NTLM Integration with SMTP

Hi Dear Members,
I am getting following exception on NTLM authentication for SMTP ,Can you please send me the integration of NTLM with javamail SMTP.
Thank you very much
Anil .
535 5.7.3 Authentication unsuccessful
javax.mail.AuthenticationFailedException: 535 5.7.3 Authentication unsuccessful

Thank you Shanon,
I would like to post whole exception,Can you please check once and let me know its surely problem with permissions.
*50-EXCH07.corp.scwa.com Hello [10.1.1.31]*
*250-SIZE 52428800*
*250-PIPELINING*
*250-DSN*
*250-ENHANCEDSTATUSCODES*
*250-STARTTLS*
*250-AUTH GSSAPI NTLM*
*250-8BITMIME*
*250-BINARYMIME*
*250 CHUNKING*
DEBUG SMTP: Found extension "SIZE", arg "52428800"
DEBUG SMTP: Found extension "PIPELINING", arg ""
DEBUG SMTP: Found extension "DSN", arg ""
DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg ""
DEBUG SMTP: Found extension "STARTTLS", arg ""
DEBUG SMTP: Found extension "AUTH", arg "GSSAPI NTLM"
DEBUG SMTP: Found extension "8BITMIME", arg ""
DEBUG SMTP: Found extension "BINARYMIME", arg ""
DEBUG SMTP: Found extension "CHUNKING", arg ""
DEBUG SMTP: Attempt to authenticate
DEBUG SMTP: check mechanisms: LOGIN PLAIN DIGEST-MD5 NTLM
DEBUG SMTP: mechanism LOGIN not supported by server
DEBUG SMTP: mechanism PLAIN not supported by server
DEBUG SMTP: mechanism DIGEST-MD5 not supported by server
DEBUG NTLM: type 1 message: suppliedDomain: scwa.com; suppliedWorkstation: anilp; flags: 0x00001201
DEBUG NTLM: type 1 message length: 45
AUTH NTLM TlRMTVNTUAABAAAAATIAAAgACAAgAAAABQAFACgAAABTQ1dBLkNPTUFOSUxQ
*334 TlRMTVNTUAACAAAAAAAAADgAAAABAgACqACFj4Jj6BkAAAAAAAAAAAAAAAA4AAAABQLODgAAAA8=*
TlRMTVNTUAADAAAAGAAYAEAAAAAwADAAWAAAABAAEACIAAAAEAAQAJgAAAAKAAoAqAAAAAAAAAAAAAAAARIAAAb3tgt0MQY2IrDhGFlWlhKgREXn6rmaxI5fXysDocEtqWQeLTtIEl8BAQAAAAAAABB/XLilL8sBp04jz40bvfgAAAAAAAAAAHMAYwB3AGEALgBjAG8AbQBsAGUAdgBlAGwAbwBuAGUAYQBuAGkAbABwAA==
*535 5.7.3 Authentication unsuccessful*
javax.mail.AuthenticationFailedException: 535 5.7.3 Authentication unsuccessful

Similar Messages

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

SharePoint 2013 on-premises integration with third party email account

the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech Learner

Hi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

SMS gateway integration with UCCX 7.0

I have a question, can we perform SMS gateway integration with Cisco Unified Contact Center Express 7.0 premuim license?

Just to enhance Somar's response a bit: The CCX Premium licnese activates an SMTP subsystem in CCX. This allows you to send emails from within a script. As long as the SMS gateway can accept SMTP you should be able to make it work.

Forte Integration With Exchange or Netscape CalendarServer

Hi folks.
I am trying to write an application that will either talk to Ms Exchange
or the Netscape Calender Server.
The application should automatically make an appointment on the user's
calendar based on the time and date specificied. Over here I am not sure
what components that Microsoft or Netscape has provided for us to
integrate with their calendar systems? Has anyone actually implemented
this? What are the alternatives that I have?
Will Ms MAPI or Netscape's Messaging Access SDK works?
Thanks
from: Suen

