Nullify the stock from Blocked Stock.

Hi,
I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
Please guide how to nullify the stock for parallel unit of measurement of the material.

Hi,
Please check the below things.
1. Check the material master whetner a conversion is maintained for EA and KG.
2. You can try post the MI10 document for the blocked stock in the parallel unit.
3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
6.Check MB5b FOR the wrong posting.
If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
Check for note on the service.sap.com
Regards,

Similar Messages

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Report to check the valued GR block stock

    Hi,
    I used movement type 107 to receive the PO with indicator 'Origin Accept', and would like to check how many stock I have received to the valued GR block stock.
    Anyone tell me which report I can use? I've checked the stock report under IM, but haven't found it.
    Thanks!
    Lin

    run Tcde MB52, and from change layout Ctrl+F8 move column Value BlockedStock.

  • Goods Issue against outbound delivery from blocked stock

    Dear All
    I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
    Please let me know any solution for this.
    Thanks and Regards
    Satish Kumar

    Hi
    Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
    http://scn.sap.com/thread/1541911
    Thank$

  • Stock from block to quality after UD

    Dear Team
    We want to bring back stock from block to quality and UD is done and we can not do it through mb1b and movement type 349 because QM is activated in material, please help?
    Regards
    Ramesh kumar

    Hi Ramesh,
       I suggest you to go through the below documents. It might be helpful to you in solving the issue.
    https://scn.sap.com/docs/DOC-51243
    Reversal of Usage Decision and Stock Posting of Inspection Lot
    Regards
    Kalyan

  • Move stock from block to inspectin

    HI, i have to move stock from block to inspection, i have tried Mov 349 but it 's giving error 
    Change the inspection stock of material 6520330201524 in QM only Message no. QA495  Diagnosis You want to make a stock posting to/from the inspection stock. This is not allowed for material 6520330201524 because the quality inspection control has been activated by QM.  The following cases can occur:  The inspection stock should be increased, although an inspection is not foreseen for the current goods movement The inspection stock should be released, although  you can only do this using the QM transactions.

    Sandeep,
    There are many posts here in the forum regarding this topic. I even posted a few myself a couple of years ago. Search them out you'll see there're many ways material can and will be moved into QI, Blocked and Res. intentionally and unintentionally. QM activated negates all the MM and MB Txs. Search them out.
    One of several ways this can be done is to:
    1. Revise the batch classification/specs. MSC2n
    2. Reversing the transaction which put the material in Block, QI, Res. in the first place via MBST if 
    you've the auth.
    3. (Otherwise) Have the creator of the material doc.perform #2 above 
    Hope it helps.
    V.  

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • MM Stock transfer from blocked stock between plants

    Dear friends ,
    Could I transfer material from Blocked stock between plants but in Blocked stock ?
    I not found this movement types in ECC.
    best regards,
    Ale

    It is not possible to move blocked stock between plants.
    You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.

  • Unable to create Vendor return delivery from blocked stock

    Hello,
    Would like to know how to enable delivery picking from blocked stock.
    Some back ground : I am using Delivery type RL (Vendor returns). Required config is done in IMG.
    In our process we move defective material to blocked stock. Next create a Return PO to pick material from blocked stock.
    Next use VL10b to create delivery document against this PO.  We are able to create delivery & PGI from blocked stock.
    All above steps are executing seamlessly without any issue In our QA system.
    However in PROduction system delivery document does not find any qty in blocked stock inspite of being in the blocked stock.
    Please let me know where I could find the setting to enable delivery shipping/ PGI from blocked stock.
    Look forward to some good responses.
    Thanks,
    Ram

    Prerequisites
    When you enter a return delivery, you should reference the purchase order or the material document, so that the system can:
    Suggest data to simplify data input (for example, the storage location)
    Check that the returned quantity does not exceed the delivered quantity
    Reduce the quantity delivered to date
    Reverse other updates that occurred (for example, for a goods receipt into consumption) when the goods receipt was entered
    Before you enter a return delivery with reference to a purchase order, you have to determine whether the goods were posted to stock or to consumption, or whether they were posted into goods receipt blocked stock. If you posted the goods to a particular stock type at goods receipt (for example, quality inspection stock), you have to return them from the same stock type.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63351643a211d189410000e829fbbd/frameset.htm

  • Withdrawals from Blocked stock

    Dear All,
    I work with Process Industry , and when I create Rework Process Order i add issued component Manually
    Normally it's Finished Product returned by Customer in to Blocked Stock
    Can i enter storage location and stock type for the component to issue from Blocked stock  ?
    Regards
    Rami

    hi
    Could you Explain what do you mean by ""S" is not a stock type as E fro customer stock, for instance"
    Regards
    Rami

