NTP server - can't fix it
Hello,
I have two 10.6.4 server machines wich I use as NTP server for my clients (both referes to time.europe.apple.com and have flagged NTP under general settings to enable NTP).
One of them works properly: if on a client i use his FQDN or IP they took istantly the right hour.. the other one is like unseen from clients.
both of them have the following files configurations:
/private/etc/ntp.conf
server time.euro.apple.com
/private/etc/ntp-restrict.conf
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
#localhost is unrestricted
restrict 127.0.0.1
restrict -6 ::1
includefile /private/etc/ntp.conf
I can figure out why one of them works and the other one not..
Both of them have firewall service off.
Maybe if you tried to restore your computer back to a month ago or sometime before you had this problem?
Similar Messages
-
NTP server unreachable through ASA firewall
Hi all,
I've configured a DMZ switch to point to an NTP server on on the Inside, but I get a debug message on the switch that says:
NTP: <NTP server IP address> unreachable
I'm confident that the NTP server is configured properly, as there are more than a dozen other hosts using it, successfully. The difficulty here is that the NTP packets are having to flow from the DMZ to the Inside. I have a rule set on the firewall that permits the IP address of the switch to connect to the IP address of the NTP server as follows:
access-list intdmz1_acl extended permit udp host <IP address of switch> host <IP address of NTP server> eq ntp
I can see the hit counter on this rule incrementing.
The firewall can ping the NTP server, and the NTP server can ping the switch, so I think routing is OK.
Output from the DMZ switch:
switch#show ntp associations
address ref clock st when poll reach delay offset disp
~192.168.65.254 0.0.0.0 16 - 64 0 0.0 0.00 16000.
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
switch#show ntp status
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 119.2092 Hz, actual freq is 119.2092 Hz, precision is 2**17
reference time is 00000000.00000000 (00:00:00.000 GMT Mon Jan 1 1900)
clock offset is 0.0000 msec, root delay is 0.00 msec
root dispersion is 0.00 msec, peer dispersion is 0.00 msec
PRNLN-DMZ-SW01#sh run | inc ntp
ntp source Vlan138
ntp server 192.168.65.254
ukhvdc00vs01#sh run | inc ntp
ntp source Vlan65
ntp master 3
ntp update-calendar
ntp server 0.uk.pool.ntp.org
ntp server 1.uk.pool.ntp.org
PRNLN-DMZ-SW01#show ntp status
Clock is unsynchronized, stratum 16, no reference clock
nominal freq is 119.2092 Hz, actual freq is 119.2092 Hz, precision is 2**17
reference time is 00000000.00000000 (00:00:00.000 GMT Mon Jan 1 1900)
clock offset is 0.0000 msec, root delay is 0.00 msec
root dispersion is 0.00 msec, peer dispersion is 0.00 msec
Does the firewall rule need to permit more than UDP/123 for this to work perhaps?
NTPconfig on DMZ switch:
switch#sh run | inc ntp
ntp source Vlan138
ntp server <IP address of NTP server>
===================
NTP config on NTP server:
NTP_Server#sh run | inc ntp
ntp source Vlan65
ntp master 3
ntp update-calendar
ntp server 0.uk.pool.ntp.org
ntp server 1.uk.pool.ntp.org
Any guidance welcomed.
Thank you,
OllyHi Julio,
Hi Julio,
For the purposes of this information:
DMZ switch IP = 5.6.7.8
NTP server IP = 10.1.1.1
Here's the output from the show commands:
ciscoasa# show capture NTPCAPTUREDMZ
11 packets captured
1: 16:22:05.271500 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2: 16:23:09.276185 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
3: 16:24:13.274033 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
4: 16:24:57.272813 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
5: 16:24:58.279480 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
6: 16:24:59.277817 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
7: 16:25:00.275971 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
8: 16:25:01.275559 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
9: 16:25:02.272599 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
10: 16:25:03.279129 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
11: 16:25:04.277710 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
11 packets shown
ciscoasa# show capture NTPCAPTUREINSIDE
0 packet captured
0 packet shown
ciscoasa# show capture NTPASP | include 10.1.1.1
419: 16:24:13.274171 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
1820: 16:24:57.272904 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
1841: 16:24:58.279587 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
1876: 16:24:59.277909 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
1934: 16:25:00.276062 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2027: 16:25:01.275651 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2068: 16:25:02.272690 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2095: 16:25:03.279221 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2129: 16:25:04.277802 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2200: 16:25:05.275849 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2233: 16:25:06.274094 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2275: 16:25:07.273606 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2327: 16:25:08.280182 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2347: 16:25:09.277222 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2373: 16:25:10.275467 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2399: 16:25:11.273759 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
2414: 16:25:12.273347 802.1Q vlan#138 P6 5.6.7.8.123 > 10.1.1.1.123: udp 48
I'm guessing we should see some packets in the second capture, but we're not...