What you need to do is integrate Forte with MAPI.
You can either create a Forte 'C' project that has a direct mapping to
each of the functions supported by MAPI OR write a wrapper library for
that accepts the basic parameters to initialize mapi and send/receive
mail and talks to MAPI by itself.
We have taken the second approach and have our application totally
integrated with MAPI.
You can read more about integrating with C in the 'Integrating with
External Systems' manaual.
Inderjyot Singh Sabharwal
Indus Consultancy Services
201-261-3100 x232
[email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Monday, January 12, 1998 9:59 AM
To: doug; forte-users
Cc: george
Subject: Forte Integration with MS Outlook
Hi all,
Would like to ask if anyone has done any integration between Forte and
Microsoft Outlook? or even Exchange?
Would appreciate any information.
Thanks,
Steven Wong
Distributed Objects Sdn. Bhd.
22, Jalan USJ 9/5T,
47620 UEP Subang Jaya,
Selangor Darul Ehsan, Malaysia.
Tel : (603) 5310 777 ext. 309
(603) 5310 222 ext. 309
Email : [email protected]

Forte Integration with AS/400

Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

You can also investigate using IBMs MQ Series. Other message oriented
middleware may also have AS/400 ports available (such as Tuxedo).
-J
Mike Burke wrote:
>
Could you please provide some more information on what you plan to do
here? Are you looking to just pull data from the AS/400? Will you be
sending data back to the AS/400?
The AS/400 has supported Berkley Sockets; since, Release V3R1. Your
best bet for now is probably to use Forte's ExternalConnection class to
communicate with a C socket provider/consumer on the AS/400 side.
Please see Forte's "Integrating With External Systems" manual for
further information on the ExternalConnection class.
Also, I heard a couple of months ago that IBM plans to incorporate a
fully compliant CORBA ORB in a future release of OS/400. I haven't
heard if they have followed through on this. If so, CORBA would provide
another means for you to communicate with your AS/400 from Forte.
- Michael R. Burke
Born Information Services
e-mail: [email protected]
-----Original Message-----
From: Wei Suen Lai [SMTP:[email protected]]
Sent: Thursday, June 11, 1998 5:29 AM
To: Forte User Group
Subject: Forte Integration with AS/400
Hi, folks.
Like to ask if anyone has tried to access IBM AS/400 from a Forte
application?
Would like to know how can we do that and what are the best options we
have?
Appreciate if anyone could help me on this 'cos it is really
urgent....
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>--
John Jamison [email protected]
Vice President and Chief Technology Officer
Sage IT Partners, Inc.
Voice: 415 392-7243 x 306
Fax: 415 391-3899
Internet Enabled Business Change
http://www.sageit.com
-----------------------------------------------------

Exchange Integration with MSX-A on a Windows 2003 Server

Hi
We try to integrate Microsoft Exchange (Version 2003 SP1) into SAP Enterprise Portal 6.0 SR1. The MSX-A components are installed on the OWA System, a different Windows 2003 System with Outlook XP (SP3) on it.
The error displayed in the Calendar iView on the Portal:
"An internal error occurred while generating the XML from the MSX-A component"
From the "SAP EP Test Exchange Transport Setup" Tool an error occures on the "Data Retrieval" Test:
"An error occurred retrieving the data."
and in detail:
MAPI_E_LOGON_FAILED(80040111)
MS KBase http://support.microsoft.com/kb/181739/en-us didn't help. To resolution 3: Policy "Log on Locally" on a Windows 2003 doesn't exist anymore (?). "Deny Log on Locally" isn't given to relevant groups.
Thanks and best regards
Nicolaj

