NT Desktop Perference display icon is not working
Hello:
I am using ConsoleOne version 1.3.5 to manage our Novell servers, there
is an User Package object, in Policies -> WinNT-2000 -> NT Desktop
Preference -> Properties -> Desktop Preferences -> Settings, there is
a "Display" icon to allow us to setup Wallpaper under the roaming profile
for all workstations, but when I click on it, it is not working, please
advise.
Thanks.
Kevin
If you are running a local copy of ConSlowOne try running the .exe from
the server - I have found that some of the ZEN features don't work running
from a copy of ConSlowOne on the workstation.
> > [email protected] wrote:
> > > Hello:
> > >
> > > I am using ConsoleOne version 1.3.5 to manage our Novell servers,
> there
> > > is an User Package object, in Policies -> WinNT-2000 -> NT Desktop
> > > Preference -> Properties -> Desktop Preferences -> Settings, there
is
> > > a "Display" icon to allow us to setup Wallpaper under the roaming
> profile
> > > for all workstations, but when I click on it, it is not working,
> please
> > > advise.
> > >
> > > Thanks.
> > >
> > > Kevin
> > >
> > >
> >
> > Does the wallpaper selected already exist on the workstation? I can't
> > recall if this policy will bring down the wallpaper or not.
> >
> > Any chance there is a GPO also in place on the user/workstation that
is
> > over-riding this setting. ( There could be conflicts here.)
> >
> > Try using the GPO instead as this is a better supported solution.
> > The NT Desktop Preferences is a hold-over to Windows NT days and pre
> > Group Policies.
> >
> >
> > --
> > Craig Wilson
> > Novell Product Support Forum Sysop
> > Master CNE, MCSE 2003, CCN
>
Similar Messages
-
Book Mark Icon is not working?
Hi,
There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
Why BOOK MARK ICON is not working?
Please correct me if I am wrong.
Book mark is URL we are getting after the clcking on the EIther on the ICON or context menu option.This URL can be used any where where ever is required.Right?
But In my case the URL Content is chainging based on the Adhoc query designer.Only characterstics are again and again changing but key figures are original only.
please help me?U mean to say the Book Mark URL created on one system will not work on another system right?
=>the Book Mark URL created on one system may not work on another system right? in fact in 80% cases it works...
But what once I execute the query in portal I will be getting an URL.This also can be used as Book mark right?
=>yes, it can be used,,,
but the URL generated with the function of the BOOK MARK is only called as Book mark why is it?
=> let me explain this with an example ... there is a BW server physically located in France and can be accessible across all the location wherever project is running. Somebody try to access the Query URL from Gurgaon (one of the project location)which was executed in France may not be run in Gurgaon (Page cant be displayed) because port # in the URL may be blocked in Gurgaon due to security reason,,, this case we have to contact the admin ,they will enable the port..same case i have faced -
Application "FINDER"not responding,Desktop files disappeared & " also "Trash" not working svn after relaunching several times.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process (Finder) in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
My camera icon is not working on my sms so i cant send picture with sms? what to do?
My camera icon is not working on my sms part?
so i cant send picture with sms? what to do?Double tap Home button, delete Camera app in multitask-bar.
Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
By the way, picture go through as MMS not SMS, do you have a SMS/MMS plan with your carrier?
Have you spoken with them? -
Book mark Icon is not working in Adhco queries?
Hi,
There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
Why BOOK MARK ICON is not working?Hi,
I observed the same, Book Mark Button availabe on web report is not working but Book mark URL can be saved with the context menu -> bookmark.
need to check the Web template for Book Mark.
Bookmark URL can be saved and that URL is used to go fastly to the requied navigation fastly, that is the use of Bookmark
hope this helps
Regards
Daya Sagar -
After I updated my new Ipad with IOS 6, now Map& Dictation icon are not working. please help me
Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?
-
My mail icon is not working after update ios 6.1.1 ????
dear sir please give me soluction.
my mail icon is not working after update of ios 6.1.1You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
You can change the country and other things by:
iOS: Changing the signed-in iTunes Store Apple ID account -
My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
Why weren't we told that display mirroring would not work with a Mac older than 12 months?
Why weren't we told that display mirroring would not work with a Mac older than 12 months?
