Ntvdm using 100% cpu when installing jdev 3.2

I downloaded jdev32.zip from otn, unzipped it into a directory and tried to launch setup.exe. Busy cursor appears for about 15 secs, then disappears. ntvdm is startet and consumes 100 % cpu time. No install screen appears.
I stopped almost every service on my nt 4.0 server sp 5, no help.
Anybody any idea / experience ?
Pascal Glauser
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by John - JDeveloper Team:
Glauser,
This is most unusual. Possibly a corrupted Zip file was downloaded - Possibly other resource / file issues.
Please check the following things:
1. Make sure you have pleanty of available free disk space for the installation to unzip and install.
2. Run WinZip on the Zip file to see if any errors pop up - if so, you may need to re-download.
3. Possibly - Reboot machine and then try to install when minimal OS activity has occurred.
I hope this helps,
-John<HR></BLOCKQUOTE>
Dear John
Thank you for your reply. I can exclude the bad zip file, for the setup programs from jdev 3.1.1.2 and jdev 3.1, which happened to stay on my machine, show the same behaviour (they worked fine at their time). I agree that it has something to do with my installation. Meanwhile, I reapplied service pack 5 and applied service pack 6 for NT, no help.
I will try to check with install shield corporation.
Pascal
null

Similar Messages

[x86_64] nvidia 180.29: kde4 plasma and others use 100% cpu

i have a problem with the latest beta drivers from nvidia (185 series):
plasma uses 100% cpu, when i kill it, krunner uses 100% .. deleted plasma configs and kdm configs but that didnt change a thing..i also switched from kdemod to kde from extra, same problem..
nay idea what else i can try?
do you guys have success with this (propably outstanding) driver and kde4 ?
Last edited by aantipop (2009-04-09 15:13:28)

i was using xorg-server 1.5.3..
after upgrading to 1.6 i can use 180.44.
but still 185.19 + xorg 1.6 does not work here , but the errors were not kde related this time:
dlopen: /usr/lib/xorg/modules/drivers//nvidia_drv.so: invalid ELF header
(EE) Failed to load /usr/lib/xorg/modules/drivers//nvidia_drv.so
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found

Ff stalls out when opening new tabs, using 100% cpu on mac

went to leave this in the feedback section but that doesnt work either, nothing gets sent. but anyways, new tabs always feeze or stall for over a min, using 100% cpu. running mac 10.6.8. never had problem on earlier versions of ff but ff5 is broken im sorry to say on macs. please advise or fix, more and more people are experiencing this same issue but nothing is being done to resolve.

16gb aint enough lol> imac 27 , top of line, ssd hdd, 16gb ram, all updates, if memory was bad it would happen on other browsers or apps, only happens when you specifically open a new tab.

ITunes will uses 100% cpu and will not close in OSX Lion

When I start up iTunes, after a few minutes, the fan kicks on and Activity Monitor shows that it is using 100% CPU. The fan kicks up and the MBP gets warm. I have to force close to get it to shut down. iTunes match is constantly running, so maybe that has something to do with it?
I'm not running it in Mini Player mode or anything like that, so I'm not sure what's causing the problem. Any thoughts on how to diagnose it?

I also have this problem which has been getting worse with recent successive updates of Firefox. As a long-time user and advocate, I am about ready to look for an alternative browser. Firefox will not close and exit properly, requiring direct cancellation through Task Manager; starts up very slowly (often 1 to 2 minutes); and frequently locks up the CPU with 100% of cycles while doing NOTHING; offers to restart crashed sessions, but cannot recover and reload those sessions; will not operate correctly while any other application accesses the internet, like uTorrent. Firefox is set to delete cookies, etc. whenever the session closes, sqlite database is vacuumed regularly, CCleaner regularly wipes remaining accretions, and disk is defragged. Currently running 3.5.5 but will NOT upgrade until this problem is solved since later builds report the same problems. I know several other users who have experienced the same problem and I can no longer automatically recommend Firefox to users and clients. Is anybody paying any attention to this problem? What is being done to address this fault? Why is there no response to the original poster? Is this really a support forum or just a way to preoccupy and distract the users who suffer this malfunction? Wireless 54Mbps connection. No Adobe Flash, QuickTime, MS Silverlight, etc. installed on this machine. Firefox 3.5.5 with the following add-ons:
Aardvark 3.0
Adblock Plus 1.2.1
Adblock Plus: Element Hiding Helper 1.0.6
Free Download Manager plugin 1.3.4
Highlighter 0.1.4
MR Tech Toolkit 6.0.4
repagination 2006.4.5.1
Save Complete 1.0.1
Session Manager 0.6.8.3
Tab Mix Plus 0.3.8.4
Unhide Passwords 1.2.5.1
User Agent Switcher 0.7.2
Thanks for any help or suggestions.

