Ntfs permission not working

Hello Experts,
Good morning. Thanks in advance.
Please let me know why NTFS permission is not working in the below cases.
Case 1- Created a folder Home in DC   "C:\Home"
               Permission setEveryone group Deny
to the home folder.
When a user called test3 login to the domain and access the home folder gets the reply
Z:\ is not accessible
    Access
is denied
              It means NTFS permission is working fine.
CASE 2- Now permission sets Deny to test3 user for that Home folder.
When user test3 log in to the domain and he is able to access the Home folder how is it possible. It means NTFS permission is not working properly.
Regards
Biswajeet

Hi Biswajeet,
What happens that if the user test3 logs off then logs back on? Is he/she able to access the folder then?
I suggest you also create new folder and new accounts to test this.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

NTFS is not working in 64bit-mode

NTFS is not working in 64bit-mode but in 32bit-mode all right !!! ***?!

dont work int volume with XP and ext volume just sample NTFS file server ! I do not understand ! (((

Ntfs write not working

when i try to write to my windows partition, it says "Operation not permitted" and "Permission denied" even as root! Here's my fstab!
/dev/hda1 /mnt/windows ntfs defaults,umask=0,rw 0 0
It works fine with captive-ntfs, but not with the write ntfs i compiled in the kernel![/code]

In the present version of the NTFS utilities, it is not possible to write to NTFS partitions. DO NOT WRITE TO THE NTFS PARTITION: You risk VERY serious damage to your NTFS partition if you write to it.
For more information about NTFS utilities, see:
Linux-NTFS Project
http://linux-ntfs.sourceforge.net/misc.html
WRT: Writing to NTFS volumes, here's a quotation from the FAQ at this site:
"3.2 Can the Driver write to an NTFS volume, too?
Not really, but if you only need to copy files from Linux to Windows on a dual-boot machine, see "How to write to NTFS" below for a possible way to work around the lack of write support. For write support in Linux, read on.
There are two drivers, currently. The original driver, in 2.4 has some write code in it, but it is extremely dangerous to use it. The possibility of destroying your filesystem is very high.
The new driver, introduced in 2.5.11, has some write code, but it's very limited. The driver can overwrite existing files, but it cannot change the length, add new or delete existing files.
Adding write support will take a long time. NTFS is built like a database. Any changes you make, necessitate making changes in many places, for consistancy. Make a mistake and the filesystem will be damaged, make too many mistakes and the filesystem will be destroyed. Also, the current developers are only working on NTFS as a hobby, during their free time. If you'd like to help, please email me: [email protected]
How to write to NTFS. If you are using a dual-boot machine and just need NTFS write support to transfer files from Linux to Windows, you can instead use a Windows driver for ext2/ext3 and, while running Windows, read the files from the Linux partition instead. This way, using two read-only drivers, you can still copy files from one file system type to the other."

Folder level permission not working

Hi,
I have created a user Test_sup and assign few finance roles in BI system.I have imported these users and role to business object system and then i created an Enterprise group Financial reports and add the Sap roles as sub group and the test_sup is also member of the Financial reports parent group.Now i assigned the user test_sup on a folder called security and assigned the customized access level which i created and removed the folder inheritance.
Now when the test_sup logs in BI lauchpad he is able to see all the folders as well security folders.But i need to restrict the user by only access to security folder which mean he should only see the folder security and not all folder .
Pls let me know if i ahd made any mistake above as it is not working .

Hi,
So it mean i should alter the standard access level of Everyone.
Also i am also not able to remove Everyone and Administrator group on any folder .The tab remove is faded.
Below is the User security of my folder Security
Administrator
DB1~100/TEST_SUP
Everyone
Financial Reports_test
Pls clarify

File permission not working in my MAC OS X

I am working with a media company with about 40 nos oc MAC PCs (I-Mac & MacPro).
Also I am having MAC OS X 10.5 SVR (ULTIMATE CLIENT) and MAC OS X Server Ver-10.5.6 loaded in it.
The Server is consisting of 4 GB DDR3 RAM & 2.26 GHz Quad-Core Intel Xeon Processor.
The Server is used as File System Server and consisting of a Promise Storage of 32TB.
The Storage is used in a Centralized manner.
Previously the file and folders were working with appropriate permissions and inheritance was working properly.
Now I am having problems with the file and folder permissions.
The Root User is having Full Permission and Client Users are having Custom Permission.
But now a days I find that the files and folders created from the users side are taking their own permissions.
Rather inheritance is not getting worked porperly and the files and folders created by users are taking owner's permission.
Also I don't have idea about Quotas and ACL.
Please help me out ASAP for a quick ramady.

