Nulware incompatibility

After receiving a 4Gb Nano for Xmas and installing iTunes and Quicktime, successfully, and being able to synchronise the Nano, etc, I get the following dialogue box in XP, on boot-up of the PC;
'16-Bit MS-DOS Subsystem
C:\WINDOWS\System32\Nulware
The NTVDM CPU has encountered an illegal instruction.
CS:0548 IP:fff7 OP:ff fa ff ff 01 Choose 'Close' to terminate the application.
Close Ignore'
Do you have any idea how to fix this?

You should probably post your question in either the iTunes or QuickTime discussions:
http://discussions.apple.com/category.jspa?categoryID=150
http://discussions.apple.com/forum.jspa?forumID=943

Similar Messages

G4Ti4200-VTD64 voltage incompatibility with MSI K7N2 Delta-ILSR??

Hello,
I have the MSI G4Ti4200-VTD64 (4X) video card.. I want to upgrade my motherboard to K7N2 Delta-ILSR. Is there any voltage incompatibility?? I heard that new mother boards will support only AGP 1.5V. Is the AGP voltage of K7N2 Delta-ILSR 1.5volts?? Is my video card compatible with this voltage?? I really want to retain my current video card as I am quite satisfied with it and I'm not willing to invest on a new one at the moment. If there is an incompatibility could you suggest another Socket A MB with good performance and SATA RAID support.
Thanks in advance
Regards,
Joseph

Joseph,
All 4X Vid Cards work on all 4X and 8X mobos. All 4X mobos work with all 4X and 8X Vid Cards.
Take Care,
Richard

10.5.7 Fundamental Incompatibility with Mac Pro - Screen/System Lock ups

Hi all.
It looks like 10.5.7 is causing a lot of problems, but I think I found a problem that is very fundamental.
First, my system. It's one of the original Mac Pros with Quad Xeons at 2.66GHz. It has 24GB of RAM and several drives in there. I have 3 30" displays plugged into 3 NVIDIA GeForce 7300GT cards. I originally ran a 10.5.7 combo update on my 10.5.6 system, and experienced these problems (detailed below). As I was also running a beta of iTunes and the iPhone SDK (the 3rd release), and beta 2 of Safari 4, I thought this may have caused some trouble. So, I tried an experiment.
I bought a new Corsair 256GB SSD for my startup drive. Loaded my family pack of 10.5.6 onto it as a fresh install, and just applied the 10.5.7 combo update. I get the exact same behavior with no further software. So, this is a fundamental incompatibility of 10.5.7 with a machine having these specs.
Now the problems. They start with the primary (in my case center) screen locking while the other two screens keep working. Meaning, the primary display "works" but none of the windows move, the clock freezes...yet, if you move the mouse there and luckily grab a window, you could move it out onto the other 2 displays and it would allow you to continue to use the application. If you hit the CONTROLkey and scroll up and down (zooming the display in and out) it can sometimes "unlock" the primary display, but then there are many artifacts. For example, the shadows cast by windows appear as plain grey "dashboard esque" blocks and have black stripes at the edges. Also, at random times, the machine just seems to hang completely, and unlock a minute or 2 later. Eventually it locks for good.
Unfortunately this has lead me into a deadlock situation. My iTunes has been updated to the 3rd beta in the iPhone 3.0 SDK release. The library has been modified and only works with that version now. That version requires 10.5.7. So if I revert back to 10.5.6, I lose my iTunes Library or have to wait till the offical version of iTunes is realeased (although that may still require 10.5.7).
I see lots of people are having Firewire (800 in particular) problems, and I have several drives I need on Firewire. It's not a solution to yank them. It all works fine under 10.5.6, of course.
So the question is...is help on it's way? What to do!?
Thanks for any insights.
More info on the system below:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 24 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
NVIDIA GeForce 7300 GT:
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x8
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
Displays:
Cinema HD:
Resolution: 2560 x 1600
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No Display Connected
NVIDIA GeForce 7300 GT:
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-2
PCIe Lane Width: x8
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
Displays:
Cinema HD:
Resolution: 2560 x 1600
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No Display Connected
NVIDIA GeForce 7300 GT:
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-3
PCIe Lane Width: x4
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
Displays:
Cinema HD:
Resolution: 2560 x 1600
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No Display Connected
ATA Bus:
SONY DVD RW DW-D150A:
Model: SONY DVD RW DW-D150A
Revision: 1.MD
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: No
Power Off: No
TSSTcorpCD/DVDW SH-S162L:
Model: TSSTcorpCD/DVDW SH-S162L
Revision: LC02
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
Low Power Polling: No
Power Off: No
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Built-in Hub:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Unknown
FreeAgent Go FW:
Manufacturer: Seagate
Model: 0x2200
GUID: 0x20370200105F82
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 200 Mb/sec
Sub-units:
FreeAgent Go FW Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x110
Product Revision Level: 410G
Sub-units:
FreeAgent Go FW SBP-LUN:
Capacity: 149.05 GB
Removable Media: Yes
BSD Name: disk5
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
Seagate149GBTote:
Capacity: 148.73 GB
Available: 132.95 GB
Writable: Yes
File System: Case-sensitive Journaled HFS+
BSD Name: disk5s2
Mount Point: /Volumes/Seagate149GBTote
Unknown Device:
Manufacturer: Unknown
Model: Unknown
GUID: 0x0
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Unknown
OEM ATA Device 00:
Manufacturer: OEM
Model: 0x0
GUID: 0x30E102E0454B7D
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 200 Mb/sec
Sub-units:
OEM ATA Device 00 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x110
Product Revision Level:
Sub-units:
OEM ATA Device 00 SBP-LUN:
Capacity: 931.51 GB
Removable Media: Yes
BSD Name: disk4
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
TimeMachine:
Capacity: 931.19 GB
Available: 606.63 GB
Writable: Yes
File System: Case-sensitive Journaled HFS+
BSD Name: disk4s2
Mount Point: /Volumes/TimeMachine
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Unknown
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Unknown
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Unknown
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Unknown
Unknown Device:
Manufacturer: Unknown
Model: Unknown
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Unknown
Memory Slots:
ECC: Enabled
DIMM Riser A/DIMM 1:
Size: 4 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x8551
Part Number: 0x373254353132393230454641335343322020
Serial Number: 0x02007D11
DIMM Riser A/DIMM 2:
Size: 4 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x8551
Part Number: 0x373254353132393230454641335343322020
Serial Number: 0x02006013
DIMM Riser B/DIMM 1:
Size: 4 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x8551
Part Number: 0x373254353132393230454641335343322020
Serial Number: 0x0200711F
DIMM Riser B/DIMM 2:
Size: 4 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x8551
Part Number: 0x373254353132393230454641335343322020
Serial Number: 0x02007012
DIMM Riser A/DIMM 3:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x830B
Part Number: 0x4E54324754373255344E4231424E2D334320
Serial Number: 0xA4730244
DIMM Riser A/DIMM 4:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x830B
Part Number: 0x4E54324754373255344E4231424E2D334320
Serial Number: 0x70780241
DIMM Riser B/DIMM 3:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x830B
Part Number: 0x4E54324754373255344E4231424E2D334320
Serial Number: 0xE4760245
DIMM Riser B/DIMM 4:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x830B
Part Number: 0x4E54324754373255344E4231424E2D334320
Serial Number: 0xF0770241

