NTLM authentication fails to connect using webdav on osX

We are having problems in our organization getting our macs connected via webdav using NTLM authentication.
Our structure is as follows:
Netapp/IBM nSeries gateway/filer model n6040 which is our FTP/CIFS/Webdav host.
Windows Server 2008 R2 Domain Controller with Active Directory
Windows 7, Mac osX clients (various versions).
From the windows side, we are able to connect to our filer via FTP, CIFS, and http/Webdav after we authenticate using our AD credentials.  From the Mac side, we can authenticate and connect to our filer using FTP, CIFS (using Connect to Server "smb://ourfiler.com") and through a browser using the address of http://ourfiler.com.  This type of connection using webdav works with Firefox but not using Safari or Chrome but isn't adequate enough for our users since the browser based connection is read only.  However, when we try to Connect to Server via webdav using our server address of http://ourfiler.com:80, we never get past the "Enter your name and password for the server "ourfiler.com." 
We tried a third party webdav client on our macs: Cyberduck, which also fails to connect using webdav.   We also tried a separate linux client and were able to connect without any problems.
Since authetication for webdav works on windows and linux, we're thinking there is problem with osX itself.  Has anyone else had this problem or can anyone suggest any workarounds/solutions?

Sorry for the late replies gentleman... for some reason I didn't get email alerts when you guys posted....
Anyways, yes the DC is on a different subnet and no we don't have WINS.  The way I understand it is the client will contact the master browser in it's local subnet... all the master browsers in all other subnets contacts the Domain master browser ...
and they share the server list this way... I mean it's a little more complicated than that....well to me at least...
Can you try resolving the short name with the domain controller being on another subnet and you having a different master browser in your client subnet?
What is the process the client goes thru when looking up Domain netbios name?  LIke for DNS, it's straight forward... the client looks at DNS server, then for the SRV records for the Site the client is in and get's domain controller.......   How
does this work for netbios domain name?  There is NO WINS in the environment.
Chau

Similar Messages

  • 802.1X Authentication fails when connecting to WPA Enterprise using Leopard

    I'm trying to connect to an office WiFi network with my MacBook Pro which has 10.5.1 installed.
    There are instructions on how to connect using Tiger which are very simple:
    1. Enter network name
    2. Wireless Security: WPA Enterprise
    3. Enter domain credentials for username and password fields
    4. 802.1X Configuration: Automatic
    There are at least two people here using Tiger that can connect using these instructions.
    I've tried the same thing with Leopard and keep getting an error dialog stating "802.1X Authentication has failed."
    I've also tried fiddling with the 802.1X tab under "Advanced" (I know the protocol is PEAP), but no matter what I get the same error.

    Turns out I was not authorized to use the WiFi. IT got me setup and everything works now.

  • "User authentication failed" when connecting with Visual Administrator

    Hello,
    I am having trouble making a connection to my local J2EE Engine using the Visual Administrator (VA).
    I open the VA interface and create a new connection. The default User Name is "Administrator". I put in "localhost" for host, "50004" for port and leave the Transport Layer selection to "Default".
    When I try to connect this way I get the following message:
    User authentication failed
    Next I went into Start|Settings|Control Panel|Users and Passwords  and saw that there were several ids created by the Developer Workplace (DW) installation. The ids that I see are: j2eadm,sapadmin,sapinstall and SAPServiceJ2E
    I checked all of them to see what groups they're members of and they're all at least members of "Administrators" group.
    There are also 3 new groups that must have been created by the DW installation: SAP_J2E_GlobalAdmin, SAP_J2E_LocalAdmin and SAP_LocalAdmin.
    The j2eadm id belonged to all 3 new sap groups so I changed its password to something I'd remember and then changed the connection to use that login.
    When I tried to connect thru VA using this id and the new password I still get the "User authentication failed" error message.
    Can anyone please tell me what I'm doing wrong?
    Thanks in advance for any help.
    David.

    Hi,
    During the installation the SAPINST asks for a Administrator  Password.. This password is very important.
    We had kept same passwords for all userids to start with.
    This helped reduce lot of confusion.
    Warning: if you enter the wrong password 5 times, the userid 'Administrator' gets locked.
    However there is an Emergency password recovery procedures.
    Try this link
    http://help.sap.com/saphelp_erp2004/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/frameset.htm
    Hope that helps
    Regards,
    Siddhesh

