_NTFS - File system corrupt

A couple of weeks ago I purchased a new Seagate HDD because the old hard disk was failing. Now I get a message every day in the event viewer that the NTFS file system structure on the disk is corrupt and unusable. I have run checkdisk several
times, but the message keeps reappearing. I also downloaded Update for Windows 7 for x64-based Systems (KB982018), but I still receive the message. I do not know how to delete shadow copies on C:.

Hi,
What is the result of chkdsk command?
Generally, if you got a corrupted disk, in the result of chkdsk output, you need get information about disk fault.
If this is a hardware issue, please contact the device manufacture for more help.
Alex Zhao
TechNet Community Support

Similar Messages

File system corrupted *after* it was unmounted

Hi all,
I'd be interested in any opinions on this problem.
I recently bought a 1TB Samsung Story Station 3 usb hard drive for use with Time Machine.
This model of drive has a power switch on the front. Most of the time I don't need hourly backups so my plan is to leave the drive turned off most of the time and only turn it on when I feel the need for automatic hourly backups.
A beautiful setup... except... The file system keeps getting corrupted and it is not always repairable.
What is happening?
My procedure is to eject the disk then switch off the drive.
About half the time an immediate disk verify will report that the disk requires repair.
I have tried variations of this with very similar results. Here is a typical failure scenario:-
1 - Start Time Machine "Back Up Now"
2 - Let it copy some data then stop the backup (if necessary)
3 - Eject the disk
4 - Switch off the drive
5 - Switch on the drive
6 - Verify
Variations on the theme...
I have tried the drive with and without a bootable image restored to it and therefore with and without journalling on the file system (I believe).
1, 2 - I have tried copying data using finder instead of using time machine.
3 - I have tried umount -f and diskutil unmount
Note that umount without -f reports the drive is busy but other ejection/unmount mechanisms work.
Is this related?
The only thing that may have made a difference is that powering down the mac, instead of just the drive, after ejection has not yet resulted in a damaged file system.
The obvious conclusion to draw is that a buffer somewhere is not being flushed before I turn off the drive, but is this buffer in OS X or in the drive itself?
In either case I assume other people are having the same problem.
For now I will just leave the drive turned on all the time. Maybe this is what everyone else does so nobody else has sees the problem.

I need help with my MP3 Player. This is the second one I have bought and it keeps going to 'File System Corrupted'. Its an RCA MP3 Player. Holds 5GB's. My first one lasted about 6 months and this one only 3 months. I don't drop it. Like maybe once, but on a soft floor and its never been thrown or beaten on. No marks on it from being dropped or hit on anything. Also I can't get it to respond to my computer. I plug it in and says, 'File System Corrupted'. There needs to be like a way to fix it. Other wise the people who built it are getting money easily with a device that works only a short limited amount of time. I've pressed my power button and held it for 0 seconds. Nothing happens. I'm really annoyed with this device. I've waited much money on it. Is there at all a way to fix it. ~Dark Warrior~

CC configuration causes freezing and file system corruption

I have received no response for:
http://forums.adobe.com/message/6074118
It is a major issue, can I file an issue/fix request somehow?
Basically it appears that the default configuration when installing the complete product suite causes the OS (OSX Mavericks) to freeze unpredictably and render the system unusable unless shut down and rebooted. This may result in file system corruption and data loss requiring complete reinstall of OS and all products.
Some have mentioned 'drive' is causing this, but I am not familiar with that component and do not see any options to remove or disable such a product in CC.
I do not want any non-essential add-ons (like Bridge?) - just a reliable production configuration so I can get work done.
The risk of having the system 'locked up' or file system corrupted is unacceptable.
Thanks,
Mike

Hi mkrjf,
Please enable root account and try to use Photoshop and let me know if still the same behavior.
Root: http://support.apple.com/kb/PH14281
Regards,
Romit Sinha

Oracle vm 3.1.1 server pool file system corruption

Hi
I have a small lab environment composed by 2 Oracle VM Servers and SAN access.
This morning somehow the OCFS2 Server Pool File System (the 12GB one) corrupted and the Server Pool seems dead. How can I recover from this error? I looked in the documentation and MOS but found nothing
Thank you

I know it would be a lot of work in such a scenerio. I don't know what you're using for storage but you could snapshot or replicate the pool storage to create a backup that can be restored.
I do wish they would let you select more than one VM guest in the VM Manager. Would be really nice to have such. Seems like it would be a rather easy feature to implement.

