NTSC or PAL to Flash CS3
Hi,
I need to edit a movie and place it in an Flash document.
When I want to purchase the movie I have to option to download it in NTSC and PAL or HD
The HD has 29,97 fps -> so NTSC
I am in a PAL-country so the logical choice is to download a PAL version.
I have a theorie but don't know if this will work.
If I do download the HD version and edit this in Premiere Pro CS3 and export it with the NTSC settings. I will have no loss in the movie.
But if I import it in Flash CS3 and export the movie will I have quality loss?
I think not because the movie will be shown on a computer screen.
I hope somebody can help me with this.
G.
One of the advantages of Shooting with a PAL camera is that you don't have too many frame rates to worry about and no pull down is needed.
You can shoot PAL (50 fields per second as opposed to NTSC 60 ) at 25frames ps (or better 50fps, talk to your DoP about this) edit easily with FCP on a PAL timeline and eventually convert to NTSC using [Nattress Standard Converter|http://www.nattress.com/Products/standardsconversion/standardsconvers ion.htm] or Compressor 3.
However, there are a couple of things you can take into account:
1)most DVD players nowadays can play both PAL and NTSC (Not all though)
2)If you are used to a specific workflow stick with it or do some tests before you take any decision.
You could shoot with a PAL camera and edit a few minutes in FCP, do a standard conversion with Compressor then encode and import the asset in DVDSP to burn a DVD to see if you are happy.
Testing is a crucial step of the work and hiring the camera for half a day will cost you much less than a rushed decision.
Best,
G.
Similar Messages
-
Rendering HD Video Correctly for Flash (CS3 version)
Hi everyone,
For the LIFE of me I cannot figure out what the "magic selections" are for converting my HD video into a flash mp4 video are. I can get the mp4, but flash doesn't like it.
Before I continue, here are the specs:
Programs:
Premiere Pro CS3
Flash Professional CS3
Equipment:
Canon XHA1s HD camcorder, recording at 1080p @60i
Problems I am facing:
I can convert using the H.264 codec to create a HD mp4 file, but flash will not play it.
My Workflow:
Okay, I will start from the beginning.
-I start a new project in Premiere.
-I select "HD1080i 60i" as my format.
-I capture video off of the camcorder in premiere.
-The video looks great, and is definately in HD quality. I pull the captured video into my source pane, then set my in and out points.
-I insert those points into my program pane.
-I export my video using adobe media encoder.
-I select H.264 as my format.
-I select a custom preset.
-I make the size of my frame half the size of the original file.
-I set the framerate to 30.
-The TV standard is set to NTSC.
-Then I open Flash CS3.
-I follow the tutorial exactly given by Tom Green on this webpage: http://www.layersmagazine.com/hd-video-in-flash-professional-cs3.html
-When I preview my video file, an error message pops up saying that the URL has to be an fla file!
Ugh...
ALSO my files are absolutely HUGE!!! this file for instance became about 86 megs!! Is there any way to downsize without loosing a huge amount of quality?
SO...if you want to try to correct me, be my guest. OR if you just have a way of doing it that works please, do share! I'm getting pretty frustrated with this thing...
Thanks in advance!If you're trying to create a flash video, you need to create an FLV not an MP4. While H264 is readable by the latest versions of Flash, the normal extension for h264 Flash is F4V. MP4 in CS3 is primarily used to create blu-ray or perhaps XDCam files.
Why not output FLV and be done with it?
dennis -
Hi guys,
I'm shooting a tv show for MTV tr in New York City and since it will air in Europe it has to be set in PAL so I am unsure on how to deal with the settings.
I have NTSC 24fps footage that needs to be edited. My question is when I start a new project in Premiere CS3 should I choose NTSC or PAL or should I start editing in NTSC and convert it to PAL?
Second question, when I import the footage in Premiere which, is located in my external hard drive with usb 2.0, the video seems jerky or choppy on the camera movements such as panning and any fast camera moves. Do you know how or where I can adjust this problem? Could it be that my project was shot in 24 fps and the new project file fps is 29.97? I didn't change any fps settings in the new project, so I assumed it's automatically 29.97.
My computer:
Windows XP
2.80GHz Pentium D CPU
2.00GB RAM
Third question, should I render my project and burn a DVD or does it render when you burn a DVD automatically?
Can anyone please help me with this?
Thank you so much!
FiratFrom what you have described and looking at the specs I feel there is little chance of your program being accepted for television anywhere.
Need some answers...
