NTP(Network Time Protocol) Error whil installing Oracle 11gR2 RAC

Dear Friends,
I have installed oracle 11gr2 clusterware software in two node RAC. While i run the CLUVFY.SH, It shows error in NTP configuration.
1)I add "-x" parameter in "/etc/sysconfig/ntp" configuration file. and start the ntpd service and run the cluvfy.sh . then i got the below error.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 no
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
=============================================================================================
2)Down the ntpd service in both nodes and run the CLUVFY.SH.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 yes
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
==========================================================================
3)Based on some website advice, I down the ntpd service and move the "/etc/ntpd.conf" to another location.Then i got the below error.
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
ERROR:
PRVF-5402 : Warning: Could not find NTP configuration file "/etc/ntp.conf" on node "rac2"
PRVF-5405 : The NTP configuration file "/etc/ntp.conf" does not exist on all nodes
rac2
PRVF-5414 : Check of NTP Config file failed on all nodes. Cannot proceed further for the NTP tests
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
=============================================================
What should i do to solve this issue?? Please help me ...

Hi,
I start the ntpd start the service in both node and done the CLUVFY.SH.
The output is below,
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
rac2 passed
rac1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 yes
rac1 yes
Result: Liveness check passed for "ntpd"
Checking NTP daemon command line for slewing option "-x"
Check: NTP daemon command line
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon slewing option check passed
Checking NTP daemon's boot time configuration, in file "/etc/sysconfig/ntpd", for slewing option "-x"
Check: NTP daemon's boot time configuration
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
========================================================================================
[oracle@rac1 ~]$ /u01/app/grid/oracle/product/10.2.0/db_1/bin/cluvfy comp clocksync
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@rac1 ~]$
================================================================================
I hope the problem solved. Am i correct??

Similar Messages

Error while installing Oracle 11gR2 64 bit on windows764bit

Hi,
I want to install Oracle 11g database on my system. I have downloaded setup files for that.
But while doing installation after 60% completed i am getting an error messagebox saying.
File Not Found c:\Oracle11g\product\11.2.0\db_home1\bin\orandce11.dll.dbl
However my installation path is diffrent and i am running setup files from desktop.
I am not getting why installer is pointing to that location.
Please help me out to solve this error.
Thanks

867289 wrote:
Hi,
I want to install Oracle 11g database on my system. I have downloaded setup files for that.
But while doing installation after 60% completed i am getting an error messagebox saying.
File Not Found c:\Oracle11g\product\11.2.0\db_home1\bin\orandce11.dll.dbl
However my installation path is diffrent and i am running setup files from desktop.
I am not getting why installer is pointing to that location.
Please help me out to solve this error.
ThanksMost common reason fot this kind of errors, the 2 downloaded files are not unzipped into the SAME target directory, you should check this.
Werner
Similar thread:
Oracle 11g r2 installation issue. ( "WFALSNRscvapp.ear" file not found)
answered by werner:
you can ignore these errors. See MOS Doc 1143124.1 (11gR2 Install orancds11r.dll orandc11.dll not found)
HTH
Srini
source:-Re: Install oracle db 11g r2 on Windows 7 Error this link)
Edited by: rajeysh on Jun 21, 2011 5:11 PM

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Error while installing oracle 9i(9.2.0.1.0) on Red Hat Linux 8

hi
friends,
i'm getting error while installing Oracle 9i(9.2.0.1.0). this eror was came when linking process was going on. Error is as follow.
"Error in invoking target install of make file"
/home/oracle/product/9.2.0/plsql/lib/ins_plsql.mk"
/home/oracle/product/9.2.0/precomp/lib/ins_precomp.mk"
/home/oracle/product/9.2.0/sqlplus/lib/ins_sqlplus.mk"
/home/oracle/product/9.2.0/network/lib/ins_oemagent.mk"
pls. help me what to do?
Dharmesh

See this :
I saw this error only in connection with Oracle 9i (9.0.1) installation.
Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
$ su - oracle
$ $ORACLE_HOME/bin/genclntsh
Created /opt/oracle/product/9.0.1/lib/libclntst9.a
$
After that hit retry in the error popup. This always worked for me.
(I was told that this also works for SuSE 8.0.)
Here is Oracle's official solution for Oracle 9iR1 or 9iR1 iAS on RedHat 2.1 Advanced Server:
http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html
from: http://www.puschitz.com/OracleOnLinux.shtml
Hope it help you
Basem

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Error While Installing Oracle 9.2.0.1.0 on Win 2003 Server

Hi,
I am getting following error while installing Oracle 9.2.0.1.0 on Windos Server 2003-
ORA-12546: TNS: Permission Denied.
Above error pops-up during database configuration phase. Oracle docs says- "Acquire necessary privileges and try again." But I am installing as administrator.
Thanks in advance,
-Sandeep

I can't tell you why this error is occurring but you are installing a desupported version of the Oracle database that may well not be supported on your version of the o/s.
Check the support matrix and metalink and see if you can install a supported product such as 10.2.

