NTFS issue ..urgent
hey there ... i tried to install a third party app to have my mac r\w over NTFS formatted hard drives..the app was very lam so i removed it, after that the mac dosent read any NTFS drives i connect to it.. help pls,
N.B: i didn't back up my system yet with time machine
Download Pacifist from CharlesSoft. Among its talents, it will allow you to inspect an installer *before* you get where you are now.
Launch Pacifist
Drag and drop the installer for that enhanced NTFS package on Pacifist.
You will now see the installation hierarchy:
So, if you expand folders:
System
Library
Extensions
or
System
Library
LaunchAgents (or LaunchDaemons)
This is a tell-tale (and not surprising) that one or more kernel extensions was installed to over-ride the default ML NTFS behavior. The second category starts one or more processes at boot to support the application functionality. The native ML Apple NTFS kernel extension is named ntfs.kext.
I have used Pacifist as a roadmap for cleaning up application cruft that was not removed by dragging the application to the trash, or as a determinant to gauge whether I wanted to risk kernel extension intrusion.
I would temporarily move all files listed by Pacifist for that rogue NTFS r/w application into a holding folder. Reboot the system, and evaluate if normal operation returned. If so, delete it.
Similar Messages
-
Hai frnds
I have got a new dell studio 15 laptop.iam much interested in oracle applications and for the purpose of learning oracle applications i got it.when i tried to install redhat enterprise linux 4 replacing windows xp on my machine it throws the error message as driver not found and the installation does not proceed.when i asked the computer dealers they said that i have to go for some newer rhel version for installing linux in my laptop since its a new brand.
before few days i tried to install oracle applications 11.5.10.2 on rhel 5 but i got a lot of errors and the oracle forums advised me to go for rhel 4 for installing oracle applications 11.5.10.2.now iam confused and dont know wat to do .
my aim is install oracle applications 11.5.10.2 on some newer version other than rhel 4 which supports my dell laptop
i want to know whether installation of oracle applications 11.5.10.2 is possible on rhel 8 or rhel 9.will the installation goes properly.
Thanks and Regards
Parithi.A.Hi,
Please see your other thread.
install issue -urgent
install issue -urgent
Regards,
Hussein -
SQL Query Group By Issues - Urgent
I currently have an issue writing a pl\sql report, I can get part of the way to the results I want but the group by clause is causing problems, because I have to add more columns to the group by, dispersing the figures further, I have tried it with coalesce for each of the task types but I still get the same results, I am getting close to the results I need but not quite there yet. I would really appreciate it if someone could take at look at this for me as it is an urgent requirement.
The report is based on the tables similar to the following:
TASKS, ORGANISATIONS, POSITIONS
A position is a member of an organisation.
A task has a position assigned to it.
The SQL for the tables and to insert the data that would produce the report is detailed below:
CREATE TABLE TASKS
( TASK_ID NUMBER NOT NULL ENABLE,
TASK_TYPE VARCHAR2 (15 BYTE) NOT NULL ENABLE,
STATUS VARCHAR2 (15 BYTE) NOT NULL ENABLE,
POS_ID NUMBER NOT NULL ENABLE,
CONSTRAINT TASKS_PK PRIMARY KEY (TASK_ID));
CREATE TABLE ORGANISATIONS
( ORG_ID NUMBER NOT NULL ENABLE,
ORG_NAME VARCHAR2 (15 BYTE) NOT NULL ENABLE,
CONSTRAINT ORGANISATIONS_PK PRIMARY KEY (ORG_ID));
CREATE TABLE POSITIONS
( POS_ID NUMBER NOT NULL ENABLE,
POS_NAME VARCHAR2 (25 BYTE) NOT NULL ENABLE,
ORG_ID NUMBER NOT NULL ENABLE,
CONSTRAINT POSITIONS_PK PRIMARY KEY (POS_ID));
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (1,'ABC');
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (2,'DEF');
INSERT INTO ORGANISATIONS (ORG_ID, ORG_NAME) VALUES (3,'EFG');
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (1,'ABC-1', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (3,'ABC-2', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (2,'ABC-3', 1);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (5,'DEF-2', 2);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (4,'DEF-1', 2);
