Nuevas Notas emitidas por SAP

Perdón, he borrado esta pregunta aqui, porque la volví a hacer usando mi user personal. Gracias!
Edited by: Projet EURECA on Apr 29, 2011 2:21 PM

Hola.! A nivel abap, puedes usar la funcion so_object_send para enviar correos, ahora por customizing no estoy seguro, pero creo que podrias configurar una clase de mensaje que salga por correo automatica... saludos,

Similar Messages

ITServer - Internet Service created by us not working in SAP ECC

Hai all,
We have SAP R/3 4.6C and a ITS server 6.1. We created some Internet service and published in our ITS server.
We have ugpraded our system to SAP ERP Central Component 5.0, which has inbuilt ITS server. I published the standard SAP internet service "BWSP" and our own internet services. The problem is standard SAP Internet Service is working whereas the the internet service which we developed is not running.
Before publishing i did the following settings, Utilities => Settings => Internet Transaction Server, in the "Test Service" tab i have selected "Default Web Server" radio button and on "Publish" tab i have selected "On All Defined Sites".
I published the service by selecting Publish =>Complete Service by right clicking on the service name.
When i execute the service using ITS url i am getting the following error
Service cannot be reached
What has happened?
URL http://devnw2.xy.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available
Please let me know what's wrong and what is the solution to correct it.
Regards,
Basha.

Hai Raja,
I tried adding in the entry as below.
The below value i just copied from the service BWSP and put it here and changed the transaction code.
~TRANSACTION     zgeestc017
~THEME     99
~COOKIES     1
~DESIGNS     sap_streamline
~RUNTIMEMODE     pm
~DISCONNECTONCLOSE     0
~FLICKERFREE     0
~URLIMAGE     /sap/public/bc/its/graphics
~URLMIME     /sap/public/bc/its/mimes
~URLARCHIVE     /scripts/sapawl.dll
~GENERATEDYNPRO     1
The below is the full error which i got when i tried to run the service after doing the above change.
What has happened?
URL http://devnw2.abc.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available.
Note
The termination occurred in system D00 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:devnw2_D00_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Regards,
Basha.

BEx Analyzer not working in SAP GUI 7.10

Dear All,
BEx Analyzer 7.0 is not working on SAP GUI 7.10. Following are the details:
OS: Windows XP SP2
Installed the following softwares (in the sequential order):
1. Microsoft .Net Framework 2.0 SP1
2. MS Office 2003 (without any service packs)
3. SAP GUI 7.10 (used SAPAllSetup.exe) to install both BEx Analyzer 3.5 and BEx Analyzer 7.0 alongwith SAP GUI 7.10.
While BEx Analyzer 3.5 runs fine, 7.0 does not.
Upon running BEx Analyzer 7.0 from the Programs menu, I see a toolbar on the left hand side on MS Excel in German. Whenever I click on any button, they do not respond.
When I tried to install update for Office 2003 (KB907417), I received the message stating the patch has already been applied.
I also applied SAP GUI 7.10 Patch Level 8, but still the problem remains the same.
Running Tcode RRMX from the SAP GUI opens MS Excel with both the toolbars of 3.5 (on top) and 7.0 (on left). As before, 3.5 works fine, while 7.0 does not.
Do I need to install Office SP2 or SP3, as well? Or something else? Any solutions?
Thanks and Regards,
Sachin.

Hi All,
This problem is due to .NET 2.0 assembly(nothing but .dll's),
Step1 : Check if you can see this C:\WINNT\assembly\GAC exists
If it does and still getting the error, then follow these steps,
1) Uninstall office03
2) Uninstall GUI
3) Uninstall .Net 2.0
4) Reboot
5) Install .dll(WindowsXP-KB935448-x86-dll.exe) fix(this is due to .net1.1 and 2.0 coexistence)----- only if u get a critical message at startup.
5a) Reboot
5b) Install .net1.1
5c) Reboot
5d) Install .net2.0
5e) Reboot
6) Install office 03
6a) Reboot
7) Install .PIA's (O2003PIA.MSI)
7a) Reboot
8) Install setupall.exe for GUI
9) Install KB907---- (office2003-KB907417-FullFile-ENU.exe)
10) Reboot
Let me know if you encounter any problems.
OR....
Update the Latest Patchs of GUI & Bex.
BI710SP03_300-10004472.EXE
bi710sp04_400-10004472.exe
gui710_6-10002995.exe
Hope it helps you...
@shaik

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

How do i check the list of invoices which are not posted into sap.