What camera was used to shoot the footage at 24fps? Is it DV or HDV?
Why did you not choose a project setting of 24fps rather than 29.97?
Why did you use USB to transfer files rather than Firewire?
Capturing USB sort of indicates that your camera is DVD or HDD based and using Mpeg files which CS3 doesn't like, nor do TV stations.
Don't worry too much about burning a DVD until you work out if the footage is editable. -
DVI to Video adapter switches from NTSC to PAL
I just bought an apple dvi to analog video adapter to connect my mac mini to my tv.
It worked like a charm the first time, but seems to reset for no reason from ntsc to pal output. This is really annoying because the pal output is nearly impossible to read, making it painful to switch it back. It's weird because it boots into ntsc just fine and the login window looks good. But as soon as I log in from either account, it opens in pal. When I change it, it will change back over night.
I tried using both composite and s-video plugs. The TV is a sony wega xbr (US).I assume you have the previous generation mini even though you have posted in the forum for the newer one. The newer one wouldn't work at all from the adapter you describe. Anyway...
...OS X's display preferences files may have corrupted somehow. Especially since it worked before and now it doesn't. That really sounds like a problem with the configuration of the Mac.
In /Library/Preferences is a file called com.apple.windowserver.plist. Navigate your way to it and throw it in the trash. Also, in your main user account (folder with your name on it) under ~/Library/Preferences/ByHost will also be found a file com.apple.windowserver.xxxxxxxxxx.plist where the xxxxx is a hexidecimal string. Throw that file in the trash, too. Now restart.
When OS X restarts and finds those files missing from their expected location, it creates fresh copies with default values. This will give a clean start with any attached display. -
DVD Footage for FCP Edit - how to tell if NTSC or PAL?!
Hi all, apologies if this seems like a stupid request but I have a job at the moment calling for me to extract footage from a DVD, edit in FCP, add a few bits from Motion etc., but I can't work out if the DVD is NTSC or PAL!
I intend to extract the video (no issues with copyright) via DVDxDVPro but am unsure if the DVD has been encoded in NTSC or PAL. The footage it contains is from both the States (NTSC) and South Africa (PAL) so how do I tell? I don't want to go through a standards conversion if I can help it.
I am keen to try to retain as much quality as possible (client can't provide tape) so also any thougts on the best output from DVDxDVPRo for FCP editing?
Thanks all,
Best wishes
MichaelHi Thomas, that's it!
Thanks for this - it clearly shows the TV standard and the resolution plus 4:3 etc., so everything I needed for confirmation.
Glad I cheked because it was in Pal - thought the conversion in DVDxDVPro looked a bit ropey.
This realy baffled me - seemed so simple but couldn't find a way to tell the standard. Learn something everyday...
I am using DVCPro for export from DVDxDVPro - anyone thoughts on a better option?
Thanks again for the answer - and so quick on a Sunday too!
Kind regards
Michael -
How do I use a Flex swc in Flash CS3?
My engineering team has used Flex to create a nice little swc
for me to use inside of Flash CS3, but now I'm having trouble
finding any documentation on how to actually import it. Placing it
in the Components folder doesn't work, as it's not recognized by
the Components window (either as an AS2 or AS3 swc). Is it even
possible to use swcs from Flex in Flash? Thank you very much for
the help.
-- JeremyUse these links
Modular Applications
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f22.html
Creating Flex Libraries
http://help.adobe.com/en_US/Flex/4.0/UsingFlashBuilder/WS6f97d7caa66ef6eb1e63e3d11b6c4d0d2 1-7fe6.html
-Pramod
http://www.flexmycode.com -
Problem with FLVPlayer in Flash CS3 (need to save out as Actionscript 3.0 SWf file)
I am using Flash CS3 and am trying to publish a SWf file that
makes use of the "FLVPlayback" component. I need for this SWF file
to be published as an Actionscript 3.0 file, so I have set my
publish settings to Flash Player 9.0 and Actionscript 3.0, but keep
getting an error as follows:
"WARNING: The component 'FLVPlayback' requires ActionScript
2.0."
Has anyone encountered this?? I am doing something wrong? I'm
pretty comfortable within Actionscript/Flash 2.0, but am only
beginning my first steps into the relam of CS3 and AS3.
