Ntp settings for CTS 1000 and CTS 3000

I installed a CTS 1000 and a CTS 3000.
They both use CUCM.
Now my problem is: When i capture a logfile from a CTS the date and time on the files in the captured logfile are not correct. i.e. x/x/2006.
When i go into the admin page of the CTS and go to the ntp settings it sais it can only be changed in the CUCM.
the phones connected to the CTS have the correct time.
What do i have to do to fix this?

1. Login to CUCM
2. Add NTP servers IP addresses under "System>Phone NTP Reference"
3. Go under "System>Date/Time Group" and add "Phone NTP References" you created
4. Restart all CTSs devices
CUCM should push device's config to TFTP server and upon Restart, CTS should download new config with NTP references. Login to CTS web administration and verify NTP server list under "System Settings".

Similar Messages

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?

    After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr

    Dear All
    i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
    than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
    in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
    Exception Tyle: EXC_CRASH (SIGABRT)
    Exception code: 0x00000000, 0x00000000
    Chrashed Thread: 6
    in thread 6: name: Dispatch queue:
    com.apple.addressBookUI.ContactsSettingPlugin
    and thaan a lot of data.
    Have you any idea?
    thank in advance
    Fabio

  • Strange info in "Bypass Proxy Settings for These Hosts and Domains"

    For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
    No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
    Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
    Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
    I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
    Thanks

    When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
    ... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
    In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
    If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
    Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network  and choosing to set up again.
    Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
    In this case, proxies are not an issue, and are simply a distraction from the real problems.

  • "current encoder settings for bit rate and sample rate are invalid" message

    I have some files I am working with. Details and what happened:
    Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
    Open the files in Quicktime Pro 7 to trim them. Exported to aif.
    Opened the files with itunes. They open and play just fine.
    In Itunes I click"create AAC version" to convert them.
    I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
    I don't know what to do from here. Suggestions?
    Thanks.

    Make sure that the AIFFs that you export are set for 16 bit PCM.
    Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

  • Making system settings for measurement documents and measuring point

    What is the significance of making system settings for measurement documents and measuring point in spro?
    Edited by: Pallavi Kakoti on Jul 14, 2011 1:23 PM

    Hi,
    << Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
    Regrds
    Jitender
    Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

  • Size settings for swing components and resizing of a JFrame

    Hi all!
    I'd have the following question:
    There is a JFrame, which content panel has the GridBagLayout. In some places on that layout's grid there are JScrollPanels (let's name each as "inner panel") with JTables in the view ports.
    When user resizes the main JFrame, I'd like that all inner panels and corresponding tables would resize synchronously: if user enlarges the main JFrame, then the sizes of all those components should increase proportionally, when user makes the main JFrame smaller, then all the sizes should become proportionally less.
    I am confused with the settings for max, min and preffered sizes for inner panels as well as for their JTables. I have read about those size attributes and tried to play with them, but I can't obtain the needed result :-/
    Each inner panel has the "BOTH" value for the fill attribute in the GridBagLayout's constraints.
    Might someone help me?
    Thanks in advance!

    Hmm...
    The JPanel that contains all stuff is the JFrame's content pane...
    The entire JFrame's content pane contains another panels (JScrollPanels), which are all set to fill all available space on the parent panel (JFrame's content pane) with "both" value of the "fill" attribute.
    Should I put the only one JPanel on the JFrame's content pane and all other stuff at that additional JPanel...?

  • TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

    Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file".  Any suggestions?

    Thanks so very much.  I chose MP3 and Download and it is working beautifully.  Have a wonderful day and it is so nice of you to get right back to me.  I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install.  Could hug you!

  • Settings for Item Proposal and Product Proposal

    Hi Gurus,
    How to do the configuration settings for Item Proposal and Product Proposal.
    I also want to know what is the difference between Item Proposal and product Proposal.
    Give me your Solution.

