NT Service can't connect

I've written a piece of software that uses an ODBC connection to an 8.1.7 database. Driver version is 8.1.72. When I execute the software the connection works correctly. When I register the software an an NT Service, and use the exact same connection string, the connection fails, with system error 1114(?). Have tried setting the service to start as LocalSystem, with and without permission to interact with the desktop, and as my own user, which has permission to logon as a service. Still no luck.
What haven't I thought of?

Hi and Welcome to the Forums!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your carrier for formal assistance.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Active Directory Services Can't Connect to Domain

I removed Active Directory services form a server running 2012. I then went to reinstall and reconfigure it, but I keep running into issues. When I launch active directory admin center it gives me an error that it can't connect to any domain, and I can't
make any changes. The local server has already been promoted to the domain controller. Here is the output from dcdiag:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = ACSSVR
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ACSSVR
Starting test: Connectivity
......................... ACSSVR passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ACSSVR
Starting test: Advertising
Fatal Error:DsGetDcName (ACSSVR) call failed, error 1355
The Locator could not find the server.
......................... ACSSVR failed test Advertising
Starting test: FrsEvent
......................... ACSSVR passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... ACSSVR failed test DFSREvent
Starting test: SysVolCheck
......................... ACSSVR passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 03/02/2015 12:00:00
Event String:
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification)
and LDAP simple binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds, configuring the server to reject them will improve the security of this server.
A warning event occurred. EventID: 0x80000734
Time Generated: 03/02/2015 12:00:37
Event String:
The local domain controller could not connect with the following domain controller hosting the following directory partition to resolve distinguished names.
......................... ACSSVR passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... ACSSVR passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... ACSSVR passed test MachineAccount
Starting test: NCSecDesc
......................... ACSSVR passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\ACSSVR\netlogon)
[ACSSVR] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... ACSSVR failed test NetLogons
Starting test: ObjectsReplicated
......................... ACSSVR passed test ObjectsReplicated
Starting test: Replications
......................... ACSSVR passed test Replications
Starting test: RidManager
......................... ACSSVR passed test RidManager
Starting test: Services
......................... ACSSVR passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:21:34
Event String:
Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/02/2015 11:21:58
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:26:01
Event String:
The Vstor2 Virtual Storage Driver service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:26:01
Event String:
The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error:
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:26:16
Event String:
Name resolution for the name teredo.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0x0000002E
Time Generated: 03/02/2015 11:34:32
Event String:
The time service encountered an error and was forced to shut down. The error was: 0x80070700: An attempt was made to logon, but the network logon service was not started.
An error event occurred. EventID: 0xC0001B6F
Time Generated: 03/02/2015 11:34:32
Event String:
The Windows Time service terminated with the following error:
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/02/2015 11:35:01
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:39:08
Event String:
Name resolution for the name _ldap._tcp.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:39:27
Event String:
The Vstor2 Virtual Storage Driver service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 11:39:27
Event String:
The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error:
A warning event occurred. EventID: 0x000727AA
Time Generated: 03/02/2015 11:39:40
Event String:
The WinRM service failed to create the following SPNs: WSMAN/ACSSVR.ACS.local; WSMAN/ACSSVR.
A warning event occurred. EventID: 0x0000000C
Time Generated: 03/02/2015 11:39:39
Event String:
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in
the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the
authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
A warning event occurred. EventID: 0xC000042B
Time Generated: 03/02/2015 11:42:01
Event String:
The RD Session Host server cannot register 'TERMSRV' Service Principal Name to be used for server authentication. The following error occured: The specified domain either does not exist or could not be contacted.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 11:44:31
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 11:45:05
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
An error event occurred. EventID: 0x0000168F
Time Generated: 03/02/2015 11:55:22
Event String:
The dynamic deletion of the DNS record 'ACS.acsolutionsinc.net. 600 IN A 192.168.56.1' failed on the following DNS server:
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:55:22
Event String:
Name resolution for the name acsolutionsinc.net timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0x0000168F
Time Generated: 03/02/2015 11:55:47
Event String:
The dynamic deletion of the DNS record '_ldap._tcp.ACS.acsolutionsinc.net. 600 IN SRV 0 100 389 ACSSVR.ACS.acsolutionsinc.net.' failed on the following DNS server:
A warning event occurred. EventID: 0x000727A5
Time Generated: 03/02/2015 11:55:53
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:55:53
Event String:
Name resolution for the name _ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/02/2015 11:59:53
Event String:
Name resolution for the name _ldap._tcp.dc._msdcs.ACS.local. timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 12:00:13
Event String:
The Vstor2 Virtual Storage Driver service failed to start due to the following error:
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/02/2015 12:00:13
Event String:
The Vstor2 MntApi 2.0 Driver (shared) service failed to start due to the following error:
A warning event occurred. EventID: 0x000727AA
Time Generated: 03/02/2015 12:00:25
Event String:
The WinRM service failed to create the following SPNs: WSMAN/ACSSVR.ACS.local; WSMAN/ACSSVR.
A warning event occurred. EventID: 0x0000000C
Time Generated: 03/02/2015 12:00:25
Event String:
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in
the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the
authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient.
A warning event occurred. EventID: 0xC000042B
Time Generated: 03/02/2015 12:02:47
Event String:
The RD Session Host server cannot register 'TERMSRV' Service Principal Name to be used for server authentication. The following error occured: The specified domain either does not exist or could not be contacted.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 12:05:17
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
An error event occurred. EventID: 0x00000469
Time Generated: 03/02/2015 12:05:17
Event String:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain
controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator.
......................... ACSSVR failed test SystemLog
Starting test: VerifyReferences
......................... ACSSVR passed test VerifyReferences
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : ACS
Starting test: CheckSDRefDom
......................... ACS passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ACS passed test CrossRefValidation
Running enterprise tests on : ACS.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... ACS.local failed test LocatorCheck
Starting test: Intersite
......................... ACS.local passed test Intersite
I've been trying to debug errors one at a time, but I'm having a hard time finding any information that pertains to this issue as a whole. Anything you can tell me about this would be great, thank you for reading.