I can only tell you that I've run 10.5.7 on my Mac Pro, same model as yours, without any problems. As a beta tester my Mac Pro was the main hardware on which 10.5.7 was tested. I currently have it installed on a first generation iMac, MacBook, and MacBook Pro as well as a second generation MacBook Pro. So far not a single problem.
But, I don't have multiple video cards nor do I use any beta version of iTunes (didn't know there was one since each system upgrade includes the current release) but I do use the Safari 4 Beta - the most recent version just released when 10.5.7 was released.)
I can suggest you read the following about updates of system software:
Essential Steps Before Updating OS X!
Please do things right before updating OS X in order to avoid problems.
A. Repair Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means your backup drive (should be erased first.)
Source means your startup drive or volume.
C. Download the Standalone Combo Updater from Apple.
Be sure you quit all running applications and disconnect all peripherals (except original keyboard and mouse) before running the installer. When the installer is running do not use the computer in any way other than to respond to an installer dialog.
Install the update by double-clicking on the installer package icon. When the installation is completed Restart the computer. Your computer will boot twice - this is normal. Upon completion of the update use Disk Utility to repair permissions. Not all permissions will seem repaired. You will get spurious reports regarding permissions related to iTunes, Front Row. These can be ignored. They will appear every time you repair permissions.
Following these basic steps should prevent most if not all updating problems. Note that if you have unrepairable disk problems reported in Step A then DO NOT update your system until those problems are resolved.
If you find that you did not follow these suggestions, then you might consider reinstalling OS X and going about the process properly in the hope of a successful result:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

ICal -- Entourage Incompatibility?