    Item proposal is the list of regularly/frequently ordered items of a particular customer. this will be useful when u are entering the sales order. it will be used to speed up the order entry process.
    For that Goto VA51, enter item proposal type as MS and sales area details.
    enter the customer name and the list of products and save. Assign the item proposal No in the customer master sales area data, sales tab.
    create the sales order  and enter the customer no and press the propose items button in the sales order.
    the system will propose one box and it will display all the materials. then u can continue further.
    Product proposal:
    To configure product proposal, Go to IMG,SD, Basic functions, Dynamic product proposal, Maintain all the settings
    **A product proposal is a list of products for a specific customer that is automatically proposed during sales document processing. You can decide for yourself which materials should be displayed as product proposals in the sales document. You can also determine the sequence in which the materials appear in the product proposal.
         During sales document processing, the system displays a product proposal in the item overview according to the customer and the business transaction. It displays the material number, material description, and historical order quantites in the sales unit last used. To use a material again, you just have to copy it. The system does not run the standard checks (pricing, availability, incompletion, material determination, free goods determination and so on) until you have entered the order quantities.
    The product proposal is both an entry help and an aid to sales support and promotions. It is particularly useful in Telesales, where the employee automatically receives a display of all the materials that are of interest to a particular customer. This helps them to provide appropriate advice to the customer quickly and easily. The sales document history enables you to analyse the purchasing behaviour of a customer and recognize early on if it changes, for instance, when the customer suddenly stops ordering a product.
    The product proposal differs to cross-selling in that it is dependent on the customer and sales area, and is displayed in the sales document as soon as you have entered a customer. Cross-selling, on the other hand, is triggered by a material. In other words, the system proposes cross-selling materials according to the material or a characteristic of the material you have entered.
    You can determine the product proposal from different data sources:
    Order history
    Listed materials
    Excluded materials
    Item proposal
    Customer-material info records
    Customer-specific data sources
    You can combine materials from these data sources to create a product proposal. The system then accesses the data sources either online or in the background.
    To define a product proposal for sales document processing, you must carry out the following activities in Customizing:
    Define customer procedure for product proposal
    Define document procedure for product proposal
    Assign document procedure for product proposal to order types
    Maintain table of origin for product proposal
    Define product proposal procedure and determine access sequences
    Maintain procedure determination (in background) for product proposal
    Maintain procedure determination (online) for product proposal
    The product proposal procedure determines how the system displays the product proposal in the sales document. For instance, if the system has accessed the order history, it determines how many columns should be displayed in the sales document, in which period intervals thehistoric order quantities should be displayed (for instance, day, week, or month), and most importantly, the sequence in which the system should access the data sources (for example, order history, listing, exclusion).
    The product proposal procedure depends on the:
    Customer determination procedure
    The customer procedure determines which product proposal procedure the system automatically uses when you create a sales document for a particular customer.
    It is specified in the customer master record per sales area.
    Document determination procedure
    The document procedure determines which product proposal procedure the system automatically uses for a certain document type. The document procedure is stored as a key in the header for the sales document type.
    If you use online processing, the product proposal procedure is determined according to the customer and document determination procedures.
    If you use background processing, the product proposal procedure is determined according to the sales area in the customer master and the customer determination procedure. It does not use the document determination procedure because the document type is not recognized in background processing.
    Difference:
    Item proposal is the list of products the customer used to buy frequently.
    Product proposal is also the list of products but it will explode in the sales order, once u enter the sold to party field. But this will be based on the following criterias.
    Order history
    Listed materials
    Excluded materials
    Item proposal
    Customer-material info records
    Customer-specific data sources
    Hope this clarifies.
    Reward points if useful

  • Settings for non-modvatable and modvatable taxes in img

    HI gurus,
    What are the settings for non-modvatable and modvatable taxes in img, and where shall we do them
    Ur reply is appreciable
    Pls send the ans asap
    Thanks in adv
    sri

    Greetings Martin,
    The default value for Maximum Time in Queue is 259200 sec OR 3 days. We'd recommend increasing this threshold to 345,600 seconds (four days) or 432,000 (five days) if necessary.
    Please remember changing this value will not affect existing queued messages. The drop dead point in time is attached once and resides with the message for it's life.
    Regards,
    Viquar Ahmed
    Customer Support Engineer

  • What are the settings for iPhone, iPad and iMac to sync ical and contacts?