It was the only server in the network, the only dc in the old forest. When I re-installed ad ds I gave the new forest different name, but I guess the old settings are still in the system somewhere conflicting with the new setup? Is there a way to
purge the old setup entirely and start over with ad ds, or am I going to have to re-install the whole OS? Thanks again for the help.
Honestly, the best way to handle this is to rebuild the server. There are many things that are "left behind" when you remove the Domain / Forest from a Domain Controller. In fact many articles will say after using ADMT (active directory migration
tool) you should decommission the original Domain Controller (aka reinstall the OS).
While you could spend more time trying to get that domain controller working, it absolutely is going to be 1) More reliable 2) faster to reinstall the OS on the old domain controller. If you are still leveraging storage, or services on that domain controller,
you will want to back them up, or have a transition plan before reinstalling everything on the server. I have a feeling if you choose to keep troubleshooting this, you will run into more issues down the road.
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

Essbase Administration Services "Can not Connect to Administration Server"

Hi
Here I am installed Oracle EPM 11.1.2.2 Essbase,Planning and Reporting and after sucessfull configuration. When I tried to open Essbase Administration Console and there is no option to open administration console and I opened the Hyperion extraction setup folder and I installed Essbase Administration Console setup manuallay and after sucessful installation I try to Open and when I create new server and ir=ts created and then I am trying to connect server its throw this error
Error: Can not Connect to Administration Server
Please give me possitive things.
Thanks in advance..

Did you deploy the web applications to one managed server in the configurator, if you did then EAS is probably running on port 9000 so you would need to enter the server in the EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

TS1363 I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid respo

I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.

Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy

When I try to turn on my iPhone 4, it wouldn't turn on unless if I use an iPad Charger. When it will turn on. I can't connect to any WiFi Services or my Service Provider, I can't text or call anyone. When I unplug my iPhone 4 it'll just shut off.

So when I try to plug in My iPhone 4 to any plug it won't turn on or charge unless if I use an iPad charger. When I do get to turn it on. My Phone will Standby for a few seconds( While I'm Typing my 4-Digit Code) then it'll unlock and go to the home screen. Once I'm on the home Screen I can't Call, Text or Email anyone because my iPhone Can't detect any Wifi Hotspots and it also can't connect to my Service Provider, It'll just Say "Searching...". The non-internet apps work perfectly fine. So since I was able to use Just an iPad Charger to turn on my iPhone 4, I tried a Regular iPhone charger that were plugged into a wall or my computer. When its Plugged in, my iPhone will turn on ( Showing the Apple Logo) then turn back off. It'll constanly do this only when it's plugged into a Regular iPhone Charger, Either plugged into a Wall Socket or my Computer. So I Tried to Restore the Phone by using some of the Methods, given by other iPhone 4 Users, non of them worked. My iPhone won't Restart, Restore, Turn on without a Charger, Be Detected on my Computer and Detect my Service Provider. I really need help to fix my iPhone 4. I'm really not sure if it's a Malfunction with the Software on the iPhone, if my Sim Card is Broken. if the System is Corrupted but it only happens Rarely.
Thank you. If you're Reading this. Please Respond.
I need useful information.
If you'd like to Contact me, and give some useful information or ask me any Questions.
Contact me Through my EMAIL : [email protected]

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

Laserjet Pro 400 MFP M425DN Can not connect to HP Web Services

I have a Laserjet Pro 400 MFP M425DN printer on a network running windows 7 and we Can not connect to HP Web Services. When we use the display on the menu it comes back with error "Internal Processing error, try again or check firmware update" We installed the new firmware but still get the same message. IF type in our printers IP address into our browser we get the info on our printer but if we go to the HP web services tap and click enable it trys but come back with a "connection error"
Any ideas?
Thanks
Paul

I just updated my Firmware on this printer today to the latest version dated May 3 2013 and Web Services
worked. Had the same type of problem you had for months and had worked with HP but could never get
Web Services to work at my location with my Modem/Router.
Had tried at other locations and it would work with the old Firmware. But for some reason it did not at my
location with the Modem/Router I was using.
Again the latest Firmware fixed it. I tried all the other solutions that I had found on the internet and non of them worked.

I just got a new iPod for Christmas, it says I can't connect it to iTunes because the "Apple Mobile Device service is not started." Help?

I just got a new iPod for Christmas, it says I can't connect it to iTunes because the "Apple Mobile Device service is not started." Help?

See Here > http://support.apple.com/kb/TS1567

HT201263 Hi when i connect my iphone to pc to use itunes it said :iphone can not connected to itunes bcs the device service is not started so ido not know what can i do!

phone can not connected to itunes bcs the device service is not started so ido not know what can i do!

restart apple mobile device in windows http://support.apple.com/kb/TS1567

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

We traded our home internet service for a Sprint Hot Spot. The hot spot does not have an ethernet port to connect through. Can we connect our time capsule to the wireless hot spot?

Hello, we switched our home internet service from an ethernet modem to a wireless hot spot.
Do you know if there is a way to connect our time capsule to the hot spot?
Everything I read only suggests connecting through an ethernet cable. I'm hoping there is a way to do this.
Any help would be appreciated!
Thanks!!!

No you can't join a wireless hotspot with a Time Capsule directly via it's 'join' option (tried and failed - well to be exact it kinda works but the Time Capsule's ethernet ports no longer work).
What you can do is buy an airport express and use it's 'join' option to connect to the iPhone's hotspot. Then you connect the airport express via ethernet to the time capsule (in bridge-mode).
You can then connect your computers to the time capsule via ethernet or use it's wireless function to set up wireless network (with a different name to that of the hotspot) that your wifi stuff can connect to.
Thingi

I need to restore my iphone but itunes can't connect because it locked with password. I can't input the password becasue it showing no service and needs to be restored.

