NTP not working on the SSL Daughter Card
Hello,
We are having an issue with NTP with the CSM SSL module (CSM-S). If we set our management router as the ntp server on the SSL daughter card, after a while it becomes unsynchronized.
If I set up the server it initially looks like this on the daughter card:
ddbusxl916(config)#ntp server 10.2.69.1 prefer
ddbusxl916(config)#^Z
ddbusxl916#sh run | include ntp
ntp server 10.2.69.1 prefer
ddbusxl916#sh ntp status
Clock is synchronized, stratum 4, reference is 10.2.69.1
nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**24
reference time is C8D48C72.3DB84313 (08:53:06.241 UTC Mon Oct 9 2006)
clock offset is -0.0056 msec, root delay is 258.48 msec
root dispersion is 16281.88 msec, peer dispersion is 15875.02 msec
It also shows that the device is synced with master:
ddbusxl916#sh ntp associations
address ref clock st when poll reach delay offset disp
*~10.2.69.1 10.244.15.1 3 0 64 377 1.0 0.16 0.1
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
Now after a couple of minutes if I look again I see:
ddbusxl916#sh ntp stat
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**24
reference time is C8D49200.DC73366F (09:16:48.861 UTC Mon Oct 9 2006)
clock offset is -612.3787 msec, root delay is 614.12 msec
root dispersion is 16527.33 msec, peer dispersion is 16000.00 msec
Although the router 10.2.69.1 is still set up as the master but no more synced:
ddbusxl916#sh ntp associations
address ref clock st when poll reach delay offset disp
~10.2.69.1 10.244.15.1 3 46 64 0 1.1 -619.9 16000.
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
Thanks in advance for any information you would like to share.
Cheers,
Murtaza
chek this configuration guide
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_configuration_example09186a0080216c16.shtml
Similar Messages
-
What happen when SSL daughter card fails?
I'm using two CSM with SSL duaghter card with redundancy.
What happen if the card fails? CSM fails too?
Thanks.
AndreaWhen the SSL daughter card failure is detected, the SSL daughter card is restarted causing all SSL flows to fail, and they will need to be re-established.
During a supervisor engine switch over, the standby CSM-S fails to initialize and the new standby supervisor engine prints the following message for all CSM-S ports:
%PM-STDBY-4-INT_FAILUP:GigabitEthernet7/2 failed to come up.No internal VLAN available -
I need help, i bought an itunes gift card but when i try to redeem my account it says invalid code. I even checked the code and i had it 100% right but its still not working. The shop in which i bought it wont take it back so i dont know what to do. Please help.
iTunes Store: Invalid, inactive, or illegible codes
-
My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?
Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE> -
GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?
GUYS MY iPHONE 4 IS NOT WORKING WITH THE SIM CARD IN ZIMBABWE,HOW DO I UNLOCK IT?
Only the wireless carrier that the iPhone is locked to is capable of unlocking it. You'll have to ask them if they will unlock it. Some will, some won't.
Hope this helps -
My brother have given me his I-phone3 But he lives in US he has given his phone in India The sim card is not working with the phone What should+I need to do?
Send it back to him and have him unlock the phone for you so you can use it with your carrier.
-
Ralink RT5390 Does Not Work on the UEK Kernel
We installed OL6.3 and Ubuntu 12.04 on a new Asus X45A notebook. It has a Ralink RT5390 wireless card. With Ubuntu, both wifi and video work flawlessly. However, the wifi driver (from elrepo) does not work for the the uek kernel (2.6.39). While the wifi driver works when boot into the RHEL kernel (2.6.32), it created an "even bigger problem" in that the video starts at about 1/10 from the left edge of the screen.
As a result, we can only boot into Ubuntu on this new notebook, but we would like to use the uek kernel. Any suggestion will be appreciated.Dude wrote:
It wouldn't surprise me if was more power efficient because half your hardware, e.g. wireless apparently isn't working ;-) I have three notebooks running OL6. Wireless works on all three of them. (One of the notebooks its wireless has problem with the UEK kernel, but no problem with the RHEL kernel.)
However, power management support means computer sleep and idle functions to slow down your computer's power
consumption when it is not needed, e.g. down clock your CPU and slow down your hardware, dim your screen, etc.
when running on battery, etc.This needs further verification, but all these functions seem to be working with OL6.
But again, please no one be fooled by my overly optimistic and simplistic comments*. The reality is, I am glad OL6 desktop works at all.
* For example, I actually installed OL6 on 4 notebooks, one of them "does not work" because I couldn't dim the screen. I did not intend to lie, but subconsciously, I somewhat forgot that there was this failed case.
Edited by: Ping-Wu on Dec 19, 2012 7:48 AM -
hi pls help me my iphone is forest i update but after my iphone is devices open is not working i click but sim card installed , attempting to activate this one coming pls help me answer me
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
my imac is not working well, the screen is flashing.I can´t open any program.there is a monsterflashing
Hello,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?
Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.
-
When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly
No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host> -
iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?
Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards. -
I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie. -
I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?
I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!
-
I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.
You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.
Maybe you are looking for
-
After months of struggling with BT Cloud, I have finally uninstalled the client from my pc and shelled out $60 for Carbonite backup. Why? Because I'm fed up with trying to stop BT Cloud from corrupting my Outlook 2010 pst files. It doesn't seem to
-
Error in discount amount in Purchase order PLD
Hi Experts, My client requirement is that they want to have the discount in amount wise like for eg i am giving discount 10% on 1000 rupees product where as SAP gives the value as Total before discount is 900 where as my requirement is to have 100 r
-
So I activated my new iPhone and then I was doing something on my old iPhone and it froze up. So I held down home and power to restart it and now it won't turn on. The apple comes up and stays for a while but then the screen just goes black. Any idea
-
Connecting to a different database
Hi, I need to retrieve the data from non-sap databse.Its an another ORACLE System. In our SAP also the back end is Oracle only. Now i need to retrieve all the data from a table which was in another DB.How to connect that. Can anyone help me in
-
[Wanted] Lenovo G580 - AC / DC Adapter?
Hi all, I'm after the AC / DC adapter for the Lenovo G580 and wonderd if anyone had a link to one that is confirmed as worked or even the OEM part, i've searched the net but there's so many mixed reviews I'd rather buy once and get it right. Thanks,N