Oracle uses 100% CPU

Hi,
I have installed Oracle 10g R2 on 64bit linux. It was working fine, until last week. I got alert that oracle uses 100% CPU.
Some lines from alert:
4894 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 56.3 12978 7720 22860 oracle
9244 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 50.4 10357 7720 22860 oracle
11798 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 41.1 4429 7720 22860 oracle
11740 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 28.3 45350 7724 22864 oracle
1516 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 24.2 29968 7728 22868 oracle
17006 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.8 21913 7724 22864 oracle
19449 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.5 20865 7720 22860 oracle
24877 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.0 18708 7728 22868 oracle
26566 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 18.4 5727 7724 22864 oracle
1788 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 17.1 3319 7724 22864 oracle
When I log in to EM, I can see section
Host CPU
It is 100%.
I have only instance named "parama". and it uses 1% CPU ant the picture shows that 99% CPU is used By Other.
What is Other? Why does it use that much CPU?
I had another oracle instance few months ago, but I is not used now (it is not even started).
How do I restore normal system performance?
Can I kill these processes?

Hello,
I have a similar problem. I see 2 perl processes related to Oracle that are taking up 99% of 2 cpus. These 2 perl processes have been running for days and keeping the load average high (above 2) on a mostly idle system.
The 2 perl processes are running:
/oracle/app/product/10.2.0/db_1/perl/bin/perl /oracle/app/product/10.2.0/db_1/sysman/admin/scripts/db/dbarchfull.pl
and
/oracle/app/product/10.2.0/db_1/perl/bin/perl /oracle/app/product/10.2.0/db_1/sysman/admin/scripts/db/dbresp.pl
Has anyone seen this problem? Can I kill the perl processes?
--Dan

Toplink Workbench uses 100% CPU

I'm playing with Toplink Mapping Workbench R2 9.0.3 Build 425. After I've created a test project with only two classes, the Java process consumes 100% CPU when the workbench window is active. The workbench doesn't show any errors.
Tried another JVM that I have installed to run the Workbench, but same problem.
When I go to another window, the java process doesn't consume CPU. So I cannot go to the command line and get a thread dump via Ctrl-Break. Well, I can, but the thread dump doesn't show any threads that are running (all are waiting).
Also, this problem only occurs when I have my project loaded. So I think it is Toplink doing some stuff in the background related to my project... but I can't tell what.
Windows XP Professional SP1, using JRE that came with Toplink as well as JDK 1.3.1_02.
(did not really notice until it goes a bit warm around me :)
Thx
Andrej
PS: I'm not evaluating Toplink, just playing with it to expand my horizon...

I assume the MW is still fairly responsive during this? I.e., it's not locked or frozen?
I believe it's just a minimum priority thread that's running in the background doing some consistency checking on the project. It should only last 20-30 seconds, and the process yields to any other higher priority thread, so even though the CPU is pegged, it shouldn't impact performance of anything else (including the MW itself).
I know what you mean about the heat though. :)
- Don

