NTP synch issues

Hello all
Having an issue with NTP at my new location. Bit of background:
Access A Access B    Distro       Core
|          |    |          |    |          |   |          |
|          |----|          |----|          |---|          |
|______|    |_____|    |______|   |______|
So, there is an NTP server hanging off the core. No firewall exists between the NTP server and the core (it's within the LAN)
All devices above had the same NTP statements.
All devices can ping the NTP server
Access B, Distro, and Core show that NTP is working. They have associations, the clocks are synched, etc.
Access A is NOT synched.
I've gone line by line thru the NTP configs; they are identical on all switches (IP addresses changed):
ntp logging
ntp authentication-key 1 md5 happyday
ntp authenticate
ntp trusted-key 1
ntp clock-period 36029132 (these vary with device)
ntp source Vlan150
ntp access-group peer 30
ntp access-group serve-only 31
ntp server 10.1.0.1 key 1
ntp server 10.1.15.1
ntp server 10.2.50.100 key 1 prefer
I turned on all debuging for NTP. I can see that accessA is sending packets to the three time devices. I can see that the devices are sending NTP packets with the correct times and timezone back to AccessA. But AccessA is NOT associating:
AccessA#sho ntp ass
      address         ref clock     st when poll reach delay offset    disp
~10.1.0.1         0.0.0.0          16     -    64    0     0.0    0.00 16000.
~10.1.15.1        0.0.0.0          16     -    64    0     0.0    0.00 16000.
~10.2.50.100      0.0.0.0          16     -    64    0     0.0    0.00 16000.
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
I've tried to completely remove the NTP configs from the switch, and put them back in. No change.
I've tried to change the PREFER statement from 10.2.50.100 to 10.1.0.1...and back again..no change.
Like I said, all the other switches are having no issues. I even removed the accesslist for the management vlan just to ensure it was not blocking anything, and no change. Here is a sample of the debug output (ip's changed) Also note the *** in the xmit packets...
121708: .May 26 23:00:59.597 KBL: NTP: xmit packet to 10.1.0.1:
121709: .May 26 23:00:59.597 KBL: leap 3, mode 3, version 3, stratum 0, ppoll 64
121710: .May 26 23:00:59.597 KBL: rtdel 0000 (0.000), rtdsp 10001 (1000.015), refid 00000000 (0.0.0.0)
121711: .May 26 23:00:59.597 KBL: ref 00000000.00000000 (04:30:00.000 KBL Mon Jan 1 1900)***
121712: .May 26 23:00:59.597 KBL: org 00000000.00000000 (04:30:00.000 KBL Mon Jan 1 1900)***
121713: .May 26 23:00:59.597 KBL: rec 00000000.00000000 (04:30:00.000 KBL Mon Jan 1 1900)***
121714: .May 26 23:00:59.597 KBL: xmt D54CD363.99185907 (23:00:59.598 KBL Sun May 26 2013)
