Number doesn't port to facetime

Hello all,
I activated my new iPhone 4 with one number and then had my old number ported to it. Now, calls can be made to the iPhone using the new (ported) number, but facetime is still associated with the old number. I have one number for voice calls and a completely separate number for facetime. Is there a way to change your facetime number?

I'd say to take it into an Apple store. They can contact AT&T from the store, if needbe. That'd probably be the best and easiest way to handle it.

Similar Messages

How to change the Number of IVR ports in a UCCX?

I know this question has been asked before but it needs to be asked again, as previous answers do not seem to apply.   The simple quesiton is: If you have a UCCX and if after install you check you check License information and you note that you have 150 IVR ports; how do you increase the number of ports to 300?
I have been told that the number of ports is set by the class of the machine hardware and is not a license issue.   Others have suggested it is a license issue?   At the end of the day, however, I want a step by step procedure for adding more IVR ports to my deployment.   Even if that means buying more licenses (though I can not find a SKU).
I have several clients that have UCCX and are having calls that exceed the number of IVR ports.   Before we get into a discussion of CTI ports or Call Controll Groups, let me identify that I think they are the same.    I can create a CTI Call Control Group with 300 paths, but if I only have 150 IVR ports I am in serious trouble on the 151 call!
I had a lab system that installed under vmware with 150 ports. No matter how I tried to configure the CVA it always came up 150 ports!   I added a NFR license to my lab and magically it turned it into a 12 IVR system, so licensing does have something to do with it!
I have htis experience on Version 8 and now on Version 9!   I need more IVR ports than appear in the installation. I want to know exactly the steps needed to increase the number of IVR ports to the maxium of 300 for an enhanced system!
I can refer CISOC TAC to several tickets I have opened on this subject all with unsatisactory answers! Most recently 626743961
Peter Buswell (aka DrVoIP)
http://blog.drvoip.com