I'm running Tiger 10.4.10, and Entourage 11.3.8. It would appear that there is (still) some latent incompabiliy between iCal-originated events and Entourage (MS Office 2004 for Mac) invitees. I have the latest versions of iCal (2.0.5), Tiger (10.4.10), and Entourage (11.3.8). I'm aware that there have been issues related to DST, but my understanding is that these should have been corrected by software upgrades.
It appears that the problem I'm seeing occurs only when iCal creates an event and invites an Entourage user. Here are my observations of such events:
1. In the invitation email as received by Entourage, the End Date is shown as *January 1, 1601*. Clearly this is incorrect.
2. The event posts to the entourage calendar, but with a duration of zero (even though the original event was created in iCal with a non-zero duration, say, 1 hour).
3. The event does NOT initially show up in any of the Entourage Calendar views (Month, for example). Apparently, this is due to the fact that the duration is zero.
4. If you open the event in Entourage and manually change the duration to a non-zero value, then the event will show up in Calendar views.
5. However, the event is still displayed in Calendar view with a start time that is *one hour earlier* than the actual start time (the event itself displays the correct start time).
Invitations originated by another instance of Entourage seem to post correctly in all respects, so it would appear that there is some sort of incompatibility issue between iCal and Entourage?
Is anyone else seeing this behavior and/or does anyone know of a fix for it?
Thanks!

Me too. Same problems. Anyone?

Is there any incompatibility in using different JDBC and Oracle database versions?

Hi everybody,
I hope you can answer me ASAP.
Which version of JDBC driver for Oracle could I use to access an Oracle database version 8.0.4.3.0 running on a SUN machine?
Is it necessary to use the specific driver concerning to that version or could we use the JDBC version 8.1.6?
If we decide to use JDBC 8.1.6 to work against the 8.0.4.3.0 database, will we find any incompatibility or problem?
Thanks.
null

I don't know the answer to your question, but while looking for something else, I found a table listing "requirements and compatibilities for oracle jdbc drivers" that might answer your question:
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/getsta1.htm#1008206
(My aologies if that URL gets broken apart by this posting software and you have to piece it together.)
Hope this helps.

TS1368 Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.

Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.

Have downloaded the latest version of ITunes and now i get "Incompatable Application" I tunes will no longer open. have worked my way through FAQ and help to no avail. What am i doing wrong? currently running windows 7.

I installed Mountain Lion and now I cannot watch anything on flash player. It just says incompatable plug-in. I was instructed to download the latest version of flash play which I have done but it makes no difference what so ever.

As stated above. I need to upload pictures to my business website but now my upload box is just saying incompatable plug in. I wish I had never installed Lion as I was happy with my mac on its origional OS, I only installed it as my Java had disappeared and I was instructed on the java page that to upload the latest verion of Java I needed to upgrade to Lion. I am really not happy as I now cannot do the job on my mac that I bought the mac to do the job on. Please help. Is it possible to uninstall Lion without buggering up my mac and going back to my origional OS. I am on safari. Not even sure which version of Lion I have downloaded so I am sure you can tell I am not a teccy

Welcome to Apple Communities
Uninstall > http://fpdownload.macromedia.com/get/flashplayer/current/support/uninstall_flash _player_osx.dmg Finally, install Flash > http://get.adobe.com/flashplayer/otherversions

Apparent XP SP3 incompatibility with PC Suite 6.86...

On my Windows XP with SP3 I have installed PC Suite 6.86.9.3.
Since I have upgraded by SP2 to SP3, it appears that I cannot use PC Suite to connect to my NOKIA 6230.
The get connected wizard states that there is no connection type, although my Bluetooth is perfectly working.
I've already tried reinstalling the PC Suite program, rebooting the computer, etc.
Is this a "temporary" incompatibility ?
Any ideas on what to do?
Thanks!

I have Nokia N80 IE..., PC suite works very well on Win XP 32bit SP2...., i am connecting over bluetooth
i have upgraded to SP3, and still works....
after few weeks, i did windows update, and installed small number of packages.., after this.., nokia pc suite doesnt recognize my mobile (and any other).., i can't select nothing (irda, bluetooth, USB)...
i tried with USB cabel, also.., but nothing happens...
i think problem is in windows upadate, bluetooth connection works differently or it's problem in nokia pc suite (latest- 6.68.9.3)...
other bluetooth software works fine now...
I am very angry because I cant sync my N80 and Outlook...
(sorry on my bad english)

My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two.

Pages 5.1 file incompatibility with Pages 5 and 5.01?