  • Anyconnect Failed to Connect using WEBVPN on IOS Router 2800 Series

    Hi All,
    Kindly need your help. I was trying to built Remote Access VPN connection on my lab environment. The component is Router 2811 with (c2800nm-advsecurityk9-mz.124-22.T5.bin), Anyconnect Client ( anyconnect-win-3.1.05160-k9.pkg ), Laptop ( Firewall and Antivirus disabled, already register webvpndomain.com into hosts file on Win32/Driver/Etc ).
    I was able to connect using anyconnect if I'm initiate connection via web (https://webvpndomain.com) and start tunnel connection SVC. I'm also able to reach my LAN and I get my private IP Address assigned by my vpn pool on the router. The problem is when I'm initiate connection to vpn directly from the computer, I mean I'm not using web (https://webvpndomain.com) and I'm just press "connect" on my anyconnect software that already installed on my Laptop the connection always fail. I get error message : Connection attempt has failed
    Here I'm also attach my router configuration, so you can see what I've done or what mistake that I've made on the configuration.
    Is anybody in here have experience this problem on deploying Remote Access VPN using webvpn and anyconnect as vpn client ?
    I'm really appreciate anybody that get into this discussion
    Best Regards,
    Nanda

    Try using webvpndomain.com/myVPNGW as host

  • Cannot push clients - Failed to connect using machine account

    After restoring SCCM from old x86 server to new x64 server I cannot install clients.
    Current version is SCCM 2007 SP2 without R2. SCCM is in mixed mode, SCCM was installed to SAME path, was successfully restored from backup using "ConfigMgr Site Repair Wizard".
    But new clients cannot be installed now.
    The following is in ccm.log:
    "---> Warning: no remote client installation account found $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=3936 (0xF60)>
    ---> Attempting to connect to administrative share '\\computername\admin$' using machine account.~ $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=3936 (0xF60)>
    ---> Failed to connect to \\computername\admin$ using machine account (1203) $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=2900 (0xB54)>"
    Account used for push install presents in "Domain Admins" group and can reach this share from SCCM server using explorer or file manager.
    Firewall service is stopped and disabled on target computers.
    Searching through logs I was confused by this: "Warning: no remote client installation account found". It's impossible because account is present and set coreectly both in "client push installation" and "computer client agent". Account was cleared and set again but warning is the same.
    At last I found the problem. In the beginning of SMS_CLIENT_CONFIG_MANAGER initialization there is a string in the ccm.log:
    "~WARNING: failed to encrypt account domain\account $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=2656 (0xA60)>"
    I think that's the source of trouble. But I can't find the reason.
    By the way, the same message is in policypv.log:
    "~failed to encrypt network access accountdomain\account $$<SMS_POLICY_PROVIDER><Date Time Russian Standard Time><thread=3720 (0xE88)>"
    It's exactly so in log, without space between "account" word and "domain\account"!
    Any domain account I try to add for push installation appears in these logs with the same encrypt error!
    Can anyone help please?
    Thanks a lot!

    After restoring SCCM from old x86 server to new x64 server I cannot install clients.
    Current version is SCCM 2007 SP2 without R2. SCCM is in mixed mode, SCCM was installed to SAME path, was successfully restored from backup using "ConfigMgr Site Repair Wizard".
    But new clients cannot be installed now.
    The following is in ccm.log:
    "---> Warning: no remote client installation account found $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=3936 (0xF60)>
    ---> Attempting to connect to administrative share '\\computername\admin$' using machine account.~ $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=3936 (0xF60)>
    ---> Failed to connect to \\computername\admin$ using machine account (1203) $$<SMS_CLIENT_CONFIG_MANAGER><Date Time Russian Standard Time><thread=2900 (0xB54)>"
    We're having the EXACT same problem after our migration today from x86 --> x64.  Please tell me you've found a solution.  We're ready to revert to a snapshot tomorrow if we can't figure this out.

  • Win 7 Pro 64 occasionally fails to connect using IKEV2 to Win2008R2 Routing and Remote Access server

    I'm a networking guy and having this troubling VPM issue that I can't find.
    I have a number of VPN connections from my Win7Pro 64 PC to various customers.  Their end points are all Windows Routing and Remote Access on Windows 2008R2 STD servers.
    Every once and a while I will hang at Verifying User ID and Password and eventually get  ERROR 809. Change the security type on my VPN connection from IKEV2 to PPTP - never an issue, connects in right away.
    I can also try from another PC (at the same or alternate location) to get into that same server using the same credentials and access - no issue using either IKEV2 or PPTP.
    This has happened at various times to various customers. Here is what I know it is not:
    - Not the local or remote routers or Firewalls since I can always get in from other PC's going through the same network. Even so, tried rebooting all several times
    - Not an ISP issue at either end since I can always get into other IKEV2 servers from the same PC and from other PC's to the server I can't from my PC.
    This leads to the only logical conclusion.  It is something to do with my Win7Pro 64 PC but for the life of my I can not find it.
    I have obviously tried rebooting the Win7Pro PC. I have also tried recreating the VPN connection several times. Nothing.
    Help!

