Num lock problems after start

I have just startet my HP Pavilion 500-106eo today with windows 8.1. The problem is, that num lock is off after start and restart, and bios is set correctly to on and value in H-key is 2 ( num lock on after start) I have tried to shut down fast start up and it didn't work either. I can manually set num lock on after start....Help me solve this issue, please.
This question was solved.
View Solution.

Eskil4930, welcome to the forum.
The reason that you can't change "fast startup" is because you have to click on the phrase at the top of the page "Change settings that are currently unavailable". Once you click on it the settings that you weren't able to change will become available. Uncheck "Turn on fast startup (recommended) and close the Control Panel and restart the computer.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Num Lock problem after windows7

Hello
since the installation of windows 7 home premium on my HP Pavillion dv9040ea Notebook, it is not possible anymore to use the numbers of the Number Block together with the letters on the Main Keyboard block. It means: when I want to type numbers with the help of the number block on the right side, I need to press the button NUM to switch it on. Then the numbers there work. BUT therefore, the letters of the main keyboard block do not work! ( I live in Germany by the way and use German ). There are some letters where when I press them there does not appear this letter but a number on the screen. when I presse NUM again to switch it off, the letters work perfectly again but the numbers of the number block don't - there instead the page down/up etc is activated.
How can I get it back that I can use the numbers on the right side while using the letters of the main keyboard?
I've tried through execute OSK.exe and regedit initial keyboard indicators, no success. In BIOS I don't find any option for NUM lock.
Thank you all!

I don't think it is serious enough to return it. I have problems with my num lock and caps lock keys also, but I think it is a problem with the PMU firmware. Quite a few people are having an issue, so I don't think it is a hardware problem.
There are also people having other problems related to the PMU, such as the coloured lines at startup. I suspect we will see a firmware update at some point that can hopefully fix it.
My advice would be try resetting your PRAM with command-option-p-r at startup (until you hear the second chime). Or resetting the PMU by turning off the 'book. disconnecting power and taking battery out, then pressing power button for 5 seconds. Then turn it all back on again and it should be ok.
Stay away from 10.4.7 too, it's just trouble.

Num lock problem - Keeps flashing

I've got a num lock problem on my new Macbook at the moment. It keeps on flashing randomly, even when I don't use it. And when I press it when the led isn't on, it doesn't do anythin. Any ideas what might be wrong?

I don't think it is serious enough to return it. I have problems with my num lock and caps lock keys also, but I think it is a problem with the PMU firmware. Quite a few people are having an issue, so I don't think it is a hardware problem.
There are also people having other problems related to the PMU, such as the coloured lines at startup. I suspect we will see a firmware update at some point that can hopefully fix it.
My advice would be try resetting your PRAM with command-option-p-r at startup (until you hear the second chime). Or resetting the PMU by turning off the 'book. disconnecting power and taking battery out, then pressing power button for 5 seconds. Then turn it all back on again and it should be ok.
Stay away from 10.4.7 too, it's just trouble.

W530 Num Lock problems with VMWare

All, I am having a major problem with VMWare and the W530 "Num Lock". When I move the cursor into the VMWare window a message comes on say "NUM LOCK: ON" when I move it out of the VMWare window I see message "NUM LOCK: OFF". I do not have any key on the keyboard to disable Num Locl. There are utilities I can run in the SUSE VMWare image to capture the key binding and remap, but I do not have anyway of turning Num Lock on or off to capture
the key binding.
Suggestions ?
Solved!
Go to Solution.

Hello and welcome,
A couple of things you might try. Don't know if they'll work on your W. They do work on some other Lenovo machines.
Plug in a USB keyboard that has numlock. Use that and see if it sticks after reboot.
Use the on-screen keyboard. Click "options" and enable numeric keypad. That should add a keypad and NUMLOCK key to the on-screen keyboard. Use that. See if it works - and if it sticks.
(Windows 7) Start -> Accessories -> Ease of Access -> On-Screen Keyboard.
A little more detail here: http://www.beezmo.com/geezblog/?p=259
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

MacBook Pro (Retina, Mid 2012) - Boot Camp/Win 7 - Num Lock Problem

Hey,
I have a client who has a MacBook Pro (Retina, Mid 2012) who is experiencing a problem when booted into Windows 7 via Boot Camp in that he cannot type certain character like # (hash character by keystroke alt + 3) without Windows 7 error bleeping at him. He needs the # character as part of his password for logging into webmail.
The Boot Camp setup has the latest Boot Camp drivers installed (this was a fresh Boot Camp setup/install today) and every other part of the hardware works I suspect that this problem is not a key mapping problem but more something to do with Windows registering Num Lock as being active.
If the problem is that Num Lock is enabled then what is the keystroke to disable Num Lock? I thought it was fn + 6 but did this change since the Unibody MacBooks?
I understand that there are ways of resurrecting number pad fuctionality as decribed in the MacWorld article (see link below) but this is a Mac OS X System Preference and as such would not operate when booted into Windows via Boot Camp.
http://www.macworld.com/article/1142609/ressurect_numberpad.html
Any advice will be greatly appreciated.

