Number 3 on pad not working

The number 3 is unable to be activated whne entering digital data.

But if an external keyboard works then it's not software. I mean, a PRAM and an SMC reset may help a tiny bit into the issue but that's all i can do.
If you REALLY want to know about that, go to system preferences, keyboard;
Where it says "Show Keyboard & Character Viewers in menu bar. Tick that.
Then, at the top left of the menu bar, you will see this icon;
That should allow you to select the keyboard viewer, which will look like this;
Then hit the keys and they should highlight. If they don't, they are not recognised with the system.
A straight-forward test would be to try it in recovery (Hold command+r straight after power-on)
Let me know how you go with that

Similar Messages

  • Some time tech pad not working correctly

    I am buy a HP Pavilion laptop from awok.com. Some time mouse teach pad not working correctly some time open windows 8.1 time bar and some time i am using mouse teach pad then automaticly come right click popup menu coming some time i am try to scrol the page using mouse pad then automaticly Select all from the page so please help me

    Hello @BABUMON ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Notebook and mouse freezing. Here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
    If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
    I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number.
    How Do I Find My Model Number or Product Number?
    Please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Tac pad not working correctly

    tac pad not working correctly

    I assume you mean "track pad?" If so, how is it not working? Be specific. If not, what do you mean?

  • Skype number is suddenly not working for me and my...

    Skype number is suddenly not working for me and my colleagues to RECEIVE outside calls.  Any ideas?
    When I try to call my skype from my cell, it doesnt ring on either end.  It appears connected on the cell phone since the counter clock for the call is increasing, but it doesnt ring or connect.
    This is the same for me and at least 2 of my colleagues.  It was working all day, till suddenly it did not.
    When outside people call, it just gives us a missed call or voicemail email, but does not show a missed call on our skype.
    When I call an outside number from skype, it connects.
    Thanks for any help ASAP!

    I think this might have been happening to me earlier.  If you wait like 30 seconds when you called a machine said "All circuits are busy. da da da".  I was looking for an answer and google only brought stuff from like 2010.  It's working now after an hour or so.
    Sucks cause I use skype for work and was desperate to find a quick reponse but couldn't.

  • Touch pad not working with HP G60 operating on Windows 7

    I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
    I was using touch pad and wireless mouse interchangeably for past year.
    No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems.  On one occasion, i was not even able to type and that resolved after re-starting computer.
    There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment. 
    Would appreciate any advice about what is the problem and ways to resolve it.
    Thanks a lot!
    Mo

    Hi,
    The numbers are fine
    Try the following.
    First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
    Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
    When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this.  Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I received a tracking number that is not working!

    I didn't not pre-order my iPhone 4s 16gb until yesterday afternoon. I immediately got an order confirmation e-mail. Later in the afternoon, I received an email saying that my order had been shipped via USPS and they gave me a tracking number which did not work. I assumed it wasn't working because of the holiday and no mail service. I checked again this morning and it still doesn't work!  My bank account has still not been charged for my order, and when I check my order status on Verizon it states that its processing my order and the expected ship date is 10/21/11. Why would I get an email stating that my phone was shipped when everything else clearly contradicts that statement?

    Others have reported getting a USPS Tracking #.  Did you order any accessories? This would be the most likely explanation. Also note that the USPS is painfully slow in updating its tracking, sometimes its never updages, and other times it updates after the package has arrived. It's by far the worst tracking system there is and though it's gotten better, it still needs lots of improvement. And if you haven't been charged, it's most like not the phone. There are thousands upon thousands of people who ordered the 16GB at 3AM (or a little before) on Friday, and they haven't gotten their e-mails yet. 

  • HT201210 my i pad not work

    my i pad not work and when i do the restore from iTunes also not work just run until the battery finish !  what is the solution ?

