NTSC/PAL conversion question

On my vacation I took a lot of video clips with my digital camera, and made them into a movie. However, some of the people I want to send a movie to are in Europe/Africa, and need to view it in PAL format. When I made the movie, I did it in NTSC, format. When I transfer to iDVD, do I need to change the format in iMovie or in iDVD? If I have to do it in iMovie, do I have to completely redo the whole thing? Or is there a way to just convert the present NTSC version to the PAL version? If so, how? (I solved by lack of hard drive space by getting a new hard drive placed in my Power Mac-now have 100GB).

Hi dianeh,
most many/all dvdplayers over here are able to
read/playback NTSC dvds... no problem at all...
second:
export whole project as QT dv stream (1h = 13GB)...
import that into JES Deinterlacer, for free
http://www.xs4all.nl/~jeschot/home.html
choose conversion NTSC>PAL
another 13Gig per hour....
import THAT into iDVD
burn PAL version.......
hope I could be helpful
Tank you-I'll give it a try!!

Similar Messages

  • Nattress NTSC To PAL Conversion Question

    Is there noticeable difference in quality loss when using the Nattress Standards Conversion plug-in?
    I'm assuming that if NTSC is 720 x 480 and PAL is 720 x 576, then Nattress has to 'stretch' the 480 to 576... right?

    I've only done the conversion from PAL to NTSC with Graeme's conversion plugin, but it (and all my other Nattress effects experiences) have been excellent...
    Patrick

  • NTSC/PAL conversion workflow

    After years of working with hardware converters (the best of which I don't have available to me anymore), I'm now always playing with various software conversion methods. I know Compressor 2 works okay but is terribly slow, the Nattress filters are good and faster and I've just started playing with JES Deinterlacer which seems useful.
    Anyways, a co-worker here with an Avid and Procoder says he can capture as NTSC (DV or whatever) and just export a PAL MPEG to make a PAL DVD without an additional conversion step. I havent' looked at his results yet, but he said it looks fine and didn't take much longer than if there had been no conversion.
    So I started wondering why you can't do this with Compressor. And actually, it seems you can. Edit in FCP in one format, then create a custom MPEG-2 preset in Compressor in the other format and work just as you would otherwise. I just did this once and it worked fine though there seems to be quite a bit of jaggies when viewed on my cinema display. I don't have a multi-standard monitor in front of me right now, though I will later and will check it there.
    So, the question is, what technically is the difference between this method and using a better (but slower) converter like Nattress or Compressor 2 Format Converter and what sort of quality difference should I expect? And does anybody know how Procoder compares using this or other workflows?
    I work at a large university and occasionally need to do these things. Normally we're originatin in DV and usually just outputting to DVD, so often there's no need for a DV to DV conversion.
    Thanks much to Graeme or anyone that has any insight into this.
    Doug

    Hi Graeme. Thanks for the response. But do you know what the difference is between those low Compressor 2 settings and just changing a basic MPEG-2 preset to PAL? Know what I mean? Is it even necessary to do the whole "Advanced Conversion" step in C2? Its so quick and easy just to change the MPEG-2 setting to PAL, but I haven't had time to test how it compares to using Advanced Conversion, either at low or high quality. With alot of what I'm doing, the source media looks terrible anyways, so I don't need a perfect conversion. Just something decent and fast preferably.
    I shamefully admit I still haven't tried yours except to demo, but I will one of these days when I have a few dollars or have a huge load of conversions to get through.
    Doug

  • Fixing Drop-Outs and NTSC PAL Conversion

    Hi All,
    I know there is a filter / Programme out there that can remove Beta Drop-Outs from bad video fields but the name escapes me. Also I need to find an excellent Pal to NTSC conversion software, this is for a broadcast programme so it MUST be a professional quality. Any help or suggestions would be greatly appreciated.
    Dual 2 G5   Mac OS X (10.4.1)  

    See if this is what you want. I think this is what I used several months ago that worked.
    10-06-05 dropout fix plugin
    http://www.digitalheaven.co.uk/indexflash.htm
    Sharon
    G5 DP 2.5   Mac OS X (10.4.1)   4.5GB RAM