I need to restore my iphone but itunes can't connect to it because of my password which I can't input becasue it has no service and needs to be restored. what can I do to restore it? Is there a way to input the password?

You will need to put the iPhone into Recovery Mode to be able to restore it in iTunes.
To put your iPod/iPhone into recovery mode:
1. Make sure the iPod/iPhone is connected to a computer with iTunes installed on it.
2. Hold down the sleep/wake button(top button) and the home button at the same time until the iPod/iPhone screen goes black then shows the apple logo( usually 10-15 seconds).
3. Once the apple logo appears on the screen, let go of the sleep/wake button and keep holding the home button.
4. The ipod/iphone screen should show an itunes logo and usb cable if you were successful. A dialog box will appear in iTunes that states an iPod/iPhone in recovery mode has been detected if you are successful.
5. Click ok, then click the Restore button
After that you should be up and running in no time!
I hope that this is helpful.

Mail service on, SMTP on, but clients can't connect -- please help a novice

Hi all,
We use 10.4 Server on a G5 Xserve. A few days ago we had a problem with our server being used for spam. That was fixed quickly enough, but the problem is: while being fixed, the mail queue accumulated more and more mail, and it wasn't going out. The "retry" button didn't work. Repairing the database didn't work.
To make a long story shorter, after reading different things here and on the web, I managed to delete all the messages in the queue. All the users are still there. But now, when I turn the mail service back on, everyone gets a "can't connect" error.
I've used the terminal before, but I've always been following directions; I don't know what to type or why. But if someone with patience can help, I can follow directions, and would really appreciate the help. Right now I'm dead in the water.

OK, I've already admitted that I know nothing about this, so I'm sure this will give some people some laughs. That's OK, so the only thing I've changed was the name of the company. I have more peace of mind knowing I'm not showing who's got problems. The other thing is that I don't know when my part of the history begins. Maybe it's all me, but I don't remember doing anything even remotely close to changing IPs. So here it is:
1 telnet mail.abcde.com 110
2 telnet mail.abcde.com 110
3 telnet mail.abcde.com 110
4 sudo /etc/squirrelmail/config/conf.pl
5 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/
6 update_list.txt
7 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/
8 update_list.txt
9 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/update_list.txt
10 softwareupdate
11 man changeip
12 changeip
13 exit
14 changeip -checkhostname
15 sudo changeip
16 changeip -checkhostname
17 sudo changeip -checkhostname
18 man changeip
19 sudo changeip -gethostname
20 sudo changeip -gethostname
21 sudo changeip
22 /usr/sbin/changeip /LDAPv3/127.0.0.1 10.10.10.3 10.10.10.3 mail.abcde.org mail.abcde.org
23 sudo changeip -checkhostname
24 sudo /usr/sbin/changeip /LDAPv3/127.0.0.1 10.10.10.3 10.10.10.3 mail.abcde.org mail.abcde.org
25 changeip -checkhostname
26 sudo changeip -checkhostname
27 sudo rm -rf /usr/share/swupd/html/061-4590/
28 sudo rm -rf /usr/share/swupd/html/061-4589/
29 sudo rm -rf /usr/share/swupd/html/061-4589
30 sudo rm -rf /usr/share/swupd/html/061-4590/
31 sudo rm -rf /usr/share/swupd/html/061-4590/
32 sudo rm -rf /usr/share/swupd/html/061-2089/
33 grep swupd /etc/swupd/com.apple.server.swupdate.plist > ~/Desktop/update_list.txt
34 sudo mkdir /usr/sieve
35 sudo mkdir /usr/sieve
36 sudo pico /etc/services
37 netstat -an | grep 2000
38 telnet localhost 2000
39 sudo mkdir -p /usr/sieve
40 sudo mkdir -p /usr/sieve
41 sudo chown cyrusimap /usr/sieve
42 sudo chgrp wheel /usr/sieve
43 cd
44 pwd
45 ls
46 cd /usr
47 ls
48 ls -l
49 exit
50 sudo pico /etc/services
51 telnet localhost 2000
52 netstat
53 netstat -an | grep 2000
54 exit
55 changeip
56 sudo changeip
57 changeip -checkhostname
58 sudo changeip -checkhostname
59 exit
60 sudo ls -al /var/spool/imap/user/diradmin
61 sudo ls -al /var/spool/imap/user/kbentley
62 sudo /usr/share/mailman/bin/check_perms -f
63 su root
64 su root
65 su root
66 su root
67 su root
68 fsck -f
69 fsck
70 sudo fsck -f
71 sudo fsck /?
72 fsck /help
73 fsck \help
74 pwd
75 ..
76 12345
77 sudo /System/Library/CoreServices/Finder.app/
78 sudo /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
79 su root
80 su root
81 sudo -u cyrusimap
82 su cyrus
83 su cyrus
84 su cyrus
85 su cyrus
86 su cyrus
87 cyrus
88 sudo cyrus
89 su cyrus
90 su cyrus
91 su cyrus /usr/bin/cyrus/bin/reconstruct -r -f /var/spool/imap/bbills
92 postfix reload
93 sudo postfix reload
94 sudo postfix reload
95 ls -l /var/spool/imap/user/bbills
96 history