    Hi,
    I know that you've mentioned that it is not a issue about firewall or router settings, but this error usually comes when some firewall between client and server is blocking the ports used by VPN tunnel.
    so to allow IKEv2 traffic, please make sure to configure the network firewall to open UDP ports 500 and 4500, and to allow IP protocol 50.
    If that is not possible, deploy SSTP based VPN tunnel on both VPN server and VPN client – that allows VPN connection across firewalls, web proxies and NAT
    You can refer to this blog
    http://blogs.technet.com/b/rrasblog/archive/2006/06/14/which-ports-to-unblock-for-vpn-traffic-to-pass-through.aspx
    Regards
    Yolanda
    TechNet Community Support

  • Desktop Integration Suite 11g: cannot connect using webdav

    Hi,
    I installed UCM 11g on my Windows 7 laptop, server is up and running and I can log on and post content through the web interface.
    I successfully installed Desktop Integration Suite, but when I try to make a connection in Windows Explorer to my UCM server, I get the following error:
    >>>>
    "Server configuration properties could not be obtained."
    "<?hda version="11gR1-11.1.1.3.0-idcprod1-100505T121221" jcharset=UTF8 encoding=utf-8?>
    @Properties LocalData
    StatusCode=-32
    blFieldTypes=StatusMessage message
    IdcService=COLLECTION_PROFILE_GET_COLUMNS
    StatusMessage=No service defined for COLLECTION_PROFILE_GET_COLUMNS.
    blDateFormat='{ts' ''yyyy-MM-dd HH:mm:ss{.SSS}[Z]'''}'!tEurope/Paris
    @end
    <<<<
    Anyone have an idea why I can't connect ?
    regards,
    Bjorn.

    Sounds like the service isn't running. Can you verify that the Folders_g component is enabled on the Admin ---> config for <instance> page? Can you browse to a Contribution Folder through the web interface of Content Server? Sorry if they've changed any of the Folders terms in 11g, I'm using 10g.

  • Toplink fails to connect using Datasource

    I'm deploying an EJB project using Toplink persistence to Oracle AS 10.1.3.1 and have defined a datasource/connection pool as:
    <managed-data-source name="OAS_Oracle_Datasource"
    connection-pool-name="My_Connection_Pool"
    jndi-name="jdbc/OAS_Oracle_Datasource"/>
    <connection-pool
         name="My_Connection_Pool"
         min-connections="3"
         max-connections="10">
    <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"
    user="joeuser"
    password="joepasswd"
    url="jdbc:oracle:thin:@dbserver:dev01">
    </connection-factory>
    </connection-pool>
    Once deployed I can test the datasource/connection pool successfully from the admin GUI. I can also access the database from an external client using the same connection parameters. However, I see this stack trace in log.xml:
    Exception [TOPLINK-4002] (TopLink (Oracle OC4J CMP) - 10g Release 3 (10.1.3.1.0) (Build 061004)): oracle.toplink.exceptions.DatabaseException
    Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
         at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:276)
         at oracle.toplink.internal.ejb.cmp.oc4j.Oc4jNonJtaConnector.connect(Oc4jNonJtaConnector.java:49)
         at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
    <SNIP>
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
    <SNIP>
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
         at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:218)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:114)
    <SNIP>
         at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:197)
         at oracle.oc4j.sql.ManagedDataSource.getNonTransactionalConnection(ManagedDataSource.java:167)
         at oracle.oc4j.sql.ManagedDataSource.getNonTransactionalConnection(ManagedDataSource.java:153)
         at oracle.toplink.internal.ejb.cmp.oc4j.Oc4jNonJtaConnector.connect(Oc4jNonJtaConnector.java:44)
         ... 27 more
    Anyone run into this problem? If so please share your fix.
    Thanks,
    Gerald

    OK, a little more light shines on this mystery...
    It turns out that the deployer-generated orion-ejb-jar.xml was using a data-source attribute pointing at the jdbc/OracleDS datasource in the default application, which OAS creates during install. Of course this wasn't set to anything in particular, and if Toplink is using this behind the scenes it wouldn't connect.
    Now the question is how do I get my datasource stuffed into the auto-generated orion-ejb-jar.xml data-source? Would be nice if there was a way to specify some Toplink datasource property in the orion-ejb-jar.xml before it gets processed by the deployer into its eventual resting place under application-deplyments.
    Gerald

  • Reason 413: User authentication failed. rv320

    I tried to use your Cisco VPN CLient ( )
    ANd I got always this error:
    Initializing the connection...
    Contacting the security gateway at 24.37.141.234...
    Authenticating user...
    Contacting the security gateway at 24.37.141.234...
    Secure VPN Connection terminated locally by the Client.
    Reason 413: User authentication failed.
    Connection terminated on: Mar 31, 2014 21:46:35        Duration: 0 day(s), 00:00.00
    Not connected.