hi All
i am illustrating the process of integration the central notes to be referred and constraints .hope this definitely helps you please do not forget to give full points for this effort
with regards
subrato kundu
Process
Microsoft outlook Integration With SAP Enterprise Portal 6.0
(Process description)
These documents describe the entire process of integrating Exchange server with enterprise portal server to leverage the usage of lotus notes within the portal framework.
Step1: Create a System
o Choose System AdministrationSystem configurationSystem LandscapePortal ContentContent Provided by SAP. Right click on collaboration and then choose New From ParSystem.
o Select com.sap.netweaver.col.app.gw and choose next.
o Select a server (Microsoft Exchange server) and then choose next.
o Enter the System Name and ID (for ex Exchange) and choose next and then finish.
o Enter System Aliases by choosing system Alias from the display drown list.
o Enter the system Alias in the alias field and choose add and then save.
Step II: Create E-Mail Transport
 The email transport defines the SMTP server and other configuration required for sending e-mails. To configure an e-mail transport choose
 System AdministrationSystem ConfigurationKnowledge ManagementCollaborationGroupWare TransportsMail Transport
 SMTP Sever: The address of the SMTPServer for sending e-mails
 Sent Messages: You specify the folder on the server where the sent e-mail is to be store: -Sent Items on Microsoft Exchange Server.
 System Alias name: Alias that was defined for the groupware server in system configuration.
Step III: Check E-Mailing Service
This is a global service that is required for sending e-mails and which can be located by choosing System AdministrationSystem configurationKnowledge ManagementContent ManagementGlobal servicesMailing Service. This service needs to be active and an email transport must already have been created.
Microsoft Exchange Transports
The overall transport consists of two parts: MSX-J on the portal server and the MSX-A on the Exchange Server or a machine near to the Exchange Server.
MSX-J is the java part that runs on the portal server is deployed automatically on the portal server during installation, and implements the groupware API.It uses the Groupware APIs and repository development kit.
MSX-A is the active server page and sap exchange connector.dll running on a n iis server with Microsoft Collaboration data objects (CDO) and in the same domain as the exchange server or in a trusting domain .The ASP and DLL are Collectively CALLED MSX-A and is installed as part of the Outlook Installation. This needs to be installed on every IIS SERVER dedicated to the MS Exchange Server
 The Process flow is
1.TheMSX_J transport makes an HTTP(s) call to the MSX_A running on the IIS.
2.Microsoft Internet Information Server (IIS) uses Basic Authentication to authenticate user based on NT user/password against the Microsoft Exchange Server.
3.CDO uses the authentication token and fetches the data.
4.MSX-A converts the data into XMl and returns it to MSX-J
Installation of MSXA Components
You have to carry out these steps for every IIS that accesses the exchange server or the Outlook WEB Access 5.5 SP Server in the system landescape:
1.Locate the MSX-A component shipped with Exchange transport.
The components can be found in<irj>\root\WEB-INF\PORTAL\PORTALAPPS\com.sap.netweaver.coll.appgw\WEB INF\external\Exchange.
2 Locate an IIS that is in the same domain as the Exchange Server or in a trusted domain.
3.Create a folder on the IIS for example,c:\SAPExchangeTransport.
4.Copy the MSX-A Components to the folder you just created.
5.Register the DLL by using command regsrvr32 in the command prompt for example c:\winnt\sysytem32\regsvr32.exe c:\SAPExchangeTransport\SapExchangeConnector.dll
6.Create a new Iis Website or if using Outlook Web Access 5.5 sp4 create a virtual directory
Since most of configuration errors arise in the setup and configuration of the MSX-A components a separate test application is shipped with the connectivity, which allows you to check that the setup is correct.
1.locate SAPPXchTest.exe which is shipped with the exchange transports.The components can be found at <irj>\root\portalapps\com.sap.netweaver.coll.appl.gw\external\exchange.
2 copy the executable file to the machine on which the MSX-A component has been deployed.
3.Test the CDO version by launching the executable file on the machine on which msx-a was deployed.Choose Test CDO-Version .You should receive a success message .if you recive an error message follow the instructions given
4Test data retrieval by launching the executable file on the machine on which MSX-A was deployed choose TestData Retrieval Fill in necessary fields you should receive a success message but if you receive an error message follow the instructions given
5.Choose Save Results
6.open the log file indicted by the message
Notes
0000801234 Additional attachment in room created appointments
0000788151 Post Installation Steps for Groupware after an upgrade
0000763062 Problem creating an appointment with attachment
0000738965 E-mail address is mandatory for Groupware Integration
0000736644 Mandatory Steps for MS Exchange Integration
0000736541 Support information for MS Exchange Integration
0000732911 Integrating Outlook Web Access in Enterprise Portal 6.0
0000712902 SSO to Outlook web access using user/password does not work
Constraints
Constraints of Microsoft Exchange Connectivity
 The Microsoft Exchange transport currently only support items with types appointment and meeting request .Other types such as discussion and not currently not supported.
 Deleting an instance of a recurring appointment affects only that particular instance
 Calendar items in personal folder are not supported. Users can only view and modify items located on the exchange server from the iviews
 Public folders on the exchange server are not supported
 Calendar items are delivered as such if sent to recipients within the intranet .If the recipients is in different domain than the sender ,the format in which the items are delivered depends on the server responsible for sending the item in question