Windows has detected file system corruption on local disk. How can i solve this problem?

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>chkdsk
The type of the file system is NTFS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
4 percent complete. (148991 of 343808 file records processed)
Attribute record (128, "") from file record segment 154351
is corrupt.
4 percent complete. (157441 of 343808 file records processed)
Attribute record (128, "") from file record segment 165044
is corrupt.
Attribute record (128, "") from file record segment 170460
is corrupt.
5 percent complete. (171904 of 343808 file records processed)
Attribute record (128, "") from file record segment 176325
is corrupt.
Attribute record (128, "") from file record segment 176329
is corrupt.
Attribute record (128, "") from file record segment 176849
is corrupt.
343808 file records processed.
File verification completed.
3390 large file records processed.
Errors found. CHKDSK cannot continue in read-only mode.
C:\Windows\system32>

well actually HP notebooks bioses have some diagnostics an user can run: HDD test, memory check, battery check thats all.
Still U can use HD Tune if U download it - freeware. But Hard Drive test U can do in Bios also works very well. I suggest this one cause when it detect something HP wont be oposing to U'rs repair request.
click on Kudos if i helped U

Help - odd file system corruption.

I have something very worrying going on on my system. The contents of an important folder is being listed differently in 3rd party applications vs the Finder. Apps which use a non-OS file browser cannot see the up to date contents (its an important project I'm currently working on), instead they only list folders from months ago which are now long gone and don't show the current true contents at all. Eg Cinema 4D's Content Browser can't see the current files correctly, but it can just fine via the OS Open/Save dialog.
Even worse is that Chrono Sync has exactly the same problem. When it syncs it correctly lists some of the current files that I'm working on, but in the Anylise section, manually drilling down to my working project folder again shows the incorrect contents!
I have copied the directories to a new HD but even THEY show the same errors when not viewing the contents directly with Lion file browsers***
I can remember once when I first saw this in Cinema 4D I immediately checked in the Finder - and the Finder showed the wrong contents too !- I refreshed the Finder window by clicking a different folder and back to the working directory which then updated before my eyes to the correct contents.
How can I fix this? It seems like there is an immenent serious corruption about to happen to my files and/or disk. Disk Utility shows no errors, nothing to repair. Can/should I use Diskwarrior or some other repair app. Help!
(***I just remembered that I used CCC in block level copy mode so this might account for why the corruption has been transferred to the new drive. I am copying the working directory to the new disk using drag nd drop in the Finder to see if that helps. However I still need the underlying corruption in my User folder repaired)

Yes, I have quite a comprehensive backup strategy in place (involving a Drobo for nightly CCC backups, a CCC nightly bootable disk clone and TM for hourly backups). The Block Copy is for the bootable disk. The nightly Drobo backups are done with vanila CCC file copying,
Disk Util does not find any problems, neither did Disk Warrior. SMART is all OK.
However as I said, the problem is present on one of the backups as well which has put the integrity of the rest of my backups in doubt. also I have tried a direct Finder copy to a new drive (instead of CCC block copy) but the problem persisted.
I have however come up with a temporary fix: I moved the current folder to the trash, navigated to the parent directory using Cinema 4D's Content Browser wherein it 'saw' the ancient folder once again. This errant folder was now also visible in the Finder since the original folder (which has the same name) was now in the trash. I renamed it and moved it to the trash too. Then put the original folder from the trash back into its parent directory and emptied the trash removing the errent folder for good. It seems that did the trick of updating whatever caches or databases were broken and all my apps can correctly see the correct folder and its contents again.
This 'historical' version of the folder was being linked to by 3rd party file browsers I think because in the past it had the same name in the same location as the current folder. Where and how the OS got confused is still a mystery. Does it keep different file system records for the finder vs other apps?
I am not 100% convinced this is a true solution though as there may well be a deeper problem afoot.
I would like to see some kind of error/fixed message from Disk Util just so I know the OS is on top of this problem. As it stands my Mac thinks everythin is A-OK.