    The actual reson of failure can be seen on the external authentication server. If you have a radius server, please go and check what error message are you getting there.
    Could be dial-in issue, max-number of session, wrong password, acount locked-out etc
    Also let us know what radius are you using?
    Jatin Katyal
    - Do rate helpful posts -

  • Event ID 6038 LsaSrv NTLM authentication warning

    Searching the internets we haven't found any other references to this particular Event ID Warning message. 
    It's likely new in Windows Server 2012, we are part of an Active Directory that is at Forest Functional Level:
     Windows Server 2008, but out Child Domain is at Domain Functional Level:
     Windows Server 2012 (3 Domain Controllers in our Child Domain). 
    Clicking on the URL in the Description of the Event ID just link to a ‘Windows Server Future Resources’ placeholder page. 
    The full Event ID is pasted in below.
    We would like to know how to complete these checks, and if possible, raise our NTLM Authentication to Kerberos. 
    How are these tasks accomplished on Windows Server 2012 Domain Controllers? 
    Thanks in advance for any help! 
    Log Name:      System
    Source:        LsaSrv
    Date:         
    12/27/2012 6:00:01 PM
    Event ID:      6038
    Task Category: None
    Level:        
    Warning
    Keywords:      Classic
    User:         
    N/A
    Computer:      <server
    FQDN>
    Description:
    Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and this server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
    NTLM is a weaker authentication mechanism. Please check: 
          Which applications are using NTLM authentication?
          Are there configuration issues preventing the use of stronger authentication such as Kerberos authentication?
          If NTLM must be supported, is Extended Protection configured? 
    Details on how to complete these checks can be found at http://go.microsoft.com/fwlink/?LinkId=225699.

    Thank you for your reply, your links above address Kerberos vs. NTLM specifically for IIS.
    I did more digging and found this TechNet link that deals with Kerberos vs. NTLM for Domain Controllers. 
    It looks to be the best/only article I can find from Microsoft on how to audit NTLM usage, and eventually get to the point of using the group policy settings - Network Security: Restrict NTLM. 
    So until they update/activate the URL in the 6038 Event ID description to something better/more concise, this TechNet link will have to do: 
    Auditing and restricting NTLM usage guide
    http://technet.microsoft.com/en-us/library/jj865674(v=ws.10).aspx
    Applies To: Windows 7, Windows 8, Windows Server 2008 R2, Windows Server 2012
    This guide for the IT professional introduces the steps required to reduce NTLM usage in your environment by using available tools and the restrict NTLM audit and blocking policies, which were introduced in the Windows Server 2008 R2 and Windows 7 operating
    systems.
    With the advent of more secure authentication protocols, such as Kerberos, industry requests for the ability to better manage the NTLM protocol in their environments have increased. Reducing the usage of the NTLM protocol in an IT environment requires both
    the knowledge of deployed application requirements on NTLM and the strategies and steps necessary to configure computing environments to use other protocols. New tools and settings have been added to help you discover how NTLM is used in order to selectively
    restrict NTLM traffic.
    This guide only addresses how to collect and analyze events by using functionality found in the Windows operating environment.

  • SSO not authorized: Authentication failed.

    Dear Experts,
    I made a homogeneous system copy of my BI 70 prod to quality. I followed the steps according to the docs. After the system copy I did applying new licenses( ABAP, Portal, J2ee) , deleting old portal abap certficates, creating them on both portal & abap, exchage the certificates. All done as per the docs
    Now the ABAP engine is trusting the portal. I mean I am able to login into portal.
    But Portal is not trusting the ABAP, I have issues with BEx tools.
    I did many times delete certficates, exchange them manually and using template installer.
    I also followed the Notes
    917950 - SAP NetWeaver 2004s: Setting Up BEx Web
    888687 - BEx Web Java: Analysis of communication/logon problems
    No use, Now I coming back to square one.
    Has anyone has special thoughts on this issue?
    Thanks for your time and help.
    MB

    I did many times delete certficates, exchange them manually and using template installer.
    I also followed the Notes
    917950 - SAP NetWeaver 2004s: Setting Up BEx Web
    888687 - BEx Web Java: Analysis of communication/logon problems
    support desktool as per
    note 937697
    SE38 ( RSPOR_SETUP ).... etc
    All are failing at one point.
    ================================================
    Status 12: Maintain User Assignment in Portal           System failure during call of function module RSWR_RFC_SERVICE_TEST
    This is the error message we are getting on the Java cluster log
    #1.#000255334607006B00000026003D500800044709864436FE#1204006139737#com.sap.engine.services.rfcengine##com.sap.engine.services.rfcengine.handleRequest#J2EE_GUEST#0####522996e0e43111dc9cb8000255334607#SAPEngine_Application_Thread[impl:3]_27##0#0#Error##Plain###java.lang.RuntimeException:
    call FM RSWR_PREEXECUTION_PROXY to ProgId BIQ_PORTAL_BIQ on host
    afgprd01 with SSO not authorized: Authentication failed.
    ===============================================
    No use, No use ....Now I coming back to square one.
    Has anyone has special thoughts on this issue?
    Thanks for your time and help.
    MB

