NTSC audio to PAL ?

I had an NTSC video converted to PAL, but I just realized that there was a slight glitch in the original audio. I have a short timeframe so sending the video back out isn't an option. I was hoping that I could output the audio seperately, but when I do the audio slowly drifts out of sync. I'm guessing it's because of the different frame-rates and how the video was converted to PAL. So basically I'm wondering if there's a setting in FCP or compressor to convert the audio to PAL or if I need to manually slow down the 29.97fps NTSC sound by a certain percentage to get it to match up with the 25fps PAL video, similar to slowing down sound to match up with telecined film. Any help is appreciated.

Export the audio as an AIFF file from FCP. You can then convert it in Compressor to Dolby ac3.
The audio file is neither PAL nor NTSC. If it was 32' 26" long, for example in one format it must be the same in the other.
You should check that both your NTSC and PAL video files have exactly the same duration, otherwise the standards conversion was not done correctly.

Similar Messages

How to convert NTSC audio to PAL?

I have converted my PAL video to NTSC but the audio was mixed separately and so it's still set at 25fps and hence becomes out of sync when I lay it against the video track.
So how do I convert the separate audio.aiff files from 25fps to 30fps?
Thx
Kevin

Hi Jim,
Wow right in front of me!
Though when I save it as a .wav file FCP still gets it at 25fps but if I save it as a .stap file it came in as 30fps.
Cheers
Kevin

NTSC vs. PAL: asset question

Hoping this will be a trivial question for someone, since my DSP 4 documentation doesn't seem to have much to say about it...
I'm planning to produce a series of DVDs whose content will consist of a large number of video assets (2000+). Currently, these assets are in NTSC MPEG-2 format, with corresponding audio assets in either AC3 or AIFF. My question is: what do I need to do in order to produce a complimentary series of PAL DVDs with this content, given that DSP doesn't appear capable of importing NTSC video assets into PAL projects directly?
Now that I'm on an Intel-based machine, I've sent in my upgrade fee for the latest version of Final Cut Studio (which of course includes DSP), so I'll have that at my disposal. Does this software provide a batch-friendly means for me to do what I'm attempting, or do I need additional tools?
TIA for any advice.
PowerBook G4 Mac OS X (10.4.8)

You will need to convert NTSC assets to PAL assets to do it properly (including menus). Compressor does conversion and there is also other software, such as www.Nattress.com, which does conversion.
The quickest (but may not be best) is to run the assets in bulk through Compressor (but this will also depend on whether you have the Final Cut files still).
2,000 video files is daunting, so try to stay as organized as possible
Also as an aside, more people who use PAL (ex-U.S.) have the ability to play NTSC as compared to the U.S. which is more NTSC centric, so you may want to keep that in mind depending on the project, the audience and whether you will need a PAL version.

How to convert my NTSC project to PAL?

Hi! I'd like know how i can convert my ntsc project into PAL.
I need finish a DVD for my client take to ANGOLA and there is PAL system.It is possible? My Encore is 2.0.
Or It is possible put my NTSC movie into PAL project and let encore transcode the movie? Thank you very much and sorry my english.

You have several options.
1 - Create a new PAL project in Premiere Pro. Capture your footage in the usual manner, and as soon as it is in the project, hit the ENTER key to render it.
2 - Create an NTSC project in Premiere Pro, capture to NTSC DV footage, and export it out again.
Close project.
Create new PAL project, import the NTSC clip & then interpret/conform the footage to the project settings.
3 - Set up an NTSC project, capture footage, export to PAL DV or MPEG-2 from Premiere.
4 - Use TMPGEnc Xpress 4 - it's standards conversion is very good.
5 - Use ProCoder, as Ruud suggests
6 - Use CCE SP if you have it.
I'd try as many different ways as you can, and view the lot to see what looks the best.

Burning NTSC movie on PAL disk

I decided to burn NTSC movie on a PAL disk using IDVD. The computer warned me about my action but I decided to go through with it and I got a surprise. The first DVD came out O.K but when I inserted another blank DVD for another copy, the IDVD encoder hung up and created a frisbee.
The next step I took was to transform my NTSC movie to PAL (Changed frames/s from 30 to 25) before using IDVD and choosing PAL disk. My IDVD menu movie clips were left in NTSC format, by mistake, and there was no computer warning. This time after burning two DVD's the third was a frisbee when the encoder crashed again. Each time I had to restart the computer.
Has anyone experienced the same problem ?
Is this a problem with software or my Mac ?

Not sure about the NTSC/Pal issue, but you might create a disk image and then burn a DVD-R. I use Verbatim exclusively.