121715: .May 26 23:00:59.597 KBL: Authentication key 1
121716: .May 26 23:00:59.597 KBL: NTP: xmit packet to 10.2.50.100:
121717: .May 26 23:00:59.597 KBL: leap 3, mode 3, version 3, stratum 0, ppoll 64
121718: .May 26 23:00:59.597 KBL: rtdel 0000 (0.000), rtdsp 10001 (1000.015), refid 00000000 (0.0.0.0)
121719: .May 26 23:00:59.597 KBL: ref 00000000.00000000 (04:30:00.000 KBL Mon Jan 1 1900)***
121720: .May 26 23:00:59.597 KBL: org 00000000.00000000 (04:30:00.000 KBL Mon Jan 1 1900)***
121721: .May 26 23:00:59.597 KBL: rec 00000000.00000000 (04:30:00.000 KBL Mon Jan 1 1900)***
121722: .May 26 23:00:59.597 KBL: xmt D54CD363.9976DD46 (23:00:59.599 KBL Sun May 26 2013)
121723: .May 26 23:00:59.597 KBL: Authentication key 1
121724: .May 26 23:00:59.597 KBL: NTP: rcv packet from 10.1.0.1 to 10.1.15.17 on VlanXXX:
121725: .May 26 23:00:59.597 KBL: leap 0, mode 4, version 3, stratum 2, ppoll 64
121726: .May 26 23:00:59.597 KBL: rtdel 0050 (1.221), rtdsp 02A6 (10.345), refid D62D81AE (10.2.50.100)
121727: .May 26 23:00:59.597 KBL: ref D54CD087.C41E4772 (22:48:47.766 KBL Sun May 26 2013)
121728: .May 26 23:00:59.597 KBL: org D54CD363.99185907 (23:00:59.598 KBL Sun May 26 2013)
121729: .May 26 23:00:59.597 KBL: rec D54CD384.9A245D48 (23:01:32.602 KBL Sun May 26 2013)
121730: .May 26 23:00:59.597 KBL: xmt D54CD384.9A2EF734 (23:01:32.602 KBL Sun May 26 2013)
121731: .May 26 23:00:59.597 KBL: inp D54CD363.99F9E10C (23:00:59.601 KBL Sun May 26 2013)
121732: .May 26 23:00:59.597 KBL: NTP: rcv packet from 10.2.50.100 to 10.1.15.17 on Vlanxxx:
121733: .May 26 23:00:59.597 KBL: leap 0, mode 4, version 3, stratum 1, ppoll 64
121734: .May 26 23:00:59.597 KBL: rtdel 0000 (0.000), rtdsp 0012 (0.275), refid 464C5900 (70.76.89.0)
121735: .May 26 23:00:59.597 KBL: ref D54CD382.48C4F81B (23:01:30.284 KBL Sun May 26 2013)
121736: .May 26 23:00:59.597 KBL: org D54CD363.9976DD46 (23:00:59.599 KBL Sun May 26 2013)
121737: .May 26 23:00:59.597 KBL: rec D54CD384.9A828552 (23:01:32.603 KBL Sun May 26 2013)
N-LNK-DASCB-ASW-3750#
121738: .May 26 23:00:59.597 KBL: xmt D54CD384.9A887AEC (23:01:32.603 KBL Sun May 26 2013)
121739: .May 26 23:00:59.597 KBL: inp D54CD363.9A68E2E3 (23:00:59.603 KBL Sun May 26 2013)
As you can see, AccessA is sending packets to the timeserver devices. I MANUALLY set the date/time on AccessA. It is correct with the rest of the network. But you can see AccessA in the statements with the *** at the end is sending incorrect date/time info out. BUT, the time servers are sending back the correct date/time timezone info. And there are NO authentication errors.
Several of us are at a quandry on what's up. Any thoughts?