  • Ntlm authenticated apps fails after 3.1.1 upgrade

    I upgraded my apex instance to 3.1.1 on Friday without any issues. I can log into application builder without any problems and the version 3.1.1.00.09.
    Everything in app builder works as expected. However, when I try to run my NTLM authenticated application, I get errors and the page fails to load.
    Furthermore, this only happens on my 11g database.
    The exact same app, using the same NTLM authentication works just fine on 10g.
    The Apache errors log states:
    mod_plsql: /pls/apex/f HTTP-404 ORA-03113: end-of-file on communication channel\n
    mod_plsql: Unable to reset state for mode 0: Err 3114 url=>/pls/apex/f           I have PlsqlErrorStyle          DebugStyle set, so the page returns a fair amount of data.
    Wed, 28 May 2008 14:07:17 GMT
    ORA-03113: end-of-file on communication channel
      DAD name: apex
      PROCEDURE  : f
      URL        : http://ecydblcyorwqt03.ecy.wa.lcl:80/pls/apex/f?p=127:51:339228564056494:::::
      PARAMETERS :
      ===========
      p:
       127:51:339228564056494:::::
      ENVIRONMENT:
      ============
        PLSQL_GATEWAY=WebDb
        GATEWAY_IVERSION=2
        SERVER_SOFTWARE=Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server
        GATEWAY_INTERFACE=CGI/1.1
        SERVER_PORT=80
        SERVER_NAME=ecydblcyorwqt03.ecy.wa.lcl
        REQUEST_METHOD=GET
        QUERY_STRING=p=127:51:339228564056494:::::
        PATH_INFO=/f
        SCRIPT_NAME=/pls/apex
        REMOTE_HOST=
        REMOTE_ADDR=165.151.57.100
        SERVER_PROTOCOL=HTTP/1.1
        REQUEST_PROTOCOL=HTTP
        REMOTE_USER=ECY\taus461
        ORACLE_SSO_USER=
        OSSO_IDLE_TIMEOUT_EXCEEDED=
        OSSO_USER_GUID=
        HTTP_CONTENT_LENGTH=
        HTTP_CONTENT_TYPE=
        HTTP_USER_AGENT=Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.14) Gecko/20080404 Firefox/2.0.0.14
        HTTP_HOST=ecydblcyorwqt03
        HTTP_ACCEPT=text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
        HTTP_ACCEPT_ENCODING=gzip,deflate
        HTTP_ACCEPT_LANGUAGE=en-us,en;q=0.5
        HTTP_ACCEPT_CHARSET=ISO-8859-1,utf-8;q=0.7,*;q=0.7
        HTTP_COOKIE=WEBWPLCS_USER=TAUS461; WEBWPLCS_LAST=04.29.2008 11:41:38; ORA_WWV_R1=%23ALL; ORA_WWV_R2=%23ALL; ORA_WWV_R3=%23ALL; ORA_WWV_REMEMBER_UN=ADMIN:webwplcs; ORACLE_PLATFORM_REMEMBER_UN=ADMIN:webwplcs; ORA_WWV_USER=3B1A5D9EA835D646; WWV_CUSTOM-F_1021906798187125_122=9F806B35C3D9AF51
        HTTP_IF_MODIFIED_SINCE=
        HTTP_REFERER=http://ecydblcyorwqt03/pls/apex/f?p=4000:4150:339228564056494::NO:::
        HTTP_SOAPACTION=
        HTTP_ORACLE_ECID=1211983633:165.151.5.125:6156:6252:488,0
        HTTP_ORACLE_CACHE_VERSION=
        HTTP_AUTHORIZATION=NTLM  xyz
        WEB_AUTHENT_PREFIX=
        DAD_NAME=apex
        DOC_ACCESS_PATH=docs
        DOCUMENT_TABLE=wwv_flow_file_objects$
        PATH_ALIAS=
        REQUEST_CHARSET=AL32UTF8
        REQUEST_IANA_CHARSET=UTF-8
        SCRIPT_PREFIX=/pls
        HTTP_IF_MATCH=
        HTTP_CACHE_CONTROL=
        SOAP_BODY=
        HTTP_X_ORACLE_DEVICE_CLASS=
        HTTP_X_ORACLE_DEVICE_ORIENTATION=
        HTTP_X_ORACLE_DEVICE_MAXDOCSIZE=
        HTTP_X_ORACLE_DEVICE=
        HTTP_X_ORACLE_ORIG_ACCEPT=
        HTTP_X_ORACLE_ORIG_USER_AGENT=
        HTTP_X_ORACLE_USER_LOCALE=
        HTTP_X_ORACLE_USER_NAME=
        HTTP_X_ORACLE_USER_DISPLAYNAME=
        HTTP_X_ORACLE_USER_USERKIND=
        HTTP_X_ORACLE_USER_AUTHKIND=
        HTTP_X_ORACLE_USER_DEVICEID=
        HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE1=
        HTTP_X_ORACLE_USER_LOCATION_ADDRESSLINE2=
        HTTP_X_ORACLE_USER_LOCATION_ADDRESSLASTLINE=
        HTTP_X_ORACLE_USER_LOCATION_BLOCK=
        HTTP_X_ORACLE_USER_LOCATION_CITY=
        HTTP_X_ORACLE_USER_LOCATION_COMPANYNAME=
        HTTP_X_ORACLE_USER_LOCATION_COUNTY=
        HTTP_X_ORACLE_USER_LOCATION_STATE=
        HTTP_X_ORACLE_USER_LOCATION_POSTALCODE=
        HTTP_X_ORACLE_USER_LOCATION_POSTALCODEEXT=
        HTTP_X_ORACLE_USER_LOCATION_COUNTRY=
        HTTP_X_ORACLE_USER_LOCATION_TYPE=
        HTTP_X_ORACLE_USER_LOCATION_X=
        HTTP_X_ORACLE_USER_LOCATION_Y=
        HTTP_X_ORACLE_SERVICE_HOME_URL=
        HTTP_X_ORACLE_SERVICE_PARENT_URL=
        HTTP_X_ORACLE_HOME_URL=
        HTTP_X_ORACLE_MODULE_CALLBACK_URL=
        HTTP_X_ORACLE_MODULE_CALLBACK_LABEL=
        HTTP_X_ORACLE_CACHE_USER=
        HTTP_X_ORACLE_CACHE_SUBID=
        HTTP_X_ORACLE_CACHE_AUTH=
