NTP synchronized without NTP service

Dear,
We have a setup where 2 DC's receive their clock from a GPS clock. Then our 2 core switches (C3650 running on 15.0.(2) ) receive their clock from these DC's. It all seems to work fine. However, when I turn of the ntp service on both DC's our two core routers still remain synchronized. That is, when a look at the ntp association both peers keep their original state (i.e. sys.peer and candidate). Furthermore the ntp status also indicates that the clock is synchronized with the same stratum as before (referencing to on of the DC's). When I turn on debugging i do receive a ntp_receive message indicating that:
NTP Core(DEBUG): ntp_receive: peer is 0x00000000, next action is 3
I assume that this means that there's a problem with the peer seeing that normally the address is filled in and the next action is.
My question here. How come the two core switches still think they are synchronized? Does it take more time for the update (although i waited until they missed several poll intervals).
Thanks in advance,
Maarten

Hi ,
Please check the timezone on the acs server and make sure it is same as AD server. Use command "show timezones" to get the list of timezones.
Regards,
~JG
Do rate helpful posts

Similar Messages

NTP services "authorization"?

I have recently enabled NTP on a G5 Xserve with Mac OS X 10.4.8 Server. I have a firewall rule in place to allow this server to use time-c.timefreq.boardrdoc.gov through our corporate firewall as a time server from outside of our corporate campus. (This is the same time server that the Windows servers are using.) I have ten or so workstations and a couple of other Mac OS X servers pointing to the Xserve for network time for testing. When I first set this up, all the workstation seemed to be getting their network time just fine.
Unfortunately, at some point last week, two or three days after setting it up, the Xserve simply stopped putting out the NTP services even though it's still checked "on". On my workstation, for example, I would see a message similar to this in my System.log:
Apr 9 08:37:28 WORKSTATIONID ntpdate[97]: no server suitable for synchronization found
My computer did start to drift a bit off the corporate network time. I did a search here in the Discussions and found that, like some other folks, it seemed I had two ntpd processes running on the server. The second process was initiated by the /System/Library/StartupItems/NetworkTime/ folder. I put it in the Trash and restarted the server and for two days everything was fine. The Xserve was serving up network time for the clients. However, there are now five ntpd services running on the server and it is not serving up network time for the clients pointing to it.
It seems that the Xserve is demoting itself or de-authorizing itself as an NTP server if it doesn't get a "quick" reply from it's own time server (I would find a message in the System.log similar to the one above). If I change the network time option on the server to point to an internal time server and restart the server, it then becomes a valid time server for the clients who do catch-up to network time. But, if I leave the server pointing to that external time server (I only have access to that one through the firewall), after a couple of days the Xserve gives up and stops serving network time for the clients pointed to it.
Does anyone have some general time server advice for my Xserve? Or advice about keeping the service running? Or restarting the service without having to restart the server while I'm testing different options?
-Doug

I previously made a post on this issue and got some feedback. Needless to say after reading about others dealing with what is a neglected issue by apple I think I have a fix that works. I have setup my network this way for about 2 months now with no kerberos drift problems and all seems well in NTP land.
It is fairly simple just DON'T turn on the update time setting on the server. That means in both the SA under "Date & Time" and/or under System Preferences the "Set date & time automatically" should NOT be checked on the server! The only thing that should be on is in SA is the NTP check box. Now how this effects which time server you are syncing to i.e. time.apple.com etc. I'm not sure. I assume I'm using the last server listed as the entire in the "Set date & time automatically" box. I'm sure you could also edit the ntp.conf to set the correct server on your own as well.
Anyway since I have done this my Mac OS X Server time has stayed right on and all my clients point to my Mac OS X Server to get there time on the LAN. I have a JPG screenshot with VNC to the server and a client from my Laptop. In the screenshot the top most date & time is the client. The middle D&T is the Server and the bottom is my laptops. As you can see all 3 times are in sync. Both my laptop and I believe the server are both getting the ntp time from time.apple.com. The client is pointed to the server. On the Mac OS X server only 1 ntpd process is running as it should be. The only thing I can't seem to verify is the system.log on the server I don't see any ntpd entries but the time is right on. On the client log shows fine "13 Apr 16:18:43 ntpdate[3753]: step time server 192.168.1.2 offset -0.907011 sec"
I hope this helps.

ISE 1.1.2 patch 8 NTP Service failing

Hi all,
after a recent upgrade of my ISE deployment from 1.1.1 patch 3 to 1.1.2 patch 8, the NTP service on the ISE now crashes at regular intervals.
Can I have some help debugging this issue? I would like to check the logs but there are so many that I am not sure which one to turn debugging on.
Also, just wanted to know if anyone has seen this issue before or knows if this is a known issue when runing 1.1.2 patch 8.
Thanks everyone!
Mario

You cannot install a patch whose version is lower than the patch that is currently installed on ISE. Similarly, you cannot roll back changes of a lower version patch if a higher version is currently installed on Cisco ISE.
For NTP Configuration, you please check the below link
http://www.cisco.com/en/US/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html#wp2267226
http://www.cisco.com/en/US/docs/security/ise/1.1.1/upgrade_guide/upgrade.html

