Number assignment for ML document is incorrect

Hi,
There is an Idoc Number  which should result in posting IR document in the PO , but the Idoc results in Error  due to the Error message "Number assignment for ML document is incorrect".
Can any one help me to resolve this issue.
Thanks,
Sridhar Reddy.G

Hi,
You can check out the following:
1.Whether the number range assignment is internal or external.If external,you need to assign correct document number.
2.Check out the number range assignment for document type ML as well as check the number range assignment in FBN1 for ML document type.
Regards
Aravind
Assign points if useful

Similar Messages

  • EDI Error : "Number assignment for ML document is incorrect"

    Hi All,
    We are getting the below error in EDI invoice generation.
    "Number assignment for ML document is incorrect".
    We have checked the number range for Material Ledgers. And the status is fine.
    We are using EDI for Inbound invoice creation.
    Can any body please guide us to solve this issue?
    Regards
    RS

    Hi Srikanth,
    The document types are assigned to the Parnter. But how will it be related to the Material Ledger.
    We are getting the error while number assignment for Material Ledger Document.
    Did we miss any settings are missing related to Material Ledger?
    Regards
    RS

  • OMBA: Define Number Assignment for Accounting Documents

    Hello exparts,
    I ask about operation in "Allocate document type to transaction" at t-code OMBA.
    Can we insert new entries?
    If yes, please tell me how to.
    Thank you and regards.
    Emma S

    Hi
    There is a posibility that someone should have tried entering the number range assignment and missed the storage location during this activity
    regards
    Jagadish

  • Number ranges for material document (migo) and inventory  documents

    Hi Gurus,
    We need a different number ranges for goods receipt documents  and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
    If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it  is the single transaction code used by different companies and how to give different number ranges.
    Regards,
    Sri........

    Hi,
    I think number ranges of inventory documents are on client level not on company code wise . because even though  your creating new document and assigned different number ranges for the documents but  these while assigning  ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level  not at company code level.

  • Define a number range for settlement documents

    Hello,
    We are getting below error while doing T-code AIBU asset settlement.
    Define a number range for settlement documents
    Message no. KD 522
    Diagnosis
    No number range for settlement documents defined in controlling area ACA2.
    The settlement document is a document type in its own right, which is used for cancelling settlements and repeating month-end closes.
    Procedure
    Define a number range for settlement documents. Choose Maintain number ranges for settlement documents.
    Thanks,
    Ratnam

    Hi......
    Try to use the following T.code : SNUM,
    1. Group -> Maintain and Group -> Insert
    2. Give your number range a description.
    3. Specify one interval for the number range. If you use up this range, you can add more intervals.
    4. Select one or more of the controlling areas listed in the block "Not assigned".
    5. Place the cursor on the number range to which you want to assign the selected controlling areas.
    6. Use Assign element group to assign the controlling area(s) to the appropriate number range and save your entries.
    Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted. Note that the appropriate application table is also transported for number range objects used for group maintenance.
    And use :OKG6
    I hope you will get some idea.
    Regards
    vamsi

  • Extenal number range for biiling documents

    Hi friends pl guide me  how to give external  number range to the billing documents. We have already tried with user exit_number_range but I am unable to put the number in the billing document. pl let me know where to put the number.

    Hello,
    It is advisable to use internal number range assignment for billing document as repetition in billing document would cause
    business irregularities. But if you still want to proceed then you have to use the user exit "exit_number_range". Before starting
    the coding work, please ensure to define the number range in the SPRO setting with external range check box ticked. Then with
    the help of ABAPer, try to develop a logic so that external number range will be embedded on the document while saving.
    Regards,
    Sarthak

  • External number range for billing document (Invoices)

    Hi guys,
    I have a requirement from one of client to implement external number range for billing documents.
    I can only see a provision for internal number range in customising for Billing document type.
    Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
    Thanks, Felix

    Hi Felix
    I think the similar requirement is in Venezuela also.
    So pl. check the SAP Note 849438 . As per the note :-
    The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
    1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
    2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
    3. If you are implementing the note in release 4.6C, please create the following function modules:
    o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
    o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
    o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
    4. Implement the source code corrections as shown below.
    The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
    1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
    2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
    3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
    Regards
    Amitesh

  • External number range for Sales Document

    hi,
        I have a requirement to generate external number range for sales document. I tried this user exit (MV45AFZZ) to generate external number.
    FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
    Endform.
    between these form and enform i written my logic and passing to US_RANGE_INTERN. But can one suggest where to write to generate external number range.
    Can any one help me out.
    Thanks and regards,
    Vijay.