I have also attached a screenshot of the files that represent
my FLVPlayback component (or so I assume). (see this link for
attachments
http://www.actionscript.org/forums/showthread.php3?t=140886)
Thanks all,
Mark
http://www.actionscript.org/forums/showthread.php3?t=140886Mark,
> I have set my publish settings to Flash Player 9.0 and
Actionscript
> 3.0, but keep getting an error as follows:
>
> "WARNING: The component 'FLVPlayback' requires
ActionScript 2.0."
Gotcha. You must have started the document in AS2, then
changed the
publish settings. Each version of the language has its own
version of the
FLVPlayback Component (written in the relevant language).
Start over and
compare two compleley new FLA documents: make one for AS3 and
one for AS2.
Open the Components panel and note the differences between
the two. There
are a different set of Components depending on the language
chosen for the
document. Drag the FLVPlayback Component from the Components
panel in an
AS3 document, and you'll have the AS3 version.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Follow up from Real Pro thread - NTSC and PAL and AVCHD and FCE
Interesting topic line but can I just check one thing out from PAL land.
With an HD/AVCHD camera it is not recording in either PAL or NTSC as this is a analogue mode - so the issue issue of format is only relevant if i playback on a analogue TV. We have a digital tv so i record on AVCHD, deal in that format in FCE and burn to DVD (not sure in what format) play on DVD player through the digital TV.
If that is all correct then why do the manufacturers, in my case Canon HF10, talk about an NTSC and PAL version and then price differently - comparing the spec sheets from the Canon site I can see no difference. Am I missing something?Hi Tom
The thing i was trying to establish was whether really there was a difference (other than price ) in the so called versions of the Canon HF10. The specs are exactly the same. My assumption is that as the cam records in AVCHD unless you intend to play back thro a PAL or NTSC TV (bearing in mind most European PAL sets play NTSC as well) it makes no odds which camera.
My plan- and this is what I need to check - is to record and import into FCE taking your advice not to record in the highest quality to save rendering on import. After editing can export through FCE to PAL or NTSC DVD version for playing on TV.
Does that sound right
PS I have found your book on FCE very helpful to date !!!! -
Error embed / insert Flash CS3 9.0 swf in Acrobat 8.1.2
Goal: embed Flash swf file in Acrobat pdf.
Software: Flash CS3 9.0, Acrobat Pro 8.1.2, Mac OS 10.5.2 (all updates applied as available 3/27/08). If it matters: Quicktime Player 7.4.1. All swf files are associated to open with Flash Player 9 (9,0,115,0).
Hardware: PowerMac Dual 2GHz G5, 9.5 GB RAM
Error Description: This error is seen on 2 out of 3 PowerMacs; the 3rd PowerMac will inexplicably work. Here is what is done to receive error: Open pdf document in Acrobat. Select Movie Tool from Advanced Editing Toolbar, choose swf file from Desktop (pdf file is also saved on Desktop to eliminate network considerations). All defaults are retained in dialog window, when "OK" is pressed, status message "Initializing authoring system" appears and remains indefinitely. "Cancel" is pressed and produces following error message window: "Cannot create the movie annotation because the movie could not be loaded. This can occur if the file cannot be found or the URL is unreachable (make sure proxy server settings are correct)."
Adobe Support claims Leopard incompatibility with embedded Quicktime 7.3.1 (I have updated to 7.4.1). Also, AS recommended file association of swf to Flash Player exclusively. Have taken all actions recommended...still have problem.
Anyone have any ideas?I believe that the latest version of QuickTime which you no doubt have installed does not support the latest version of Flash (9.0). Since Acrobat depends on QuickTime for multimedia in Acrobat 8 Professional, this feature breaks.
What needs to happen is for the next version of Acrobat to support Flash directly, not using QuickTime. -
Quicktime movie export from Flash CS3 is skipping frame.
When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
> -
How to add special characters in Flash CS3
Hi, i need the help of some flash guru… these last weeks we were working with cloversites.com to build a community website… the interface is awesome etc etc however we in Malta have eight special characters (GCZ with a dot on top of them and an H with a second strikethrough). Those at cloversites wrestled with the problem, they could see the characters on their computers but when they entered the text in the site, flash couldn't render the special characters. Here is their message:
I am extremely sorry about this, but we were unable to add in your characters. We attempted to add them into our software but they did not work. We worked on it all morning and realized that we need an extra add-on for our keyboards. Adding special characters is nothing new to us and have answered this request for many of our international users. For some reason, the Maltese characters did not work in our sites. For example, our "option-G" is the copyright symbol so it will need to be transferred over to international characters.