  • NTSC - PAL conversion problem

    I'm noticing a sort of faint horizontal line effect (like cardboard) on a lot of my conversions recently - can anybody explain what might be causing this?
    Compressor setting:
    Frame Controls: On
    Resize Filter: Best (Statistical prediction)
    Output Fields: Same as Source
    Deinterlace: Better (Motion adaptive)
    Adaptive Details - Checked
    Anti-Alias: 0
    Details Level: 0
    Rate Conversion: Better (Motion compensated)

    What is the delivery format of the finished movie?
    If it's going to DVD, 99% of PAL players will handle NTSC discs without issues.
    If it is for transfer to tape or you need to be sure of having a working DVD for the other 1% and you are doing this regularly, look at setting up a relationship with a post house that has a hardware based standards converter from Snell & Wilcox or Teranex. You will get great results in real time and a real expert operating the thing. Shop around for the best deal.
    Can you post a small clip of your "cardboard effect" somewhere?

  • NTSC PAL editing question

    I have a new accessory for my camera which does not allow me to shoot in PAL ( the manufacturer is working to resolve this ). I'm making a short film on my DSLR for the web and have already shot footage in PAL. What kind of issues will I face if I shoot more footage in NTSC and try to bring the two together ? Thanks.

    The frame rates won't match and the footage that doesn't match the sequence will be stuttery. Don't do it...mixing frame rates is a no no in FCP. Shoot all one frame rate, and convert later with Compressor.
    Shane

  • PAL conversion question

    Here's the situation. I've got a DVD all edited. I need an NTSC version and a PAL version. Right now I have everything edited NTSC and encoded to mpeg2 for the NTSC DVD.
    How do I go about converting the PAL version? Do I need to re-export the QT's from FCP as PAL or can I convert my existing NTSC QT's or mepegs to PAL?

    I just wanted to wrap this one up real quick.
    Going by the article in the link above, Compressor takes about 30 minutes to convert 1 minute of video.
    I downloaded the Nattress demo and gave that a try as well. It took a couple of minutes 2 do all of the necessary nesting and applying the filter, 13 minutes to render, 23 minutes to export, and 8 minutes to encode in Compressor. This was all done with a 1minute QT. So it was a total of about 46 minutes to produce 1 minute of PAL video.
    It would appear the Compressor method is the quicker of the 2.
    My problem is resolved... Going to recommend to the boss that it just isn't cost effective to do this one. Thanks for all the help.

  • NTSC PAL conversion with Atlantis software

    Anyone used this: http://www.dvfilm.com/atlantis/index.htm
    The demo appears to work well - but would be grateful for your input before parting with the cash.
    Cheers,
    Steve
    Message was edited by: Juzcoping

    I have about 2000 X 5 - 10 sec clips to convert from NTSC to PAL. Nattress, while very good, is a bit time consuming what with nesting files and all. Haven't considered using Compressor. Will look into that too.
    Cheers.

  • NTSC/PAL conversion quality query

    I have managed to accidentally do all my iMovie in NTSC format rather than PAL. I found out that you can recode it and save it as a quicktime movie in PAL format. Will this reduce the quality of the finished product or would I be better off doing it all again in PAL format in iMovie?

    Hi Sparkley:
    Read this and then decide...
    How can I convert PAL<->NTSC
    http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#PALNTSC
    ;)Sue

  • NTSC-PAL Conversion???

    I'm trying to find out a way of converting 1080i(29.97) to 1080i50 without getting motion judder. Does anyone know how?

    I get very good results using compressors advanced mode, I convert HDV 1080i60 to HDV 1080i50 and turn on the advanced motion controls.
    It takes a very, very, very long time - hours per minute kind of long time - but the end result looks like it was shot natively at 1080i50 for most movement. I found natresses stuff was very quick, and delivered an excellent result (it blends at a field level) but still had motion strobing on slow smooth pans - it is worth having that plugin in your toolkit though, just anyway.
    If you need it done well, this side of Christmas, you are going to have to take it somewhere.
    Test a small clip, like 10 seconds, and work from there.