INSERT INTO POSITIONS (POS_ID, POS_NAME, ORG_ID) VALUES (7,'EFG-1', 3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (12,'TASK_TYPE_3','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (11,'TASK_TYPE_2','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (10,'TASK_TYPE_2','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (9,'TASK_TYPE_2','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (8,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (7,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (6,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (5,'TASK_TYPE_1','LIVE',3);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (4,'TASK_TYPE_1','LIVE',2);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (3,'TASK_TYPE_3','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (2,'TASK_TYPE_1','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (1,'TASK_TYPE_1','LIVE',1);
INSERT INTO TASKS (TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (13,'TASK_TYPE_3','LIVE',3);
The report should detail the following information based on the information in the tables:
1st Column
Organisation
ABC
DEF
EFG
2nd Column
No. of Positions in Organsiation
3
2
1
With total of the number of people in all of the organisation 6
3rd Column
Number of tasks assigned to the organisation of task type1
2
1
4
4th Column
Number of tasks assigned to the organisation of task type 2
0
2
1
5th Column
Number of tasks assigned to the organisation of task type 3
1
0
2
Total no of tasks assigned to the Organisation
3
3
7
Message was edited by:
Suzy_r_82
Message was edited by:
Suzy_r_82Hi,
Apologies, my insert statements where incorrect, if you try the data below instead it should give you output I was expecting
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (1,'TASK_TYPE_1', 'LIVE',1);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (2,'TASK_TYPE_1', 'LIVE',2);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (3,'TASK_TYPE_1', 'LIVE',5);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (4,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (5,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (6,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (7,'TASK_TYPE_1', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (8,'TASK_TYPE_2', 'LIVE',4);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (9,'TASK_TYPE_2', 'LIVE',5);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (10,'TASK_TYPE_3', 'LIVE',1);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (11,'TASK_TYPE_3', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (12,'TASK_TYPE_2', 'LIVE',7);
INSERT INTO TASKS( TASK_ID, TASK_TYPE, STATUS, POS_ID) VALUES (13,'TASK_TYPE_3', 'LIVE',7);
The results I would like are
ORG No. of Pos No of Task No of Task No of Task Total no
In Org Type1 for Type2 for Type3 for of Tasks
Org Org Org for Org
ABC 3 2 0 1 3
DEF 2 1 2 0 3
EFG 1 4 1 2 7
Total 6The results I get are multiple lines for each organisation, I would like to rollup these lines so I can have one line per organisation.
Hope this helps a bit more, I appreciate the help, let me know if you need more information
Thanks
Suzy -
0P_FYEAR issue - Urgent - Please help
Hi,
We are developing six new BCS queries. We have already have about 30 reports.
1. We are using the Fiscal Year variable (0FISCYEAR) - 0P_FYEAR in most of the queries. In the new reports, particularly in one query, the previous year is not working with -1 offset value. but, the same variable is working in other new reports for previous year. Please help how to rectify the issue.
2. I have started trying many options in QA environment and found that there was a option to choose CONSTANT SELECTION in the 0FISCYEAR. So, I tried to select the Constant selection and found that the PREVIOUS YEAR IS WORKING for the query, for which earlier it was not working. Now, my another issue is that previous year is not working for all other queries which we have used the 0P_FYEAR as variable.
Since I have tried this in QA, all the reports in QA are not working for previuos year. Please advise urgently to correct the same.
Thanks & Regards,Hi ,
Have you used Fiscal Yaer variant in your query?
When you use these variables you should restrict querieswith correct fiscal yaer Variant.
Jaya -
FCS2 "Something Happened" message at load, other upgrade issues URGENT
Final cut studio has been giving me a "Something Happened" message every time I load it since after I upgraded it. What is this?? It seemed at the time that the upgrade to FCP Studio 2 installation went well...no weird messages or anything.