Error while installing Oracle 10 g

Hi ,
I've got following error while installing Oracle 10g.
Exception java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key Name occurred..
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key Name
     at java.util.ResourceBundle.getObject(Unknown Source)
     at java.util.ResourceBundle.getString(Unknown Source)
     at oracle.sysman.oii.oiii.OiiiCompInvEntry.getName(OiiiCompInvEntry.java:1601)
     at oracle.sysman.oii.oiii.OiiiCompInvEntry.getName(OiiiCompInvEntry.java:1566)
please help

Windows 2000 SP4
Installer run successfully .
But it generates error log file when installation begins and abort the installation with the following message
Abnormal program termination
an internal error has occurred .
please check the following files
C:\Program Files\Oracle\Inventory\logs\oraInstall2004-05-31_02-57-32PM.err
C:\Program Files\Oracle\Inventory\logs\oraInstall2004-05-31_02-57-32PM.out

Error while installing oracle apps 11.5.10

Hi all,
I have got errors while installing oracle apps 11.5.10. I have configured all the system parameters.
Unable ti complete instance configuration
RW-50010 error script has returned an error 1
RW-50004 error code received when running external process
Please let me know the solution
Thanks
Manikandan

You would get better answers if you asked in the correct forum.
LCM: 11i Install/Upgrade
Also, it would help if you looked at the logs to find the errors.

Error while installing Oracle Utilities Application Framework..

Hi all,
I am getting this error while installing Oracle Utilities Application Framework.
101124:094356 <info> Execute: C:\Program Files (x86)\Java\jdk1.5.0_11\bin\java -cp C:\TEMP\Release-FW-V2.2.0_rmb\spl\versions\Releases\FW\Release-FW-V2.2.0_rmb\FW.V2.2.0\data\bin JarVersionValidator C:\Hibernate_3.2.7_Win_O\hibernate-3.2.7.ga\hibernate-3.2\hibernate3.jar Hibernate-Version 3.2.5.ga
101124:094357 <info> Hibernate jar file C:\Hibernate_3.2.7_Win_O\hibernate-3.2.7.ga\hibernate-3.2\hibernate3.jar does not exists or version not correct.
101124:094357 <info> See Supported Platform Document for more details
the Jar file available in the directory specified and version is also correct.
I am new to this, will anyone help me out.
Need your help.
Regards,
Siva

It would help if you provided osme basic information like what version you are installing, what operating system, 32 bit or 64 bit. We may like to help but we are not mind readers.
If you happen to be installing one of the latest versions of the framework (CC&B FW 2.2 SP 8) there is an issue.
You may have to start off with hibernate 3.2.5 then run the framework installation.
This may not do a full install but you may find that only 1 or patches have not been installed and the issue is that these require hibernate 3.2.7
So go back and install the hibernate 3.2.7 and change the environment variables to point to the new version.
Re-run the framework installer.
You may get errors in that the patches that did not previously install properly cannot be installed.
This is because they have entries in the etc/installed_fixes.txt file.
edit the etc/installed_fixes.txt file and delete the patches that will not install.
re-run the installer now and the rest of the patches should now install
The 2 offending patches may be 9384543 and 9080333.

Installing Oracle 11gR2 RAC Problem: ASM disks

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
At the first time, I create VM rac1. While its OS Oracle Linux 5.6 is booting, initializing ASMLib Driver OK. I create 5 ASM disks successfully using the command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: OK
Because the hard disk space of rac1 is not enough to install Database, I create VM rac1 again with bigger hard disk space (30GB). I do everything the same with that at the first time. But this time, While OS Oracle Linux 5.6 is booting, initializing ASMLib Driver failed. I create 5 ASM disks using the same command:
[root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
Output: Marking disk "ASMDISK1" as an ASM disk: failed
But when I use the command:
[root@rac1 /]# /etc/init.d/oracleasm listdisks
Output: ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5
My questions are:
First, can the 5 disks "ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5" be used correctly in spite of Marking disk "ASMDISK1(2 3 4 5)" as an ASM disk failed ?
Second, how to fix OS Oracle Linux 5.6 so that initializing ASMLib Driver OK while booting ?
Thanks.

Folks,
Hello. The issue is solved by myself. Thanks.