You have Graphics card problem.
Take it in Hardware problem:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
see if this applies http://appleinsider.com/articles/12/11/13/some-15-retina-macbook-pro-users-compl ain-of-graphics-issues-after-efi-update

Strange caps lock / num lock issue after sleep

When I return to my desktop after the macbook has been put to sleep sometimes the CAPS LOCK / NUM LOCK are activated on keyboard. Actually it's not activated, it is only the small green dots on the keys that shine, however when typing anything it's not in CAPS.
This is really strange and I have no idea why this happens? Any one else got this, and/or a possible solution?

sorry for this dubblepost. Anyway please answer my question
Message was edited by: sebrock

WRT54G ver. 6 locking computer after starting online games.

I just recently bought a wireless router for my new Nintendo Wii. I got the wireless router up and working perfectly fine. I can even get on the internet from my Wii. My computer browses the internet completly fine. I probably should add that my computer is connected directly into the router. That connection is not wireless, only the Wii is.
That is, until I start World of Warcraft(WoW). The game starts, and it isnt until I start loading my character that the problems arise. My computer freezes for about 20 seconds, then unfreezes for about 5 seconds. Then it freezes again. So, during one of the unfreezes I close WoW. The freezing cycle remains for another minute or so. Then I get control of the computer again.
After this happens, my internet connection completely goes down. I have to disable my local area connection, then re-enable it. Then my internet comes back up and works fine.
Does anyone have any solutions? I am considering taking it back and switching it for a different brand.Message Edited by Neo9900 on 12-16-200609:20 AM
Message Edited by Neo9900 on 12-16-200609:20 AM

The version 5 & 6 have a tendancie to freeze or lockup when they get swamped with packets. I think it has a lot to do with the reduced memory. This forum and many others have people posting with the same problems with the same routers. If you were to stay with Linsys I would advise you to look at the WRT54GLv1.1. Has twice the RAM and Flash Memory so it can handle the load.
I have a WRT54GL and WRT54Gv3. I can download torrents, play Call of Duty while one son is playing XBox and the other plays WoW on his desktop and the wife is surfing wirelessly..
Message Edited by wehowardjr on 12-30-200602:54 PM

Problems after starting the Enterprise Manager agent

Hello,
I have a problem, the agent of the enterprise manager does not start, do not know how I can do to reinstall the agent, in executing the command emctl start agent, inevitably show that the agent can not be started, I've done many things and not know what else can do, I have the version oracle 10gR2 10.2.0.5.0 on AIX 6.1, additionally do not know what operating system processes or daemons must be up to work.
thanks for the help you can give me

Look, this is the result of instructions:
[saray]]/etc/rc.d]>emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.5.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://saray:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /oracle/app/product/10.2.0.5/saray_UFPS/sysman/log
[saray]]/etc/rc.d]>emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.5.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://saray:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /oracle/app/product/10.2.0.5/saray_UFPS/sysman/log
[saray]]/etc/rc.d]>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.5.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://saray:1158/em/console/aboutApplication
ps: invalid list with -o.
ps: illegal option -- -
Usage: ps [-ANPaedfklmMZ] [-n namelist] [-F Format] [-o specifier[=header],...]
[-p proclist][-G|-g grouplist] [-t termlist] [-U|-u userlist] [-c classlist] [ -T pid] [ -L pidlist]
[-@ [wparname] ]
Usage: ps [aceglnsuvwxX] [t tty] [ProcessNumber]
Starting Oracle Enterprise Manager 10g Database Control .... started.
Logs are generated in directory /oracle/app/product/10.2.0.5/saray_UFPS/sysman/log