    Try here:
    https://discussions.apple.com/community/developer_forums?categoryID=164

  • HT203712 I have a 2011 tahoe.  My bluetooth functioned properly until I updated my iPhone.  Now the iPhone connects to the Tahoe but when I try to call a number it does not work.  Either it cals the number and has no outgoing or incoming sound or it just

    I have a 2011 tahoe.  My bluetooth functioned properly until I updated my iPhone.  Now the iPhone connects to the Tahoe but when I try to call a number it does not work.  Either it cals the number and has no outgoing or incoming sound or it just says it iis unable to complete the call.

    I would check with the Auto dealer where the vehicle was purchased to check and see when the bluetooth software was last updated on your vehicle. With the vehicle being a 2011 and if the software has not been updated since the dropping of IOS 7 then obviously there will be software incompatibilities.
    Good luck.

  • HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND HELP

    HP Pavilion Volume Touch-Pad NOT WORKING
    I have an HP Pavilion dv3t - 2000, Windows Vista computer. 
    SOMEONE DID ALREADY HELP ME HERE WITH THIS PROBLEM BUT THEY STOPPED RESPONDING | Please check that link out!
    The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
    I don't know if I uninstalled something or what but I need this problem fixed!
    Thanks!

    Hi,
    Shut down the notebook, unplug the AC Adapter and remove the battery.
    Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery.  Hold down the power button for 30 seconds.
    Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run.  The 'Try it' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Synaptics Touch pad not working

    Hi there,
    My Synaptics Touch pad not working.
    System:  HP ProBook 4540S, MS Win8 x64 Ent.
    Please advise.
    Thanks in advance!

    Hello needsnow,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your Touchpad on the HP ProBook 4540s running Windows 8 is not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • All button and touch pad not working except power button

    I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

    Sometimes electrical components needs to have all power sources removed and reintroduced to work properly.  Try performing a hard reset first, if it doesn't work then we'll move to the next step.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • My hp 430 pc touch pad not working

    my hp 430 pc touch pad not working. please help me

    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Touch pad not working properly for iphone 4s

    touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

    Try here >  iPhone:  Troubleshooting touchscreen response
    Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
    Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
    Update the software of your iphone or restore the phone to its factory settings

  • Touch pad not working of my laptop 48510s help for the same

    touch pad not working of my laptop 48510s help for the same

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • HP Pavilion Volume Touch-Pad NOT WORKING | NO SOUND

    HP Pavilion Volume Touch-Pad NOT WORKING
    I have an HP Pavilion dv3t - 2000, Windows Vista computer. 
    The volume touchpad above the keyboard is not working properly (There is no sound coming out of the speakers or the headphone jack) , If you touch the megaphone part of the touchpad above the keyboard then it stays red, however the sound icon on the taskbar changes from mute to unmuted when you touch the red megaphone. The volume slider on the touchpad works suprisingly.
    I don't know if I uninstalled something or what but I need this problem fixed!
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Shut down the notebook, unplug the AC Adapter and remove the battery.
    Follow the procedure detailed on Page 63 of your Maintenance & Service Guide to remove the RTC battery.  Hold down the power button for 30 seconds.
    Leave the notebook for 10 minutes and then re-insert the RTC battery, re-assemble and replace the cover, insert the battery, plug in the AC Adapter and start the notebook.  Tap away at f10 as soon as you start the notebook to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    If you still have no audio and the installer you downloaded previously still doesn't detect the Hardware, it would start to look like a Hardware failure, but to try and rule out any further software cause, try the following.
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run.  The 'Try it' option runs the OS from the CD without the need to install on your HDD.  If this runs Ok ( it will be slow running from a CD ) and you still have no audio output, this would tend to confirm a Hardware issue.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Apple wired keyboard.  Number pad not working with Windows Office 07 via bo

    I have a 27' Quad core i7 with windows 7 loaded via bootcamp. i have Office 2007 loaded in the Windows partition.
    My problem is that the number pad on my wired apple keyboard does not work in excel or word. The number at the top of the keyboard work fine.
    Has anyone found a solution please.
    Message was edited by: Fernbergjim

    Hi,
    does the numpad work in other Windows programs, or is it just the MS Office programs ?
    Have you tried the 'clear'-key (the one above the '7'-key on the numpad) to enable the numpad ?
    Regards
    Stefan

Maybe you are looking for