        HTTP_X_ORACLE_CACHE_DEVICE=
        HTTP_X_ORACLE_CACHE_LANG=
        HTTP_X_ORACLE_CACHE_ENCRYPT=
        HTTP_X_ORACLE_ASSERT_USER=There are no invalid objects in the FLOWS schema and the page sentry function I use for NTLM is also valid.
    There isn't a database connection issue since both builder and SQL Plus works.
    Here is my NTLM Page Sentry which is a slightly modified version of the GreenIT version
    CREATE OR REPLACE FUNCTION modNtlmPageSentry(pApexUser IN VARCHAR2 DEFAULT 'APEX_PUBLIC_USER')
    RETURN BOOLEAN
    IS
      vAuthenticatedUsername  VARCHAR2(512);
      vCurrentSessionId       NUMBER;
      l_cnt binary_integer :=0;
    BEGIN
      -- Get Authenticated User.
      vAuthenticatedUsername := UPPER(owa_util.get_cgi_env('REMOTE_USER'));
      vAuthenticatedUsername := substr(vAuthenticatedUsername,instr(vAuthenticatedUsername,'\')+1);
      if to_char(v('APP_ID')) = '127' -- WebWPLCS
      then
           apex_util.set_session_state('P18_USERNAME',vAuthenticatedUsername);
      elsif to_char(v('APP_ID')) = '124' --TMS
      then
      -- check to see if they are a listed TMS manager or overall admin
          select sum(cnt) into l_cnt
          from (
               select count(0) cnt
               from tms_managers
               where username=vAuthenticatedUsername
               union
               select count(0) cnt
               from tms_admin
               where username=vAuthenticatedUsername
               union
               select count(0) cnt
               from web_admin
               where username=vAuthenticatedUsername
          if l_cnt < 1
          then
         return FALSE;
          end if;
      end if;
      -- Check to ensure that we are running as the correct database user.
      IF USER ^= UPPER(pApexUser) THEN
        RETURN FALSE;
      END IF;
      IF vAuthenticatedUsername IS NULL THEN
        RETURN FALSE;
      END IF;
      -- Get SessionId.
      vCurrentSessionId := wwv_flow_custom_auth_std.get_session_id_from_cookie;
      -- Check Application Session Cookie.
      IF wwv_flow_custom_auth_std.is_session_valid THEN
        apex_application.g_instance := vCurrentSessionId;
        -- Check Authenticated User --> Username from wwv_flow_session$ for
        --   current Session.
        IF vAuthenticatedUsername = wwv_flow_custom_auth_std.get_username THEN
          wwv_flow_custom_auth.define_user_session(p_user => vAuthenticatedUsername,
            p_session_id => vCurrentSessionId);
          RETURN TRUE;
        ELSE
          -- Unset the Session Cookie and redirect back here to take other branch.
          wwv_flow_custom_auth_std.logout(p_this_flow => v('FLOW_ID'),
            p_next_flow_page_sess => v('FLOW_ID') || ':' || NVL(v('FLOW_PAGE_ID'), 0)
            || ':' || vCurrentSessionId);
          -- Tell Apex Engine to quit.
          apex_application.g_unrecoverable_error := TRUE;
          RETURN FALSE;
        END IF;
      ELSE
        -- Application Session Cookie not valid --> Define a new Apex Session.
        wwv_flow_custom_auth.define_user_session(p_user => vAuthenticatedUsername,
          p_session_id => wwv_flow_custom_auth.get_next_session_id);
        -- Tell Apex Engine to quit.
        apex_application.g_unrecoverable_error := TRUE;
        IF owa_util.get_cgi_env('REQUEST_METHOD') = 'GET'  THEN
          wwv_flow_custom_auth.remember_deep_link(p_url => 'f?' ||
            wwv_flow_utilities.url_decode2(owa_util.get_cgi_env('QUERY_STRING')));
        ELSE
          wwv_flow_custom_auth.remember_deep_link(p_url => 'f?p=' ||
            TO_CHAR(apex_application.g_flow_id) || ':' ||
            TO_CHAR(NVL(apex_application.g_flow_step_id, 0)) || ':' ||
            TO_CHAR(apex_application.g_instance));
        END IF;
        -- Register the Session in Apex Sessions Table, set Cookie, redirect back.
        wwv_flow_custom_auth_std.post_login(p_uname => vAuthenticatedUsername,
          p_session_id => nv('APP_SESSION'), p_flow_page => apex_application.g_flow_id
          || ':' || NVL(apex_application.g_flow_step_id, 0));
        RETURN FALSE;       
      END IF;   
    END modNtlmPageSentry;Does anyone have any ideas on where to look next?
    Regards, Tony
    <b>Update</b>
    For kicks, I added the page sentry function to the list in the <b>wwv_flow_epg_include_mod_local</b> function.
    I bounced both the HTTP Server and the database.
    None of these actions solved the problem.