You were, just not directly. If you go to apple's mountain lion webpage, you'll see this note at the bottom:
1. AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
http://www.apple.com/osx/whats-new/features.html -
Mute icon is not working after the lollipop update
Hi , I just found out that the mute icon is not working in my yoga tab . It used to work before the lolipop update This bug is troubling me alot while attending the official conference calls. Can anyone help me out with this? Regards, Deepika
Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Hi, I have uninstalled and re-installed Java. When I look at Add-ons, it shows Java Platform SE7 U17 10.17.2.2 and Java deployment Toolkit 7.0.17… 10.17.2.2 enabled. But it is not working – and I do not see the Firefox plugin to allow occasional use of Java.
One useful thread which discusses several difficulties in detail is
https://support.mozilla.org/en-US/questions/944956?esab=a&as=aaq
I tried to follow scrumpyjoe’s advice in this thread:
“This fixed it for me (32 bit windows) after installing Version 7 Update 10, but not seeing the plugin:
1) start regedit
2) navigate to HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins
3) right click, add New Key, name: @java.com/JavaPlugin,version=10.xx.xx
4) click on it, then right click and add new string value, name: path
5) right click, Modify, change value data to: C:\Program Files\Java\jre7\bin\plugin2\npjp2.dll [check if this is the right dll for your setup]
6) exit regedit
7) start FF”
- but (unless I have made a mistake) it has not resolved my problem.
What can I try next, please ?
Background:
Asus NX90jq
Intel core I7
700GB free disk space
16384Mbytes memory
O/S: Windows 7 Ultimate, 64-bit
UPDATE 2apr13
I have now unistalled and re-installed Firefox 20.0. restored preferences etc. using MozBackup, and Java Platform and Java Toolkit10.17.2.2. both show as working Add-ons - BUT STILL NO JAVA AND STILL NO RED ICON IN TOOLBAR. What is going on, please ?I don't understand any of these replies. How do I get Java to run for Pogo.com? I had no problems a week ago. I do not have the red icon. I am not a programer so keep it simple. I am a 59 year old speech therapist.
[email protected] HELLLLLLP -
'show icon preview' not working, Icon preview no longer visible
I have lots of folders full of jpg files. The preview icon do longer appears and all i get is the genetic icon. This happened randomly yesterday and I don't know how to fix it. I have the 'Show Icon Preview' enabled yet I only get the generic icon. Any ideas why? (OS X 10.5.8). I have tried a restart, permissions fix, and reindexed my hard drive with spotlight. No luck. Please help!
Simply: I don't know how to get the preview back even after selecting the "show icon preview" box on the options. HELP!There probably are some hidden probable causes for this behavior;
while not knowing if you perform any general maintenance in a
preventative way for your OS X system, some of the suggestions
I could provide here may mean little or nothing to some users, or
to others, who have done them for years as a matter of course, to
suggest those could be the same as an insult; or a laughing matter.
You could try rather basic things, a few steps above 'repair disk
permissions' in Disk Utility. That's been around since OS 10.1.5.
And it has a place among other steps one can do to help out.
Sometimes, you can start up into SafeBoot mode; then choose to
run Disk Utility, and repair disk permissions. When done, quit D.U.
and restart the computer normally. - Other repairs to the system may
be performed by booting up from the OS X installer and run Disk
Utility from the menu drop-down options in the main Installer window.
You can repair disk, verify disk (SMART verify), repair disk permissions
and verify disk permissions. Plus other aspects of Disk utility that are
tools to set up partitions and other things beyond a basic simple fix.
SafeBoot mode, basic:
+Hold the Shift key down on start-up, keep holding it until you get a login+
+screen, enter admin password, then when desktop appears, you can+
+use GO in menu bar to find Utilities folder, and run Disk Utility's repair+
+disk permissions. When done, quit the Utility and restart.+
There probably may be some .plist file controlling the view of image icons
and since I haven't followed that issue (experienced it in the past, forgot
what I did to fix it) I am not sure what preference file to suggest trashing.
But you can be very selective, when knowledgeable, and do that. Then,
later on, when you restart the computer the default setting would return.
You could set that to whatever (if not the default) & that may fix the matter.