HELP!! File system corrupted

Hi,
I got the filesystem on my LaCie Biggest Quadra 4 Tb external RAID disk suddenly corrupted and the system doesn't recognize the disk anymore, but the RAID controller does not complain about disk errors. Shortly, what happened:
- the disk is my Time Maschine disk
- I had a simulation code running over night writing output on that disk, too
- the disk was nearly full (2 Gb free)
- I found my code hanging and access to that disk rather slow, but I continued working without using that disk much
- I did the 10.5.3 update and rebooted the machine
- after boot the machine complained that the external disk is not recognized
(BTW: I don't think the upgrade was the problem. I cannot see the disk even from my laptop which I didn't upgrade yet!)
Disk utility does see the disk as a general volume, the original volume is not recognized. With disk utility I could only initialize the disk, so no chance to repair. "Data rescue" sees the volume with it's name, I haven't tried yet to see if it would recover files from that. So, now my question for the gurus over the net:
- is there any other option to repair the filesystem, I don't think I have an issue with the disk itself, as the RAID controller should complain about that.
- if the only option is to recover the files to a different disk, does it make a sense to recover the time machine file structure? That structure is overfilled with hard links that I don't believe will get recovered correctly. Is there a chance to make recovered or copied time machine backups work again on a different disk?
- how could it come that the fs got corrupted such that the disk isn't recognized anymore as a HFS+ volume?
Any help will be greatly appreciated,
Thanks,
Thomas

Just in case someone else gets to this topic:
I found out that the partition table got corrupted. No plan how that happened, the RAID seems ok. I was able to adjust that problem with a free program called testdisk (http://www.cgsecurity.org/wiki/TestDisk). After that the volume mounted again. Disk utility found problems on the filesystem which I repaired. I have a 50 Gbyte image of my powerbook disk on that filesystem which mounts if I skip verification, but fails verification. So, the filesystem got really corrupted, but at least I could mount it again and save the possible.
Thomas