    How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

  • What are the settings for apn data and mms for iphone 4 on straight talk?

    what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

    They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
    Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
    You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
    It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
    Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

  • OBYA Settings for Intercompany Customers and Vendors

    Hi SAP folks,
    I have a small question on TC: OBYA
    We have 2 co codes (CC10 & CC20) . We have customer and vendor account with the same number 900CC10 in Co Code CC20 and  customer and vendor account with the same number 900CC20 in Co Code CC10
    The requirement is such that if vendor invoice is posted in CC10 for vendor 900CC20 , then automatically customer invoice should be posted in CC20 for customer 900CC10 and vice-versa. Same logic applies if customer invoice is posted in CC20 for customer 900CC10 , then automatically vendor invoice should be posted in CC10 for vendor 900CC20.
    How should i configure these accounts in TC: OBYA.
    In OBYA....
    Co Code1
    Posted in CC10
    Cleared Against CC20
    Receivable                   Payable
    Debit P.K.                   Credit P.K.
    Acct debit                       Acct credit
    Co Code2
    Posted in CC20
    Cleared Against CC10
    Receivable                   Payable
    Debit P.K.                   Credit P.K.
    Acct debit                       Acct credit
    I shall appreciate if you can guide me. Do we also have to make settings for trading partner in the master data for customers and vendors.

    Hi Sumit,
    i've 2 CoCd INTA and IPW, where IPW as a customer INTA and INTA as a vendor for IPW.
    So IPW make Purchase Order to INTA and INTA make Sales Order to IPW.
    how to set automatic posting in OBYA ?
    Transaction BUV - Clearing between company code
    Posted in            INTA
    Cleared againts  IPW
    Receivable                                          Payable
    Debit Pst Key   ?                                 Credit Pst Key    ?
    Accoun debit   ?                                 Account Credit   ?
    Receiveable  Payable
    Posted in            IPW
    Cleared againts  INTA
    Receivable                                          Payable
    Debit Pst Key   ?                                 Credit Pst Key    ?
    Accoun debit   ?                                 Account Credit   ?
    Best regards,
    Korintus

  • Separate settings for MBP keyboard and aluminium keyboard?

    I just bought myself a Apple aluminium keyboard (USB) and have to say I'm loving it. However, there is one small hang-up.
    Basically, whatever key-commands I apply to the keyboard are taking from my MacBook Pro's keyboard settings and seem to have none of their own. I had gotten the impression that there was a stand-alone software to manage the keyboard but that does not seem to be the case as far as I can tell after about 30 minutes of searching the net and Apple's website.
    Does anyone know a way in which I can have one set of settings for my laptop's keyboard and another set for my aluminium keyboard?
    All relevant software updates, OS X 10.5.2.

    MBP keyboard mapping in Windows http://support.apple.com/kb/HT1220
    Usage of Microsofts Keyboard Layout Creator http://support.apple.com/kb/HT2587
    Multi Trackpad support in Windows http://support.apple.com/kb/HT4273
    Some gestures are simply not supported in Windows.
    Stefan

  • Quicktime pro settings for the Ipod and web.

    I was reading an article on creating files specifically optimized playback on Ipod and I also listed the video formats that are supported below. Below these settings are 2 questions that I have.
    H.264 video
    File formats: .m4v, .mp4 and .mov
    Video: Up to 768 Kbps, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3
    Audio: AAC-LC up to 160 Kbps, 48 KHz, stereo audio
    MPEG-4 video
    File formats: .m4v, .mp4 and .mov
    Video: Up to 2.5 Mbps, 480 x 480, 30 fps, Simple Profile
    Audio: AAC-LC up to 160 Kbps, 48 KHz, stereo audio
    Is it possible in Quicktime Pro to create one file that could be used for a website to download and view 30 minute videos in Quicktime as well as be available for people to download to their ipods?
    For the website I realize I would want to use the correct HTML protocol as well as the "Fast Start" features in Quicktime Pro for playback while downloading.
    If it is possible,what settings could be used to create this type of file that could be used for a website and ipod?

    I would still use the save as method to change the file extension. The default "open with" application for .m4v is iTunes, not QuickTime Player and not all users have installed it. Viewers know what a .mov file is. A .m4v may confuse them.
    Use the Export to iPod settings (nearly foolproof) and test the file so you're sure it plays in QuickTime and the iPod.
    Next use the Movie Info window to add "Annotations". These can be things like changing the "title", adding copyright notices, artist names and dozens of other things.
    Also set the movie "poster frame". This special frame shows as an image when, or if, you decide to use RSS feeds or Podcasts for the file.
    Now that you've edited the file you need to save it. A "regular" Save may not preserve the fast start properties. Using "Save As" will restore the fast start feature.
    Your viewers can either watch the file in the browser window or click on your other link and choose to save the file to their computer.

Maybe you are looking for