Changing the Videocamera Framerate from NTSC (30fps) to PAL (25fps)

When I am using the IPhone4 videocamera (with ios4.2.1) ... the framerate is something between 23.999 til 30 frames. That is very horrible for european and australian users because there is the PAL standard of 25fps valid. If you transform movies with a framerat of 30 to 25 frames, the movie looks very ugly. The picture jumps because of lost pictures through the transformation.
A videocamera without a option button for NTSC (30fps) or PAL (25fps) is for people out of NTSC Country very useless. Why doesn't fix Apple this? Evere simple Videocamera in a Handy has this option. HD 720 helps in that case nothing.

glad I could help... you're welcome...
Apple is letting the side down with it's intuitive software on that front!
... hmm, I'm pretty sure, they spend hours in a sweaty conference room, discussing "but widescreen isn't NTSC, HiDef isn't NTSC - so it HAS to be called by its fps!" - "but NO ordinairy user knows the framerate of its homevideo!" - "yeah, but the new formats are not standard, so it's not NTSC!" - "yeah, but a US video is called NTSC, that is standard" - "but what about Japan?" - "..."
finally, the "enigneers" won.. technical correct, but for you and me.. cryptical.
thanks for The Big Green One

HD NTSC to Anamorphic PAL question

I have compressed a 1280 x 720 HD NTSC sequence into an H264. Now I'm converting it to PAL through Compressor. And to try and maintain the 16.9 Ratio I'm trying the Settings : HD NTSC to Anamorphic PAL. But I don't know if it will come out "Squezed" and if in Europe they have TVs that "unsqueeze" the image? I don't know either how a 16.9 image looks in 4,3 in case I have to redo the conversion? Does anybody have any experience or knowledge in this, and could help me?
Thank you very much.

Thank you Nick, I hear you. Unfortunately I'm up against 2 obstacles: time and money. This is a (very) limited budget operation, and I can only send up to 2 Gb via YouSendit to several places in Europe, instead of a DVD via Fedex. But I will follow your advice of redoing the conversion to PAL at the source of 1280 x 720, and then compress the resultin PAL via H264 ( ProRes 422, which I tried, was too big) to end with a less that 2Gb file hopefully.

Converting ntsc dvd to pal for web

hi , i am based in uk and I have a dvd that apparently is ntsc as it plays in my dvd player and says ntsc region, it plays on the computer to.
I want to take small segments from it to convert to web format , add titles etc and upload to youtube.\
trouble is i cant rip the files to use in final cut pro, tried media streamclip but that produces jerky unusable files with random drop out and colours
I then thought play it realtime into fcp , it will play going by a firewire into capture and i see it but when capturing it stops every few seconds saying there is dropout I unchecked report on droped frames, and abourt on dropout. and capturing without deck control. i then tried to go through my dv camera but that doesnt see the picture only the sound.
I thought I could copy the dvd but it wont work either on my dvd recorder or with toast.
any suggestions how I can do this? does it need converting first if so how?
I am only using a few minutes of at least 90 minutes of footage .
thankyou
ade

>Maybe worth a feature request for CS5?
God in heaven - NO!
As Joe just pointed out, these are 2 completely different TV standards, running on different frame rates at different resolutions.
The results of attempting this "on the fly" with menus etc would very closely resemble a dogs dinner.
>I would therefore guess that you are stuck with copying the menus and other such assets into a new Encore project for each output format.
That won't work.
NTSC is 720x480, PAL is 720x576. They have different PAR as well.
If compliance is what you need, then design your menus in Square Pixels at 720 x 540, and resize the image (in PS) to the required TV standard before importing into Encore. 16/9 is worse, as you need to use different designs for each TV standard. There are no short-cuts.
Asset preparation should be done
i outside
the authoring application, never
i in
it.

Ntsc Dvd to Pal m

Hey there guys,
I just finished editing a dvd on imovie 4/ idvd. I would like to send a copy of this dvd to a friend in Brazil. Can anyone recommend how I transfer this ntsc dvd to pal m for brazil?
Thank u for taking the time to read this.
aaron

As QuickTimeKirk points out, just send your DVD. I have never seen a PAL DVD player that doesn't play NTSC discs. And just add a TV that isn't older than 10-15 years and you are OK.
The opposite is harder: Only the latest NTSC DVD players and TVs can play PAL discs.
For commercial ("Hollywood") discs you must also consider region codes, but that isn't an issue for discs you create yourself.

Converting NTSC footage to PAL with compressor 4

Hello, Please can some angel help.
I have PAL and NTSC footage. I want the end output to be PAL.
I have compressor 4. What settings, step by step do I select to change the NTSC footage to PAL.
There is info. on the web all relating to old versions of compresor where there seems to have existing a helpful NTSC/DVD setting where compressor made it clear the setting you needed. This is not an option on Compressor 4 so I am hitting a brick wall.
I would greatly appreciate some advice here.
Thank you
Nicola

What formats are your source files? What format (aside from PAL standard) do you want your output file (s) to be?
Russ