Internet browsing uses 100% cpu

Hello everybody.
This situation has driven me crazy the last 4 months and till now i have not figure it out.
Everytime i have a video streaming in my computer, CPU usage goes to 100%. It happens every time, either using internet explorer or Firefox or Google chrome. Even when i have a skype video call or a gtalk video call. Some description of each one:
Using internet explorer: While i am watching a youtube video, CPU limits up to 100% after 1 minute or sometime 5 minutes. I am not able to watch a 15min video. Internet explorer process uses 100%CPU. When i kill it via task manager, another instance of IE
appears with the same CPU usage. I also kill it and then 4 or 5 instances of rundll32.exe appear consuming 100CPU. If i kill them, explorer.exe uses 100% of cpu. If i do nothing and just wait, CPU is 100% for two hours. If i just kill only IE instances, taskmngr.exe
is consuming 40-50% of CPU for 1-2 minutes, then other processes like conhost or csrss consumes the same amount of CPU and after 4-5 minutes everything comes back to normal. That's the story everytime i use IE 11.0.9600.16518
Using Firefox: While video streaming, flash player process consumes all CPU. When i kill it, the same behaviour described above occurs.
Using Google Chrome: When i run it, 5-6 instances of google chrome appear in task manager and after some time this browser also hungs with 100CPU.
All above are also happening while i run Skype either i have a video call or just text messaging. Sometimes svchost is 25-30 % and system hungs.
Operating system is Windows 7 home premium 64bit with SP1, my graphics card is NVidia Gforce GT 230M (latest drivers 20% when these situations occur, my system is extremely slow and whatever i do, it limits up CPU usage.
Any assistance is acceptable. Thanks for the patience.

Hi,
First, I would suggest that you reduce the hardware acceleration on the computer and check if it helps.
a. Open Screen Resolution by clicking the Start button, clicking Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
b. Click Advanced Settings, click the Troubleshoot tab, and then click Change settings.
c. Note that some video card drivers do not permit you to change settings.
d. Move the Hardware acceleration slider toward None to reduce or turn off video hardware acceleration.
This issue can be caused by confliction from one of the background programs or add-ons.
You may use Process explorer as Milos mentioned to find the root cause to fix the issue:
Process explorer:
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
You can follow the references below to troubleshoot the issue:
1. 3RD part app: Remove to check the issue
2. Drivers: Update or install compatible version
3. System process/service: Upload the log file for analyzing.
I also would like to suggest you use Windows Performance Recorder to check the issue:
Troubleshooting Windows Performance Issues Using the Windows Performance Recorder
http://blogs.technet.com/b/askpfeplat/archive/2013/03/22/troubleshooting-windows-performance-issues-using-the-windows-performance-recorder.aspx
To diagnose HDD and RAM, I would like to suggest you contact your computer vender.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

10.5.2 Uses 100% CPU for about 10 mins

Everything was fine on 10.5.1 but 10.5.2 on Windows 7 32bit seems to use 100% CPU (iTunes.exe) for about 10 mins before settling down. I was just about to post 100% CPU when I saw it was back to normal so I closed and reopened it and the same thing has happened. PC has been restarted since it was installed.
Any idea what is causing this? Can I downgrade - if so, how?
PS: it's actually using 100% of one core.

Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
If you have one of the LSPs mentioned, you may have to do a winsock reset or remove the conflicting software.

Finder and loginwindow use 100% cpu with 10.6.8

I recently installed the patch to OS X 10.6.8 and now the finder is very unstable and uses 100% cpu and the loginwindow uses 100% cpu also. Yes I have Parallels 6 on this machine but I already "un-checked" the "show windows applications in doc" option which is the recommended solution. However, this did not fix the problem. I do not know how to determine what actual process is causing this finder / loginwindow issue. I very much appreciate if anyone has suggestion how to fix this problem.
This is on a mid-2011 MacBookPro.
thank you.