Install Oracle 11gR2 RAC : Cannot remove directory bootstrap under /tmp

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a "
In order to fix the above error, I run "cluster verification utility" according to
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/cvu.htm I run the following command:
[ora11g@rac1 \]$ /home_grid/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Output:
/bin/rm: cannot remove directory '/tmp/bootstrap': Operation not permitted
./runcluvfy.sh:line 99:/tmp/bootstrap/ouibootstrap.log: permission denied
From the above output, we can see the directory bootstrap under /tmp causes the problem. The solution is to remove the directory bootstrap. I run the 2 commands:
[ora11g@rac1 tmp]$ rmdir bootstrap
Output: Operation not permitted
[ora11g@rac1 tmp]$ rm -rf bootstrap
Output: cannot remove bootstrap: Operation not permitted.
[ora11g@rac2 tmp]$ ls
Output: there is no 'bootstrap' directory.
My questions are:
First, does "cannot remove boostrap in rac1" cause that /tmp in rac2 could not be determine mount point ?
Second, can any folk help to remove the directory bootstrap under /tmp ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I have just run the 2 commands:
[root@rac2 \]# chown -R ora11g:dba /u01
[root@rac2 \]# chmod -R 775 /u01
ora11g is the user who installs the Grid and /u01 is the directory where Grid is installed and dba is the group.
I go back to Grid Installer Step 7 of 10 in rac1 and check again and see as below:
Free Space: Rac2 : /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available
Expected Value: n/a
Actual Value: n/a
The problem is not solved after run the above 2 commands in rac2.
In addition, I have run Cluster Verification Utility using the command:
[ora11g@rac1 grid]./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -r 11gR2 -orainv ora11g -verbose
Output: All of items for rac2 are passed. There is only one item for rac1 is failed as below:
Check default user file creation mask:
NodeName: rac1
Available: 0002
Required: 0022
Comment: failed
As we see above, the result of CVU command is not the same with Grid Installer step 7 of 10 (Installation Environment Verification):
CVU command doesn't find /tmp mount point problem for rac2 that Grid Installer does.
Grid Installer step 7 of 10 doesn't find user file creation mask problem for rac1 that CVU command does.
I have tried to find out whether creation mask failed for rac1 causes /tmp problem for rac2. I have changed the line "umask 002" to "umask 0022" for rac1 in each of the 3 files below and run CVU command each time for each file:
rac1:
/etc/bashrc
/etc/profile
/etc/csh.cshrc
But chang the line "umask 002" to "umask 0022" for rac1 in each of the above 3 files does not solve the problem.
My questions are:
First, why is the result of CVU command not the same with that of Grid Installer step 7 of 10 ?
Second, why change the line "umask 002" to "umask 0022" in 3 files can't solve creation mask problem for rac1 ?
Third, how to solve /tmp problem for rac2 and creation mask problem for rac1 ?
Thanks.

Fatal errors while installing oracle 10 r2 in RHL AS 4 update 5

hi
i am trying to install oracle 10 r2 in red hat linux AS 4 update 5.
getting these errors while installing....
1. Error in invoking target 'install' of make file 'u01app/oracle/product/10.2.0/db_1/ctx/lib/ins_ctx.mx
See '/u01/app/oracle/oraInventory/logs/installActions2006-07-24_04-50-34PM.log' for details.
2. Error in invoking target 'install' of make file 'u01app/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk
See '/u01/app/oracle/oraInventory/logs/installActions2006-07-24_04-50-34PM.log' for details.
3. Error in invoking target 'install' of make file 'u01app/oracle/product/10.2.0/db_1/rebms/lib/ins_rdbms.mk
See '/u01/app/oracle/oraInventory/logs/installActions2006-07-24_04-50-34PM.log' for details.
can anyone give a solution to this issue.

i had tried both, still the same...
tried opening the log file...
45PM/oui/jlib/oneclick.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/srvm.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/share.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/xml.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/emCfg.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstImages.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/help4.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/ewt3.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/classes12.jar::/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/jewt4.jar:/tmp/OraInstall2008-06-30_08-40-45PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oii.oiic.OiicInstaller
INFO: UnixGroups="{oinstall,dba,}"
INFO: -scratchPath
INFO: /tmp/OraInstall2008-06-30_08-40-45PM
INFO: -sourceLoc
INFO: /opt/database/install/../stage/products.xml
INFO: -sourceType
INFO: network
INFO: -timestamp
INFO: 2008-06-30_08-40-45PM
INFO: -oneclick
INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = /opt/database/install:/usr/bin:/usr/ccs/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
INFO:      CLASSPATH =
INFO: Username:oracle
INFO: This installation is being performed using response file /opt/database/install/response/ee.rsp.
INFO: This installation is being performed using response file /opt/database/install/response/ee.rsp.
INFO: Setting variable 'FROM_LOCATION' to '/opt/database/install/../stage/products.xml'. Received the value from the command line.
INFO: Setting variable 'ORACLE_HOME' to '/home/oracle/oracle/product/10.2.0/db_1'. Received the value from the command line.
INFO: Setting variable 'COMPONENT_LANGUAGES' to 'en,'. Received the value from response file.
INFO: Setting variable 'SHOW_WELCOME_PAGE' to 'false'. Received the value from response file.
INFO: Setting variable 'SHOW_CUSTOM_TREE_PAGE' to 'false'. Received the value from response file.
INFO: Setting variable 'SHOW_COMPONENT_LOCATIONS_PAGE' to 'false'. Received the value from response file.
INFO: Setting variable 'SHOW_SUMMARY_PAGE' to 'true'. Received the value from response file.
INFO: Setting variable 'SHOW_INSTALL_PROGRESS_PAGE' to 'true'. Received the value from response file.
INFO: Setting variable 'SHOW_REQUIRED_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
INFO: Setting variable 'SHOW_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
INFO: Setting variable 'SHOW_RELEASE_NOTES' to 'true'. Received the value from response file.
it's just a part of the log file viewed..

NTP(Network Time Protocol) Error whil installing Oracle 11gR2 RAC

Similar Messages

Maybe you are looking for