Problem after starting OracleMSCSService on standby system

Hello All,
Platform : Windows-2008Server 32 bit,Oracle10gStandard,OracleFS 3.4
I have two cluster nodes with Microsoft clustering and Oracle Fail Safe. All my services were up and running on primary node but the OracleMSCSService was offline on the standby Node.
Now I want to know, If I manually start OracleMSCSService on the node which is standby at that time, does this cause Fail over to happen (i.e. Switching resources and services from primary node to standby node).
I encountered the following errors and failover happened when I started the OracleMSCSService on the Standby node
Error 1) Is alive poll failed on resource OracleOraDb10g_home1TNSListenerFslnjseprdb with error code 1
Error 2) Error bringing resource OracleOraDb10g_home1TNSListenerFslnjseprdb online with error code 10066.
I am trying to understand what went wrong and why did Failover happen after my above action?
Edited by: user5865877 on Mar 4, 2010 7:27 AM

Any idea on this buddies, haven't anybody is using Oracle Fail Safe
Edited by: user5865877 on Mar 4, 2010 8:13 PM

KEY LOCKING problem after updating to belle in e6

after updating to belle, it is difficult to unlock/lock using the trigger... Suppose if the phone is locked, when the trigger i locking pulled, it unlocks for a second and gets locked again.

Reinstall the Firmware and check. I am not ssure about the compatibility, but if you re-install using the NSU may give better results.
Pl. post the results after you do this..

Problem after starting

Hello i have a macbook pro 13 inch from end of 2010 and sometime when i start my laptop and when the desktop apear evrithing is locked, i see my desktop but i can t use nothing, so i have to force the shutdown and restart until evrything ok.
Do someone know why sometime this thing happens
Exuse my french but i try to do my best in english
Fred

Any idea on this buddies, haven't anybody is using Oracle Fail Safe
Edited by: user5865877 on Mar 4, 2010 8:13 PM

Problems after Starting in Safe Mode

I booted my computer up in safe mode in order to resolve a separate software issue. When I restarted my computer, I got to the blue screen with the apple logo and the spinning progress icon, and it just stays there for about a minute and shuts down again. Now I can't get past this screen no matter what I do. I tried holding down shift for safe mode again with no luck.
Any suggestions would be greatly appreciated.

Try resetting PRAM:
Restart Mac while holding down "option/alt", "command", "P", "R" (all 4). Keep all 4 keys depressed until the audio signal is heard 2 times (some say 3). Hopefully, this may solve your problem.

MacBook starts with caps lock and num lock ON

From time to time after upgrading to Leopard, my caps lock and num lock lamps are lit after startup. However, all other keys work normally, caps lock and num lock are not actually turned on. Is there a way to avoid this misbehaviour?

Do computers have child diseases? My computer's immune system now seems to have taken care of the caps lock/num lock problem. I haven't had any inverted startups in weeks now. Very strange!
In my experience, the treatment is to ignore the fact caps lock/num lock is lit, and to restart the computer. If you need to log in to restart, do it as if startup was normal, since caps lock/num lock is not actually turned on.
And hope for the natural healing.
Does anyone have different experiences?
/Joachim

MacBook Keyboard Caps Lock and Num Lock are working in reverse!!!

Ok, this sounds very strange...my keyboard on my MacBook only works when both the num lock and caps lock keys are depressed (so the green lights are illuminated). if the num lock is off then the keyboard does not work. if num lock is on and caps lock is off then the keys only type in ALL CAPS. if both num lock and caps lock are on (green lights) then the keyboard behaves as it should--except it's supposed to be that the num lock and caps lock keys should be off! I've checked system prefs for keyboard and mouse and for universal access, i've reset to defaults, i've restarted the machine...NOTHING works!
Has anyone ever seen this before? Any clue what to do?
thanks
Mark

Do computers have child diseases? My computer's immune system now seems to have taken care of the caps lock/num lock problem. I haven't had any inverted startups in weeks now. Very strange!
In my experience, the treatment is to ignore the fact caps lock/num lock is lit, and to restart the computer. If you need to log in to restart, do it as if startup was normal, since caps lock/num lock is not actually turned on.
And hope for the natural healing.
Does anyone have different experiences?
/Joachim

Problem with Caps Lock and Num Lock after 10.5.1

I noticed after updating to 10.5.1 my caps and num lock lights were on, i thought this odd as I did not push the buttons, pushing the buttons to turn the lights off however actually turns the caps and num lock features on.
In short, the light is backwards! when caps is OFF the light is on and when caps is ON the light is OFF!
the same is true for the num lock key/light...???
anyone else notice this problem?

Same exact problem... after updating I noticed that my numbers lock and caps lock were on. Didn't think much of it so I turned them off and then I notice that they are working in reverse. Caps lock on gives me lower case letters and numbers lock on I only get the symbols associated with that key above the number....mmmmm.
Anyone found a fix yet? I have looked in preferences and other places but found no solution.

Num lock problems after start

Similar Messages

Maybe you are looking for