Here's the long answer
Peter Buswell wrote:I know this question has been asked before but it needs to be asked again, as previous answers do not seem to apply.   The simple quesiton is: If you have a UCCX and if after install you check you check License information and you note that you have 150 IVR ports; how do you increase the number of ports to 300?
Since I see below that you mentioned that the system in question is Enhanced, the answer is simply, install on faster hardware. Presently the best hardware you can get is VMWare ESXi with the 400 Agent License OVA, which gives you 400 IVR Port Licenses.
Standard licensing works the same as Enhanced, as far as IVR Port licenses go.
If you were wondering about Premium, then it's a 1:2 ratio of agent:ports. You cannot buy Premium ports directly, instead you buy them indirectly through the process of buying Premium Agent seats. So if you had a Premium UCCX with 100 Agents, you would have 200 ports, and if you desired to have 250 ports, you simply buy 25 more Premium Agent seats. Premium does still need to adhere to the hardware limits. I have seen partners sell someone an Enhanced UCCX which gave them 300 ports, but they only had like 50 Agents. A year later, the customer upgraded to Premuim, but only bought 50 seats, and thus downgraded their port license count to 100. A third of what they had! The solution? Buy 100 more Premium Agent seats so your total goes up to 150 Agents, and thus your ports go up to 300.
Peter Buswell wrote:I have been told that the number of ports is set by the class of the machine hardware and is not a license issue.   Others have suggested it is a license issue?
These are both correct statements. Just remember, that it's licensed based first for Premium, then hardware limited. Standard and Enhanced are hardware limited only.
Peter Buswell wrote:At the end of the day, however, I want a step by step procedure for adding more IVR ports to my deployment.   Even if that means buying more licenses (though I can not find a SKU).
Again, for Standard and Enhanced, you need to move to bigger/better hardware to get more ports, assuming you're not already at the meximum of 400.
Here is the document which walks you through moving to bigger hardware: Disaster Recovery Guide
And for Premium, you need to purchase the SKU for a Premium Agent Seat license. It's a 1:2 ratio for agents:ports.
Peter Buswell wrote:I have several clients that have UCCX and are having calls that exceed the number of IVR ports.
I'm not a partner, nor in sales, but I thought there was an A2Q process which validates CC designs for sales people. At any rate, it sounds like they were either under sized or outgrew their overhead, and something needs to be done.
Sometimes you can simply dump excess calls off. Think about playing a high call volume message to callers and then drop them.
Other times you can drop them into voicemail, and come back to it later.
I've seen some basic call back functionality implemented with an external data source, which could alleviate ports.
Lastly, I've seen improperly designed scripts which loop on themselves or other scripts, causing a high port usage.
My point is that there's a few options here, outside of simply increasing the size of the server or purchasing new licenses. There's no one size fits all answer though.
Peter Buswell wrote:Before we get into a discussion of CTI ports or Call Controll Groups, let me identify that I think they are the same.
Are you saying that CTI Ports and Call Control Groups are the same? Or that CTI Ports/CCG's are the same as IVR Port Licenses? Cause the former is true, while the latter is not. Think "oversubscribed" CTI Ports.
Sometimes it is advantageous to oversubscribe your CTI Ports, to achieve a more dynamic environment. E.g., I have 100 ports, and all 100 are used for inbound calls. I develope a single inbound app, which is limited to 10 ports, and handles small bursts of calls. What happens is that, if the new inbound app is running, the most it can "steal" from the inbound calls is 10 ports. However, if the app is not running (because it doesn't run all day, it's mostly bursty in nature), I can still have my regular inbound calls go all the way up to 100.
Peter Buswell wrote:I can create a CTI Call Control Group with 300 paths, but if I only have 150 IVR ports I am in serious trouble on the 151 call!
This is true. Again, you need to decide if you really need the extra ports, of if there is some solution to solving this problem without making a hardware/license purchase. These kinds of problems still exist for customers at the 400 port level, and they don't have the option to "buy more."
Well, that's not entirely true. While you cannot grow past the 400 port limit today, you could install another UCCX instance on the same CUCM cluster, effectively doubling your capacity, but breaking your administration into two separate domains.
Peter Buswell wrote:I had a lab system that installed under vmware with 150 ports. No matter how I tried to configure the CVA it always came up 150 ports!
What's CVA?
Peter Buswell wrote:I added a NFR license to my lab and magically it turned it into a 12 IVR system, so licensing does have something to do with it!
The NFR is most likely a Premium license. Refer back to the 1:2 ratio, and that would tell me you have an NFR license for 6 Premium Agents. Installing a higher level license on a lower level licensed system brings the whole system up to the higher level. Recall my partner story about the Enhanced to Premium upgrade scenario.
Peter Buswell wrote:I have htis experience on Version 8 and now on Version 9!
The licensing doesn't change from 8x to 9x.
Peter Buswell wrote:I need more IVR ports than appear in the installation. I want to know exactly the steps needed to increase the number of IVR ports to the maxium of 300 for an enhanced system!
You buy bigger/better hardware, and use the link I provided above for moving to that new hardware.
Peter Buswell wrote:I can refer CISOC TAC to several tickets I have opened on this subject all with unsatisactory answers! Most recently 626743961
I would be surprised if there is a single Cisco TAC person who doesn't understand this simply IVR Port licensing model. Perhaps there was some miscommunication about what was being asked, and what answer was being given.
I hope that helped to clarify some things for you. Also, if you are a partner, reach out to your CAM and ask for a one on one with a UCCX guru who can sit down with you. Cisco would want you to be successful with selling their products.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

I have an iPhone 5 and updated it to iOS7 but now I can't use iMessage or FaceTime as it says "waiting for activation" and won't let me use my phone number to do iMessage or FaceTime either

I have an iPhone 5 and updated it to iOS7 last night but now I can't use iMessage or FaceTime as it says "waiting for activation" As well as that, it won't let me use my phone number to do iMessage or FaceTime it will only let me use my apple ID which I don't want to do.

Thank you for replying. Yes I deleted the old email address..

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response.

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?