Unfortunately, we thing that this has to do with Adobe Flash CS3. The software allowed me to embed the characters, but we were unable to render them on the web. Which led us to think it had to do with the version Adobe is running and its inability to render the text through its software on the web. None of the characters worked on the web, and it looks like its just an Adobe bug. So we are able to type and use the Maltese characters, but Adobe Flash is having trouble with them.
Does anybody know of any possible solution?see if codepoints-to-string() is suitable for you ..
Re: how to concatenate hexadecimal value to string in XQuery in PS Message Flow -
Where can I check to see if project has been imported in NTSC or PAL?
I have been importing DV tapes from both NTSC and PAL DV camcorders and I think I may have made a mistake on a take and recorded an NTSC tape in PAL. I can't find anywhere that tells me if my projects are in PAL or NTSC. Does anyone know how I can check?
Thanks
Kevin[email protected] wrote:
...I tried what you said but it only gives me the option to see codecs under 'more info' when I view the info on the thumbnail files and then it still doesn't tell me if it is Pal or NTSC. When I right click on the file in the finder the only info I get is that it is a DV Movie....
.... ooops..
in case you own QTpro or the free tool Mpeg Streamclip, open file, hit Apple-I and read in the info framerate/fps: 25=PAL, 29.97=NTSC.. -
How to create a comment form in Flash CS3
I am trying to create an add comment form in Flash cs3. I
have the background design and the text input areas and sub mit
buttons. But how do I get the submit button to add the comment to a
different area in the same flash file? My inputs and buttons are on
the left side of the stage and my display comments is on the right
side of the stage. How do I connect the two?The user types something into a text input space and when the
user then uses the submit button, you want that same, user entered,
text to display in another, different, text area? If that's the
case then make that second text area a dynamic textfield and set
its text property to the text property of the input text
space. -
How to creating a web banner in Flash CS3?
Hi all,
I'm very new to Flash CS3. Can anyone give me a step-by-step
instructions on how to make a banner for a web-site? Or a link were
i can find step-by-step instructions?
I have googled it but found no real help. I have tryed
"Youtube" hoping to even fine any one (most likely a child) with
directions on how to do this. Funny thing is that it seems most 8
year olds are better at Flash CS3 than I am & i'm 45.
Anyway, if you can help please make it simple or for the
simple minded. :)
Thanks to all!!
BJI understand your pain...I just posted a similar request
earlier today for help but finally figured it out on my own. I've
done lots of searching online and used Adobe's Flash Classroom in a
Book and also took an online ed2go class and I still don't have a
good handle on Flash. Nothing seems to give clear step by step
directions on animating images for web banners. You just have to do
a lot of trial and error. These websites may help if you don't have
time for the classes:
http://www.smartwebby.com/Flash/default.asp
http://animation.about.com/lr/flash_animation/150331/1/
mek113 -
How to develop a search engine in flash cs3
Hello Friends,
I need a small help in developing Search Engine in flash cs3.
I am going to develop a search engine in flash. But i dont have any idea on how to do this... so can anyone pls help me out. Any links/steps/code
would be really appreciated.
My goal is to develop a search engine in flash which should work more or less like google.
Regards,
RajeshWhat is your definition of search engine? What exetend of similarity to Google you are planning?
Maybe you are looking for
-
JMS Message Selector on Message Payload
Hi, I have a requirement where in; A JMS adapter consumes messages from an AQ JMS Topic. We need to make selective dequeue from the Topic. Is that possible to make use of the message selector option on the 'message payload'? Message selector works on
-
Mac OS X Server v10.6 Snow Leopard - Webdav setup?
Could someone give me a run-through on what is needed to set up webdav or a link to same? On this server, I've got groups with shared folders, and users who can access at least one group each. I'd like to be able to have the users get web access to t
-
Outlook calendar entries all gone!
I have done some searching on this and this seems to be a common problem, but I didn't find any solutions that worked for me. I realized today that nearly all of my Outlook calendar entries are gone!! I have the Desktop Manager set to two way sync.
-
Double-Clicking Excel 2004 Docs Won't Open Them
Odd problem, not sure if there is a work-around: I am using Excel 2004 which seems to work perfectly otherwise. When I double-click an Excel doc (.xls), it will open Excel itself, but the document will not load. The only way I can open an Excel docum
-
Hi All: I work in BW and trying to write routines and having difficulties in internal tables. I have Internal table 1 and internal Table 2 with purchase order as key field.For the same orders I need some fields from table 1 and some from table 2 to f