    Hi
    Here you can assign a different number range for your sales order.
    The number range is linked to the order type (field VBAK-AUART), this link is done in customizing.
    It usually uses this routine if it can't assign the range in customzing because (for example) for different sales area it need have different number ranges for the same order type.
    So you should create an external range by trx SNRO and then assign the number before entering in the main screen of va01 or saving the document.
    When you need to assign the number depends on how you want to manage your range.
    If you assign the number in entering you has to make sure to not assign the same number document to severals order to be created in the same time by several useers.
    Max

  • Year wise Number Ranges for Sales Documents

    Hi,
    Can any body tell me how to reset number ranges of SD Documents when fiscal year chane.
    Thanks

    Hi Kapildev,
       In standard functionality this function is not there you need to look forward for user exit. 
       Check this:
       User exits in the program MV45AFZZ
    USEREXIT_NUMBER_RANGE 
    Use this user exit to define the number ranges for internal document number assignment
    depending on the required fields. For example, if you want to define the number range
    depending on the sales organization (VKORG) or on the selling company (VKBUR), use
    this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    Thanks,
    Swamy H P

  • Number range for material documents

    Hi SAP Gurus,
    Can anyone please advise if we can reset number range for material documents once it reached to last number for existing number range ?
    Thanks & Regards,
    Manoj

    Hi,
    If material numbering  reached to last number for existing number range, you can create Number Range Text Group and assign to your material type in following path
    IMG -> Logistic ->General -> Material Master ->Basic Settings ->Material Type ->Define Number Range for each Material Type
    OR
    T.code:MMNR
    Lets example you have now:
    Number Range Text Group:01
    From Number:     1
    To Number     :19999999
    Now you can create Now One Number Range Text Group
    Number Range Text Group:02
    From Number:20000000
    To Number     :29999999
    Now assign Number Range Text Group to your material type in MMNR , {{by clicking group in menu, select maintaion->group->insert
    Number Range Text Group:02
    From Number:20000000
    To Number     :29999999
    and save}}.
    Regards,
    Biju K

  • Define Number Assignment for Goods Receipt/Issue Slips

    Hi Experts,
    please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
    Customizing for this functionality is composed by the following points:
    1. functionality activation at plant level
    2. number range group/interval code assignment
    3. Groups and intervals creation
    4. Plant / Storage Location / Movement type combination assignment to number range group.
    Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
    You receive a message from SAP that you have to insert the relevant object manually into transport request.
    Please can you tell me exactly what I have to put into transport request as object:
    - Program ID     (I think R3TR)
    - Object Type
    - Object name
    and any other relevant information with all the details.
    Thank you very much
    Kind Regards
    Andrea.

    Hi
    You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
    Reward points if usefu;
    Thanks & Rgards
    Kishore

  • OMX4 - FBN1 - Number range for Material document and FI document

    47 - is for FI document number range in Material ledger FBN1.  OMX4 gives number range for Material document.  My question is how big the number range must be?  Since thousands of Materials involved, I couldn't imagin this?
    Anybody knows, how to determine the size of no. ranges in Material Ledger configuration?  SAP simply says, check no. ranges whether it meets the requirement....
    I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
    I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
    Cheers,
    Ashok

    What is the number range you are using? Year Dependent or Independent?
    When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
    The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

  • Error occured in number assignment for object RESB

    Hello all,
    While creating the production order, I am getting error as "Error occured in number assignment for object RESB" ,
    How to solve this error?
    Regards,
    Sagar

    In SNRO for Object RESB, check the definition i.e. the intervals, number ranges assigned, the buffer setup. If you're not familiar with this, seek help from your basis personnel.

  • Internal number assignment for object AUFTRAG

    Hello,
    Previously with SAP PM module we had configured the maintenance work order number range for internal assignment to a narrow range of numbers i.e. 12000000 to 12999999.
    Following rolling out the functionality to other sites, we required to extend the internal number range (to accomodate the volume to be produced) and have updated this in configuration i.e. 300,000,000,000 to 399,999,999,999.
    We are now experiencing an information message each time we Save a new maintenance work order;
    Internal number assignment for object AUFTRAG (numbers are in critical area)
    Message no.  RU 153
    When the user clicks Enter to continue a warning message is also displayed on the status bar;
    Number XXXXXX for order type XXX within critical area
    Message no. CO 395
    However, we have investigated this and the work orders are creating normally after this. We have created in the system, the work orders with the prevous number range and also hunders of work orders with the new number range, we do not appear to be experiencing our buffer.
    I have check the settings in SNRO config setting. The settings appear as standard with a warning buffer of 5% and the No. of numbers in buffer = 20.
    Please can anyone advise how to remove this information message or how to update the system to resolve.
    Regards,
    Hayley

    The message is given by the number range function, according to the configuration of field percentage. You have entered 5% - which means when you reach within 5% of the end of the numbers, you should get the warning. Your range is 300,000,000,000 to 399,999,999,999 My calculation that you should get the warning around 395,000,000,000
    I suspect that the issue is linked to buffering of the numbers. Is it resolved??

  • Internal number assignment for object

    Hi Experts,
    While creating PM order the error comes"Internal number assignment for object AUFTRAG"(numbers are in critical area).
    I am not able to create order.
    Please help.
    Regards
    Vishal

    Hi Vishal
    Your number range might have exhausted, you need to extend it through T-code SNRO. number range object (AUFTRAG). click numbr range button then change interval & extend the to number
    shakti

Maybe you are looking for