NT_STATUS_ACCESS_DENIED and NT_STATUS_NO_MEMORY print problem fix

Just like many on these forums, I tried the SAMBA "smb://" hints given on other thread, but had no real success. Just as many newbbies, I was very frustrated that I could not print from my Mini Mac to my windows XP computer that was serving as my printer host. So the I decided to "google" the NT_STATUS messeges, and when over all the results 1 by 1. This is what I found:
http://forums.macrumors.com/archive/index.php/t-130238.html
Props to Zukutu at the macrumors forums. I think it makes sense, since what I knew of Max X OS, is that it is basiclly a UNIX machine, right?
Now my HP 1115 printer is working perfectly from my Mini Mac. I hope this helps others new to mac.

Hey Guys
I do a lot of printing from Macs to PC printer shares. Here's the steps I use to create the printer connection
- Create a printer on your PC and share it with an easy to remember share name e.g. Test
- Open the Printer Setup Utility on your Mac (it is in
Applications\Utilities)
- Click the Add button on the toolbar
- Hold down the alt/option button and click the More Printers button
- In the top drop down, selected Advanced as the type and select Windows printer via SAMBA as the device
- Give the device a name
- Enter a string in the format as follows in the Device URI box -
smb://DOMAIN\User:Password@Servername/Printqueuename e.g. smb://Sepialine.net\mcahill:[email protected]/Test
- Select the printer model from the bottom list
HTH
Mike
Intel 17" iMac Mac OS X (10.4.4) 1Gb RAM 250Gb disk
Intel 17" iMac Mac OS X (10.4.4) 1Gb RAM 250Gb disk

Similar Messages

Adobe Photoshop CS6 and Canon printer problem!!

Use Photoshop CS6 to edit and print (try to print) to a new Canon Pixma Pro-100 printer. Photoshop is up to date and the Mac runs OS 10.8.5 - Canon printer driver is current at ver. 11.7.1.
When I print from Photoshop to the Pro-100 (let's say a 4X6 landscape snapshot to 4X6 borderless paper) the printer starts up and moves the paper out about 4 inches and then prints the
first two inches of the image, stops and ejects the paper!. I've tried different versions of printer the printer driver and made sure every things is up to date. However, I can print from MS Word,
Nikon Capture NX2, or Canon's own Print Studio Pro and it works fine. Canon is no help because if it works OK with their Print Studio Pro then it's not their issue - I tend to agree with them.
The same thing happens print from Photoshop to 5X7 or 8X10 paper - it gets ejected so far and then only prints part of the image. I've searched the Internet and posted in Forums but can't find
where any one would have the same problem. What I'm hoping for here is someone at from Adobe who's knows Photoshop tech stuff will post here with suggestion because there is no more
phone support for Photoshop CS6. I'd like to really keep this printer and get Photoshop to work with it but if I can't I'm going to offer it up free to a good home! JM Davis

Thanks for your answer, indeed this fixed the problem. Quite stupid I did not see this myself

HP LaserJet - network printer problem FIXED

Hi,
I'm aware this may not work for all, but I've sorted my own problems, which I suspect are common to many who still have a really solid HP (or other) network printer that was no longer available since Snow Leopard did away with Apple Talk.
The answer is to do a cold reset on your printer, give it a new IP address, find this IP by printing a configuration page and enter this IP when you go to set up a new printer. In my case, it automatically found the correct drivers. The drivers were never the issue with vanishing printers; it was all about the network IP address. A quick search online and you will find how to do the cold reset and config page. For my 2100TN, it was a case of holding down the cancel button when powering up the printer until the lights flashed for a new IP, and to print, press both buttons.
Hope this helps.

Problem solved.
I upgraded the printer's firmware which resolved the issue.
Thanks anyway! :-)

OS10.8 and HP printer problems

I'm having problems printing wirelessly with my MacBook Pro OS10.8.4 and my HP Officejet Pro 8500A.
Initially I had no problems at all. However now, I can print in colour, but each time I select black and white printing the printer crashes (lights flashing and a message to turn the printer off).
HP have been very helpful and replaced the printer. It worked fine for a while, but now it's happening again. Interestingly, I have no problems printing using my MacBook Air under OS10.7.
Any ideas?