Duplicate posts.

Similar Messages

UCCX NTP Synch issue

Hi
I have UCCX 9.1 HA cluster, Primary and Secondary, I noticed that when the Primary lost the conectvity external NTP server (statum 16), Secondary also movinf to statum 16 in ntp status, my problem is Primary server is getting ntp from external but Secondary getting NTP from primary UCCX !!!, then how can Secondary moving to statum 16 ?
Regds
$

Your NTP stratum should be 1-9 on Cisco UC applications, so ensure that is the case by pointing to either Cisco network device or external device as MSFT servers cannot provide this.
Subscriber will always get NTP from Publisher.
HTH,
Chris

I purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be

i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.

You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

Synching Issues with iphone 4/ itunes

When attempting to synch my iphone with itunes, the synch cannot progress past the "backing up" stage. Why?? Getting a bit frustrated now to be honest.
Every time I plug my phone into the computer, itunes informs me of the latest update required (4.3.5), but because of the synching issue, I obviously can't get the new update.
any help appreciated

"iTunes could not back up the iPhone "Guru's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."
The above is the error message I receive when trying to upgrade/ synch my iPhone with iTunes on my Laptop. I have the latest version of iTunes available (10.4.1)

Audio synch issues in QT

My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?

The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps.

12 bit audio synch issues

Hey all. I have a queation regarding 12 bit audio synch problems. I have digitized a tape recorded with 12 bit audio and am just now coming into video/audio synch issues and was wondering if anyone might have a workflow suggestion. Soecific questions are -
1 - Can I export the troubled clips to quicktime/ resample them at 16 bit and reimport?
2 - Some of the clips I already have edited and are in synch, do I need to correct them as well or will final cut do that on export?
3 - If I get a 12 bit/16 bit mixed bag on my timeline, can I export the mix to 2 track and convert before exporting it to compression?
ANy suggestions on how to work through this would be appreciated. I seem to have a lot of people coming to me with this setting and would like to know of any viable workflow solutions.
Thanks

1. Yes. Quicktime Pro, iTunes or third party audio editing software such as Peak can resample to 48khz/ 16 bit.
2. It would be best if you can get everything in the timeline to be 48khz/16 bit.
3. See #2.
Dope slap these fools who bring you 32khz stuff. Charge them MUCHO extra for your time.
x

Audio Synch issue

Hi,
So I have a .mov source file that contains footage captured from a Sony MiniDV camera (don't ask me why we were still using that in November of last year) and I believe I possibly screwed up the capture settings. The footage is 50 minutes of uncut interview and the audio gradually falls out of synch so that by the end it's about a half to a full second slower than the video. We need to edit the file simply to trim the ends so we have a clean fade in and out.
Here's the info on the file as displayed by the Finder
I imported it into Premiere Pro CS6, put it onto a sequence, and clicked "change sequence settings" to match the clip settings.
Here are the resulting settings:
I unlinked the audio track and moved it so that the sound of the two people high fiving was synched with the video. I cut both the video and audio tracks at that frame, deleted what came after the cut, and moved the audio back to its original position. I then looked at the duration of the video track, and adjusted the duration of the audio track to match. The result was that the audio speed was adjusted to 100.03%, and appeared synched throughout the video.
I thought I had solved my problem; however, when I exported the video the audio went back to falling out of synch slowly, exactly as it does in the source file.
I exported it initially as Format: H.264, Preset: NTSC DV. Then I exported it as H.264, Youtube HD 720p 23.976. Neither worked. The sample rate for both was 48 kHz, so unless I am mistaken, that matched the rate from the source audio.
This is beyond my technical ability and I don't know where to begin fixing it at this point. I no longer have the tape that the footage was on so I can't recapture it. How do I synch the audio and video?
Any help would be much appreciated.
Thanks!
Collin

Yes, the second export that I tried was with the Preset that is YouTube HD 720p 23.976. I've done this before with DV footage and it works fine, all that happens is that there are two thick black bars on the sides of the video. I only did this for one of the exports on this particular project though. The first time I tried to export it it was with the NTSC DV preset, and the synch issue was still a problem. So it is independent of the pixel ratio.

Lip Synch Issue?

Is anyone else experiencing a significant lip synch issue when using an optical (sound) / HDMI (video) setup?
I've been experiencing this since the new iPlayer update on a black box a couple of months ago to some degree. It wasn't too bad, but I had the box replaced last week when it developed a hardware fault. It had the non iPlayer release (bliss!), but on Monday the new update was applied overnight. The sound issue has come back with a vengeance - a lot worse than before. This is the first time I have used the latest (new style) release. This is happening on live TV.
After almost 3 years of uninterupted stable service, this iPlayer nonsense has really got me considering ditching Vision...
Thanks, Mark.

Guyincognito76 wrote:
Urm? And why aren't you using HDMI for the sound as well, is the HDMI going into the telly and the optical into a surround?
If the Vision box is playing sound correctly if connected directly to the TV then it must be the surround.
It's connected to a surround sound receiver that doesn't have HDMI inputs (just optical and component connections). It's not the receiver that is the problem as it works perfectly with BluRay, Wii, and Freesat. It also worked with no issues on the Vision box have until the new software release was applied on Monday.
The BT engineer that came out to fix the fault with the previous bit of kit admitted that the hardware is very reliable, but the software releases have caused a lot of issues for them. A bit of extra testing would be good before BT ship these releases out to everyone.