Can't connect to Configuration Manager Service manager

So after a failed upgrade to R2, I've had to restore the database as the R2 upgrade corrupted the DB.
I am now working though the minefield of component errors. However I can't connect to the configuration manager service manager, I get this error:
Error communicating with the specified Configuration Manager Site Server
So I have done a site reset and I still have the same issue.
I have tried several accounts, all with full permissions on the site server and in configuration manager. I'm stumped now.
Anyone experienced this before and found a solution?

Hi,
Any useful information in your ConfigMgrSetup.log and windows event log?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can universe connect to restful web service which is not soap based

Can universe connect to restful webservice? I know it is allowed to connect to SOAP webservice. Currently is using WSDL1.1.
How about restful web service which does not have any wsdl file?

Hi,
there is a chapter - Security Configuration at Message Level
in XI config guide which specifies everything you need - this is what you need
so I hope no further explanations are necessary
Regards,
Michal Krawczyk

Can't connect to analysis services

Hi,
After looking through the forum, I haven't seen the problem I encounter.
I am able to connect to the Database Engine, Integration services, Reporting Services but I can't connect to Analysis Services from SQL Server Management Studio although the service is running.
I am using SQL Server 2012.
I have the following error :
Internal error: An unexpected error occurred (file 'pfshcollation.cpp', line 323, function 'PFCollation::Init'). (Microsoft SQL Server 2012 Analysis Services)
The progam location is:
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean toIXMLA)
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.AdomdConnection.IXmlaClientProviderEx.ConnectXmla()
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP)
at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
What can I do to connect?

Hi Thush,
According to your description, you get the above error when connecting SSAS in SSMS. Right?
In Analysis Services, this error turns out to be a the data provider issue. I suggest you re-install the OLE DB Provider for SQL Server 2012.
On the Installation page, choose New SQL Server stand-alone installation or add features to an existing installation.
On the Installation Type page, choose Perform a new installation of SQL Server 2012.
On the Setup Role page, choose SQL Server Feature Installation.
On the Feature Selection page, click Client Tools Connectivity. This option installs
Microsoft.AnalysisServices.Xmla.dll
Do not select any other features.
Click Next to finish the wizard, and then click Install to run Setup.
Reference:
Microsoft® SQL Server® 2012 SP1 Feature Pack
If you have any question, please feel free to ask.
Regards,
Simon Hou
TechNet Community Support

NT Service can't connect

Similar Messages

Maybe you are looking for