I would recommend that you first update the firmware on the printer by using the download at the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-94588-3 &cc=us&dlc=en&lc=en&os=4142&product=4116838&sw_lang=
After that, go into system preferences and select Print & Scan. Right click the rectangle listing your printers and select "Reset Printing System"...Warning: this will delete any other printers installed.
After that, go to the following link and download the most recent version of software available for your OS and printer: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108394- 1&cc=us&dlc=en&lc=en&os=4142&product=4116838&sw_lang=
Install that and let me know if it helps.
Best of luck,
Kyle

ALV Grid and Icon : Printing Problem

Hi, i develop some reports using ALV Grid and Icon and i'm facing printing problem, all report that using ALV grid with the option icon = 'X' cannot print properly, all the character field showing improper icon instead of the text. While all the ALV grid report with the option icon = ' ' can print normally.
Thanks.

Hi,
Check the Demo Program <b>BCALV_DEMO_TOOLTIP</b>, Here i am able to see the Output Properly, and also able to Print them.
Regards
vijay

WRT300N and network printer problems

I have a pc wired into the router and a printer wired into it as well, they work fine. I have a laptop that can access the router wirelessly and it can get out to the internet. When I use the laptop to try and find the printer using the printer setup wizard its not found on the network, all i get is the microsoft windows network option. The Printer is an HP 7780 model and has the wireless option, went with the the cable to try and limit complications. Any help with this would be greatly appreciated.
Thanks.

Depending on the operating system (Windows XP) go to the control panel and click on the Network Wizard and set up both computers and during the wizard it will give you the option to enable File and printer sharing. After you set up your network you should be able to see the other PC and printer from each printer. Also make sure you have TCP/IP enabled by clicking on start>control; panel>Network connections and right click on the LAN (wired or wireless depending on which one it is) and clicking on properties. In there make sure TCP/IP is checked. You may have to install any software on each PC that came with your printer.
Richard Aichner (Ikester)

New update and HP printer problems

I recently installed some automatic updates for my computer, including the MacBook SMC Firmware update along with something else that was recommended (but I don't remember what it is). Immediately afterwards, I began having printer issues (ie, I could no longer print). I then fiddled around, attempting to reinstall my HP software. However, I encountered a major problem when my computer wouldn't recognize that there was a printer on my wireless network. I had never had this issue before and another wireless computer could still print perfectly on the same printer. I called Mac and they could not solve the problem. Then, after an hour and a half on the phone with HP, we finally got the computer to recognize that there was indeed a printer on the network. In order to solve this problem we had to reset the entire printing system, manually delete any HP files from my computer, and then reinstall the latest version of the software. I just wanted to voice my concern that the latest updates are not compatible for some reason with HP printing software already installed. If you are having the same problem, you may have to start from scratch to fix it. When I called HP, they said that had been getting identical calls all morning due to this update.
MacBook - White Mac OS X (10.4.7)

Go to your application folder > open utilitis folder > and click on disk utilities.
Select the hard drive and repair the permission.
http://docs.info.apple.com/article.html?artnum=25751
Hope it will resolved it
Good Luck

Black and white printing problem on Epson Artisan 50

When I print a black and white photo on glossy paper, I don't get black and white. I get a kind of purple hued black and white. Black text below, however, is perfectly black. So it seems it's not some kind of fault with the ink. I am choosing "black/greyscale" rather than "color". Any idea why this is happening and how to fix it? I have tried printing from different apps, including Preview, and same thing happens. Also different black and white images.