TBauer, I had the same problem with 10.6.8 using 100% of the CPU with Parallels 6 installed. The following steps solved this problem for me:
0. Take a screen shot of your Dock if you wish to remember it as currently set
1. Launch Activity Monitor and click on the CPU column so you can see Dock using the CPU
2. Move ///Users/ ... /Library/Preferences/com.apple.dock.plist to the trash
3. Click on Dock and click on Quit Process to stop the Dock
OS X will then rebuild the default Dock
4. Put the items back in the Dock that you want
That solved the problem for me yesterday morning. I've launched Parallels 6 several times now and moved the machine from my work network to home and the 100% CPU problem hasn't returned.
Hope that works for you, too!
I don't think using the combo updater will solve the problem. The problem appears to be a .plist that is generated with OS X 10.6.7 and earlier that contains icons of a larger than Apple documented size causes the CPU looping. Rebuilding the dock.plist under OS X 10.6.8 appears to solve the problem.
Parallels has issued a knowledge bulletin saying they are looking into the problem. On their web site they have another approach involving moving the offending icon out of the dock to solve the problem. I like my solution better but theirs works, too.

Airport using 100% cpu on 20" Core 2 Duo iMac.

My 10.4.8 C2Duo 20"iMac has this strange problem with the airport. I have it connected to a linksys router.
Every now and again, especially after waking up from a sleep I notice that the iMac is running a little slowly. When I then go into activity viewer to analyse the problem. I can see that the "airport" process is using 100% cpu, i.e. one of the cores. It seems to be in a loop of some sort.
When i force quit it, the iMac speed returns to normal and wireless connectivity is not dropped or affected in any way
Anyone seen this? Any ideas? Its strange, and irritating.

Start with this:
Open System Preferences, select the Network pane and select AirPort in the "Show:" popup menu.
Set the "By default, join:" popup menu to "Preferred networks."
Delete the listed preferred networks using the "-" button but this time we did not add it back again with the "+" button as Apple recommends.
Set the "By default, join:" popup menu to "Automatic."
Restart.
Manually rejoin the AirPort network using the AirPort menu icon, i.e. selecting the network (or selecting "Other" and typing in the network name if hidden) and typing in the WPA (or WEP) password.
If you are using the Checkpoint Secure Client software, then you need to uninstall it.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

When I called Apple Support to ask about the 100% CPU usage, they wanted to charge me because my Ipod was out of warranty. I insisted on talking to someone and finally got to talk to a software engineer for free. He said that he had never heard of the problem in his three years at Apple. Nonetheless, he sounded really interested and suggested that it might be a conflict with anti-virus software. I deleted the antiviruse and that DID NOT HELP AT ALL.
It seems as if Apple could care less. There is no official response. Their primary response is to look at the Forum. At least you find out that the problem isn't your fault, it really is Apple!!!!
So far the best solution is just to delete iTunes and use Mediamonkey to sync your pod.
Apple, please fix this!!!!!

Apple Mail client (version 8.0) using 100%+ CPU upon using mail drop (13" R-MBP running Yosemite 10.10)

Hello Support Community,
I am having quite the interesting issue. I have read plenty of reports where users' Apple Mail app is using 100% of CPU. This did not start for me until I went to go use the new mail drop feature in Yosemite. I am running Yosemite (10.10) on my 13" Retina - MacBook Pro (flash storage, 8GB RAM, 2.4 dual-core Intel i5) and my Apple mail is version 8.0. I have tried 3 different mail services (2 gmail accounts and iCloud), all result in the same issue. I have also done a complete erase of the hard disk and a brand new install of Yosemite, the issue persists.
As previously stated my mail app is using 100% upon, and only while, using the mail drop feature. If I force quit the mail app and allow it a minute, the mail app returns to using less than 1% of the CPU and the app and entire system resume normal function. Upon attempting to resend the same message that is placed in my outbox the CPU usage jumps to 50-80%. After a few seconds, the CPU usage will sometimes jump higher than 100%, ranging from 130% - 199%. All of these observations were made using Activity Monitor. Of course you can see my frustration, an app using this much CPU stops every process my Mac is doing (using safari, messages, iTunes etc.) - the whole computer locks up. Even force quitting is a difficult process to attempt.
Does anyone have a fix for this? I am at a loss and have no idea what to do. I am a pretty tech savvy guy and have tried everything that I would've thought would fix this. Is there anyway this could be a hardware issue? I don't think so but... all possibilities need to be taken into consideration, even though that one seems outlandish. Upon creating a new user account with a separate user library (but same system library) I figured the OS was the problem. I can't narrow it down to being a specific mail provider, and it can't be my OS since I have now erased and reinstalled 10.10 twice. Thank you!