NTP Service on Domain Controller have problem with cisco switch

Hello!
I have Windows Server 2008 R2 SP1 Domain Controller with NTP services
The windows opertion system clients get NTP time ok.
There are problem with cisco switch, can't get time from NTP.
Can anybody help me to fix problem?
C:\Users\Sysuser>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 1800 (Local)
MaxPosPhaseCorrection: 1800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NTP (Policy)
NtpServer: 10.7.0.4 (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Cisco config and errors
CISCO1#show ntp ass det
10.7.0.7 configured, insane, invalid, stratum 3
ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
precision 2**6, version 3
org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
filtdelay = 6.06 5.87 3.23 7.90 6.41 5.17 13.03 3.43
filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
filterror = 0.02 15.64 31.27 46.89 62.52 78.14 93.75 93.78

Hi,
>>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
Based on your description, we can try to grant this account Allow log on locally
user right in the default domain controller policy to see if it helps.
The policy setting is:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Ntp service depends on dns but is started too soon

Given servers defined in /etc/inet/ntp.conf, the service starts interactively (svcadm enable ntp) with an initial ntpdate call to set the clock.
However, this fails on boot up as the servers are not found unless defined in /etc/inet/hosts. As a consequence, there can be a significant initial offset from the RTC, which corrupts the clock drift value and takes hours longer to stabilise.
This implies that the ntp service is being started too soon before dns whereas it should be started after dns.

I would check to see if this is still true in the most recent releases of Solaris Express. If it is, you can log a bug about it.
For your existing machines, you could probably create a dependency on milestone/name-services for the ntp service and see if that fixes it.
Darren

NTP Service in CCM v 7

I had to change the NTP server due the time. change how do I reset the NTP services on ccm 7?

You can use the command "utils ntp restart".
Hope this helps.
Brandon

Which Cisco router for NTP service

Hello,
I'm looking for deploying NTP service for multi-customer (in Datacenter).
So, I take a look at Cisco routers list and I saw that some router doesn't have hardware-clock / internal-clock ; for example 2600 series.
I'm looking for a "cheap" but good solution to provide NTP :
- "Cheap" : that's why I take a look at routers, and not directly NTP appliance.
- "Good" : something that can provide time to 300+ end-devices.
Cisco 800 series got hardware-clock, if I read good. But this is the cheapest router, so I don't feel confident.
> What's the "best" router for NTP server ?
> Please, could you share your experiences, opinions ?
Thanks,
Have a nice day.

Cisco 800 series apparently got internal clock, could it do the job correctly?
Rick and I have answered this question already.
Depends on the router, you can instruct the router to regularly update the hardware clock using the command "ntp update-calendar".
If you really insist on a router, an 800 router, then you can get all your device to sync to your router and your router gets sync somewhere in the internet.
Make sure you have the following commands:
ntp server <NTP server>
ntp update-calendar
Note: You can have multiple NTP server IP addresses. And the command above are hyperlinks.
Warning: DO NOT be tempted to use the command "ntp master".

Where can I buy a NEW iPhone WITHOUT a service plan?

I have an iTouch now, I'm sell it.
I want to have external speakers for apps and alarms.
I do not want iTouch 2nd generation.
I do not currently need it as a phone, but would like to have it for when I am ready.
Is it possible to purchase the latest iPhone without any phone plan? When I go through the steps to purchase an iPhone from apple.com it doesn't have a "no plan" option.
Do other places online / B&M sell iPhones or only apple.com and apple stores? (I do not want a used or refurbished)
Surely I can still get a hold of an NEW iPhone without a service plan... but where and for how much?

You can't buy a new iPhone in the US without a plan. Even if you could buy one, it would not work (even as an iPod) until activated with a cell phone provider. You would have to buy a used iPhone that had been activated. Be sure to get a US model (or one for your country if you aren't in the US). Check the part numbers in the right column of
<http://support.apple.com/kb/HT1937>
to make sure it is the correct version for your country.
An officially unlocked one from one of the countries that sell them would also be OK, but any repair would have to be done in its original country. It would have to have been activated in some country, also.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

Consuming Synchronous RESTful Web Service with PI

Dear experts,
i have a scenario for consuming RESTful web service.
i have followed all the steps showed in the following link for configuring my interface.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/08/11/calling-synchronous-restful-web-service-with-pi--i
but still i am facing issues at the communication channel level, the trace of the communication channel is as follows
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.MessagingException: org.apache.axis.ConfigurationException: adapter is null org.apache.axis.ConfigurationException: adapter is null at com.sap.aii.adapter.axis.modules.HandlerCore.process(HandlerCore.java:60) at com.sap.aii.adapter.axis.modules.HandlerBean.process(HandlerBean.java:86) at sun.reflect.GeneratedMethodAccessor602.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at com.sun.proxy.$Proxy3284.process(Unknown Source) at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264) at sun.reflect.GeneratedMethodAccessor544.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at com.sun.proxy.$Proxy646.process(Unknown Source) at com.sap.aii.af.app.listener.AFWListenerBean.onMessage(AFWListenerBean.java:422) at sun.reflect.GeneratedMethodAccessor558.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at com.sun.proxy.$Proxy603.onMessage(Unknown Source) at com.sap.engine.messaging.impl.spi.ServicesImpl.deliver(ServicesImpl.java:362) at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1091) at com.sap.engine.messaging.impl.core.queue.consumer.RequestConsumer.onMessage(RequestConsumer.java:75) at com.sap.engine.messaging.impl.core.queue.Queue.run(Queue.java:1017) at com.sap.engine.messaging.runtime.MSWorkWrapper.run(MSWorkWrapper.java:58) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
i have also attached screen shots of module tab of my SOAP(Axis) adapter
regards,
sushant

