then.
The documentation will be within the installation files.
Hope this helps,
Kind Regards,
Matthew

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

Oc4j starting with Oracle Database & oc4j App Server on same machine

Hi ALL, can anybody help me(pls read this)
This is Sagar, i have created a GIS Application(java) using Oracle 10g.
Senario I:
oc4j server and oracle 10g Database Server on different machines:
When i start oc4j server with NO. OF Mappers = 64 or 30 in DNS using
1. oc4j -start (normally)
from the path c:/oc4j/bin by setting ORACLE_HOME path normally
application is working fine but when users are increased say 4 to 5 oc4j server gives error:
java.lang.OutOfMemoryError: Java Heap Space
I searched for this error i found a solution for starting oc4j as follows:
2.Java -Xmx1024m -Xms1024m -jar oc4j.jar
from the path c:/oc4j/j2ee/home --- oc4j.jar
Then map & application works fine and fast since heap space is increased to 1GB (speed is noticable)
but if...(in other senario)
Senario II:
oc4j server and oracle 10g Database Server on same machine:
if step 2: is used form above senario, oc4j Server does not gets started only it gets initialized...(server does not gets started)
but Step 1: is used application works fine but again heap space error as mentioned above is seen.
Again if changes are made in oc4j.cmd file in c:/oc4j/bin ....by giving the heap space command oc4j works fine but the application(performance) is very very slow but heap space error is not seen.
Please can any body suggest the solution.. application should work fast and also the heap space should be increased but taking the senario - oc4j App Server & Oracle 10g Database Server on Same machine..

Hello,
How much RAM do you have on the machine? What is the size of the SGA for the database you are using?
if step 2: is used form above senario, oc4j Server does not gets started only it gets >initialized...(server does not gets started)What do you mean by this? Provide the output from the server when you start your server.

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

NT CWS and Search server on same machine?

Similar Messages

Maybe you are looking for