Can anyone who has access to both Pages 5.01 and Pages 5.1 on different machines test the following:
1. Create a file in Pages 5.01 using various text and objects eg TextBox, Shapes, Images, Charts and Tables labelling it as XYZ v5.01
I suggest opening a vertical ruler as well, because this is one of the update "features".
2. Open the same file in Pages 5.1 make a few minor changes and resave it relabelling it as XYZ v5.1
3. Reopen that in Pages 5.01 and see if it reports an incompatible version
If you could also pass it through iCloud (change the name to note) to check if that also renders it unopenable in Pages 5.01
Thank you
Peter

Problem confirmed in AppleStore.
None of the New Pages 5.1, Keynote 6.1 & Numbers 3.1 files can be opened by previous versions.
In fact you get an error when trying to open the in built templates!
So now you have an endless succession of incompatibility even between minor updates.
Apple, Apple Apple!
What has happened to you?

Adobe acrobat pro 9.5.5 incompatibility with preview

anybody having incompatibility btwn these two programs? when I edit a PDF in Acrobat Pro 9.5.5, like this:
and then open the edited PDF in Preview, it looks like this:
text boxes disappear, arrows disappear, some text turns to nonsense (here's another example, where text is not aligned properly in text box):
any thoughts?

Unfortunately no. However, I did try converting several other stock photos that I have on my machine, and that worked fine. This leads me to believe there is something "different" about the first set of JPGs that I was trying to convert. Maybe a security setting on the camera that they were taken with? I'm still at a loss. But thanks for the suggestion that sparked the other idea

Issue with latest Adobe Reader 11.0.10 - Adobe Reader cannot open in Protected Mode due to incompatibility with your system configuration.

Since updating to the most recent Adobe Reader v11.0.10, getting an Adobe Reader Protected Mode: Adobe Reader cannot open in Protected Mode due do an incompatibility with your system configuration. Would you like to open Adobe Reader with Protected Mode disabled?

The solution I was looking for was to launch Adobe Reader in Protected Mode.
I could not identify issues preventing Protected Mode from starting. What ended up working, was to do a complete uninstall, followed by a reinstall. Now we can load Reader in Protected Mode.

External Display Incompatibility

I recently upgraded to Snow Leopard (all software updates completed-10.6.1), and ever since, my external display (22" LG Flatron W2252TG) has been looping in and out of power saving mode. I am using a vga cord with a mini displayport to vga adaptor, and a late 2008 macbook (first version of unibody macbooks).
If I have the display plugged into a power outlet, and the vga cable plugged into the display, the screen says "check signal cable"...makes sense. However, when I attach the mini displayport adaptor (Firmware 1.0.3 or 1.3, I'm not quite sure), to the other end of the vga cable, the screen immediately says entering power saving mode. However, it never actually goes into it. It just turns the bulb display off (but the power light is still on), and then comes back to the message about going into power saving mode, and keeps looping.
The monitor works fine on any computer that doesn't require the mini displayport to vga adaptor, so I'm sure it's not the vga cable.
Also, I have tried all combinations of connecting the screen. I booted it in clamshell mode, not in clamshell mode, and attaching the screen after boot.
My only guess is that there is some incompatibility between snow leopard and the mini displayport to vga adaptor. Is anyone else having this issue? I called AppleCare and they of course blamed it on the monitor, but it works fine in several other computers (as long as the adaptor doesn't have to be used).

I have the same issue.
I'm using MacBook White (Mid 2007) and external Samsung SyncMaster 205BW (at least I've been using…). My external display is connected via DVI and MiniDVI to DVI adapter.
The symptoms are the same.

After installing Version 5 I get an error message about incompatibility and min and max versions.

I shutdown Zone Alarm, and deleted the contents of the file, which contained the "exe" file, then reinstalled Firefox version 5.0. I still get the XUL Runner error message about incompatibility of Version 5.0 with min and max 5.0.1. What next?

The updater wasn't able to update all the files and some were left as older versions.<br />
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

Incompatibility between iTunes 11.1.3 and Apple TV?

Up until a few days ago, our 3rd generation Apple TV, purchased in August 2013, permitted home sharing with our iTunes music library without any problem. After having gone through every troubleshooting suggestion, we can no longer access the iTunes library. We can still view movies, movie trailers, YouTube, Smithsonian, Vimeo, etc. Even though home sharing is set to "on" for both iTunes and ATV, the iTunes music library refuses to open. This 3rd generation ATV is connected with an eithernet cable, a connection I assumed would guarantee fault-free operation.
Our older ATV is 2nd generation and its connection is wireless. Thus far this older ATV has no problem gaining access to our iTunes music library.
Is there an incompatibility between iTunes 11.1.3 (8) and the 3rd generation Apple TV that could be causing this trouble?

No, there is no compatibility issue.
There is a network issue causing problems. Most AirPlay issues boils down to a networking issue, especially when one ATV connects and the other does not.

Nulware incompatibility

Similar Messages

Maybe you are looking for