I did the upgrade at the end of last year and Ive been using the software OK with three exceptions:
1.- The FCP "Something Happened" message always appears when the OS loads...
2.- The new COMPRESSOR wont load at all....ever! (I installed ALL upgrades frpom the web and ALSO downloaded the compressor upgrade (from Nov 07) and installed it "by hand", but to no avail.
4.- FCP cannot render exotic effects (For example the ones that work in Motion)Final Cut pro asks me to upgrade my graphics card from the old 60 mb NVIDIA GEFORCE that came with the first system to a larger one.
I just bought it through the net and it should be here in a couple of weeks. (I am in Nicaragua, Central America).
I dont know what to do about the compressor (I need it urgently but dont know how to uninstall and reinstall ONLY compressor).
My machine specs are
Model POWER MAC 7.2
CPU Power PC 970 (2.2)
2 CPU Units
Level 2 cache 512 KB
Memory 4 GB
Bus speed 1 GHZ
Start ROM version 5.1.5 F0
Serial G8429CVLPXDDear Jerry
Im very afraid of doing a full reinstall for a couple of reasons:
1.-We dont have a reliable and FCP-savy MAC techie in Nicaragua.
2.-I am not 100% sure I have ALL of the disks for all of the previous versions of the software
3.- There are a lot of other things on that drive that I am afraid of losing.
Do you have any other ideas??
Do you think issues will be resolved when the new video card comes??
Is there any way of installing (In the meantime) only the previous version of COMPRESSOR??
Thanks for any help-
Carlos
Tanks -
[JPF/NetUI]NetUI tree issue---Urgent
Gurus, :)
I had an issue when i used the NetUI true in my project(on Weblogic10gR3), when i keep clicking the netUI tree,
i got a message in the jsp: PageFlow /Controller.jpf: Could not find exception handler method <b>handleException</b>.; but actually i have an exception handler for the SocketException called handleSocketException, and there is also an exception handler method called handleException. weird weird.. ;)
In the Log, there was an exception thrown:
com.cup.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:333)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.cup.filter.LoginFilter.doFilter(LoginFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
the class marked as bold is a filter in which i checked if the netUI tree is emplty, and the logic in the LoginFilter.java:50 is only : chain.doFilter(request, response);
it seems that a socket exception is thrown with no reason, is it a NetUI issue????
It's really urgent, could someone help me with that? ;)
Thanks a lot!!!!!
Edited by: Xu Wen on Sep 3, 2009 8:26 PM
Edited by: Xu Wen on Sep 3, 2009 10:23 PM
Edited by: Xu Wen on Sep 3, 2009 11:17 PMdeepak,
Sorry for replying your post so late as i am just back from my vacation. the entire thing is as follows:
2009-09-16 14:30:45,546 ERROR [[ACTIVE] ExecuteThread: '21' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Software caused connection abort: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2009-09-16 14:30:48,000 ERROR [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2009-09-16 14:30:48,921 ERROR [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Software caused connection abort: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
2009-09-16 14:30:49,062 ERROR [[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'] com.cup.soa.catweb.service.jpf.ServiceController - Service Management SocketError
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkTransfer(ChunkOutput.java:525)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:504)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:382)
at weblogic.servlet.internal.CharsetChunkOutput.flush(CharsetChunkOutput.java:249)
at weblogic.servlet.internal.ChunkOutput.checkForFlush(ChunkOutput.java:469)
at weblogic.servlet.internal.CharsetChunkOutput.write(CharsetChunkOutput.java:326)
at weblogic.servlet.internal.CharsetChunkOutput.print(CharsetChunkOutput.java:233)
at weblogic.servlet.internal.ChunkOutputWrapper.print(ChunkOutputWrapper.java:153)
at weblogic.servlet.jsp.JspWriterImpl.print(JspWriterImpl.java:176)
at org.apache.beehive.netui.tags.AbstractSimpleTag.write(AbstractSimpleTag.java:152)
at org.apache.beehive.netui.tags.tree.Tree.doTag(Tree.java:936)
at jsp_servlet._com._cup._soa._catweb._service._jpf.__index._jspService(__index.java:338)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:385)
at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:503)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:251)
at org.apache.beehive.netui.pageflow.internal.DefaultForwardRedirectHandler.forward(DefaultForwardRedirectHandler.java:128)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.doForward(PageFlowRequestProcessor.java:1801)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processForwardConfig(PageFlowRequestProcessor.java:1674)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.cup.soa.catweb.filter.LoginFilter.doFilter(LoginFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Still the message saying handleException is not found . (Weird)
Any idea what's wrong??
