NTI Dragonburn Serial Help

I am moving to my MINI for DVD backups and was wondering if anyone knew were I could get a key/serial for NTI Dragonburn?
I've looked all over the net and couldn't find anything, maybe I'm looking in the wrong places?
I only got 2 trial DVD backups done before it locked on my asking for a key. I might just purchase the product but if there is anyone out there that has knowledge of a serial or key that I can use/get so I can continue my backups would be muchly appreciated.

I might just purchase the product but if there is anyone out there that has knowledge of a serial or key that I can use/get so I can continue my backups would be muchly appreciated.
If I were you, I wouldn't post in a public place like this that you are attempting to steal software... You should PAY for software you want to use if they charge for it.
-Doug

Similar Messages

Can't locate my Serial # help please!

just re installed my premiere elements 11 back on to my computer after a long while of not using it. have no idea where to locate my serial # to get my full version program back. help please!

wdollaz88
Did you purchase your Premiere Elements 11 Windows or Mac from Adobe?
The link that was given to you in post 1 by han-g. should contain the information that you need. Scroll down in the article to the section on "I lost my serial number or downloaded a product from Adobe". Even if you did not purchase your product from Adobe, your serial number may be there at http://www.adobe.com under My Products if your Premiere Elements 11 is registered.
We will be watching for your results.
Thank you.
ATR

Wired keyboard-number pad&right arrow keys not working-serial # help!

Hello to whomever reads/replies -
I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
Sharon

Hello sharon:
Welcome to Apple discussions.
Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
Incidentally, it appears to me that your KB is, indeed, broken.
Barry

RS485 Serial HELP for Low-level Read Queries

Hi,
I am trying to communication with some lab equipement (Ebara Turbopump) over rs485. Now I have a Blastronix 2 port RS485 PCI board connect with cabiling to the equipement. But when I try and use NI-VISA to communication, the read times out, which is not particularly useful information because I don't know what part of my query is wrong then.
Below, I've posted some images from their communication protocol, but I am very confused as to how to translate this into a Labview VI. So far I've tried using a String Constant with the example 8.1 (last image, with my slave ID: 001) but I get nothing. I've tried it in both ASCII and Hex with a carriage return at the end.
Any help is very appreciated!!

Okay, I tried creating to create the string using an u8 array, but still nothing. However, I am still very new to labview and not exactly sure how to create a proper array of u8/hex. I just created different u8 constant numbers and then fed them into the build array function and then to conversion from Byte to String and then to the Write of the Serial connection.
But how would I go about validating the cable?

Stolen Ipad - tracking by serial # -- HELP!!!

My ipad was stolen and I was told that it is possible to search for its location by serial number. Not sure if this is really possible... kind of scary that anyone could find out where youa re if they have your serial number... But in this case, it sure would be nice! Please anyone, any help would be greatly appreciated!
Thanks!

It is only possible if you set up "Find my iPad" in settings before it was taken. And it is connected to the internet and hasn't been reset. And you had set up a passcode so that no one could enter the iPad and change the settings. And someone hasn't connected your iPad to a computer and restored it to factory settings.
But if you set up "Find my iPad", then just go to iCloud.com, enter your Apple ID and Password, click on Find my iPhone, it should track it. Some police departments will use the information. Some will not.

Lost Serial, Help needed to work out what my one was!

I upgraded from Logic 7 to Logic 8, and it all worked fine.
I have recently installed the 8.02 update, but have since lost the serial. I still have the logic 7 dongle, but I cannot find the Logic 8 serial in my cupboard anywhere! Is there any way of getting the upgrade serial back?! At the moment, I can't use the logic that I legitimately paid for!!
Thanks,
Charlie.

Call AppleCare Technical Support at 1-800-APL-CARE (1-800-275-2273). You will need to provide proof of purchase, either from an Apple Store web order number, or a retail receipt.

