Ntbackup issue windows 2003 server

Error returned while creating the volume shadow copy:0x8004230c.
Error returned while creating the volume shadow copy:8004230c

Hi,
Firstly, installed the hotfix KB 968502 to update the files Swprv.dll, Vssapi.dll, Vssvc.exe and Volsnap.sys.
A system state backup operation fails on a Windows Server 2003-based computer if the computer belongs to a site that uses high latency WAN links
http://support.microsoft.com/kb/968502
Then Re-registered Vss dlls following kb article below:
Various issues may occur on a Windows Server 2003-based computer that is running the Volume Shadow Copy Service
http://support.microsoft.com/kb/940032
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Upgrading 6.1 to 7.0.2 Issues - Windows 2003 Server SP-1

Last night I attempted to upgrade our Standard version
CFMX6.1 to MX7.0.2 on our Windows Server 2003, SP-1, and I
encountered errors consistent with those described in TechNote
228c3aaa --
http://kb.adobe.com/selfservice/viewContent.do?externalId=228c3aaa&sliceId=1.
So far, the first 3 solutions suggested by the TechNote didn't
work. During on installation attempt, I didn't have option to
install MX7 as "Server Configuration" because it was grayed out),
so I uninstalled MX7 (wanting to just get back to a working version
of 6.1). Well, that really screwed things up. My website could no
longer process .cfm files, and the CFIDE directory was complete
gone.
So, I installed MX7 twice more...the first time with 4
errors, the second with 2. I then used the Web Server Configuration
Tool (the one included in MX7) and now my sites seem to be working,
but as 6.1...which is better than not at all.
Here are my questions:
1) Does the 4th solution (copying the CFusionMX7 directory
from another working server) really have a chance at working
correctly?
2) If it does, will MX7 know the first time I open the admin
page that this is a new upgrade, and thus walk me through the
Migration Wizard (which I really want)?
3) What do I need to do to get my websites to run with the
MX7 extensions, rather than the MX61 like they are now --assuming I
get questions 1 and 2 answered?
I know this is a lot to read. Thanks for taking time to
consider helping me out.

Hi Ken,
Thanks for the response. Couple follow up questions:
As far as the migration/configuration wizard goes, here is
what I am looking to migrate:
- Data Sources
- custom tags
- email server setup
- missing template settings
- Java and JVM -- Server Settings
I think that's it. So, given that, what would the below
adminConfig.xml need to look like? Again, I am upgrading from MX6.1
to MX7.0.2. Let me take a stab at it:
<setupconfig>
<runsetupwizard>true</runsetupwizard>
<runmigrationwizard>false</runmigrationwizard>
<runmxmigrationwizard>true</runmxmigrationwizard>
<migratecf5>false</migratecf5>
<migratecf6>true</migratecf6>
<setupoptions>
<sampleapps>false</sampleapps>
<odbc>true</odbc>
<enablerds>false</enablerds>
</setupoptions>
</setupconfig>
My second question might be irrelevant, but I am curious. The
way it is setup now, I can't get into the CF Admin page (since the
uninstall of CFMX7 removed it), but I know I am running 6.1 because
I tried to hit a test page with a <CFDOCUMENT> tag, and CF
said it didn't know what that tag was. But, when I go into IIS and
look a the Application Configuration for .cfm extensions, it has a
mapping to C:\CFusionMX7\runtime\lib\wsconfig\jrun_iis6.dll. Any
ideas?
Thanks so much for your help.
-tom

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Crystal Ras 9 on Windows 2003 Server, IIS6.0, single threaded?

We have just migrated from Windows 2000 server to Windows 2003 Server over the weekend. We ran into an issue with Crystal Ras 9.0 where the server serving up reports slower that our previous box. We are using IIS 6.0 and .net 2.0 framework with 1.1 installed for backward compat on our some of our old legacy codes. From what our developers can tell, the issue seems to be Crystal Ras queuing up the request and process them one at a time. That didn't happen before the migration. In fact, we also saw it working in our test environment before the migration. Once the pool is filled no further reports are generated which causes all report to stop which also starts to hang our server. They symptoms is worst under heavy user load. We tested with 6 simultaneous users and all 6 are done at the same time no matter the size of the report. Even the one that fail with an error message came up at the exact same time.
Are there anyway we can adjust the IIS pools and or Crystal Ras to support additional threads? We are connecting to Windows 2008 SQL Server EE. Any suggestions and or help is appreciated. I cannot find any references that would help us diagnose this further.
Also, if you can also detail the cost to buying a phone case, that would be helpful as well.
Thanks
-atiwat

Since you are not changing the version of RAS, I am not sure why the queuing would be different on different Operating Systems? You may want to check on how the queuing is setup on the WIN 200 server and duplicate that on the WIN 2003 server. Also, RAS has a limited number of licenses out of the box. Ensure that you are using the same license on both environments.
Re. phone support. You can obtain a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
However, please note that support of version 9 products terminated years ago, so you will not be able to get support for your version. To get phone support, you will have to upgrade to a supported version of RAS (XI r2 at minimum).
Ludek
BTW.; Windows 2008 SQL Server EE came way after RAS / CR 9 and has thus not been tested in this environment...