Thanks a lot
Regards,
Wen
Edited by: Xu Wen on Sep 21, 2009 2:00 AM -
hi ,
I have the following setup.
* I have a network shared drive on which i installed Oracle 9.0.1.1 Enterprise DB. The shared drive is on a different machine, but same NT network domain. The installation went smooth without any issues. But, when i tried starting the listener i'm getting the following error.
* The machine on which the shared folder is, has Linux installed on it.
Failed to start service, error 65.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 65: Unknown error
Can some one help me on this ?
This is a very urgent need.
thanks in advance,
SriramIf you are using windows 2000, then you may want to check the account which is being used to start the listener.
You can do this from the services window...double-click the TNS service and check the Log On tab to see who it is starting the service as...you may need to specify using "This Account".
Also, check the SQLNET.ORA file to see if there is a line that reads:
sqlnet.authentication_services=(NTS)
If so, try commenting it out.
This solved my issue using Oracle 8.1.7. -
WRT610N NAS NTFS issue for deleting directory
Dear all,
I got one issue with the WRT610N and the NAS feature. This is really a nightmare. I have been looking everywhere, I found people with the same issue but never find any solution.
I am running Vista on a laptop connected to the WRT610N via the 802.11n link but the issue is not here.
I have a hard drive of 40GB (but same issue exist with another drive of 500GB) plug to the USB port. I can read all file without any issue. I can also add file without any problem. The problem come when I try to delete some directory. In this case I got the an 0x8007045D Error indicating that I need to have the right permission for doing this. However I do not have any issue in deleting files. In case I delete all files from a directory I can't delete the directory without the error. I map the drive to the windows explorer with the admin account which give read and write access.
Without this fix the NAS feature can only be used in read only!
Could you let me know if you had the same issue? If you solve this could you post the way to fix it? or maybe am i doing something wrong?
Your help will be very appreciatated.
Regards,
PS: I am also running the latest firmware (v1.00.02 B10). The problem was also present with previous software.
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 03-22-2009 10:28 AMI have been in contact with the on-line linksys support last week-end. They said that I should have a feedback of the issue by e-mail. I received the e-mail today from lynksys UK support. They asked for more details of the issue and then I just provided them more details of the issue including screenshots. I hope this will be fixed otherwise the NAS feature is just useless for me. I use the NAS for automatic backup which synchronizes files and therefore delete directories when they have been delated in the source. I got similar issue when using iTunes from MP3 database. I guess that the application try sometime to create directories when adding photo album to MP3 database. So basically a non reliable NAS is just useless. I found the WRT610N very attractive in terms of features, i.e. everything I need in single box but very disappointed of the various issue I had on the router regarding the DLNA issue, at least with the previous firmware.
Having the hard drive in FAT32 instead of NTFS is also not a good option. It took 8 hours to copy about 400 GB of data on my western digital 2.5" (500 GB drive) when the drive is format as NTFS and attached to my PC. When using FAT32 it took 5 to 5 days! FAT32 is very old and not reliable format (no journal file). NTFS is said as supported in other linksys product so I guess that it shoud be possible to have it on this prodcut. It sure that for a long time NTFS support on linux was not always easy for write access but I think that things have changed since that time. In case NTFS would not be possible they should provide other reliable and fast drive format such as Linux EXT2/EXT3 formant. However, I tried those format and it do not work. That is quite strange since this is a native linux format and the router is probably running on linux system.