SAP integration with Lotus Notes

Hello Experts,
As we can do MS-Outlook integration with SAP BOne,my client is using "Lotus Notes",so if I want to integrate it with SAP Business One How it will be possible.
Plase let me know,
Thanking You!
Gauraw

Hi Gauraw,
Some information a colleague found on this:
==================
How to connect Microsoft Outlook with Lotus Notes e-mail servers
As none of the applications are SAP B1, the best resource is from
Microsoft and IBM
How to connect Microsoft Outlook with Lotus Notes e-mail servers
http://support.microsoft.com/kb/290834
Use Outlook to access your Lotus Domino mailbox
http://office.microsoft.com/en-us/outlook/HA010739021033.aspx
Deploying Microsoft Outlook Connector for Domino
http://office.microsoft.com/en-us/orkXP/HA011364481033.aspx
==================
Also:
The SBOMailer Service uses SMTP for sending emails - that means if the
Lotus Notes have an SMTP gateway/connector your client will be able to
use it for sending emails. Be aware that the gateway should not use SMTP
authentification (please see the note 782611). In that case you should
use an additional program between Lotus Notes and SBOMailer Service.
==================
Any other intergration does not exist to the best of my knowledge.
Hope some of this is useful.
Jesper

Forte integration with Accounting packages

Hello all,
I would like to have more information about how Forte has been used
to integrate with Accounting packages. Any information would be
beneficial to me.
Thank you.

What you need to do is integrate Forte with MAPI.
You can either create a Forte 'C' project that has a direct mapping to
each of the functions supported by MAPI OR write a wrapper library for
that accepts the basic parameters to initialize mapi and send/receive
mail and talks to MAPI by itself.
We have taken the second approach and have our application totally
integrated with MAPI.
You can read more about integrating with C in the 'Integrating with
External Systems' manaual.
Inderjyot Singh Sabharwal
Indus Consultancy Services
201-261-3100 x232
[email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Monday, January 12, 1998 9:59 AM
To: doug; forte-users
Cc: george
Subject: Forte Integration with MS Outlook
Hi all,
Would like to ask if anyone has done any integration between Forte and
Microsoft Outlook? or even Exchange?
Would appreciate any information.
Thanks,
Steven Wong
Distributed Objects Sdn. Bhd.
22, Jalan USJ 9/5T,
47620 UEP Subang Jaya,
Selangor Darul Ehsan, Malaysia.
Tel : (603) 5310 777 ext. 309
(603) 5310 222 ext. 309
Email : [email protected]

OIM 9.1.0 Integration with Active Directory 2008 R2

Hi,
My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
Any guidance is really appreciated.
Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
Is this a working and supported scenario by OIM v9.1.0 ?

I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
-Bikash

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

Session keep Alive when EBS is integrated with OIF acting as SP

We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
Sarbashis

It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM...

Excel integration with Entry and Approval for SSM not working

Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
-          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
-          The browser security is definitely set to accept all active X scripts
-          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
-          Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!

Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob

Jabber cannot Call - Integration with CUCM/AD

Dear all,
I installed CUCM 9.1.1 and CUPS 9.1.1 with Jabber client 9.0.1.
when I run Jabber on a joined domain PC (login with AD username and password), there are no problem with the calling ability.
But when I try to use a non-join domain PC (I am using VPN to connect to office network and using my personal PC), only the chatting feature that are available. I cannot loggin to phone accounts and cannot make any calls with my Jabber client.
Should I use UDS integration with AD?
Thanks,
Hasan

Hi Hasan,
Can you take a look on this thread:
https://supportforums.cisco.com/message/3914353#3914353
If you still have problem connecting, can you try with newer version of Jabber?
Regards,
Srdjan

NTLM Integration with SMTP

Similar Messages

Maybe you are looking for