{One preference file location that probably would contain your user account's
.plists would be in the Macintosh HD> User folder> Library> Preferences>
...Now, the correct one among these becomes important. There is a desktop
plist, a finder plist, and others. Since each user in a Mac with their own setup
account can change these, yours should be in your booted user account.
However, some time has passed since this kind of issue occurred and I didn't
need to delete a .plist to resolve it. Yet that may be a short fix.}
These issues usually have a cause; sometimes it may be due to other items
not quite right in the user interface and symptoms of that sometimes show up
in odd places and they may not be directly related. Subtle and dismissed, a
few of those quirks are not show stoppers in OS X. A 'safeboot' & disk utility
may resolve some; to find a correct .plist preference file & trash it may, too.
If the computer's hard disk drive is getting full of content you have added, it
may be time to archive image libraries and/or music libraries off the Mac's
internal hard disk drive and then thin out content on the computer. That can
help a computer run better. Damage to data on the computer drive may be
a result (or outright is) of over-filling the hard disk drive. Overwriting content
is sometimes an issue; it could be subtle, too, for awhile. Checked into it?
For some preventative maintenance chores, I have and use OnyX which is
a free running utility tool (which I refer to as a utility interface tool) that pulls
the strings in OS X that some users would not think of the Terminal utility
ways of making them work; this gives you a GUI format, an application to
run various sets of items rather easily. If done without concern, these tools
can do bad things (same as booted Disk Utility, drastic tools are onboard.)
OnyX is a free-running downloadable app from Titanium Software; and since
I only use it maybe once every several months (or sooner if bored or if active
in using one computer more than usual) & have it run in Automation selection
having chosen all the check-box choices, so it will do those. I also have OnyX
set in its preferences, to restart the computer after it is done running those.
This may do more than you need in this selection of Automation. I have never
had any issues with this; but some preference choices system-wide may need
to be set back to your choice, as it can be also set to wipe caches or other old
logs and misc stuff. A few settings won't make much different to default from.
Usually, I prefer not to shut off or restart my computer until such time as when
Activity Monitor shows some issue with virtual memory and swap files or space
on the hard drive being excessively allocated as Virtual Memory. At times, a
restart may be required. My Mac can run a few months without restart, but it is
left to sleep or I will put it to sleep. Even so, some basic background OS X items
may not automatically run as they should. You can force the maintenance cycles.
If the 'show icon preview' does not work even after performing catch-up maintenace
and including OnyX, SafeBoot, and others; and if you have at least 30% of the total
hard disk drive capacity open or free from use, then you may have to consider a few
other ideas. (Removing the plist file may be the only thing you'd need do.) Another
idea in a few cases of more severe odd behavior, and if you updated your Leopard
10.5 to your current/last level through use of the Delta or small update file, would be
to get the larger Combo (last version) and after repairing disk permissions, install it
over the similar system in your computer. 10.5.8 over 10.5.8. Then restart and go in
and repair disk permissions again. Perhaps later on, safeboot and do them.
That much effort is seldom needed. Preventative maintenance and care to not over-
fill the hard disk drive, helps to almost never see such a problem in your Mac OS X.
{In a few cases, people who have upgraded from an earlier OS X version (Tiger-to-
Leopard, for example) and had a problem, may still have a similar problem later. So
it is best to fix issues and not hope to upgrade over them. Unless it is a totally new
bare-bones secure zero-overwritten drive, correct partition map, reformat, new install.
Then, there should be no doubt if there was an odd problem in the software, only.}
Hopefully some of this late night rambling may be of some help.
+Answering a question in these forums can be like replying to a+
+statement thus, "why won't my car go?" And an answer starts+
+out by asking dozens of questions about the car itself and the+
+status of the car, if it has fuel, tires, if it's been in a flood, or if+
+there is an engine, fuel, battery... At least I know yours runs!+
Good luck & happy computing! -
Recording desktop in Quicktime 10 does not work in SL
OS 10.6.8 and QT 10.0 (131)
I want to record one of my desktop processes with QuickTime (v10.0). However it does not work, I get the following message:
The operation couldn't be completed. (OS Status error -108.)
I do get a file that appears to be the recording but it does not want to open. And I do need to force quit QuickTime almost every time the error appears.