Does this help?
Thanks!
Olly -
I have a ipad mini and i have had it for less then a year, it says that i have perfect wifi up in the left corner where the wifi is always at but when ever i go into the built in safari it says that it is unable to connect with the server. How can i fix this because with out it connecting to the server or internet it is kind of useless to me. I do have ios7 if that helps
The wifi symbol only indicates the presence/signal strength of wifi. Not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have downloaded Disney HD tv shows to my son ipod touch, but when he goes to to watch it we get the following error message " or "cannot connect to the server" How can we fix this? Thank you
You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?
A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do. -
Trying to set up contacts on Windows7 PC. Get error message that "setup cannot start because iCloud server has stopped responding. How can I fix this?
Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo -
I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
ThanksHi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran -
I tried to switch on Netinstall on just on just brand new Apple mini server, all the data have filed and green light is on, except of Netinstall which requesting me to add an image and file in the library/netboot/ is empty for that. If even I try to add it on the NEtinstall page, there small gear tab blanked and cn not modified at all whatever I did, I have not modified any thing there - so that is suprice why on the new apple happening with me that, may be a problem in a software or I just don't know somne thing. On the apple support page also there is no information for OSX10.8.2 server how can I fix this problem, Could some one explain how is possible to finaly make an image and make netinsall to work, I will be much appreciated for that,
You need to create a NetInstall image using System Image Utility. You can launch it from the "Tools" menu of Server.app.
To use System Image Utility, you will need an installed volume, or an Install Mac OS X application from the Mac App Store. -
Every time I try to sign on it says that ichat lost the connection to the AIM account and the server connection was unexpectedly lost. How can I fix this?
Note For others.
For the Port Changes (or server names in some cases) you have to be logged out to make changes on the Server Settings pane.
9:41 PM Friday; October 28, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?
This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
fe80::1%lo0 localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry -
Everytime that I sign on FaceTime on my macbook pro, it says "the server encountered an error processing registration. Please try again later". How can I fix this so that I can use facetime again
Not a solution, but was able to login at work. Then when I got back to the hotel all was fine and it works now. Just will not change IDs I guess.
-
Can we make Nexus7009 as NTP server
Hi
Can we make Nexus7009 as an NTP server. Basically we are craeting one MGMT vlan with HSRP configured between two chassis. HSRP IP want to use as an NTP server IP .
is it possible and if yes , what will be the configuration for NTP?Hello
I have neve done this on an nexus however you can try the following:
Are you going to be pointing the 7k to an external authoritative time server and having you lan clients point to the 7K? - meaning do you still want this 7k be authoritative ntp for others even if itself ntp isnt sychronised to an external time source?
access-list 10 permit 192.168.10.0 0.0.0.255 ( internal lan ntp clients)
access-list 10 permit host 172.16.10.1 ( external time source)
ntp ccess-group peer accesslist 10
ntp server 172.16.10.1
tp source-interfface x.x.x.x ( managment interface)
Lan client ( 192.168.10.100)
ntp server(7k) prefer
res
Paul -
I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix the problem when it failed just today?
If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252) -
I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this?
If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252) -
My iPad 3 will no longer send mail. "The server does not allow relaying:. This happens on both cellular and wifi. It happens for all recipients. It does receive mail fins. How can I fix this?
Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works
Maybe you are looking for
-
New macbook pro wont send e-mail
hi. i bought a new macbook last weekend. i have a macbook pro already. i use mail on both thru a company called easyspace. i bought my own website and now i have a number of e-mail accounts on it. now my old mac sends emails fine. however when i ente
-
Wireless Router can't see other computers on network
I have a home network set up as follows: Cable modem connected to a VOIP modem then it is connected to a 8 port switch. I have 2 computers and a Linksys wireless router connected to the switch. The 2 computers can see each other on the network. Wh
-
when i download skype on my computer for the first time and when it started up it crashed i tired everything still will not work
-
Hi everyone, this is my first time posting, sorry. I am new to Flash, but I've got a general knowledge of it to help me discuss this question. I am trying to build a site that has a homepage with some images on it. The basic format of the site is bro
-
SDO_GEOR.importFrom : Unable to render RenderedOp for this operation
Contributors, I have trouble in loading a persistent LOB into a georaster : - I use sdo_geor.getRasterSubset to get whole cells (512x512) of band 0 of a 8BIT_U georaster, into a BLOB - dbms_lob.getLength of the blob gives me correct length : 262144 (