Hello dpalombi3,
This is done via AirPort Utility, as detailed in the following article.
About AirPort base station firmware updates
http://support.apple.com/kb/HT1218
Cheers,
Allen

Send As permission not working - Exchange 2010

Trying to allow a user to send as from a distribution list on Exchange 2010. I ran the following command:
Add-ADPermission -identity "Algentis - HR" -user mwong -AccessRights ExtendedRight -ExtendedRights "Send as"
The users gets an access denied NDR error message in Outlook (both cached and non-cached mode) as well as OWA. Here is the exact NDR:
Delivery has failed to these recipients or groups:
[email protected]
You can't send a message on behalf of this user unless you have permission to do
so. Please make sure you're sending on behalf of the correct sender, or request
the necessary permission. If the problem continues, please contact your
helpdesk.
Please help!

Try to send mail through OWA, it may work. If it is, then it's Outlook issue.
Solution: Have user update the offline address book (click Send/Receive tab, click Send/Receive groups and select Download Address Book). Better yet,
1) Close Outlook
2) Delete the offline address book folder under “C:\Users\username\AppData\Local\Microsoft\Outlook\Offline Address Books” (I assume it’s Windows 7 computer, look under C:\documents and settings\username\…. for XP computers).
3) Open Outlook and let it download new OAB.
Other Possibilities are,
1) You just gave “Send-As” permission for the user. Then, you have to wait for few hours. (you may restart Information Store to take effect the permission right away, who wants to do it?
2) User’s Outlook got bad/outdated cached contact information. Search for *.NK* files under user’s profile and delete it. Obviously Close the Outlook first before you delete the *.NK* files.
Please check this from your end & if you face any issue or have any query please let me know.
Check the below mentioned link for your reference.
http://anandthearchitect.wordpress.com/2011/07/17/exchange-2010-you-cant-send-a-message-on-behalf-of-this-user-unless-you-have-permission-to-do-so/

Dashboard level permission - not working?

Hi,
I have below Set up,
created users via weblogic console (just created users only in console) and created custom roles in weblogic EM then assigned users to the below role, after that login to presentation administration catalog page and granted dashboard level access like below and tested with each users ...but unable to see dashboards...?
the role (RoleA) mapped with below users and granted access for DashboardA only
David
Svee
the role (RoleB) mapped with below users and granted access for DashboardA only
DPka
Amit
DashboardA
DashboardB
After setting the permission to the dashboardA&B, test with each users the reports are not showing
Note: in catalog level BIConsumer set it as "No Access" then tested.i have tested with obiee11.1.1.3 to 11.1.1.6.4 no luck.. also check MOS for bug they said latency issue but i have waited for 2day but no luck?
also want to tell you one thing
Thanks
CW

Hi,
So it mean i should alter the standard access level of Everyone.
Also i am also not able to remove Everyone and Administrator group on any folder .The tab remove is faded.
Below is the User security of my folder Security
Administrator
DB1~100/TEST_SUP
Everyone
Financial Reports_test
Pls clarify

NTFS source not working

Hi all
I am creating a new NTFS source to crawl local directory,
over NTFS file system on windows 2003 server.
After creating source when i try to crawl it, it finds the list of files in the directory
but it says empty files to all, and does not index them.
My source is like this
UNC PATH \\iflmud5hp0854\shared-dir (i also tired d:/xyz/shared-dir)
iflmud5hp0854 is my machile name and SES is on same pc, i also tried localhost
Domain Name my-dmn.com
Use local display URL false
rest all fields are blank
This is my Crawler Log:
10:57:48:750 INFO     filter_0          info start crawl
10:57:48:890 ERROR     crawler_2          ACLS Error: //10.180.83.231/file/branchrate.txt
10:57:48:890 INFO     crawler_2          Processing file://localhost///10.180.83.231/file/branchrate.txt
10:57:48:890 INFO     crawler_2          EQG-30106: Empty document: file://localhost///10.180.83.231/file/branchrate.txt
Please urgently help.

Hi there
Thanks for help
I am searching on local drive so i guess the user issue should not be there also i dont have access to domain user account.
I heard somewhere like if we get encrypted ACL type of error this means problem in character encoding.
The Version i tested are 8.2 and now also on 8.4.
Regards,
Amit

Permission not working

Just added one new user to server and set permissions for one folder but they can see all folders and access them. All other users permissions are working fine but I can't see what I have done wrong .

You'll want to post a few more details here around the user and the folder settings? As a guess — there's not really enough detail on the configuration and the the users for me to be sure — the user might be gaining access to the other objects via a group identifier?