Look here
Order product | Platform, language swap

HT1758 Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB", mine starts with a "W." Purchased direct from Apple August 2007.

Are all Intel 24" iMacs w/Snow Leopard OK for Mountain Lion? My serial number doesn't match any of the one in the iMac ID list; they all start with "MA" or "MB" and mine starts with a "W." Purchased direct from Apple August 2007.

Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Open System Profiler and report what you find displayed for the Model Identifier.

I am trying to instal CS5 onto my new computer. My other one was stolen. Serial number doesn't work.

I am trying to instal CS5 onto my new computer. My other one was stolen. Serial number doesn't work.

if you can't find your serial number (http://helpx.adobe.com/x-productkb/global/find-serial-number.html), you'll need to contact adobe support (http://www.adobe.com/support/chat/ivrchat.html).
if you can't find your installation disk: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

I've got an Adobe Photoshop CS6 Extended Student and Teacher Edition and serial number doesn't work

I've got an Adobe Photoshop CS6 Extended Student and Teacher Edition and serial number doesn't work

Get in touch with support. Also make sure you are not trying to input your eligibility verification code, but have converted it to a proper serial on the edu pages.
Mylenium

My Skype number doesn't display on the phone of pe...

I purchased a Skype number, and I can receive call on that number. However my Skype Number doesn't display on the phone of the people I am calling.

Hi, Julia-T, and welcome to the Community,
Have you seen this library of FAQ articles related to Caller ID?
https://support.skype.com/en/category/CALLER_IDENTIFICATION/
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Settings - phone - my number doesn't show up

My phone number doesn't show up in phone settings?
and on other iPhones it works.
Is there something to turn it on?

I have no idea what that means, unless you're talking about synch with iTunes, and that's not something we have done or will do. I bought these as presents because we can't keep our business cells on over the weekend or in the evenings without customers, reps and various suppliers calling us repeatedly. These iphones are for our use only and the numbers will NEVER be given to anyone else, ever.
These are stock, new iPhones, slated for Christmas stockings, and they will probably never have email on them, never surf the net, and the only contacts will be our two numbers. They are strictly set up so she & I can finally talk & text each other, bypassing our corporate phones which do not allow texting.
I had the Apple Store set these up, and neither phone knows what it's number is. How does this happen? Even the worst free cell phones know what their numbers are!

TS3367 How do I change the phone number in the veification of FaceTime for iPhone 4s?

How do I change the phone number in the veification of FaceTime for iPhone 4s?

troubleshooting facetime http://support.apple.com/kb/TS3367

My serial number doesn't work for Illustrator

First I've downloaded Illustrator trial and finally I bought the mastersuite. But now Illustrator is saying that my serial number doesn't even exist (that serial number works on other programs in the suite). What am I supposed to do ?
Thanks

Run the Creative Suite Cleaner Tool and reinstall everything. Also refer to this:
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Your Illu is still tied to your un out trial and you need to delete the locked license file so it will correctly run with the suite serial.
Mylenium

I bought adobe premiere elements 12 and my serial number doesn't work

i bought adobe premiere elements 12 and my serial number doesn't work

anthony2504
Did you just purchase Premiere Elements 12 - online download or installation disc?
Was the program ever installed by you a while back and are you trying to reinstall it now?
Are you sure that you are working with the serial number and not a redemption code?
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
When working with downloads and installs, please work with antivirus and firewall(s) disabled.
Please review and consider, and then we can decide what next.
Thank you.
ATR

Adobe says my serial number doesn't exist.

I need to download Adobe 8 onto my new computer after my old computer crashed but Adobe says my serial number doesn't exist. I have a screen shot of it though and they still say it doesn't. What do I do?

Hi Klayne,
We are sorry for the inconvenience caused to you.
Please send me the Acrobat 8.0 serial number using the Private message option on the forum.
Let check the serial number for you.

TS2565 when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

There was no new serial needed to update from Logic 9 to 9.1.7
If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
Otherwise, it's best to call Apple directly and get them to help you...

Number doesn't port to facetime

Similar Messages

Maybe you are looking for