MS Outlook 2003 and Iphone 2G calendar synching issues

hi,
I have just recently (after a very long IPhone download) am having synch issues. Some of my appointments are on the Iphone but not seen on Outlook. I read something about a com add in but when I tried to check this and add, my outlook didn't have this option. I am very aggravated!!!! I am in sales and have many appts during the day and now I am afraid I am going to forget one if i don't check both phone and outlook.. Please help!!!!
Janet

This is causing alot of problems no idea what percentage of windows users sync'ing with Outlook this is effecting but a lot of unhappy campers out there.
For a constantly updating discussion on this try an independent site:
http://getsatisfaction.com/apple/topics/myiphone_calendar_will_not_sync_with_outlook2007 Covers 2003 Outlook too. - (Scroll down to 16th July)
Apple although acknowledged the problem, now 2 weeks ago seem in no hurry to correct it, something to do with trying to sell MobileMe a cynic may say? Problem has mean't alot of businesses returning iphones, exchanging for Blackberries or just trying to revert back to their smartphones or ppc's.
This added to the problems of bluetooth handsfree kits not working with voicemail and 3G problems I suspect Apple are wishing they never released Firmware 2.0 and iTunes 7.7.
We are all hoping for a swift patch for this critical problem but then again we were doing that 2 weeks ago too... until then at least my XDA Orbit still works.
Repeating the appointment once so it is a reoccuring one day appointment has proved to work in the meantime - major pain though. I am testing Dionhall's fix at the moment, it sounds as if it is fixing the problem for most users. (See link above)
<Edited by Moderator>

Suddenly Comcast Sportsnet HD channel has lip synch issues

The past few days, Channel 577, which is Comcast Sportsnet New England in my (Boston) area, has lip synch issues. It appears to be the only channel with this issue, and the SD version of the CSNNE station (77) is fine. Since it is only this one channel I believe it must be something with the station itself, but I'm wondering if I can fix it myself somehow. Perhaps reset of the set-top box, or unplug and plug in the HDMI cable again? It's just this one channel, though, so I'm trying to avoid any changes of settings on my receiver, set top box or TV, etc.
Any ideas? Or should I just report this to Verizon's support line?
Thanks.

are you watching on a dvr? I've found sometimes that when I am watching on my dvr and a lip sync issue crops up, I can pause the show for 2-3 seconds and then press play (so I am watching it "delayed") and that solves the problem. Dont know why this works but it does most of the time for me. YMMV
====================================================================================
Error exists between keyboard and chair.

Synch issue with icloud

Hello,
I have upgraded to iOS5 last week (iphone4).
I have activated iCloud and chose to synch everything except mails and notes.
When I go to iCloud.com from my computer, I have :
- only 4 contacts in "contacts" while I have 300+ in my iphone
- nothing in calendar, while I have a lot in my iphone
- no "photostream" link, so I don't know how to see my pictures in iCloud.com
I have connected my iPhone to personnal wi-fi and to power during many days.
How can I solve this synch issue ?
Thx
Adrien

If you mean that a new reminder entered on one device doesn't show up on other devices then check that
1) The other devices are logged into the same icloud account and have reminders turned on (settings>icloud), and
2) that the remider is in the "icloud" group, and not in the "on my ipod" or whatever group.

Is there a patch for the NTP security issue that does not require Xcode?

Is there a patch for the NTP security issue that does not require Xcode? I have an older Intel mini that can't be upgraded beyond 10.6.8 and I currently don't have room for Xcode 3.2.5. Has somebody trustworthy posted these binaries?

NTP fix for Snow Leopard: https://drive.google.com/folderview?id=0BxQCbeIgpA2uVjFiN1h4bGZNQ2c&usp=sharing
You can also go to System Preferences/Date & Time and deselect Set time Automatically.
Snow Leopard users: Turn off automatic date and time in System Preferences immediately

Snow Leopard 10.6.2 - Time Synch Issue

Hi,
I have an older MBP that was just rebuilt with Snow Leopard. Everything is working fine but a weird issue I ran into which is the system time. The date and time is set in System Preferences for CST and using an NTP server. The displayed time is correct. Here is what I ran into and my attempts at troubleshooting.
Details:
1.Entourage displays message 6 hours ahead
2.Tried Outlook through Citrix on the MBP and the message times are off by 6hrs as well
3.Tried Outlook through Citrix with a different AD acct. Problem still exists.
4.Tried Outlook through Citrix on another system and the message times are correct
5.Tried logging in as admin on the MBP and tried Outlook thru Citrix. Problem still exists.
6.Played with Date/Time settings in System Preferences by changing zones and going back to CST
7.In Terminal, the time displayed after running DATE is off by 6hrs and shows it using UTC
8.I modified the NTP.conf file to use tick.usno.navy.mil and still see the time off running DATE in Terminal
9. Manually set the time. No success.
Any suggestions would be greatly appreciated.
Thanks,
Paolo