Hi Sushant
Check the question 11.I am getting org.apache.axis.ConfiguraitonException: adapter is null in this note 1039369 - FAQ XI Axis Adapter
(you will find all the answers in the attachment section)
Regards.

I want to know if the blackberry can still be used without the service

hi guys,
I want to know if I can still use the Blackberry on its own without the Blackberry service such as email, Internet etc? And also can I still use the texts and calling on a Blackberry without the service?

In addition to what bewaarse said, you will not be able to use MMS either (they require data).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can i use my iphone 4s to play games, surf internet and such without phone service? It says i need a sim insertwed to activate it.

recieved phone from a friend. I believe it to be a iphone 4s. I dont know from which carrier it originated CDMA or GSM.Turns on and begins setup. I enter my language and location , it begins to search for a wifi signal which is present then it says insert a valid sim card and it wont go any further than that. It tries to activate but then just says insert valid sim . I just want it too boot up so i can play games, apps, and surf web without phone service. Is that possible? I knowe it is because i used to do it with my wifes iphone 4s

You need a sim to activate an iPhone. The sim does not have to associated
with an active account; however, if the iPhone is locked to a wireless provider,
the sim must be from that wireless provider. Borrow an appropriate sim from
a friend/relative/co-worker for the few moments it will take to activate the iPhone.
You will need a sim in the iPhone to reactivate whenever you restore the iPhone
or update the iOS.
Call Apple to find the origin of the iPhone. You will need the serial number from
the back of the iPhone. Or ask your friend - he should know the details about an
iPhone he previously owned.

Running Distributed Transactions in RAC without DTP service.

We just switched over to our standby database this morning which we had setup to facilitate our ASM migration. The switchover went smooth and the standby is up and running now as my primary.
This is a 2 node rac on linux itanium 10.2.0.3.
I got the following message in the alert log on both instances and I have never seen this message before in my original clustrer?
Running Distributed Transactions in RAC without DTP service.
Is this a reason ofr concern?
Thanks, any feedback is very much appreciated.

Duplicate thread..
Re: Running Distributed Transactions in RAC without DTP service

Oracle database on windows without oracle service

Hi Gurus,
I noticed that one oracle database exist on Windows server without oracle service.
Is this possible to create a database without service on windows server?
What would be the next step to create a service for the existing databse.
Please help me out on this.
Thanks,
Dasarath

user12273645 wrote:
Hi Anand,
Can we create a oracle service for already running database? If so can you please guide me how to perform.
Thanks,
DasarathIf your service does not exists or not running its mean your database actually is not running.Create new service using oradim for example
C:\Documents and Settings\chinar>set ORACLE_SID=SB
C:\Documents and Settings\chinar>oradim -new -sid SB -intpwd sm -pfile D:\oracl
e\product\10.2.0\admin\SB\pfile\init.ora.51200910857
Instance created.
C:\Documents and Settings\chinar>sqlplus "sys/sm as sysdba"
SQL*Plus: Release 10.2.0.2.0 - Production on Fri Aug 27 10:57:55 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to an idle instance.
SQL> startup pfile=D:\oracle\product\10.2.0\admin\SB\pfile\init.ora.51200910857
ORACLE instance started.
Total System Global Area 159383552 bytes
Fixed Size                  1288292 bytes
Variable Size              62916508 bytes
Database Buffers           88080384 bytes
Redo Buffers                7098368 bytes
Database mounted.
Database opened.
SQL>

Hi, On opening organiser on Elements 12, I get " Online services could not be initialized. Please reinstall. Press ok to continue without online services" And I can't open Editor

'Hi, On opening organiser on Elements 12, I get " Online services could not be initialized. Please reinstall. Press ok to continue without online services" And I can't open Editor. Where do I go to to reinstall and how??
Message was edited by: Taylor Cosson

What computer operating system are you using? If Windows go to:
C:\Users\99jon\AppData\Roaming\Adobe\Online Services
Inside the Online Services folder delete the Photoshop Elements 12.0.0 folder.
Re-launch Organizer and OLS should get recreated.
N.B substitute your user name for 99jon. If you can’t find AppData you may first need to enable the showing of hidden system files.
Follow these steps to display hidden files and folders.
Open Folder Options by clicking the Start button, clicking Control Panel, clicking Appearance and Personalization, and then clicking Folder Options.
Click the View tab.
Under Advanced settings, click Show hidden files and folders, and then click OK.

NTP synchronized without NTP service

Similar Messages

Maybe you are looking for