  • Transfer of stock from Returns stock type to Unrestricted/Blocked

    Hi,Friends
    How to transfer of stock from Returns stock type to Unrestricted/Blocked
    what movement type will trigger by transfering this stock,
    Thanks & Regards
    Krishna

    Hi,
    use MB1B Mvt Type 453 returns to unrestricted
    Unrestriced to Blocked stock use - 344
    Thanks & Regards,
    kiran

  • Required reference document to issue the material from project stock

    Hi All,
    we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
    the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
    i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
    please help me out to resolve this requirent.
    manoj singh
    we can

    Hi,
    Did you implement PS module in your system?  How were your project stocks reserved?
    Cheers,
    HT

  • QM_move stock to block stock through Q2 notification type

    Dear QM Experts,
    u2022 I am creating quality notification type Q2 through QM01
    u2022 After doing necessary defect entry I want to post the defective material to block stock.
    u2022 For this I am using action box transfer posting unrestricted to block.
    u2022 By doing this material can be transferred to block stock of the same storage location
    Requirements,
    u2022 Is it possible to move the material to block stock of another storage location?
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    u2022 What type of setting needs to be done to achieve this effect?
    Thanks
    Anand Rao

    Hello
    u2022 Is it possible to move the material to block stock of another storage location?
       In notification action box you have the option of transferring the material from unrestricted to  block. In that you have the option inputting the storage location to which you want to transfer
    u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
    - As said this can be done through a development or other option is that you can choose the same action box( Transfer  unrestricted to block ) and change the movement type to 311. It will allow to move material from  one storage location to another
    another solution is that you can use tak with followupaction as Goods movements. its available in the standard. when u save the notification it will take you to transfer posting but wherein you will have to key in all the details
    u2022 What type of setting needs to be done to achieve this effect?
    Its available in the action setting in the configuration of notification. you will surely require ABAP help

  • Warning when moving allocated stock to blocked stock

    Dear all.
    we are facing a problem with our quality / mm flow. We have materials that while in stock need regular quality inspections (every 72 hours) .
    Batch is inspected and passed inspection and allocated to a sales order / delivery but will only be shipped in a few days. Then the batch is inspected again and does not pass inspection. The inspection people move the material from unresticted to blocked status.
    However the delivery is goods issued and send to the customer because the quality inspection people don't get a warning that the batch is already allocated to a sales order when they do the goods movement into blocked stock.
    Anybody has a sollution?
    Regards,
    CvM

    Hi Lakshmipathi
    thanks for the info. However if I understand correctly this means that every batch needs quality inspection before PGI and that is not the case.
    Every 72 hours the batch will be quality inspected. In most cases the delivery and the PGI will take place within the first 72 hours. However in some exeptional cases the inspection will take place between Del note creation and PGI (not on purpose, just the 72 hour boundry, the quality inspection people are not aware of the delivery)
    At that time the batch is already allocated to a delivery yet during the quality inspection the batch fails the qualifications and will moved to blocked stock.
    The people who move the batch into blocked stock need the warning that this batch has been allocated to a delivery so that it can be stopped before the trucks leave our property.
    Regards,
    CvM

Maybe you are looking for

  • Customer Open Items Mapping

    Hi gurus, We're currently creating a new periodic statement specific for a new company code. I'm new to this so I'd like to ask your helping in mapping the open items per customer account. What we would like to map in our periodic statement are the f

  • IPod driver update not found

    Hi, I got a brand new Nano for Christmas and cannot get it connected to iTunes. I have tried the 5 R's, read through a number of forum messages but have not found anything that works yet. The iPod is recognized when hooked up to a newer laptop, but o

  • How do I retrieve data from iCloud back on to my iPad

    How can I retrieve data off iCloud back onto my iPad after a full reset. Had to reset to get my FaceTime to work after the new upgrade.

  • Bbm won't work

    hey i have a problem with my bbm its not working with my carrier for somereason if my wifi is on it works fine but as soon as i turn my wifi off it just stops working i have a bbm add on so it should work i must have called coustomer service 100 time

  • Windows installer puts files in system32

    Some articles (about tomcat for example) speak about the importance of the java_home variable. Setting it to the installation root directory enables you to choose which vm use. Actually windows installer ver. 6 update 4 puts 4 files in system32 direc