File System Corrupted - Now /var/lib/pacman messed up

My root partition managed to get corrupted, fsck fixed things for the most part. The main long lasting problem seems to be in /var/lib/pacman. A bunch of the files from extra and a few from community are now missing. When I tried to do a pacman -Syu it updated a few things but also gave a long list of errors since it couldn't find the desc files:
error: could not open file /var/lib/pacman/extra//a2ps-4.13c-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//aalib-1.4rc5-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//abcde-2.3.3-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//abcm2ps-4.12.30-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//abiword-2.4.6-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//abiword-plugins-2.4.6-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//abook-0.5.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//abuse-0.7.0-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//acct-6.3.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//achessclock-0.9.2b-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//acidrip-0.14-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//acpi-0.09-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//acpid-1.0.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//acroread-8.1.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//adns-1.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//adzapper-20070317-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//afterstep-2.2.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//agg-2.5-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//aide-0.13.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//aiksaurus-1.2.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//akode-2.0.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alacarte-0.11.3-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//allegro-4.2.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alltray-0.69-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alsa-lib-1.0.14-5/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alsa-oss-1.0.14-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alsa-utils-1.0.14-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alsaplayer-0.99.79-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//amarok-base-1.4.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//amarok-engine-xine-1.4.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//amule-2.1.3-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//anjuta-2.2.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//anthy-9100-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//antiword-0.37-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//antlr-2.7.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//apache-2.2.6-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//apache-ant-1.7.0-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bmp-wma-0.1.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bmpx-0.40.13-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bochs-2.3.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bogofilter-1.1.5-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bomberclone-0.11.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bonnie++-1.03a-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//boost-1.34.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bootchart-0.9-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//brltty-3.7.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bs-2.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bug-buddy-2.20.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bumprace-1.5.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bungmeter-2.0.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bzflag-2.0.8-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//bzr-0.90-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//c-ares-1.4.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cabextract-1.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cairo-1.4.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cairo-perl-1.041-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cairomm-1.4.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//came-1.9-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//camsource-0.7.0-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//capi4hylafax-010300-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//castle-combat-0.7.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//catdoc-0.94.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ccache-2.4-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ccaudio-1.2.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cccp-0.9-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ccmalloc-0.4.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ccrtp-1.5.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ccscript3-1.1.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdargs-1.33-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdcd-0.6.6-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cddb_get-2.27-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdrdao-1.2.2-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdrkit-1.1.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdtool-2.1.8-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdw-0.2.4-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cgoban2-2.6.12-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//checkpassword-0.90-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//chemtool-1.6.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//chkrootkit-0.47-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//chmlib-0.39-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cinepaint-0.22.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//circuslinux-1.0.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cl-ppcre-1.3.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cl-ppmx-1.0.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cl-sdraw-1.0.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//clamav-0.91.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//clanlib-0.8.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//claws-mail-3.0.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//claws-mail-extra-plugins-3.0.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//clisp-2.41-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cln-1.1.13-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//clustalw-1.83-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//clusterit-2.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cmake-2.4.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cmatrix-1.2a-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cmt-1.15-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cmucl-19d-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cmus-2.2.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//codecs-20061022-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cogito-0.18.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//colortail-0.3.0-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//commoncpp2-1.5.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//compface-1.5.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//compositeproto-0.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//conky-1.4.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//connmon-0.13.0-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//convmv-1.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//corewars-0.9.13-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//courier-authlib-0.59.3-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//courier-imap-4.1.3-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//courier-maildrop-2.0.4-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//courier-mta-0.55.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cowsay-3.03-5/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cplay-1.49-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cpudyn-1.0.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cpufreqd-2.2.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cpufrequtils-002-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//crimson-0.5.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//crypto++-5.5.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cscope-15.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cssed-0.4.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//csup-20060318-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ctags-5.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//culmus-0.101-7/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cups-1.3.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cups-pdf-2.4.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//curl-7.17.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cvs-1.11.22-6/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cvsfs-1.1.9-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cvsps-2.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cvsup-16.1h-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cyrus-sasl-plugins-2.1.22-6/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//d4x-2.5.7.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//dailystrips-1.0.28-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//damageproto-1.1.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//dvgrab-2.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//easysock-0.3.0-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//easytag-2.1.