Nuke default PAN setting when expanding track view in multitrack project

I have not been able to find the following preference to change: When I expand the view of a track in a multitrack project, the default is for VOLUME and PAN to appear. I only want VOLUME. Every time I open a multitrack project after saving it with the PAN unchecked, it shows up again. Anyone know how to change the default settings for this?
Thanks

Thanks for the reply. I guess I did not miss some little option some place. Here is another default question for you: when I open a new multitrack project, SUBMIX 1 is always set to 1-6 SURROUND whereas I would prefer it to be 1-2 STEREO. At least that one seems to stay as STEREO after I have changed it and saved the project, but is there a way to change that default setting to have STEREO 1-2 in SUBMIX 1 from the start?

Similar Messages

  • HELP! Export tracks of a multitrack project produces equal track file lengt

    Hi,
    i have a problem with multitrack projects. I have one aiff file open on track 1, then split it and spread the parts each on one individual track. I then want to export the project. In this stage a folder with one file for each track is created. The problem now is, that every file for each individual track has the same size and length as the longest track.
    For the moment i have to open each single track file in the editor and cut off the oversized part at the end.
    I just know that this was working on STP2. How can i change the export so that each track's exported file is only as long as the track actually is in STP?
    Thanks for any help.
    Daniel

    I have recordings which are usually 2-3 hrs long, and i need to split these into smaller files so they are convenient to listen to.
    In STP2 i get used to open the large file in a multitrack project, put it on track 1, then cut it off into smaller parts and place each part on a individual track. Then export it. It was working really good and the result was exactly what i need.
    In STP3 it also works, with one difference. Each file for all the individual tracks have their correct content, but are all of the same size/length, means all are the same size/length of the longest track.
    example:
    lets say the large file is 60min long. I split it into 20 - 25 - 15 minutes. Put each onto a individual track and export all. Now all files are 25min long, but the shorter tracks are filled with a silent part to full the 25 min.
    I don't know what i'm doing wrong.

  • Default Copies Setting When Printing From iPhoto...Help

    I have the latest version of iPhoto '08. In a previous version I needed to print 12 copies of a bunch of photos. Since upgrading every time I go to print it prints out 12 copies unless I remember to go to customize and change to 1 copy. The 12 copies is the "standard" setting. No other application has this problem. HELP. How do I get this back to default copies of 1. Thanks!

    Thanks for the very quick reply! I had tried that earlier but just moved it to the desktop and let iPhoto create a new one...that didn't work. However, moving it to the trash instead DID work. Strange. Thanks and the problem is solved now! Very much appreciated!!!

  • How do I change the default program setting when I download a file.  Numbers keeps opening the file intended for Quicken.

    For example; Numbers keeps opening downloaded files intended for Quicken.  I can change the program to open the download, but I can't find a way to make the change be the default.

    In Finder locate a file you're having trouble with, highlight the file and type Command I (I as in Ivan). In the box called Open With choose the app you want to use to open the file with. Right below that  you will see Use this apps to open all documents like this one then click the button right below that calledChange All.

  • System preferences default icons set not showing when modifying user account icon

    Hi!
    I was willing to change my account icon and went into system preferences, accounts and groups, open my account and clicked on the icon in order to change it.
    To my surprise there was no default icons showing.
    All the icons are in their place in System/Lybrary/User Pictures/ but it seems there is not any info connecting them to the default icon set when modifying the accounts icon. The problem is on all the accounts.
    I updated the system to 10.8.2 and the problem is still there.
    I already did the permission verification and the only one which is alwasy appearing (even after repair) is someone related to "ruby".
    I can give more details if needed.
    Thank you everybody for your help.

    Thanks Bernard,
    It works fine with JInitiator but not working with
    the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
    i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
    Thx and Regards
    dkklau

  • Bug - View changes to grid when expanding a collection in the left pane.

    Tried submitting this via the bug report form but got java errors. Sigh...
    This seemed like the best alternative.
    ******BUG******
    Concise problem statement:
    View changes to grid when expanding a collection in the left pane.
    Steps to reproduce bug:
    1. Goto Library Module
    2. Ensure there is a collection with at least one child - if not create one.
    3. Make sure the collection is collapsed (you cant see the child and you see a right pointing triangle to the left of the collection name)
    4. Change to Loupe view
    5. Click the right pointing triangle next to the parent collection you just created to expand it.
    Actual Results:
    View changes to grid
    Expected results:
    View should remain unchanged - in this case Loupe view.

    The first is that I can't view the aperture library anymore directly from iphoto.
    THat is exceeding strange since iPhoto '08 could not open or share an Aperture library - that ability was first introduced in iPhoto '11 - with the latest version of iPhoto and or Aperture you can open the same library with either application - http://support.apple.com/kb/HT5043
    In the current version of iPhoto the photos are sorted by date in the film strip - I've not recently done a calendar so do not remember the specifics -
    LN

  • I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    Hi,
    that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
    Fox

  • List View Web Part - Default Chrome Setting

    In our environment, the "Default" chrome setting does not display the title or the border on our list view pages. We have tried Oslo and Seattle master pages and neither displays this to the end user. We do see the title in Edit mode, but
    not once the page is saved. If we switch it to Title Only, it does display.
    Is this the correct behavior? If so, is there an easy way to change the chrome setting to "Title Only" for the list view web parts in one particular web application when a view is created?