I have this same issue. It has been driving me insane, Mac Mail uses 100% CPU most of the time I use it, after every time I open the machine, or after a sleep or even mostly after a screen saver has locked me out. It normally settles down after 5-15 minutes, but then happens every time again. It is killing my battery.

"EMPTY" Virtual Circuits causes the dispatcher proces D000 use 100% CPU

(29th April)
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 29 14:59:56 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Could someone please indicates why the D000 process uses 100% cpu while no XDB action seems to be running? Whe are not using shared server (besides the XML DB usage) and the only value for the dispatcher parameter in the init<SID>.ora = (PROTOCOL=TCP) (SERVICE=<SID>XDB).
update (30th april)
When I lookup the virtual circuits I notice 2 VC without server and waiter address and without session info.
GERE@ARG_DV8>
# SELECT RAWTOHEX(C.CIRCUIT), RAWTOHEX(C.SERVER) SRV, RAWTOHEX(C.WAITER)WTR,
2 D.NAME,
3 S1.NAME,
4 S.SID,
5 S.SERIAL#,
6 C.STATUS,
7 C.QUEUE,
8 C.MESSAGES,
9 C.BYTES
10 FROM V$CIRCUIT C, V$DISPATCHER D, V$SHARED_SERVER S1, V$SESSION S
11 WHERE C.DISPATCHER = D.PADDR(+) AND C.SERVER = S1.PADDR(+) AND
12 C.SADDR = S.SADDR(+)
13 /
CIRCUIT SRV WTR NAME NAME SID SERIAL# STATUS QUEUE MESSAGES BYTES
C0000002398456C0 00 00 D000 NORMAL NONE 6 261
C000000239840DC0 00 00 D000 NORMAL NONE 7 280
2 rows selected.
The SADDR is empty also.
GERE@ARG_DV8>
# SELECT SADDR, CIRCUIT, DISPATCHER, SERVER, SUBSTR(QUEUE,1,8) "QUEUE", WAITER
2 FROM V$CIRCUIT;
SADDR CIRCUIT DISPATCHER SERVER QUEUE WAITER
00 C000000239840DC0 C000000214C05FB8 00 NONE 00
00 C0000002398456C0 C000000214C05FB8 00 NONE 00
2 rows selected.
A lsnrctl services shows 2 current
Service "ARG_DV8XDB" has 1 instance(s).
Instance "ARG_DV8", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:58903 refused:0 current:2 max:2046 state:ready
DISPATCHER <machine: leo, pid: 5672>
(ADDRESS=(PROTOCOL=tcp)(HOST=leo.argenta.be)(PORT=53044))
Stop and start of the listener doesn't solve this problem but killing the unix process will do. When I killed the D000 proces a new dispatcher is started (does pmon do this?) and the current shows 0. This workaround is fine on the DVL machine but no sollution on a production DB :-)
Kind regards,
Rene
Edited by: Rene Geilings on Apr 30, 2009 2:28 AM

By the way... you just could be unlucky hitting a very rare situation that caused the phenomenon decribed by you. Deamon processes also could arise due too standard JDBC, ODBC or other connection methods. As long as you don't provide Oracle Support with a SR, you will not know if it is actually XDB related or not.
If I would implement XDB functionality in a production system than at least I would:
a) disable automatic memory management by setting SGA parameters manually
b) set the large_pool_size to a appropriate value to support the shared server processes
c) tweak dispatcher and shared server processes to match at least values that represent
   the minimum++ needed processes (= a higher value then needed maximum)
d) set java_pool size to a decent size (250 Mb or higher)
e) set an appropriate PGA setting to support XML fragment handling
f) DISABLE autoregistering database functionality with the listener
   (see amongs others "Registering non-default XMLDB HTTP/WebDAV and FTP ports
   on a non-default Oracle Listener port" - http://www.liberidu.com/blog/?p=116)
g) alter the xdbconfig.xml file with more appropiate timeouts, locking and cache handling.
h) dedicate a specific listener (aka a a listener not called "LISTENER") for shared server
   connection handling (this for management reasons and specific debugging).
i) use version 10.2.0.4.0 or 11.1.0.7.0 for production environments (I know that this
   matches your environment)
j) always enforce that client software matches the database version
   (as in your case 10.2.0.4.0)
k) keep NLS settings on client and database equal and support a AL32UTF characterset
   (IMHO a minimum requirement on the database side)