  • NTSC - PAL colors conversion for betacam

    I need to get a video file that is NTSC (no compression 8bit) into PAL (no compression 8bit) to edit it in Final cut pro 5.1.4 and to put titles from Motion, to finally put it on a betacam tape. To be shure that the conversion (NTSC-PAL) is well done, I gave the NTSC file to a professionel conversion compagny. (I tried to do it myself with compressor and with the plug-in natress, but was not completly satisfied with the result).
    Now my problem is that the conversion company didn't compensate the modification of colors during the conversion. So now I have a file in pal (no compression 8bit) but the colors are lighter then the original file in NTSC.
    Can someone tip me on a way to modify the colors in Final cut pro of my file in PAL? I know how to use most of the filters, but I don't now much about doing it professionally. I was hoping that there could be a filter or a plugin that is made for my kind of problem, and I'm afraid of making a mistake because I never prepaired a file for a betacam tape before. Do I have to be carefull with the percentage of black or of white? Do I have to work in RGB or YUV?
    My second question is: the video PAL that was converted from NTSC has lines where there is quick movement when I look at it in Final cut pro or Quicktime. (the original NTSC file didn't have them) Should I use a filter to desinterlace it or will these lines disapear any way on the betcam tape? But I'm puting titles with Motion, so those titles don't have lines... How will they mix with the video?
    Thanks for your help
    Louie

    Hi mish,
    that is such a .. <searching correct english word> hillarious (?) idea, I give you a star for that ;-)))
    changing some flags on a ready-made dvd... wow! nice try...- but as Fred said, NTSC<<>>PAL conversions are no trivial tasks... you run into many problems, e.g. where do you get the additonal 5 frames per second you need for a transfer from PAL to NTSC? how to make the audio fit to these new pictures? and, I HAVE to do this silly joke: NTSC has a very different color concept (Never The Same Color) then PAL.. and for sure a different res...
    the name is irritating, but all mighty JES Deinterlacer is doing a fantastic job in converting video standards (ok, for a free software solution...) give that a try!

  • Any successful NTSC to PAL conversions out there and how?

    Hi all. I am using Compressor 2 and have yet to get a good NTSC to PAL conversion with the built in preset. I could use some suggestions.

    If you are unhappy with the current results don't use the standard preset. Try one of the other frame control options that offer higher quality but with much longer processing times. Also, make certain that you have the latest Compressor updates, the last update had fixes for NTSC/PAL conversions.
    Finally, you might want to try the freeware utiltiy JES Deinterlacer. JES does adaptive deinterlacing, inverse telecine, and NTSC/PAL conversion and many users seem to be happy with its results (and since it is a completely free download you can hardly go wrong).

  • Pitch Change fix for 24p NTSC to PAL Conversion

    Anyone here have a decent tutorial for Audacity or Soundtrack Pro to fix 4% pitch change caused from 24p NTSC to PAL conversion? I don't have Protools. Thanks!
    Alexander

    In the Project tab of STP (top left pane) there is an Audio PullUp/PullDown menu. You should find the preset you need in there.

  • NTSC MPEG2 conversion to PAL MPEG2

    I have 10 NTSC wedding dvds which I want to convert to PAL dvds. I don't have the original dv files, just the finished dvds. I want to be able to view my made in Canada dvds in India. Is it possible to do this?
    I know that some dvd players will play both pal and ntsc, but i don't know if my relatives have this type of player.
    Is there an easy way to do the conversion or should i just tell my relatives to get a ntsc/pal dvd player?

    http://www.danslagle.com/mac/iMovie/tips_tricks/6017.shtml
    http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#PALNTSC

  • Where to ask conversion question

    I want to ask a question about PAL to NTSC conversion. What's the right forum for that? Is there one? Should I ask here?,
    Ross

    My recommendation -
    Using MPEG Streamclip, convert the PAL DVD to QuickTime/Apple DV PAL.
    In FCE, change your Easy Setup to DV PAL; create a new sequence; import the QuickTime/Apple DV PAL file you exported from MPEG Streamclip.  Do your editing (if any).  Export to QuickTime Movie. Non-self contained is fine.
    In iDVD, set your Projects > Video Mode preference to NTSC, with encoding =  High Quality or Professional Quality.  Import the QT Movie that you exported from FCE.  Create whatever menus you want.  Burn your DVD.  You will get an NTSC DVD that will play just fine in most USA DVD players.  I have done this and think the resulting quality is pretty good.
    iDVD has the capability to convert PAL>NTSC and NTSC>PAL.  I have experimented with this and think the quality is quite good.
    There are more complex ways to convert between PAL and NTSC.  JES Deinterlacer has the capability but I think other methods produce better results.  The iDVD method is basically free.  The only better alternative that I have experience with is Graeme Nattress' Standards Conversion, which works really well but it costs $100 and because it was designed for FCPro, it requires some workarounds to use in FCE.

Maybe you are looking for