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eboard-1.0.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ecasound-2.4.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ecl-0.9i-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eclipse-3.2.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eclipse-cdt-3.1.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eclipse-ecj-3.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ed2k-gtk-gui-0.6.4-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//edb-1.0.5-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eel-2.20.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//efax-0.9-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eject-2.1.5-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ekiga-2.0.11-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//elinks-0.11.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//emacs-22.1-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//emboss-3.0.0-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//emelfm2-0.3.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//emerald-0.2.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//emerald-themes-0.2.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//emovix-0.9.0-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//enblend-3.0-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//enchant-1.3.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//enigma-1.04-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//enlightenment-0.16.8.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//enscript-1.6.4-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eog-2.20.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//epdfview-0.1.6-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//epic4-2.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//epiphany-2.20.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//epiphany-extensions-2.20.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//epplet-base-0.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eric-3.9.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//erlang-R11B.5-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//esd-0.2.38-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eterm-0.9.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//etherape-0.9.7-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ethstatus-0.4.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ethtool-6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//ettercap-NG_0.7.3-6/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eventlog-0.2.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evieext-1.0.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evilwm-1.0.0-1.1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evince-2.20.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evms-2.5.5-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evolution-2.12.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evolution-data-server-1.12.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evolution-exchange-2.12.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evolution-sharp-0.14.0.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//exim-4.68-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//exiv2-0.14-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//exo-0.3.2-5/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//expat-2.0.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//vips-7.12.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//wipe-2.2.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//guichan-0.7.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//guifications-2.14-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//gutenpy-0.3.0-5/desc: No such file or directory
error: could not open file /var/lib/pacman/community//gwenhywfar-2.6.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//gwget-0.99-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hacburn-0.3.5-3/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hal-cups-utils-0.6.13-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//happs-0.8.4-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hardinfo-0.4.2.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hardware-monitor-1.4-4/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hashcash-1.22-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//haskell-binary-0.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//haskell-x11-1.2.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//haskell-x11-extras-0.4-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hatari-0.95-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//haxml-1.13.2-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hddtemp-0.3.beta15.36-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hearse-1.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hedgewars-0.9.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//helixplayer-1.0.8-4/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hevea-1.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hex-a-hop-20070705-6/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hexter-0.6.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hgsvn-0.1.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//hlist-darcs-20070629-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//homebank-3.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//klogwatch-2.0.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//ltris-1.0.11-3/desc: No such file or directory
error: could not open file /var/lib/pacman/community//man2texi-0.01-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//moinmoin-1.5.8-3/desc: No such file or directory
error: could not open file /var/lib/pacman/community//moreutils-svn-81-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//mpdcon-1.1.99-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//nautilus-actions-1.4.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//openthreads-1.5-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-crypt-cbc-2.22-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-text-charwidth-0.04-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-text-markdown-1.0.3-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-universal-can-1.12-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-universal-require-0.11-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-www-mechanize-1.30-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//perl-www-sms-0.09-3/desc: No such file or directory
error: could not open file /var/lib/pacman/community//ruby-gtksourceview-0.16.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//smplayer-0.5.21-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//sofia-sip-1.12.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//texlive-formatsextra-doc-2007.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//texlive-games-doc-2007.1-2/desc: No such file or directory
error: could not open file /var/lib/pacman/community//weechat-cvs-20070805-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//xfce4-xkb-plugin-svn-3163-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//xfmedia-svn-26105-1/desc: No such file or directory
error: could not open file /var/lib/pacman/community//xfwm4-svn-26127-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//aalib-1.4rc5-4/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//acpid-1.0.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//agg-2.5-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alltray-0.69-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alsa-lib-1.0.14-5/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//alsa-utils-1.0.14-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//amarok-base-1.4.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//amarok-engine-xine-1.4.7-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cabextract-1.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cairo-1.4.10-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cairo-perl-1.041-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdrdao-1.2.2-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cdrkit-1.1.6-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//chmlib-0.39-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//codecs-20061022-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//compositeproto-0.4-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cpudyn-1.0.1-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cpufrequtils-002-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cups-1.3.3-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//curl-7.17.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cvs-1.11.22-6/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cvsup-16.1h-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//cyrus-sasl-plugins-2.1.22-6/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//damageproto-1.1.0-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//eject-2.1.5-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//esd-0.2.38-3/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//evieext-1.0.2-1/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//exiv2-0.14-2/desc: No such file or directory
error: could not open file /var/lib/pacman/extra//expat-2.0.1-1/desc: No such file or directory
As a test I tried doing a pacman -S to reinstall one of those packages, and it gave the same error as well as complaining about the missing depends file. After I told it to install the already up to date package pacman kept saying that the package was corrupted. Any way to fix this short of doing a reinstall?