CF4.5 uses 100% CPU and hangs

Hello,
According to the ColdFusion Forums my problem is not a new one but I still want
to post it with the hope to get some kind of answer.
I'm are running the following system:
CF 4.5 Enterprise Server
SiteMinder 6.0
IIS 5.0
MS SqlServer 2005
Both the CF and database server are Win2000 SP4.
About every one hours the CF server uses 100% CPU and from than on it is
impossible to log into the application. The site is still available though.
After restarting the CF service everything works fine until.....
I do not know what triggers this but I suspect it has something to do with
SiteMinder and logging onto the application.
The site has to go live on Monday so you can imagine the pressure to get
this fixed before the weekend.
Greetings,
Jilani

Jilani, you mention that this seems connected to SiteMinder. Do you mean you have your own version of SiteMinder, separate from the built-in one that came with CF 4 and 5? I wonder if there could be a conflict between them. Why are you using the full SiteMinder? And do you really need it?
More curious is that you say this spike happens every hour. Can you confirm if it's every 67 minutes, specifically? If so, then I would assert that this could be a problem related to the client variable purge process, which I discuss here:
http://www.carehart.org/blog/client/index.cfm/2006/10/4/bots_and_spiders_and_poor_CF_perfo rmance
But that may not be the issue if simply enabling/disabling the siteminder service will immediately recreate your problem....unless somehow the DB used by SiteMinder is the same DB used for client variables. Do you have any datasources listed in the CF Admin page for client variables? Any chance there's a connection between them and siteminder?
/charlie
PS This whole issue of client variables and how they can hurt you unexpectedly is something I'll dicuss this Thursday at noon US EDT, when I present "Clients and Sessions and Crashes, Oh My", to the online ColdFusion Meetup: www.coldfusionmeeetup.com.

Elements 10 Playback uses 100% CPU 0% GPU

When I play back a video clip in the Elements 10 environment the video is choppy and my system is using 100% CPU and 0% GPU. When I play back the same files in Sony PMB the CPU runs at about 15% and the GPU runs at about 50%.
Is there a way to get Elements 10 to use the GPU?
System Specs:
Windows Vista SP2
AMD Athlon 64 X2 Dual Core 5600+ 2.8GHz
3 GB RAM
ATI Radeon HD 2600 XT
Video Files are 1080i 5.1 m2ts.
I am using the trail software now and will buy if I can get it working.
Thanks!

Certainly when rendering PRE uses as much of the processor capacity as possible (somewhere in these forums I posted a screen shot showing all my four cores at 100%).
But in normal use I don't notice it hogging all processor power. I wonder if you have selected the right project setting for your video.
What Sony camera are you using?
What format did you record the video in?
How did you get the clips onto your PC?
What project setting did you use when you created your project?
Do you see red lines across the top of the timeline when you first add your video to the timeline?
As you edit your clips the timeline will show red lines - to perform a render press [Enter] and wait for the lines to go green.
Are you using still images in the project? What pixel dimensions are they?
You might find these articles helpful:
PrE Hanging, or Crashing - Some Tips
PrE Hanging, or Crashing - Some TipsClean, Lean & Mean Editing Machine - One Workflow
Cheers,
Neale
Insanity is hereditary, you get it from your children

Ntvdm using 100% cpu when installing jdev 3.2

Similar Messages

Maybe you are looking for