Hi All,
Iam displaying(ALV) the list of invoices and epayments for both PO & non PO transactons which are being processed in workflow but not posted in sap.
(Non po transaction is th eone with out reference of a PO)
How to check and list out the invoices that are not posted in sap. where does this get stored.
please help.
Thanks
jyothi.

Hello Jyothi,
U can give try with EKBE table for getting invoices for PO. In this table there is a field vgabe which has various status. U can try that. Now for Non PO, u would be directly creating invoice doucment using FB60(i guess) which would create an entry directly into BKPF/BSEG. U can scan BKPF for the date range company code document type KR which vendor invoice.

Error " Could not connect to SAP R/3 system"

HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
Rachel

When I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System   SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes

System is not visible in SAP MMC

Hellu Guys ,
System is up ad running fine ,but it is not visible in SAP MMC .
Kindly let me know that how to activate in MMC .

You cam add snapshot in MMC , check in menu
File --> Add/Remove Snap-in -->Add --> SAP System
Provide detail as required.
Regards,

MATMAS01 IDOC not reaching to SAP XI via report program.

Dear Experts,
WE are facing small challenge.
I searched on SDN on scenarios: IDOC not reaching to SAP XI. But could not find exact solution t oour scenario.
Problem:
MATMAS01 IDOC is not reaching to SAP XI via report program and is in status of 03 on SAP system. And there are not entries under SM58.
Under SAP XI system IDOC entry is not reflecting under IDX5 transaction, I tried to delete meta data of MATMAS01 thru IDX1 and uploaded again but still IDOC is not reaching to SAP XI.
The strange is that MATMS01 IDOC is reaching to XI via WE19 test tool. So PORT and RFC destination settings betweeen R3 and XI is also correct.
What could be the wrong ?
Thanks
Divyesh

When sending Idoc from R/3,
Settings at R/3
create one port at WE21,
Create Partner Profile for Outbound Message type in WE20.
settings at XI
Create one port in IDX1
Import Matadata in IDX2.
Create complete scenario in ESR for Idoc sender, also import IDoc in Imported Objects.
Check these settings & send test idoc using WE19.

Lotus notes data in SAP BW

Hi Gurus,
We are facing with a typical scenario here. I want to have my Lotus Notes data in SAP BW system. Lotus notes uses NSF file system to store data. I am not clear how can we get this into SAP BW. I tried searching the same in different forums but none of the thread come close to solving the issue.
There are connectors available. However, I am not able to find documentations on the same. I know how to transfer SAP BW data in Lotus notes but not the reverse. I tried searching for LotusSQL Drivers but found no documents on this as well.
I want to know what source system can we use here. Is'nt there any other way without using a file system as Source system to accomplish this. I want the entire process to be automated. I don't want to use a middleware (like ORACLE database) in between Lotus notes server and SAP BW.
Can anyone please respond to the same.
Thanks in advance.
Regards,
Sreekul Nair

Thank you for the prompt response Shanthi. However, I don't want to use File System as my source system. I want to do it via a use of a Lotus notes connector or Lotus Enterprise integrator. I want that the data as and when pushed from Lotus notes should appear in BW system.
How to achieve this. Plz help.
rgds,
Sree

The Oracle JRockit JVM is not supported by SAP JCo 3.0.5.

Hello all,
I am preparing our new Oracle Fusion Middleware platforms. So far we have been running BPEL 10.1.3.4.0 and we are going to build the 11g platform (WLS and SOA suite) in parallel.
I have already installed WLS Server 10.3.3 and then SOA Suite + the SOA patchset bu selecting always Jrockit_160_17_R28.0.0-679.
Now I am abaout to install the adapters and I red in the documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e17054/intro.htm
For supported JVM information that corresponds to each operating system, see the SAP Note #1077727 in the SAP Service Marketplace.
Note:
The Oracle JRockit JVM is not supported by SAP JCo 3.0.5.
Is anybody aware of this? If it is valid, how could I achieve not to re-installa everything from scratch and select SUN JVM?
Could I for example create a new Managed Server where I will explicity select SUN JVM to be installed for this instance?
Best Regards,
Loukas Rougkalas

Please post your question to SOA forum. This forum is about WebLogic Connector Container.

