Number files imported into iPad balloon in size when exported.

I know this is my first post to this forum. I have merely been a voyeur here for many years up until now. This has been my go to place for solutions over time and I have never been disappointed. I have d many threads relating to my problem majority are a dead end, meaning no replies, or they don't have a solution.
Still I'm stumped: When I load a spreadsheet created on my Mac into Numbers for iPad and make a minor change, the file becomes huge. For example, a 172kB Mac created spreadsheet becomes a 1.2gB Numbers file. The same happens with a Pgaes file (2kB becomes over 370!)
This just doesn't seem right. If anyone has any insight I would appreciate hearing from you.
Regards,

What export setting are you using?
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue including:
An Aside: If you use the Maximum Quality you will often end up with a Jpeg larger than the Jpeg you imported from. This is not because you've added more data to the file, just that you've not compressed it as much.

Similar Messages

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

XML files imported into SPRC are not properly loading associated data into SPRC

Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.

Hi EHS Gurus,
My Issue is - XML files imported into SPRC are not properly loading associated data into SPRC .
When am uploading the XML files manually its working fine in /TDAG/CPM00.
The same when we are uploading the XML files thru basis program IPC (XML) Documents into SAP , its not working .In XMl file it showing its complaint the same time compliance workbench complaint statues it showing empty .
for you reference pls see the attached screenshot .
Pls can you help me on this .
Regards,
Suresh.

About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it?

About Final Cut ProX: why a red line appears at the top o a file imported into a New Event? then when I restarted the Project that files comes as "Missed files" How can i fix it? Thank you very much.

Where are you importing from – a camera or computer? If you are optimizing at import, make sure the background processes are completed. (Command-9)
Russ

Anyone know how I can get an audio file imported into my iTunes' podcast directory, rather than the music directory?

Anyone know how I can get an audio file imported into my iTunes' podcast directory, rather than the music directory?
I downloaded a series of podcasts recently. They were imported into my "music" directory instead, making it more difficult for me to recall where I left off with the last podcast I listened to before having to stop it for whatever reason. Thanks in advance for any help.

You can do it, though the result isn't ideal. Import your episode, then select it in the Music list and hit command-i to bring up the info panel:
However each episode you do this with will turn up as a 'podcast' with no name - and it doesn't seem possible to give it one - containing the one episode:

Reduce Doc Size When Exporting

Is there a way to reduce a page size when exporting from InDesign? I have a 20 x 30 poster want to export at 50% and make the pdf @ 10 x 15. Thanks.

by print to pdf do U mean make a ps file instead of exporting, correct?
Well, here's the thing... the orig question was a generalization of what we are trying to do.
The actual file is 19 pgs of panels that are 20 x 30. We need to make pdfs for the client to look at on screen. The file is huge when we try to make pdfs by exporting... even at the smallest file size and then reduce file in Acrobat. We found that reducing the doc size & making pdf yields a much smaller and more manageable file size, but it takes very long to postscript. We were just trying to avoid that step. Thought for sure the was a way to reduce the output size when exporting.

Why won't some .gif files import into Adobe Premiere 11?

Hello! New to Premiere here.
I'm working on a project which involves processing roughly 200 animated .gifs taken from the internet. Many of them will import nicely into Adobe Premiere 11.
The problem is that not all of them will do this. Many of them will give the following message and freeze the entire import process.
This seems like a strange error message to get because
a) It seems to say here that the .gif format IS supported
b) There don't seem to be any codecs for this 11.
The gif that produced that error message is below:
What especially frustrates me is that a gif with similar resolution and size will import, but the one above will not. Below is an example of a gif that will import into Adobe Premiere 11:
Is there an explanation for why this is the case? I have looked up this issue extensively on the internet, and every other person with this issue seems either to be stumped or find a solution for a much older version such as Premiere 8.
Any help would be greatly appreciated.
Thank you!

I'm happy to announce to you all that my "mp4 importing" issues has been sorted out. Now I import mp4 shot with the same Windows Phone 8 Device into Adobe Premiere Pro CS4. Only that for the moment, it doesn't play as fast as with ordinary player.
But how did I get it to work, you may wonder;
I simply installed Itunes on the system, I also installed an app called media monkey. I can't say which of the apps did the magic but the next time I tried to import mp4 files into Premiere Pro after these installations, it imported seamlessly.
Obviously there's a link between the required codecs and the itunes itself.
You may want to try it and hope it works for you.
Kindly inform us if it works.
Thank you all.
Cheers.

RAW NEF files imported into Aperture from a Nikon D70 are dark

I imported one roll of images straight from the CF card from my Nikon D70 into Aperture.
I also imported them into Nikon PictureProject. (the current application I use)
All the NEF's in Aperture are darker than the NEF's in PictureProject. Has anyone else seen this issue?
Also, any NEF that I have previously edited and saved in Nikon Capture Editor, do not display any of the changes when imported into Aperture. Interesting that the Finder shows the thumbnail correctly. Has anyone else seen this issue?
Thanks, Scott K.