For your information, I also had some disk corruption when I did some delation of files/directory with a FAT32 drive. It was less reccurent than NTFS but still not reliable. However I did not try the latest firmware with a FAT32 drive.
I will let you know when I will have feedback. If anybody has similar issue please just mention it here, at least we and linksys can be aware of the situation. Linksys should also take this opportunity to listen to their customers and enhance their product. I really believe that this product has been put on the market without the proper validation and I am suprise that it takes so many months to have updated firmwares.We can understand that bug could exist, but they should fixe it. -
Pro Tools/Logic bouncing issue URGENT
I have an urgent Logic/Pro Tools question. I've asked several people and searched online but I can't find the problem. For some reason, my bounced Logic files come out as 5 mono tracks in Pro Tools.. but they're bounced as interleaved in Logic. I'm not sure what the issue is.. I have a deadline for this track (Jan 5th) help is REALLY appreciated. Thanks in advance
Quality shouldn't differ between interleaved and separate right/left mono files.
If you want Logic to work like Protools and be more compatible with PT, go into Preferences/Audio and uncheck "Universal Track Mode". Now Logic will use separate files for left/right.
Most DAWs can import interleaved files because they also use them as the main recording option, ProTools has always stuch with single right/left files.
pancenter- -
Master with two details issue --- urgent
Hi,
This is an urgent issue. Please help solve this.
Page has one sub-tab layout region and beneath it advanced table - in advanced table region. The sub-tab region shows the master data(vo1) whereas the advanced table - in advanced table is used to display the details (vo2) and its details (vo3) data.
The relationship between 3 vos in AM is as follows:
vo1
|--------- conencted to vo2 via vl1
-----------------------------|-------------- connected to vo3 via vl2
How to set the CHILD_VIEW_ATTRIBUTE_NAME and VIEW_LINK_NAME on each of this region so that when vo1 is queried the data of vo2 and vo3 is fetched automatically and displayed?
Or is there any other way to make this haapen with the above mentioned region layout?
Appreciate your help. Thanks in advance.
Mitiksha
Edited by: Mitiksha on Sep 17, 2009 2:00 PMYou could use "New"/"BC" and create a ViewLink with the same name as the FK Assoc. If you edit the PackageModule, you should be able to see your FK link in there.
-
Memory issue-URGENT!!!!!!!!!!!!!!!!!!!!!!
hi,
I am using Oracle 10g on windows 2003 enterprise edition.
I had 4gb of RAM on my system, and now it is extended to 8gb. but oracle is taking only 4gb as before it is not getting increased.I checked this by increasing SGA to 6gb and next to 5gb, but it failed.
The memory is detected both in BIOS and OS side.
What should i now do to increase this memory usage for oracle.
Please help me resolving this issue. ITS URGENT.
Thanks In Advance.It is just a comment on the kind of thread title you have set, URGENT!!!!!!!!!!!!!!!!!!!!!! (uppercase and !!!) won't give more priority to your thread, all threads are just treated the same and they are answered on a random way and it depends on the poster availability. It is not a paid service and we all here are on a voluntary basis. If you want to have an issue replied urgently you should open a Service Request with using your Oracle Support Contract, or have a paid consultant service.
~ Madrid -
Remedy issue URGENT!! Please help
Hi All,
I am not able to login to remedy client as I'm getting the below error
*‘RPC: Miscellaneous tli error - System error (Connection refused)’*
We tried to restart the remedy process, that dont work, Getting the below SQL errorAction Request System initializing.
Starting Remedy AR System server
Also I have checked the network/firewall as there is no issues with their end.
Please anyone help me to resolve this issue.