These files have to do with the pacman database of all packages, not of installed packages (which are in /var/lib/pacman/local). I would suggest trying 'pacman -Syy' to clean that up, and if you still have the same sorts of errors afterwards that would suggest quite annoying disk corruption.

Reinstalling Tiger After File System Corruption

One of my users inadvertantly deleted the /var directory on my Tiger system. The system will now only boot to an sh prompt and no files are accessible.
I need to re-install the OS. The re-installation docs describe methods that are accessible from Mac OS. What I need is to perform a clean install. On Linux or Windows this would be accomplished by booting from the installation media and performing a clean install.
What is the equivalent process for Macs? Can I boot from the cdrom? I can't even get the DVD ROM drive to open.

Hi hutzut,
Yes, you boot from Tiger Install DVD, choose which installation (in your case, I would choose Erase & Install, not Archive & Install), choose then also Custom Install if you don't want all drivers, languages etc installed.
It's a very easy and fast process, no need to know anything about computers.
To open the CD drive:
--> restart with the mouse button depressed.
I don't know what is a "sh prompt", but you may want to remember also the Terminal commands to open it:
drutil tray open
drutil tray close
drutil tray eject
and restart from the Install DVD (already in the drive), by keeping the C key depressed.
Good luck!
Axl
239/2685

Recurrent corrupt file system of internal hard disc

Hi,
on my MacBook Pro Late 08 I get some file system corruption over and over again. Normaly I would guess having a defect hard disc but I have already tried three different discs. The problem always comes back.
I recognize the corruption by having multiple crashes of several applications (Firefox, iPhoto, iWorks, ....) having some exception type of EXCBADACCESS. This type seams to indicated that something cannot be read correctly anymore. After repairing the disk everything works fine again.
Is it normal that MacOS filesystem is not that stable and gets corrupt from time to time? I cannot find out any reproduction pattern so far.

I have exchanged the original disc to a larger 500GB/7200 2 month after getting the new MacBook. To narrow down the problem I switched to a 500GB/5400 another 6 month later. I always moved with a SuperDuper Backup from disk to another. My disc usage is about 90%.
I tent do believe it has something to do with the power management of the Mac. Between a healthy file system and a corrupt one is always one or more system sleeps.
But the output of the disk utility is also weird. Three successive runs state at the end:
1)
Invalid node structure
The volume MacBookPro internal could not be verified completely.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
2)
The volume MacBookPro internal was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
3)
The volume MacBookPro internal appears to be OK.

Firefox corrupts windows file system

Since upgrading to Firefox 32.0, my Acronis Backup stops with the error message
"Backup of file or folder c:\Users\Robert\AppData\Local\Mozilla\Firefox\Profiles\<Firefox.Profile>\Cache" failed. File or folder does not exists."
The problem no longer occurs after running chkdsk which implies a file system corruption, but it re-occurs when opening and closing Firefox.
Note that I use hibernation (i.e. I open and close the browser, hibernate, wake up and then note the file system corruption)

Yes, I have checked that the folder is not explicitly specified. Also, after running chkdsk, the backup runs successfully, even if the folder does not exist.
I have run some more tests, and am now very confident that this is indeed a bug.
Reproduction:
1) Start & Close Firefox
2) Run Backup --> Error
3) Create an empty folder named "Cache"
4) Run Backup --> OK
5) Start & Close Firefox --> Folder "Cache" is renamed to "Cache.Trash<Number>"
6) Run Backup -> Error
repeat as desired
I have found a temporary fix: When I remove the delete permission on my manually created "Cache" folder, Firefox does create a "Cache.Trash<Number>" folder, but cannot delete the Cache folder. The backup will run in this case.

SD File Transfer Corrupts

Hello! Everytime I try and put a significant amount of music on my SD the file system corrupts. Then if I do error recovery under disk tools I lose most of the music. I'm blaming the blackberry at the moment. I don't think it happens when i use a card reader, until I put the card in the blackberry. I've tried this on 2 pc's running windows 7.

What version of Final Cut 6 are you running?
-paul.