Yes, should be, but I'm not. Epson ink, Epson paper and same problem. The image is black and white. Converted in Photoshop. Print is set to "quality". Epson controls color. Not vivid. Paper is set to glossy. All as it should be.
What I have found by searching is this quote:
"Inkjet printers use their color inks and the black ink to generate B&W prints. But there are some noticeable drawbacks in doing it this way. Namely the possibility of having a color cast on your B&W prints, which is a barely perceptible color tint (usually green or magenta) that prevents your print from being true black & white.”
Other pages confirm this issue, so it seems that you just can't get decent, true black and white with a color printer. At least this color printer.
Do you find that when you print a black and white image you get true black and white with no color cast? Interestingly, I do when I print on plain paper, but not on glossy.

Canon MF 4412 printer problem fixed

I got a problem on MF4412, the canon 4412 is connected the newest airport extreme , it get configured. But I got same problem described about on my leopard, lion, even worst on iOS, it does not find the printer. But I got a Windows 7 starter NetBook ...haha it works, I can print it from Windows. what is the problem then,it works on Windows but not Apple's OS??????
So it works on windows,it is really fixed. Anyone from Canon or Apple could help fixing the problem on Apple's OS?????? help

Canon has the MF ScanGear v1.30 for Mac OS X. With this software installed you can then set the MF Scan button online (showing USB Scanner or something similar) and then use either the MF Toolbox application (included with the driver) to scan or use Preview to scan your document.

HP 5150 printer problem fixed

I was having a strange issue with my HP printer 5150 and printing Entourage emails that were more than one page long. I contacted tech support at HP via email and was instructed to delete this preference and that preference, unplug the USB to the printer, a folder or two but was still having the same problem (the paper would feed a couple of inches, back out again- all in slow motion- feed again a little bit, back up, then finally feed the paper-not in a smooth motion- through slowly and print the last page. About 4" of the sheet would remain in the printer when it was done and then spit it all the way out.) so I replied and said all still wasn't right. So the tech support person said that to open an email- select Page Setup- Format for- select printer (mine was set to Any Printer....) and try again.... I did and it works just fine!! So the simplest answer was the one that worked. Maybe if someone else is having an issue with printing (particularly Entourage messages) will find this helpful. And I have to admit that HP tech support was pretty prompt. Judy

Just a helpful hint I wanted to pass along to someone else that may have the same issue.

InDesign CS4 Export and PDF Printing Problem

Whenever we print PDFs created from InDesign CS4 documents that contain transparencies, drop shadows or gradients we've been having issues. White boxes will appear instead of the drop shadows and transparencies, and the colors of the gradient images will be completely different from what's in the original file. Of course, the PDF always looks perfect on the screen, and the .indd document prints correctly. The problems only occur when we print the PDFs.
We create the PDFs in InDesign using the File>Export function, and we've tried every version of PDF compatibility from 4 to 8. We're not exactly sure if this is an InDesign issue or an Acrobat issue, but we wanted to check and see if there's something specific we need to do doing during the exporting process to prevent this from happening.
Our IT department has been working on this but they're stumped, and the fine folks at Xerox insist that our printers are "fully operational."
We quickly looked through previous postings and didn't see another problem like this one listed, but we apologize if this has already been addressed and we are posting the same issue twice.
Any suggestions or insight anyone can offer is greatly appreciated. Thank you.

Thanks Bob! I followed the information the links you provided and it solved our problems! I won't bore you with the details of how long how many different people have been trying to solve this issue, but let's just say it's a lot.
You are being virtually hugged and/or high-fived by our entire Communications, IT and Printing Departments. THANK YOU!