Reading from serial , help needed

Hello, I am a student trying to develop a Labview VI that talks with TDK blue2i module (with at style commands) via serial port, just like Hyperterminal.My VI consists of a while loop, inside of that I do VISA write, then VISA read using Bytes at serial port since answers are variable in lenght. When i run the program the first loop works ok ( i send message and get the right answer ) but in the second loop i still read the fisrt answer even if send a different command.
Is there a way to make sure that buffer of the serial port is cleared after every reading?
Sounds like a timing problem, Everything works well if I run the program Step by Step
thanks

"Francesco83" ha scritto nel messaggio
news:[email protected]..
> Hello, I am a student trying to develop a Labview VI that talks with
> TDK blue2i module (with at style commands) via serial port, just like
> Hyperterminal.My VI consists of a while loop, inside of that I do VISA
> write, then VISA read using Bytes at serial port since answers are
> variable in lenght. When i run the program the first loop works ok (
> i send message and get the right answer ) but in the second loop i
> still read the fisrt answer even if send a different command.
> Is there a way to make sure that buffer of the serial port is cleared
> after every reading?
> Sounds like a timing problem, Everything works well if I run the
> progra
m Step by Step
>
> thanks
Hi!
I'm a student too, and I made a VI very similar to yours. My VI used the
serial port to communicate with a modem, exchanging Hayes commands and
answer from the modem.
- Ma sei italiano anke tu! io non ho usato la VISA, ho usato solo le
funzioni relative alla porta seriale messe in due o tre frame, non ricordo
bene.. credo venga più complicato ma funziona! se vuoi vederlo scrivimi una
mail! -
Vicio

Winproducer serial - help!

Hello!
I'm user of TV Anywhere card. I've lost somewhere CD with Winproducer 2.0CD. I have only copy but I hadn't write serial number on it... I really need because I'm making visualisations to my concert... Somebody can give me this number?...
Thanks a lot!
Best wishes from Poland
Adam

duh...
Man, I looked in that general area (I looked at the copyright info...)
Doesn't exactly stand out like the product key on Microsofts stuff...
Thanks for opening my eyes...
:D

Set Serial Help Needed

Guys,
I have a Keyspan USB to Serial adapter. Now I am trying to be able to connect to a Cisco switch via console serial cable using the Minicom utility. My problem is I don't know how to tell Minicom that my serial device is connected to /dev/ttyUSB0 or maybe it already know...
[carlos@tuna ~]$ dmesg | grep tty
console [tty0] enabled
00:06: ttyS0 at I/O 0x3f8 (irq = 5) is a 16550A
usb 5-2: Keyspan 1 port adapter converter now attached to ttyUSB0
Does anyone know how I can tell my Arch system that I have a USB to serial adapter connected to my machine?
Last edited by Carlwill (2010-03-31 16:37:41)

Carlwill wrote:My problem is I don't know how to tell Minicom that my serial device is connected to /dev/ttyUSB0 or maybe it already know...
Did you check to see if /dev/ttyUSB0 exists? If so, launch minicom with root privileges, and set the port (worikng from memory here) C-a C-z (I think) Then follow the awful menus.
May I respectful suggest you look at gtkterm as an alternative to minicom ?

Creating an ISO file from a bunch of BUP, IFO, VOB files

Hi
First, i want to apologize to all of you if my question is already answered somewhere, i did a search before.
I have a bunch of BUP, IFO, VOB files (from an entire DVD) that i would like to burn into a single .ISO file.
I am looking for the best software to do this. I would have used ImgBurn on my PC i guess... But with my iMac?
Thanks a lot for your much appreciated help!
Mopito

Mopito wrote:
if my question is already answered somewhere, i did a search before.
Yes, the question has been answered before, several times.
The only difference is that you want to create an ISO image, which usually means a raw disk image from another OS (eg, Win or Linux), although Mac OS X can attach or burn such an image.
If you want to create a DVD-Video disc image, then you must use a tool specifically designed for it, if you want to use the image to create DVDs which will play in stand-alone DVD players. That's because such DVDs require a rigid disc layout.
If you want to go commercial, you can use Toast or NTI DragonBurn. Otherwise, Burn, suggested by Alberto Ravasiomay also be a good solution (I'm not sure if it can save disc images, rather than burn them). Other solutions are
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
or, if you can handle the command line,
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
You can also have a look at
Disco
<http://discoapp.com/>
LiquidCD
<http://www.maconnect.ch/>
Both can burn DVD-Video; I'm not sure if they can save as a disc image.
J D McIninch wrote:
Start Disk Utility
DU (or hdiutil) can create an ISO image, and, if it's used to burn to DVD, the disc can be played on computer DVD drives. But it will not play on most stand-alone DVD players, because of the layout issue I mentioned above. Hence, it's not a good idea to use it to create a DVD-Video disc image.