Error while restarting the remedy process
Action Request System(R) Server Version 4.05.02 patch 1025
Copyright (c) 1991 - 2001 Remedy Corporation. All Rights reserved.
Copyright (c) 1989 - 2001 Verity, Inc. All rights reserved.
Reproduction or disassembly of embodied programs and databases prohibited.
Verity (r) and TOPIC (r) are registered trademarks of Verity, Inc.
390600 : SQL database is not available -- will retry connection (ARNOTE 590)
Notification System Server Version 4.05.02
Copyright (c) 1994 - 2001 Remedy Corporation. All Rights reserved.
110902110300- 24733: Initializing process 24733
110902110300- 24733: DISPLAY_CONFIGURATION===================================
110902110300- 24733: EXTERNAL START (-X) FALSE
110902110300- 24733: RESTART (-r) FALSE
110902110300- 24733: Check-Users: (-c) FALSE
110902110300- 24733: Debug-Level: (-d) 21
110902110300- 24733: Disable-Shared-Memory: FALSE
110902110300- 24733: Hold-Time: (-h) 2592000 seconds = 30.0 days
110902110300- 24733: Max-Users: (-u) 1000
110902110300- 24733: Notifier-Outbound-Port: 0
110902110300- 24733: Notifier-Specific-Port: 0
110902110300- 24733: Private-RPC-Socket: 0
110902110300- 24733: Private-Specific-Port: 0
110902110300- 24733: Register-With-Portmapper: FALSE
110902110300- 24733: Send-Timeout: (-t) 7
110902110300- 24733: TCD-Specific-Port: 32768
110902110300- 24733: ========================================================
110902110300- 24733: AR System server: remedy01
110902110300- 24733: AR ServerNameWithDomain: remedy01.ndc.lucent.com
110902110300- 24733: HostnameWithDomain: remedy01.ndc.lucent.com
110902110300- 24733: StartServerDaemons
Notification Send Server Version 4.05.02
Copyright (c) 1991 - 2001 Remedy Corporation. All Rights reserved.
110902110300- 24736: Initializing process 24736
110902110300- 24736: ProcessFiles: called with loginFd(0)=9 and notificationFd(1)=10
110902110300- 24736: ProcessFiles: start Notifications at offset 0.
110902110300- 24736: ProcessFiles: reopening nfyfile (new notificationFd=10)
110902110302- 24733: StartServerDaemons daemon 0 started
Action Request System(R) Mail Daemon Version 4.05.02
Copyright (c) 1991 - 2001 Remedy Corporation. All Rights reserved.
MailFileName: /usr/mail/fxbrophy
Action Request System initialization is complete.
390600 : Cannot initialize contact with SQL database (ARERR 551)
Stop server
390600 : AR System server terminated -- fatal error encountered (ARNOTE 21)
Action Request System(R) Server Version 4.05.02 patch 1025
Copyright (c) 1991 - 2001 Remedy Corporation. All Rights reserved.
Copyright (c) 1989 - 2001 Verity, Inc. All rights reserved.
Reproduction or disassembly of embodied programs and databases prohibited.
Verity (r) and TOPIC (r) are registered trademarks of Verity, Inc.
390600 : SQL database is not available -- will retry connection (ARNOTE 590)
Thanks,
SajithWhy are you posting this on the Oracle forums, shouldn't you be talking to Remedy or BMC or whoever provides support for the product?
Also this (or other public forums) is generally not the place for urgent production issues. There are paid support channels for such issues.
Anyway, a hint:
I would probably dig into the very vague "SQL database is not available" message. Does the system have details in logs? What clues does the actual/underlying error messages provide? Is the database in question actually up and reachable from the client (i.e. app server) host?
Edited by: orafad on Sep 26, 2011 2:20 PM -
NTFS issue: video files copied from Arch won´t load on other devices
Hi!