Migrating from CR9 to CR11 Release 2 and Printronix Printer problem

Hello,
Currently we are in the midst of migrating all of our report for one of our main application from CR 9 to CR11 R2. The entire migrating, importing, as well as publishing for tall the report runs smoothly. We even can view the report once we called up the report from the repository to be displayed in its infoview. But my question is:
1. Is there any way that the report can auto adjust its size once the report been print out? This is because I believe in CR 9, ( we are using RAS9 btw) once printe out; the report will be automatically adjusted, different than the CR 11 which is WYSWYG. This has caused some of the report layout been out-of-margin as well font sizing are not the same anymore (sometimes big and sometimes too small) and not the same as per old (CR 9 version) report.
With this explanation, it is hope you guys or any of your team can give me some solution or advice on how for me to cater this problem.
2. Another thing that I need to clarify with you guys is does CR 11 being supported by Printronix 5000 series of printer? This is because when the same title report when being generated from CR 9 and CR 11 both will come out in a different output/ result.
CR 9 is a readable but yet in CR 11 which I believe is a WYSWYG Windows Generic Text driver report application wonu2019t be able to print out nicely as some of the font is smudge and not readable. If this is the case, I need a clarification from you guys as whether the printer is being supported or not?

Hi Daniel,
Where are you seeing the differences, in Crystal Reports or through BusinessObjects Enterprise? If it's from BOE, make sure you have the Printronix printer driver installed on the Page Server machine, and that the Page Server service is running under a domain account that has local admin rights.
Regards,
Wallie

Template and format printing problem

Hello I have pages 08 in French installed on my Intel Imac; the problem I am experiencing is when using a pre-defined template,
I open a template such as elegant letter (which has borders) I format all my text and graphics I then do a print preview which shows everything is good but when I print I am missing the bottom part of the border and the information, I have noticed that my default printer setting is set to A4 but when I change it to letter format I still am missing the bottom of the sheet, does anyone know how to solve this problem
Thank you !

Airport Extreme and USB Printer Problem

I have an Epson printer connected to the USB port of my Airport Extreme. This has worked just fine for years. But from today neither my iMac nor my MacBook Air can "see" the printer any more. I have rebooted everything a couple of times, but still no joy.
I have connected the printer directly to a USB port on my iMac, and all is well, so I guess the problem is not with the printer.
The only thing significant done to my system in recent times is the latest security update, which I installed yesterday.
Can anybody give me a clue as to why this problem has suddenly raised its head after all these years?

Hi bricknell,
It sounds like you are experiencing some printing issues after performing an update to your computer’s software. Here is an article for you with some troubleshooting steps that will help you address this issue:
Troubleshooting printer issues in OS X - Apple Support
https://support.apple.com/en-us/HT203343
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Paper Design Printing and PDF printing problem

I'm using Report Builder 9.0.2.0.3 to create a report that I create a frame , in the frame i cut and pasted text by clicking on the A then pasting the text into it.
I then created a frame with that was at the next level in the object manger with a hyperlink in it. This fame was at the level where the text was that I pasted in the paragraph above. I placed it in the PaperLayout where I wanted it and ran the paper report and it look just fine in the PaperDesign Layout and all so when I create the PDF format and the link works in PDF. But when I print the paperlayout the link prints down a few lines on the page. When I print it through the PDF browser, it prints ok, only the paperlaout has a problems. I pasted the whole page of text before I placed the link where I wanted it.
Is there something else I can try? Appreciate any suggestions or explain, why it moves.
I even got the link to be the color blue.

If I understand the question correctly, you have a static boilerplate text which has some paragraphs. To add hyperlink to some part of the text(not the whole text object), you are placing a frame on top of that particular line of text.
When you Run to Previewer
(or File->Preview Format->PDF/HTMLCSS/..), Report uses screen surface for Fonts and you see it correctly.
However, when you print it from Reports or do File->Generate to File->PDF/HTMLCSS/.., Reports uses the default printer's Fonts for formatting. This means that there could be a slight difference in how the text is formatted in the output as the font metrics for the text might be different. The frame containing the hyperlink might be in the same place where it was placed, however the text might have formatted differently. The text which was overlapping with the frame might have formatted little above or below the frame.
To solve this, instead of using separate frame for hyperlinking texts, you can divide your text and create separate boilerplate text objects for the text which needs to be hyperlinked. You can set the hyperlink property in the Property Inspector of this object. This way, the hyperlinks will be proper in all cases.
regards,
Siva

NT_STATUS_ACCESS_DENIED and NT_STATUS_NO_MEMORY print problem fix

Similar Messages

Maybe you are looking for