    Joel -
    The alert log states that there is a 7445 error now from Apache
    host_id='ECYDBLCYORWQT01' host_addr='165.151.5.123' module='Apache.exe'
    pid='416'>
    <txt>Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0x0] [PC:0x69A2AB3, _pfrinstr_BRNCCOND()+39]
    msg_id='1422874948' type='INCIDENT_ERROR' group='Access Violation'
    level='1' host_id='ECYDBLCYORWQT01' host_addr='165.151.5.123'
    prob_key='ORA 7445 [pfrinstr_BRNCCOND()+39]' upstream_comp='' downstream_comp=''
    ecid='' errid='12252' ORA-07445: exception encountered: core dump [pfrinstr_BRNCCOND()+39] [ACCESS_VIOLATION] [ADDR:0x0] [PC:0x69A2AB3] [UNABLE_TO_READ] []The trace file just states the same 7445 error:
    ORA-07445: exception encountered: core dump [pfrinstr_BRNCCOND()+39] [ACCESS_VIOLATION] [ADDR:0x0] [PC:0x69A2AB3] [UNABLE_TO_READ] []The incident trace file states that the current SQL was:
    ----- Current SQL Statement for this session (sql_id=bng4udk9mvtsh) -----
    declare function x return boolean is begin
    return mergedwplcs.modNtlmPageSentry; return false; end;
    begin
    wwv_flow.g_boolean := x; end;
    ----- PL/SQL Stack -----
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    2B6ACD34      1020  package body FLOWS_030100.WWV_FLOW_CUSTOM_AUTH_STD
    2B6ACD34       662  package body FLOWS_030100.WWV_FLOW_CUSTOM_AUTH_STD
    2B6BB44C        59  function MERGEDWPLCS.MODNTLMPAGESENTRY
    2B6BBD1C         2  anonymous block
    2B6BBD1C         4  anonymous block
    2B6BC674      1815  package body SYS.DBMS_SYS_SQL
    2B6BD29C       296  package body SYS.WWV_DBMS_SQL
    2B70B5D0      1352  package body FLOWS_030100.WWV_FLOW_SECURITY
    2B70B5D0      1158  package body FLOWS_030100.WWV_FLOW_SECURITY
    2B71BA2C      8847  package body FLOWS_030100.WWV_FLOW
    2B72FB04       255  procedure FLOWS_030100.F
    2B7E4F1C        31  anonymous blockWhich makes sense given that I was trying to log into the application. All of these functions and packages are valid.