I'm having this odd issue... I'll start from zero:
I have a 1TB external HDD (usb3, iomega). It has an NTFS filesystem since it was always my Windows backup drive. Since I've buyed a Digital TV that supports video playback from external drives and almost any video format, I'm using it as a movie/etc device. Previusly I had installed Ubuntu... but since I've installed Arch, any video file that I copy to the external HDD won't work on the TV. When I try to reproduce those files copied from Arch on the TV it hags and reboot several times.
I don't know where to start. I've installed ntfs-3g-fuse package for mounting r/w without root privileges... and my user is part of "disk" and "storage" group.
Any ideas?
PD: Sorry, I'm not an english speaker... If it's not legible I'll try to write it again.Usually crash on access indicates damaged filesystem. For example drive was removed without umount-ing it.
For start you can run file system check on your drive from Windows - "chkdsk /f X:"
You also can run it as "chkdsk /f /r X:" to check for bad-blocks (though it is not so critical now days).
Keep in mind - NTFS is proprietary system so 'ntfsfix' from ntfsprogs in Linux could help sometime but do not hold you breath with it.
Better find Windows for Windows filesystem.
Or you can just recreate files system from scratch with mkntfs - all data on the drive will be lost, obviously. But you do not need windows for that.
Regards,
Eugene. -
New to Solaris, Some Samba and NTFS issues.
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/samba/log/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
passdb backend = smbpasswd
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/sfw/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/sfw/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[Series]
comment = TV Series
path = /home/Kirby/Series
public = yes
only guest = yes
writable = yes
printable = no875739 wrote:
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.I never had a need for it but I think you'll have to compile fuse ntfs-3g manually.
http://web.archiveorange.com/archive/v/u46DbWSGcIzl7pexf4hQ
>
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.You don't need to use Samba in Solaris 11 Express.
http://download.oracle.com/docs/cd/E19963-01/html/821-1448/gaynd.html#gayne -
Hi experts,
I am facing a peculiar issue with Validation Check, in Process Control.
I have done the following:
1. set the Validation Top account, in my AppSettings
2. Enable SupportsProcessManagement - in appropriate scenario
3. Manage Submission Phases is set to * - in Phase1 column - My Validation Account's submission Group is set to 1.
4. I have 4 independent Validation hierarchies, each one, having a submission group as 1, and are set in ValidationAccount, ValidationAccount2, ValidationAccount3, ValidationAccount4 respectively.
When I plot the Validation Account, in a data grid, I can see values, coming in the grid.
However, when I start Process Management, the Pass / Fail, is showing as Pass, even if there is value in the Validation Accounts
When I click on the Validation Pass / Fail icon, the Validation Report inside, shows blank - not even a Zero value - throughout the grid. As a result, the entity is able to promote to the next review level, even if Validation is not cleared.
Is there any setting, which I am missing out on, which is not showing Validation errors, whereas I can see Validation values in the Data Grid?
thanks
Never mind.. I found out the issue.. It was related to Rules and Metadata setting.
Edited by: Indraneel Mazumder on Aug 2, 2011 10:50 PMI'm also facing the same issue,may i know what changes you made in metadata.quick reply is appreciated.
Maybe you are looking for
-
I want my pop-up window to appear near the control that summons it. I've read about this on other threads, but my implementation does not work--the pop-up always appears in the same place, and its location has nothing to do with the location of the
-
Highspeed internet in my area!
I live out where the only internet available is through satelite and I'm dying for Verizon highspeed internet. There are Verizon lines down already in front of my house and about a mile down the road the prison has Fios. What could I do to get Veri
-
I just upgraded from Mavericks to Yosemite, I added a new user to my computer however it does not show up on start up. What can I do to change this?
-
Individuall shopping lists for each User - SRM-MDM 3.0
Hello everybody, I want to implement a SAP SRM-MDM scenario with SRM-MDM 3.0. The SRM-MDM 3.0 has the poissiblity to create shopping carts for every 'MDM User'. But that's not enough for our users. Is it possible to create different shopping lists fo
-
Connect Report output to third party system
Dear Techis Can we connect Report output to third party system and hw? Pls advice............