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

A corruption was discovered in the file system structure on volume Windows

This morning, turned on the laptop and have several instances of this error in the event viewer. Here are the details:
<script>// function f(e){ if (e.className=="ci"){if (e.children(0).innerText.indexOf("\n")>0) fix(e,"cb");} if (e.className=="di"){if (e.children(0).innerText.indexOf("\n")>0) fix(e,"db");} e.id=""; } function fix(e,cl){ e.className=cl; e.style.display="block"; j=e.parentElement.children(0); j.className="c"; k=j.children(0); k.style.visibility="visible"; k.href="#"; } function ch(e){ mark=e.children(0).children(0); if (mark.innerText=="+"){ mark.innerText="-"; for (var i=1;i<e.children.length;i++) e.children(i).style.display="block"; } else if (mark.innerText=="-"){ mark.innerText="+"; for (var i=1;i<e.children.length;i++) e.children(i).style.display="none"; }} function ch2(e){ mark=e.children(0).children(0); contents=e.children(1); if (mark.innerText=="+"){ mark.innerText="-"; if (contents.className=="db"||contents.className=="cb") contents.style.display="block"; else contents.style.display="inline"; } else if (mark.innerText=="-"){ mark.innerText="+"; contents.style.display="none"; }} function cl(){ e=window.event.srcElement; if (e.className!="c"){e=e.parentElement;if (e.className!="c"){return;}} e=e.parentElement; if (e.className=="e") ch(e); if (e.className=="k") ch2(e); } function ex(){} function h(){window.status=" ";} document.onclick=cl; // </script>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" Guid=" />
<EventID>55</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-12-26T14:26:46.034431300Z" />
<EventRecordID>4751</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="196" />
<Channel>System</Channel>
<Computer>
<Security UserID
</System>
- <EventData>
<Data Name="DriveName">Windows</Data>
<Data Name="DeviceName">\Device\HarddiskVolumeShadowCopy5</Data>
<Data Name="CorruptionState">0x0</Data>
<Data Name="HeaderFlags">0x2</Data>
<Data Name="Severity">Normal</Data>
<Data Name="Origin">File System Driver</Data>
<Data Name="Verb">Force Proactive Scan</Data>
<Data Name="Description">The exact nature of the corruption is unknown. The file system structures need to be scanned online.</Data>
<Data Name="Signature">0xe2b3f0fb</Data>
<Data Name="Outcome">Pseudo Verb</Data>
<Data Name="SampleLength">0</Data>
<Data Name="SampleData" />
<Data Name="SourceFile">0x17</Data>
<Data Name="SourceLine">193</Data>
<Data Name="SourceTag">137</Data>
<Data Name="CallStack">Ntfs+0xd88db, Ntfs+0xc0988, Ntfs+0xec781, Ntfs+0xbbef2, Ntfs+0xbc5e3, Ntfs+0xf50bb, Ntfs+0xf007d, Ntfs+0xefd53, Ntfs+0xeff5a, fltmgr+0x2d1f6, fltmgr+0x2d51b, fltmgr+0x68dc, fltmgr+0x8e10, mfehidk+0x60698, mfehidk+0x61676, mfehidk+0x61a9e, mfehidk+0x62b06, fltmgr+0x228a, fltmgr+0x37bc, fltmgr+0x192e, fltmgr+0x109e, ntoskrnl+0x3c8784, ntoskrnl+0x3eec10, ntoskrnl+0x6469f, ntoskrnl+0x433376, ntoskrnl+0x118ac4, ntoskrnl+0x136925, ntoskrnl+0xfee70, ntoskrnl+0x1557c6</Data>
</EventData>
</Event>

@shl1024 ,
Hello and thank you for posting back with the screen shot.
Now if you can boot into your system and get to the desktop. Back up all your files you do not want to loose.
Once this is done. You will want to enter the system BIOS. You should be able to access the BIOS by tapping the F10 key as soon as you see the HP welcome screen. Once you are in the BIOS you will want to run a hard drive test.
Testing a Hard Disk from the BIOS
You will want to do this to make sure the hard drive is still in good shape. If it comes up with a bunch of issues in this test. Replace.
If not run other hard drive tests.
HP Notebook PCs - Testing a Hard Disk using the Built in Self Test
Now if this finds issues then if you have everything backed up you may be able to run the Windows system recovery to put it back to the way it was out of the box.
You may just ran into an issue with corrupted data in the system file and the system is unable to read.
Here is a link to help you with the Windows System Recovery.
Performing an HP system recovery (Windows 8)
Let me know how things go and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

_NTFS - File system corrupt

Similar Messages

Maybe you are looking for