Creating NTSC DVD from PAL VHS input

I have a PAL VHS tape that I have just captured in AVI format using a Canopus ADVC-55 bridge. The settings I used in PE10 were DV PAL (as I am in Australia). I am now going to produce a DVD of the footage for use in Australia, but I also need to send a copy to my cousin in the USA, where they use NTSC. The whole PAL/NTSC process confuses me somewhat and I would appreciate some guidance.
1. If I create a PAL DVD for viewing here, is it right that it won't play in a DVD player in the USA? If it won't, can I create a DVD with output settings NTSC even though the input setting was PAL?
2. If I don't create a playable DVD as output, but instead just create an MPEG file and burn the MPEG file to a DVD to be read on a PC, will it read on a PC in the USA?
3. Should I recapture the footage, setting the ADVC-55 to NTSC (rather than PAL), and the project settings to DV NTSC? I have tried this and it seems to work, much to my surprise, as I thought the VHS tape itself was in PAL format and hence would not capture with NTSC settings.

Although most PAL DVD players will play NTSC video -- you are correct that virtually no US NTSC DVD players can play PAL video. And that's true whether you burn a DVD file or an MPEG to a disc. It's a different aspect ratio, resolution and frame rate.
But you can use Share/Computer/AVI with the NTSC DV preset to output an NTSC DV file of your project. Then you can start up an NTSC DV project, load that file into it and burn an NTSC DVD from that.
It won't be perfect. But the program does to a pretty good job of interpretting your video from one format to another.

Can Compressor convert my NTSC video to PAL?

I am trying to convert my NTSC footage to PAL. I was given a tip that the key is in the compressing stage and then use Studio Pro and burn a PAL DVD. Is this correct?
Thanks so much!!!! it really helps!!!

i saw you on the other forum.., you got fobbed off to this one.., actually you can 'convert' to PAL in both DVD Pro and Compressor..,
if you can use either at all you already know it.., do you know where the settings are in compressor.., (is your compressor working??).., an you load settings and assign a sourse and a destination.., if you ca do those things you can already 'convert.'
what ever, assuming compressor is working on your puter, open compressor and save a project name (give the project a name.) now in the
hit 'add file' (the icon, top left)
go to the settings/destination window (the window that covers the bottom left of your screen)
click the triangle that says 'apple'
click the triangle that says 'DVD best quality 120 minutes (if thats how long you want it.., as long as your movie is under this time your OK)'
drag that setting to the long strip in the window above (top right), check the sourse so you know where the file is going.
look in the inspector window and click the icon, second from the right, this is your encoding settings.
click, video format; change the setting to PAL.., check the frame rate has changed to 25fps
back at the window, top right, you will see 'submit.'.., hit that and it will send the job to the render window.., watch the magic
the same can be done from the inspector in DVD pro.
if this was too confusing, sorry, .., there must be some tuts somewhere.., try 'larry jordons' web site, or maybe 'peachpit.com'..??
M:)

DV-NTSC Project to PAL DVD

Here is what I intend to do:
Create a copy of the project file project_pal.fcp
In project_pal.fcp change easy setting to DV-PAL
Export sequences to quicktime
Use compressor to convert to DVD ready files
Author DVD w/ DVDSP
My questions are:
Where in here to I need to change any additional setting to make the DVD PAL ready? Is there anything in compressor or DVDSP I need to change or will exporting from a PAL project get that done?
Thanks!

Converting from NTSC to PAL is not a trivial bit of transcoding. There are disparate frame rates as well as different frame sizes. You can't just drop in a NTSC file in a PAL timeline and get good results.
There are three good ways to do it.
1. Purchase and use Graeme Nattress's Standards Convert plug in to convert the NTSC timeline to PAL on export within FCP.
or
2. Use Compressor's Advanced features to convert the exported NTSC file to PAL.
or
3. Take the file to a post house that can do a hardware based standard conversion.
Once you have the file in a PAL format, author a PAL disk and burn it within DVDSP.
Of course, the disk should be region free.
x

Help - NTSC Anamorphic to PAL Anamorphic ...?

I have NTSC footage which I export with the settings below and which work fine.
My question is about PAL export. What settings do I used for PAL
in terms of frame rate, canvas size etc etc...?
Unfortunately I have no PAL monitor so can't test it. :s

You need to convert from NTSC standard to PAL.
The cheapest way is using Compressor, take a look at the article below:
http://www.macworld.com/article/49306/2006/02/marchcreate.html
However, a great solution is [Nattress|http://www.nattress.com/Products/standardsconversion/standardsconvers ion.htm]

Converting h264 720p ntsc footage to pal DVD for a client and get no audio.

Hey,
I tried dropping the rendered video into the encoder first and then tried to render from the h264 timeline to a new PAL DVD file directly and neither one has audio.
Is there something I am missing?
Windows 7 ultimate
8 core AMD R9270x graphics card (Open Cl working great for rendering now)

Most DVD players can handle both PAL (Europe and other countries) and NTSC.
No practical method to change the frames per second rate without introducing other problems.

NTSC audio to PAL ?

Similar Messages

Maybe you are looking for