ORA-12546 error during installation of 9.2.0.1 on Windows 2003 Server

I have encountered an error whilst installing oracle 9.2.0.1 on a Windows 2003 Server. The error appears in the final part of the installation, when the Database Configuration Assistant is performing some work - it reaches the part where it creates the database instance - here we get the "ORA-12546: TNS Permission denied" error - this part of the installation is marked as failed - i can retry it as many times as i want but the same thing happens. If i finish the installation (even though the error has occurred) the oracle installation doesn't really work . I can't open the Database Configuration Assistant and don't really have a sysdba user. However all the services seem to be running fine (even the tns listener)
I was wondering whether it could be a problem that would be solved with the 9.2.0.3 patch - but this patch assumes that you have performed a proper working installation of 9.2.0.1, so I'm not quite convinced that the problem is related to the oracle version.
I've read other threads where the problem has been read/write privileges on some files and folders, but this shouldn't be an issue when I'm logged onto the machine as a local administrator.
The install.log files don't really provide any extra information.

I have exactly the same problem installing Oracle on a Windows Server 2003 X64 Enterprise Edition. I have Intel Xeon processors (EM64T).
I tried to install Oracle for 64 bits, but it didn't work. Now I'm trying to install 32 bits version of Oracle, and I get the same error and the same problem, mentioned above.
Can anyone help us, I can't figure out a way to solve it. I don't know if Oracle for 32 bits is not compatible with that version of Windows, even if it is supposed to be.
Thanks!!!!

Can't connect my Mac to my Windows 2003 server shares via SMB

Hello all
So my problem is I have my Powerbook running 10.4.7 with all the latest security updates and I cannot connect it to any shares on my Windows 2003 domain controller. Everything was working fine and I could connect to the server with no problem till about a month ago. However, I can still connect to the Windows 2000 domain controller with no problem. The error I get when trying to connect is "Could not connect to the server because the name or password is not correct". I did try clearing out my keychain, making sure all of the authentication policies on the server are correct (disabling the digitally sign commucations always policy), and I even went as far as editing a .conf file in /etc/ folder that allows for passwords to be sent without any encryption (I forget exactly what I changed but I can post that later when I get home from work) and none of this has worked. I unfortunately don't have another mac to test out connecting to the Windows 2003 server. Does anyone have any ideas of what I could do to try and get this issue resolved?

TO share out as afp you need to have file and print services for macintosh installed on the 2k3 Server.
O n the main management console click on the shares icon on the left. then click the "link" create a share. The wizard will guide you through the process. i forget the order of progression but i beleive its the second or third part in the dialog it will have 2 check boxes, the top one checked by default, is to share it for windows/smb the second (lower box) is to share as AFP for mac check this box and change the share name if you like. then proceed through the rest of the wizard. Make sure you configure the security/sharing prefs for access.. we typically remove the everyone policy and add one for Authenitcated Users, and ofcourse Administrators.

Oracle 10G slow Performance on Windows 2003 Server

Hi there,
Looking for a little assistance in locating a bottleneck that's started to hit our system this week. It's really odd because it's been starting around 10am every morning this week.
today is the worst that I've seen it because it's almost brought the system to a halt.....
We're running Oracle 10.2.0.1 64b on Windows 2003 Server 64
The server has 16 processors and 64GB of RAM currently the CPU is sitting at 5% and the RAM usage is at 16.4GB
It's a blade server with a SAN backend and I'm assuming the latency is coming from the disk but I need to determine this for a fact.
I've only been a DBA for about a year and I'm stilling learing how to locate and identify issues. According to OEM I'm seeing
a ton of I/O from the users. So anyways, any help or insight would be much appreciated and a learning experience for me.
Thank you for your time and asistance.
SB

Thank you for the reply!
We've had finding one FOREVER, I can't resolve it and I've read somewhere to ignore because OEM is false reporting. I'm adjusting DB_Cache now...
Isn't possible that too much cache could be bad for the system and cause slow downs?
FINDING 1: 100% impact (29725 seconds)
Significant virtual memory paging was detected on the host operating system.
   RECOMMENDATION 1: Host Configuration, 100% benefit (29725 seconds)
      ACTION: Host operating system was experiencing significant paging but no
         particular root cause could be detected. Investigate processes that
         do not belong to this instance running on the host that are consuming
         significant amount of virtual memory. Also consider adding more
         physical memory to the host.
   RECOMMENDATION 2: DB Configuration, 100% benefit (29725 seconds)
      ACTION: Consider enabling Automatic Shared Memory Management by setting
         the parameter "sga_target" to control the amount of SGA consumed by
         this instance.
FINDING 2: 51% impact (15210 seconds)
The buffer cache was undersized causing significant additional read I/O.
   RECOMMENDATION 1: DB Configuration, 9% benefit (2685 seconds)
      ACTION: Increase the buffer cache size by setting the value of parameter
         "db_cache_size" to 7568 M.
   ADDITIONAL INFORMATION:
      The value of parameter "db_cache_size" was "6912 M" during the analysis
      period.
   SYMPTOMS THAT LED TO THE FINDING:
      SYMPTOM: Wait class "User I/O" was consuming significant database time.
               (84% impact [25073 seconds])

EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asap

hi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu

Oracle 9i 32 bit ON Windows 2003 server 32 bit

Hi all
I have oracle 9i 32 bit istalled on HP server with windows 2003 server 32 bit, 8GB ram.
I am trying to increase oracle memory size (SGA + PGA),
but when I exceed 2GB for (SGA + PGA) it gives me error (ORA-27102 : out of memory)
Is it because the windows 32bit ?
How to manage this issue?