HELP grant permission not working

I have created a new user e.g. johnsmith like so
create user johnsmith profile default identified by johnsmith
default tablespace users
temporary tablespace temp
account unlock;
grant connect to johnsmith;
GRANT CREATE SESSION to johnsmith;
grant select on project to johnsmith;
grant select on v_emp_proj to johnsmith;
create synonym project for johnsmith.v_emp_proj;
first of all creating the synonym fails saying name used by existing object but ive tried to drop the synonym and it does not exist!!
then logging in as johnsmith and selecting * from project says table does not exist???
any ideas anyone? thanks

WOOHOOO ive done it, the synonym needed to be created on the johnsmith account to system.project!!!!
thanks everyone but there is 1 more problem, as access is restricted to the view i have had to query by emp_id, i do not want this visable in the view is it possible to hide the column in the output? here is the view...........
create view v_emp_proj
as SELECT ep_emp_id as EmployeeID, proj_id as ProjectID, proj_name as ProjectName,
proj_ou_id as OrgUnit, proj_planned_start_dt as Planned_Start_Date,
proj_planned_finish_dt as Planned_Finish_Date, proj_actual_start_dt as Actual_Start_Date
FROM employee_on_project, project
WHERE ep_emp_id =1;
i do not want emp_id displayed at all but i need it to query

Truecrypt 7 '--filesystem=ntfs-3g' Option Not Working

Since upgrading Truecrypt 6.3a-1 -> 7.0-1, the following command:
truecrypt --filesystem=ntfs-3g /dev/sda1 /mnt/tc
produces this error message:
Unknown option: ntfs-3g
The command has worked fine until now.
Removing the '--filesystem=ntfs-3g' option mounts the volume as W95 FAT32.
Changing '--filesystem=ntfs-3g' to '--filesystem=ntfs' does not work either.
Any ideas?

I have the exact same problem. This is very frustrating since Truecrypt is typically used on NTFS volumes...
EDIT: Bug report submitted. http://bugs.archlinux.org/task/20417
Last edited by Natanji (2010-08-09 10:52:33)

Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

What happens if you use the Share button and select Mail?
What happens when you try? I had to hold there photo there for a short period before it would load.

Please help me.ı delete mac os on my harddisk and ı format it ntfs.now ı have a mac os x install dvd but not working.ı think it is not working because of my hard disk format is ntfs.what can ı do?????

ı delete mac os x lion on my hard disk and ı format it ntfs.ı install windows xp.now ı have a mac os x snow leopard install dvd but it isn't working. ı think it's not working because of my harddisk format is ntfs.what can ı do for install mac os x ?thanks

The HD must be partitioned with GUID partition map and Mac OS extended (journalled) file system. Do not partition the drive into two. When you have a working OS X system, use Boot Camp to create the Windows partition and install Windows.
If you're trying to install Snow Leopard on a Mac that was delivered with Lion installed =
1. It may not be possible at all depending on the Mac.
2. If it is possible, it cannot be done with the retail SL disc which is 10.6.3
3. The only way it can be done is to obtain the original grey discs which would have come with the Mac if it hadn't had Lion installed in the supply chain. They will be at least 10.6.6 and more likely 10.6.7 or .8. You can try to obtain those from Apple Customer Services.
Macs which can run OS X 10.6 (courtesy of a. brody)

I just spent an hour composing a reply in a thread ("Firefox will not work with paypal"), only to see "You don't have permission" at Submit - total loss!

I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!

It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
* Open the web console below the error page by pressing Ctrl+Shift+k
* Right-click the blank area and turn on logging of the request and response bodies
* Resubmit the request by clicking the reload button
* Click the new URL that appears to open the viewer showing the headers and bodies
There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces.

Lync Meet Now not working

Hi,
I am using lync 2010 and users are unable to join online online meetings externally, getting 404 - File or directory not found when clicking on the meeting URL. On front end server i am getting below error when user initiates a meeting:
A Create Conference request sent to an Mcu was rejected. It will be retried but if this error continues to occur conferencing functionality will be affected.
Mcu: https://FrontEndFQDN:444/liveserver/datamcu/ Conference: sip:lync.test1@domain;gruu;opaque=app:conf:focus:id:9JC9TMSJ Error: otherFailure
Cause: Overloaded or incorrectly functioning MCU.
Resolution:
Ensure that the Mcu is functioning correctly.
I have checked File Share folder permissions and they are correct. Not sure if this is related but this issue came after my file share folder went down. It is now up again with correct permissions but meetings are not working.

Hi,Ali,
If above still doesn't work,please double check the file share permission to verify:
1)Configure the NTFS file security on the new folder and you grant
Read & Execute permissions to Everyone.
2)verify that the Administrators group is already granted
Full Control in NTFS security .
3)Configure the share permissions so the administrator account is granted
Full Control.
Also make sure you have restart the Web conferencing service and IIS service.
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Ntfs permission not working

Similar Messages

Maybe you are looking for