  • Authentication Failed Exception while reading mail using POP

    Hi,
    I am using POP3 for reading mails from mail id. When I try to read the mail from Microsoft Exchange server 2007, it is a success. But same code is giving "Authentication Failed Exception" with Microsoft Exchange server 2010.
    One more difference, I figured out. Microsoft Exchange server 2007 is having NTLM as LoginType and code works fine with it. Where as Microsoft Exchange server 2010 is having TLS as LoginType and code is giving "Authentication Failed Exception".
    Line of code which is giving exception is...
    store = session.getStore(providerPOP3);
    store.connect(host, user, password); //throws exception
    Please advice how this code can work with Microsoft Exchange server 2010 having TLS as LoginType.
    Regards,

    Thanks for your reply.
    Yes, I am using javamail 1.4.3. My code is working fine with Exchange server 2007 having NTLM.
    But when I changed the credentials as per mail id configured on Exchange Server 2010 having TLS support, it did not work. Can you please help what code change would be required to read mails from mail id configured on Exchage Server 2010 having TLS support.
    Sorry, if my point seems not understandable as I am as new with these terminologies (mail server and all) as baby with world. :)
    Thanks for supprt.

  • Toshiba EXCITE Pro - WIFI connection. Authentication failed after update

    Hello.
    Just received this Tablet.
    Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
    After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
    After that i started testing ,Wps connection , No security Wifi etc etc.
    *Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
    After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
    However this is frustrating.
    Maybe you have to sort this out?
    I have seen and other people returning this tablet after having this problem.
    It is not a hardware problem since its working ok before the update.
    Of course tried factory reset twice.
    Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*

    Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
    It requires a complete reset. Not the soft reset from within Android.
    I'll post it here as they will check through moderation I guess.
    Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
    The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
    1. Make sure the tablet is off and not in standby.
    2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
    3. Use the volume buttons to select the white box on the right.
    4. Once selected, press the power button.
    5. Use the volume buttons to select wipe cache partition and then press the power button.
    6. Select Yes and press the power button.
    7. Use the volume buttons to select wipe data/factory reset and then press the power button.
    8. Select Yes and press the power button.
    9. The tablet will now reset.
    If you have any issues after the reset please get back to us as soon as possible!
    Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
    Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
    They needed my name and serial numbers probably to log problems etc.
    Message was edited by: bensimmo

  • I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

    My current softward is: Mac OS X Lion 10.7.5 (11G63)
    When I attempt to use the Filezilla connection wizard I get the following message:
    Connecting to probe.filezilla-project.org
    Response: 220 FZ router and firewall tester ready
    USER FileZilla
    Response: 331 Give any password.
    PASS 3.7.1.1
    Response: 230 logged on.
    Checking for correct external IP address
    Retrieving external IP address from http://ip.filezilla-project.org/ip.php
    Checking for correct external IP address
    IP 27.0.19.56 ch-a-bj-fg
    Response: 200 OK
    PREP 52470
    Response: 200 Using port 52470, data token 1871898076
    PORT 27,0,19,56,204,246
    Response: 200 PORT command successful
    LIST
    Response: 150 opening data connection
    Response: 503 Failure of data connection.
    Server sent unexpected reply.
    Connection closed
    When I attempt to login Host/Username/Password myself I get the following message:
    Status:          Resolving address of amyhoney.com
    Status:          Connecting to 184.168.54.1:21...
    Status:          Connection established, waiting for welcome message...
    Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
    Response:          220-You are user number 12 of 500 allowed.
    Response:          220-Local time is now 04:05. Server port: 21.
    Response:          220-This is a private system - No anonymous login
    Response:          220 You will be disconnected after 3 minutes of inactivity.
    Command:          USER 5475****
    Response:          331 User 5475**** OK. Password required
    Command:          PASS ********************
    Response:          530 Login authentication failed
    Error:          Critical error
    Error:          Could not connect to server
    Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
    Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
    Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
    I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
    Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
    HELP!!

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

Maybe you are looking for

  • Cannot connect to the internet with firefox

    Firefox opens (sort of) to my Yahoo home page, but shows only my Bookmarks sidebar, and the top toolbars, plus a blank page and a tab labeled "Untitled" == This happened == Every time Firefox opened == About 9:00AM today. Was fine from 6:30 to 8:00AM

  • Can't complete the itunes download

    Currently running with Windows Vista on my laptop and I'm trying to download itunes. Every time it gets to 30% downloaded or 22.7 MB out of 75.3 MB and stops. Eventually it times out. I had the same problem with Windows XP trying to update from itune

  • SD card in CD slot!

    I have foolishly put an SD card into the CD slot by mistake and it has disappeared. Any tips as to how to retrieve it would be most welcome. Thanks!

  • PREINST17.SWM on 'restore to factory settings'

    I am on my second set of recovery disks for a Satellite. Both sets have failed with the same error message on disk number 3: "Invalid MS-DOS function. PREINST17.SWM Type: SWM File Size: 671MB Date Modified: 4/1/2012 9:28 PM" Based on advice here, i t

  • How to stop Automatic import of photo stream photos?

    Photos app is automatically importing every picture from photo stream. Even after deleting the photos in photo stream they are still showing up in the photos library. How do I stop auto import? There does not seem to be a way to stop this. It is savi