Not sure what your trouble is, but you might try these ntp command to get more info about time. I am guessing that ntp is fine, but that Outlook and Entourage are looking somewhere strange for the timezone information. I am using the ntp pool to get time...
In /etc/ntp.conf:
server time.apple.com
server 0.us.pool.ntp.org minpoll 12 maxpoll 17
server 1.us.pool.ntp.org minpoll 12 maxpoll 17
server 2.us.pool.ntp.org minpoll 12 maxpoll 17
server 3.us.pool.ntp.org minpoll 12 maxpoll 17
server 0.north-america.pool.ntp.org minpoll 12 maxpoll 17
server 1.north-america.pool.ntp.org minpoll 12 maxpoll 17
server 2.north-america.pool.ntp.org minpoll 12 maxpoll 17
# ... and use the local system clock as a reference if all else fails
# NOTE: in a local network, set the local stratum of one stable server
# to 10; otherwise your clocks will drift apart if you lose connectivity.
server 127.127.1.0
fudge 127.127.1.0 stratum 13
In ntpq, the "*" says which server is being using at the moment.
ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*time6.apple.com 17.72.133.55 2 u 563 1024 377 115.966 -10.589 154.758
ool-4a5827e8.dy 129.6.15.29 2 u 1085 68m 3 100.529 -29.152 30.756
ntp.yoinks.net 129.7.1.66 2 u 1048 68m 3 321.470 -124.26 127.291
lime7.adamantsy 66.96.98.9 3 u 1063 68m 3 357.534 -145.33 130.226
clock.team-cymr 192.168.0.16 2 u 1088 68m 3 274.057 -110.85 113.097
ntp1.housing.be 169.229.128.214 3 u 1077 68m 3 415.429 -157.87 157.765
72-9-108-133.re 67.128.71.65 3 u 1048 68m 3 266.445 -116.93 121.686
ntp2.housing.be 128.32.206.54 2 u 1094 68m 3 394.899 -155.73 146.651
LOCAL(0) .LOCL. 13 l 61 64 377 0.000 0.000 0.001
+wilmot.unh.edu 204.9.136.253 3 u 400 1024 377 42.159 -2.401 258.736
This trace is okay. Not all hosts allow traces to go through:
ntptrace
localhost: stratum 3, offset -0.004231, synch distance 0.329392
17.151.16.22: timed out, nothing received
ntpdc -c loopinfo
offset: -0.004231 s
frequency: -3.348 ppm
poll adjust: 10
watchdog timer: 841 s
checking your timezone:
ls -l /etc/localtime
lrwxr-xr-x 1 root wheel 36 Dec 28 16:22 /etc/localtime -> /usr/share/zoneinfo/America/New_York

Hot Synch issue-accidently synch with another person

Some help would be great. I accidently hot synched with a friend's computer. Now her name is at the top of my Palm screen when I try to hot synch, and also on my palm desktop hot synch. I am unable to hot synch anything. What should I do?? I tried to restart, and her name is still there. what do I do?? Thank you
Post relates to: Palm TX

Was this the first Hotsync you have ever done? There really isn't a way you can "accidentally" HotSync to another name. A blank device will trigger Palm Desktop to ask you "Create a New User" or "Use and Existing Account". You will have to pick one of the options. If you chose the latter and picked her name, then that's where all the info came from.
Hard Reset your device to start over again. When you HotSync to your computer, pick "Create a New User" and choose a name you wish.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

IPhone Outlook calendar synch issue

My new iPhone does synch with my Outlook 2007 calendar, but only some, not all, of the calendar items actually are copied over to the phone. When I create an event on the phone, it does synch back to the computer.
Any idea what's happening here?

Similar, if not same, issue here, as no calendar items come across from the computer. While I run both OSX and PC, the phone uses wife's Dell running XP pro, and it's still no joy. Running latest OS and outlook patches, etc.
I would expect coders are still working on a fix...bought the phone expressly for this purpose--while the other features are great, until this is fixed, it's a rather large thorn.
If the definitive steps to a fix are arrived at, I am all ears...

NTP synch issues

Similar Messages

Maybe you are looking for