    That is the default behavior.  normally, the listview web part is on a page where the title of the library is displayed on the page, which would make it redundant to display it in the web part only.  I don't know any way to change this behavior
    by default when creating a new view.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • How do I set a new account as default in safari when I send emails from a web page

    how do I set a new account as default in safari when I send emails from a web page
    thanks in advance

    In the Composing pane of Mail's preferences window, look for the pop-up menu labeled "Send new messages from." Select the desired account there.
    Note, though, that this won't change the behavior when replying to a message... in that case, the reply will be sent from the account that received the message, unless you specify differently at that time.

  • Exchange 2010 Room Calendar Permissions are too permissive when Default is set to None.

    Help! Room Calendar permissions are too permissive when Default is set to None.
    We are a brand new Exchange 2010 shop, and have setup several conference rooms.  Many of them are restricted to specific groups to book via In-Policy Requests using Resource Booking Attendant.  The Room Calendar permissions for most
    rooms shows only two options for the Default access: None and Full Details.  Default is set to None, yet if someone opens the room calendar in Outlook (& they are not part of the In-Policy restrictions) they are able to see the full meeting details
    (even open the meeting for full details).  How is this possible when by default they should not have any access as it is set to None?  Some rooms would not be a problem for clients to see the details, but some rooms like Executive rooms need to be
    locked down so that others cannot see the room details - None.
    I also found this, although it did not make a difference.  If I create an Outlook profile for the room and login as the room calendar in Outlook, go to File, Options, Calendar, Resource Scheduling, Set Permissions I get different default options:
    None, "Free/Busy time", "Free/Busy time, subject, location" and Full Details.  Why do I have more options in this view rather than the Room Calendar Permissions?  I looked at two rooms and both Default options were set to "Free/Busy
    time", so I changed these settings to None.  Still the clients can view the full room calendar details.  What are we missing to get the room calendar locked down so it is not displaying details to everyone?

    Only the default groups and Exchange Admins have Full Access to these items, so that is not the issue.
    -MailboxFolderPermission 1RP07AWest:\Calendar cmdlet and it shows the same access I see when I open the calendar in Outlook and view the Permissions as shown below - Default is set to None.
    As I stated in my last reply the only thing that finally forced it to be blocked is changing the Resource Scheduling permissions under Options > Calendar for that room mailbox.  If I have to do that for each room calendar, it's going to
    take considerable time to change each one.  Is there a cmdlet to allow me to access and change that setting as well?
    RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
    FolderName   : Calendar
    User         : Default
    AccessRights : {None}
    Identity     : Default
    IsValid      : True
    ObjectState  : New
    RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
    FolderName   : Calendar
    User         : Anonymous
    AccessRights : {None}
    Identity     : Anonymous
    IsValid      : True
    ObjectState  : New

  • Captivate 5.5 is setting a Mastery Score in the Manifest when using Slide Views

    We have encountered a problem with Captivate 5.5 where it is setting the Mastery Score in the manifest to match the Quiz score setting even though we are only using slide views to track completion.  This is a problem because if we set the score to zero, our Saba LMS will immediately grant the user credit for the course on the first slide.  If we set the score higher than zero, the user will never get credit for the course as Captivate doesn't send a score to the LMS when using slide views to track completion.  Our LMS seems to ignore the status passed by the course once the Mastery Score is set.  We have compared the manifest behavior in 5.0 and it does NOT set the Mastery Score.  We can edit the manifest prior to loading in the LMS but this is a hassle and we'd like to figure out a way to permanently change the behavior to no longer set Mastery Score when using Slide Views to track completion.

    Hi,
    I believe the easiest way to do this is to edit the manifest.xml file in the Captivate Templates folder.  I posted instructions on doing that here: http://forums.adobe.com/thread/956390?tstart=0
    Hope this solves your issue.  V

  • Setting SCORM 1.2 to force a mastery score in the manifest even when only slide views are used to tr

    I have some courses that use only slide views to track completion, because the quizzes are set as separate elements in the LMS we are using (from Oracle PeopleSoft).  The LMS people are telling me they require a masteryscore of 0 to be included in the SCORM manifest file when using slide views.  However, when the manifest files are created, there is no mastery score included in the manifest. 
    Is there a way to force Captvate 6 to publish a mastery score in the SCORM manifest even when the completion criteria are 80% slide views?

    I am not sure, but you can always unzip the SCORm package and add the masteryscore by hand
    In your manifest there should be an organizations section like this. Add <adlcp:masteryscore> under the <item> tag
    <organization identifier="org-ident">
                                  <title>Course Title</title>
    <item identifier="some_id_1" identifierref="some_id_1-1" isvisible="true">
                                            <title>Course Title</title>
    <adlcp:masteryscore>0</adlcp:masteryscore>
    </item>
    </organization>
    </organizations>
    The above example has a single SCO with an ID of "some_id_1-1" an activity id of "some_id_1" and a masteryscore of 0. The masteryscore can be between 0 an 100

  • Set default grid artwork for composer grid view

    As the title I wanted to know if there is a way to set default grid artwork for composer grid view.
    Thanks.

    Nope. It is the first image from the first track of the first album that has artwork. As you move your pointer over the icon you will get any other images assoicated with that composer.
    tt2

  • Can I set a default home page when people use my router?

    Can I set a default home page when people use my router?
    Can I set it to my web site for example so that people have to go there when they connect?
    Thanks,
    Paul

    Hello EireReality. Welcome to the Apple Discussions!
    Can I set a default home page when people use my router?
    No, at least not that I'm aware of. Setting a "default home page" is typical feature of a web browser, not an Internet router.

  • How can I set a default for webpages to expand to full screen?

    How can I set a default for webpages to expand to full screen? Every webpage I go to does not expand to a full screen which causes me to have to ctrl+++ each time. How can I set my preference to expand to full screen automatically?
    Thanks.

    The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

Maybe you are looking for