I've imported a few of the NEF files I've gotten from my D2X, and for the most part, they look fine. A little darker than when displayed in Adobe Bridge and ACR, but not that much darker. This is probably just the way the image converter is interpreting the RAW data. A couple of minor levels adjustments for me, and they look fine.
As for Aperture not "seeing" the changes made to a RAW file in Nikon Capture. That may be due to the way Capture applies its changes to the file. If when you make a change, Capture simply adds the adjustments to a side car file, etc., and doesn't change the original RAW file (which it should never do), then Aperture is only reading the original RAW data. The side car info is not understood by Aperture. At least not now.
This is pretty much the same way ACR works.
Jeff Weinberg

Difference in AE file Imported into PPro with MPE in Hardware vs. Software Mode

I am getting an undesireable result when importing AE files into a PPro Sequence with MPE in hardware mode. The top (or left) pic is accurate, with MPE in Software mode (nice soft glow). In the bottom pic, MPE is in Hardware mode. Note the undesireable (and inaccurate) harder glow. These AE files are output in an uncompressed AVI with alpha channel. The pics below were imported into PPro with the AE file placed over a black clip in PPro (Video Layer 1=Black. Video Layer 2= AE text w/Alpha). Any thoughts, or better yet, solutions?!

   Jim, so you're suggesting that I create my graphics in PPro instead of AE? That's not going to work! I must be one of the few people out there that output AE files with an alpha channel and import them into PPro, for I can't imagine Adobe not addressing this if many people were using AE & PPro together in this fashion. I guess I'm stuck having to continue to use MPE in software mode only (alpha channels work perfectly in this mode, but I have to do a lot of rendering.). I used to blame Matrox for this problem. Sure glad I haven't upgraded to a Titan!
   BTW, I get the same undesireable results in MPE Hardware Mode when using Dynamic Linked Comps to AE.
   One last question: does the quality of the video card make any difference with this alpha channel problem I'm having with MPE? I'd buy a Titan card right now if that would solve my problem!

What format video clips have to be to import into ipad 2

I have some video clips on my PC, but cannot synch into IPad2. What is the best format fot the clip to bring into IPad.

The supported formats, from http://www.apple.com/ipad/specs/, are :
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Text file imported into Hyperion report BQY

Hi,
I would like to know the internal process how Hyperion works in the scenario
1. The Hyperion report query in select * from emp
2. A text file containing list of emp ids has been imported into the report bqy
I believe the query which gets fired on the underlying database is still select * from emp. If so, is it true that the result set of the "select * from emp" then is filtered in the Hyperion server memory based on the emp ids listed in the text file which is embedded in teh report bqy?
I am using Hyperion 9.3.0.
Any input would be appreciated.
Regards,
Suresh

Try using the package UTL_FILE.
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_file.htm#998101

Minimising PDF file size when exported form KN on iPad

Hi guys
when exporting KN presentations as PDF's from my iPad is there any way to reduce file size?
I'm working in KN 2.5.1
on an iPad air
With iOS 8.1.1
thanks and appreciate any experience or insight
thanks
martin

There are no quality settings in exporting to PDF on the iPad, these settings are available on the Mac version.

Word Document only partially imports into iPad Pages

When I import pages from word documents my dropbox into iPad Pages only the first page imports. The rest is blank. This does not happen with QuickOffice, but I prefer to use Pages as QuickOffice is prone to crashes! Can anyone help me with this?

Symptom :
When embedding a pdf document into a Crystal Report, only the one page shows.
Reproducing the Issue
Environment:
Crystal Reports OLE object
Cause
An OLE object only displays the first page.
Resolution
Embed multiple objects, one for each page
Or
Use a hyperlink to the object instead
Hope this helps!
Regards,
Vinay

Why won't new files import into LR 3.6?

So, there are a couple of new .TIFs that I want to import into an existing LR folder. Under Import the window shows both of those new files, each checked, as the only ones not already in the LR library. So I click on import and one of three things happens: (1) they immediately import, (2) the window goes blank forever except for a message that there's nothing to import, (3) the window goes blank forever with a message "Import in progress...". This is infuriating, expecially since there appears to be no way to escape from this infinite import loop. Note: the newly named files open perfectly in PhotoShop when it is invoked outside of LR. What is LR seeing that PS is not seeing, and how do I correct this bug? Or at least make an orderly retreat from the infinite loop?

AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
GoPro http://forums.adobe.com/message/4486784
-below says Mac (Win process should be the same) but even GoPro says to convert to edit
-http://gopro.com/how-to-prepare-video-files-for-editing-apple-mac/
-use to convert http://gopro.com/software-app/cineform-studio/

Why doesn't my .AVi file import into iMovies

I cannot get iMovies to recognise my .AVI files (from my Samsung ST50).
I can download the files from my camera to my hard drive (so the computer recognises them), and I can play them via Quicktime, so I know they work. But I can't import the .AVI files into iMovies. It seems to process the video when I go to 'Import'>'Movies'...- then nothing appears. I just get a 'No Matching Video' message in the event folder.
However my previous camera (an old Pentax Optio S40) produced .AVI's which I can import into iMovies. Are all AVI's not the same? Or is it a setting in my new camera (I'm not too tech savvy!).

Hi Rocco,
Looks like we missed this post when you first asked. Sorry about that.
What message are you receiving when you try to print? What version of Windows do you have installed? If you're running Win7, you may be facing this issue: http://helpx.adobe.com/acrobat-com/kb/createpdf-desktop-printer-windows-7.html
-David

Number files imported into iPad balloon in size when exported.

Similar Messages

Maybe you are looking for