On my other Mac, also with 10.6.8, it works fine. So I am puzzled.
Anybody know what this could be? How to fix? Open to suggestions.
I was also looking for a version of QT10 to reinstall it but can not find one. ( I was hoping this might fix it).Why not use QuickTime 7.6.6 which is located inside your utility folder?
I was also looking for a version of QT10 to reinstall it but can not find one.
You can custom install directly from your system disc that came with your computer. Follow the onscreen custom install instructions. -
ADC Studio Display 17" USB not working
Hi,
I hope someone can help.
I have a 17" Apple Studio Display that connects via ADC left over from my old Powermac G4. I recently bought the new Mac Mini (Unibody) and an Apple DVI to ADC Display Adapter to use with the HDMI to DVI Adapter to connect with the Apple Display.
This works perfectly however I have noticed the USB ports on the back of the display does not work. Could this be because the Apple DVI to ADC Display Adapter can not supply enough power via the connected HDMI to DVI Adapter to support the display and its USB ports? Is there a way too get them working again?
Thanks.
ChrisHi. Thanks for that. As you say there must be something wrong with my display's USB circuitry then.
Just one more question, is the USB cable from the DVI to ADC adapter only for supplying power to the USBs on the display? Since the display's USBs are not working, will the adapter still work and power my display without using the USB connecter from this adapter? If so this will free up one of my USB2 ports on the mini.
Thanks again. -
Display Content is Not working in BI 7.4
Hi All,
In BW 7.4, I am trying to display content via Mange Infoprovider. Till 7.3 the data used to show in the BW system itself.
Where as in 7.4 BW system display data redirecting to below URL and it’s calling a webdynpro APP called “rsdmdm_md_maintenance_app” as below URL
http://host:port/sap/bc/webdynpro/sap/rsdmdm_md_maintenance_app?IOBJNM=ZDV_EMPID&sap-language=EN.
Bu this URL giving 500 Internet server error.
Can any one help with what I am missing here? In 7.4 is it possible to display content in BW system itself?
Thanks in advance.
VenkyHi,
Please review following SAP Note. The new behavior (WebDynpro based Master Data maintenance) is now standard since SAP BW 7.4 SP05. Old SAPGui based screen is not possible anymore.
The notes describes the SICF services you need to activate to make it work.
My understanding is that old SAPGui based screen could not handle certain newer data types. As per SAP the new feature has some good benefits such as copy/paster multiple lines from spreadsheet.
1997402 - Master data maintenance is not possible in old GUI based
one
1969105 - Master data maintenance for InfoObjects does not
start
517484
- Inactive services in the Internet Communication Framework
1969092 - Exception when launching master data maintenance for some
InfoObjects; additional option for navigating to application log
Hope this helps.
btw: I only found out this week hard way as we just did SAP BW 7.4 upgrade. :-)
Thank you with kind regards,
Satya,
Resolution
It’s not possible to switch to old GUI Based Master data maintenance. Incase
if new master data maintenance is not working please check:
Check if services as described in note 517484 is active
In transaction SICF activate services starting with RSDMDM*
Check if note 1969092 is implemented already.
See Also
Additionally the new UI has some advantages like editing values directly
within the tables, so it’s not required to edit the values one by one, or the
option to copy and paste values from a spreadsheet directly in to table.
Maybe you are looking for
-
How do i get my security questions if i forgot mine
i cant get my answers right
-
How to handle Drop Down Box on Interactive Adobe Form
Hi, On my adobe form there are some drop down boxes like company code, cost centre etc, actually i need F4 help on those fields, but what i found is it's not possible to have F4 help on adobe form so i have choosen alternative as webdynpro acitvex d
-
On the iPhone has already been activated the maximum number of free accounts.
After updating to iOS 5.1 to 6.0.1 I can not log in to iCloud. The whole thing looks like that I am, one of the turn, and now holds the iPhone when you try to log on I get this message: "This iPhone has been activated the maximum number of free accou
-
Is an update available yet to support working with raw files from the D7000?
-
Redemption Code from package not valid?
I just purchased Adobe Acrobat XI Standard 30 minutes ago and am trying to enter the redemption code on the adobe website. I enter it and the site states that it is not valid. What do I do now?