"Medium Write Error" when trying to burn DVD

i have recently been receiving the message "medium write error" every time I try to burn a DVD in my mac book pro 13 inch It doesn't matter which program I use to burn, they all give me the same (or similar) message. I also tried booting into Windows and burning from there using ImgBrn it and it was
succeed
the program went from "preparing disk" to writing to "finishing", ejected the disk and made the usual error and it looks like it don't start writing as when i put the dvd back the dvd is still empty
I used to burn these disks perfectly well with no problems, before i install lion i don't know if this is lion problem or what
i also tried to attempt to reset the PRAM. by holding down CMD+Option+P+R while booting MBP and waiting until it chimes a second time to let go of those keys.i haven't changed anything so don't understand why the error occurs. I've bought a lens cleaner disk and ran that for 2-3 minutes and repaired permissions on the HD but that didn't work either. The drive works flawlessly reading DVDs and CDs with no problem no problems.
any one can help please ????

mortiis Empire wrote:
I also tried booting into Windows and burning from there using ImgBrn it and it was succeed the program went from "preparing disk" to writing to "finishing", ejected the disk and made the usual error and it looks like it don't start writing as when i put the dvd back the dvd is still empty
Sorry, I'm afraid I don't understand this.
It doesn't matter which program I use to burn, they all give me the same (or similar) message.
The problem is that it's not relevant if the programmes use the same burn engine (eg, iTunes and Finder). You need to test apps which do not use Apple's burn engine, eg, cdrdao, cdrecord, Burn, LiquidCD, Disco, Roxio Toast, NTI DragonBurn, etc. But, FWIW, my bet is not on a software issue.

Upgrading to DVR-110D. Any Suggestions?

I'm about to order and then install 2 DVR-110D's and would like to know of any tips or issues.
Both machines are G4's, one is a Sawtooth/450 (SP) and the other a 450 (DP).
Will these simply be plug and play? Do I need to update the firware and if so how do I go about it? What's "flashing?", saw this in another post.
Any online instructions, like the one's at PBfixit?
Lastly, I've always used Toast to burn, but don't own Toast 7 that supports dual layer. OWC offers a bundle that includes the DVR-110D, 5 DVD-R's NTI Dragonburn that supports DL. Anybody know about Dragonburn or should I just bite the bullet and upgrade my Toast?
Thanks for any help,
Tony

Will these simply be plug and play? Do I need to
update the firware and if so how do I go about it?
What's "flashing?", saw this in another post.
Tony:
Download the instruction for installing a DVD drive in you Mac from the Apple site in the do it yourself replacement from the harwdare site. Apple has a video here which I used for the G-4 Quicksilver 2002 version:
http://www.info.apple.com/usen/cip/html/g4qs/g4qs-dvddrive-cip.mov.html
They also have a step by step instruction which can be dowloaded here.
http://www.info.apple.com/usen/cip/pdf/g4/g4qd-cddvddrive.pdf
I did it and it took longer than it should have--but it was pretty simple. When I turned on the Mac it found the drive and I had to configure the Regional settings. I checked Pogue's Tiger book on Pg 426 and that solved the problem.
Everything works as it should with Tiger 10.4.5 and Toast 7.02. No firmware update needed.
Now I want to put the old Pioneer DVD-RW-104 in the second slot and would appreciate any input from those who have done with the the same type of QuickSliver Mac. My bottom slot has a 3.5 inch mounting hardware for a Zip Drive and I want a 5.25 inch housing for the old DVD R/W.
POWER MAC G-4 (933 MHz QuickSilver) Mac OS X (10.4.5) iSite

Cannot mount NTIDragonBurn_v45015_OSX

I am using eMac with OS 10.2.8. I try installing the above NTI DragonBurn but it ends up with " ........failed to mount due to error 95.(no mountable file systems)".
What do I need to do?

According to this info page:
http://ntius.com/en/us/product/dragon_burn.asp#
that version of DragonBurn (v4.5.0.15) requires Mac OS 10.4 or higher.
You'll need to find an older version of the burner program or upgrade your eMac. Finding legit 10.4 Tiger retail install disks is getting hard and expensive, so you could ask the software company if they have a older version available, or look for a freeware/shareware substitute.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

Need program to burn a dvd for iMovies.

need program to burn a dvd for iMovies.

Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
commercial
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
commercial
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
free
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are
Disco
<http://discoapp.com/>
no longer supported, but free
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple
For Terminal users:
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

NTI Dragonburn Serial Help

Similar Messages

Maybe you are looking for