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

Local currency is not posted into SAP

Hi,
I am using the program 'RFBIBL00' for postings into SAP from leagacy file after validations. For this I am facing one issue.
CURRENCY - USD
AMOUNT - 12345.12 (example)
for this postings , the amount in local currency is not posting into SAP and the amount in local currency is recalculated by SAP at the exchange of system.
Please help me for this how to post local currency into SAP.
regards
SVR

Hi,
Which field in BBSEG structure you are passing the amount field to? Did you use BBSEG-DMBTR?
Regds,
Rudra

Incoming payments(card payment) in biller direct not updating in SAP.

Hi Friends,
we are using the FSCM Biller direct for customer incoming payment. we have maintained the payment method (incoming) and credit card number in customer master.
every think is displaying in biller direct like open items and clear items. But we received a payment from customer through credit card and its updating in portal, but its not updating SAP. it's in inactive mode when i am trying to clear the open items. giving the message that this amount is already done in biller direct.
so please suggest me how the open items are cleared when the payment are received through biller direct.
thanks in advace.
Regards
Ram
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Mar 25, 2009 4:36 PM

Hi
thank for your reply. I have not posted in SAP. customer has paid the payment in Portal and i have selected the payment for the line item. Now that line item is coming in progress condition (not in processed).
in SAP that line item is not active. If i will select the line item system will give the message that is line item is processed in biller direct.
please tell me the process of biller direct payments in SAP and then only in portal the payment line item will be go to the process item (now its in in process condition). is their any upload for the payment document in SAP.
please suggess me Standard payment process through Biller direct. then i will compare the present senarious.
thanks in advance.
regards
Ram

Error :Could not connect to SAP systemSAP_R3_PLM

Hi,
I have uploaded the Business Package for projects into portal and assigned the iviews to a user(test_abc)...when iam trying to view the iviews by logging in to "test_abc" iam getting the following error:
<b>Could not connect to SAP systemSAP_R3_PLM</b>
Our Portal is only connected to SAP BW system...Not R/3..
Could any one please tell me whether we need to coonect to R/3 system to use this business packages?
also there are some iviews like "BW reports","Select a BW report" etc....
to use the above iviews do we require an R/3 system or Bw system....what is the data source for this iviews.?..iam confused ....Could some one help me on this issue?
Regards,
P.Navakanth

The primary backend system for this package is indeed an 'R/3' system. Other systems it used (depending on which iViews you wish to use) are BW and CRM. For exact versions of these systems which are supported please follow the link below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/40171ac2-a86d-2910-8692-ece21472e097
Please reward points if this helped Thanks

BP in CRM is not replicated in SAP R3

Hello everyone!!!
I have a problem with BPs not dsitributing to SAP R3 when assigning the sold-to party business role in CRM.
Scenario: I create a business partner as a prospect, then after due diligence I assign the "sold-to party" business role (which is when the BP should replicate in R3) but is not replicating. Even if I assing the "sold-to party" directly to the BP, it still no sucess.
When checking the TX - SMW01, the Bdoc message shows a "Processed" status but when click in the icon "Show Bdoc Msg Errors/ Receivers" the message I get is " No business role has been assigned to business partner 0000500031" -
Any idea why this is be happening?
I´ll greatly appreciate all the help I can get.
Thanks,
May
PD. Error messae in Spanish (which is the language I´m working with): "No se ha asignado ningún tipo de función al interl.comercial 0000500031" - Nº mensaje: XR065 ".

Thanks Arup and Rahul for replying.
I have checked the mapping in the PIDE transaction and for what I can see the mapping was done correctly. But something might be slipping my eye, so can you please take a look at the data in the TX:
CRM->R/3: Assign BP Classification to Account Grp
Classification: B
Account Group: ZN00
Name: CRM Clientes Nacionales
Number Range: 500000 - 599999
Note: This is the default grouping for creating BPs in CRM
R/3->CRM: Assign Account Grp. to BP Classification
1) Account Group used for Customers in R3
Account Group: CN00
Name: Domestic Customers
Classification: B
Grouping: R001
Ext: -
Number Range: 2000 u2013 99999
2) CRM account counterpart in R3
Account Group: ZN00
Name: Clientes Nacionales
Classification: B
Grouping: C001
Ext: X
Number Range: 500000 - 599999
What else can I be looking at? Can there be a restriction somewhere else that prevents the distribution (CRM - > R/3) from happening?
Thanks,
May

Nuevas Notas emitidas por SAP

Similar Messages

Maybe you are looking for