The maximum amount of memory that can be allocated on a Windows Server 2003 is 4 Gb.
If you have Windows Server 2003 Enterprise Edition, it supports 32 GB of physical RAM and Windows Server 2003 Datacenter Edition supports 64 Gb by means of the Physical Address Extensions (PAE) feature.
You should declare the 3 Gb switch that is in the Boot.ini file with Microsoft Windows Server 2003 so it addresses more than 2Gb. So verify which windows 2003 server edition are you currently using.
~ Madrid
http://hrivera99.blogspot.com

Oracle 9i on Windows 2003 server - DBCA error

1. This is the error message that I get when I am trying to install the 9.2.0.3 software in a new oracle home. There is a 10g database which sits in a different Oracle home. The OUI runs smoothly until it comes to the point where the Database Config Assistant tool starts running and then I get this error and the installer hangs. Could anyone let me know why I might be getting this error.
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at
     at oracle.sysman.assistants.dbca.backend.Verifier.isRawFeasible(Compiled Code)
     at oracle.sysman.assistants.dbca.backend.Verifier.processRawConfigFile(Compiled Code)
     at oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.performOperation(ProgressOnlyHost.java:138)
     at oracle.sysman.assistants.dbca.backend.Host.startOperation(Host.java:2171)
     at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:99)
     at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Agent Config Asst
Parameter "orahome" = C:\Oracle\product\ora92
Parameter "nodeinfo" = NO_VALUE
java.lang.UnsatisfiedLinkError: initializeCluster
     at oracle.ops.mgmt.nativesystem.WindowsSystem.initializeCluster(WindowsSystem.java:390)
     at oracle.ops.mgmt.cluster.GetActiveNodes.initializeCluster(GetActiveNodes.java:260)
     at oracle.ops.mgmt.cluster.GetActiveNodes$ClusterWareThread.<init>(Compiled Code)
     at oracle.ops.mgmt.cluster.GetActiveNodes.<init>(GetActiveNodes.java:139)
     at oracle.ops.mgmt.cluster.GetActiveNodes.create(GetActiveNodes.java:158)
     at oracle.agent.AgentCA.configureOPS(AgentCA.java:74)
     at oracle.agent.AgentCA.main(AgentCA.java:39)
Exception in thread "main"
FYI - I have installed the OUI patch Oracle Universal Installer release 2.2.0.18.0 for Windows and the Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows after I installed the 9.2.0.1 database software.
I then tried to run the DBCA tool from the 'Start > Programs>Oracle 9ihome>' menu to create the new Oracle 9.2.0.3 database but the DBCA assistant would not start up.
2. I have a related question:
Has anybody performed a downgrade of Oracle 10g database to Oracle 9.2.0.3 database using export/import?
Can you perform a full database export of the Oracle 10g database using the 9.2.0.3 export utility and then perform a full database import into Oracle 10g? I have read some documentation that states this is not possible. Can anyone verify or confirm how they did this migration? So is the only option then to perform a table or user level export?
Also, if both the databases reside on the same Windows 2003 server box, how can you ensure that the source database files are not overwritten?
Any help would be appreciated.
Thanks,
Vishal.

It only happens when you have oracle 10g and Oracle 9i on the same machine.
You can run 9i dbca successfully, if you rename the 10g "orasrvm.DLL" found in any 10g BIN directory. Rename it back after you are 9i dbca is complete.
Please complete details for this issue see
http://orafaq.net/maillist/oracle-l/2004/10/08/0335.htm
Thanks
Ravisayal

XMII installation on Windows 2003 Server ( 64- Bit)

Hello,
Can we install xMII 11.5 SR01 on Win 2003 server ( 64 -Bit ) ??? When i am trying to download xMII software from SAP market place , under xMII downloads
-> i can see only win32 link.
Thanks
Sharat

Sharat,
Did you try installation? I think that hasn't problem. The Windows 2003 Server has the full compabillity with x86 (32 bits) softwares.
Post here your issues, I will try to help you. I'm very interested in this results.
Regards,
Vinicius Martins
Neoris/Konitech
Brasil

Error in accessing application on windows 2003 server

error on accessing the application on windows 2003 server R12
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
First time i login sucessfully but now its not working.

Hi Mushy;
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.First try to run autoconfig and retest issue. If you have still same error check log file for more details
Also check:
500 Internal Server Error Servlet error:
500 Internal Server Error Servlet error:
R12 Startup Issue
Regard
Helios

How to install 11.5.10 on VMWare with Windows 2003 Server?

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

Ntbackup issue windows 2003 server

Similar Messages

Maybe you are looking for