Number format, eg CSAP_MAT_BOM_READ

Hi,
I hope this forum will be the correct one ...
I want to get a Bill Of Materials from a remote system, for this I use the Function "CSAP_MAT_BOM_READ" with an RFC-destination.  This works correct, except that the numbers are returned in a different way. 
In the system I'm using a decimal number is normally given with a comma as separator for the decimal part ; so numbers come in the format 1,000 for representing the number 1. 
This format is also used in the function, but when the BOM is read with a RFC-Destination, the decimal separator is a point. 
Is there a way to change a setting that it uses the comma as well ? 
(The system where the BOM is coming from uses the comma as well, so it isn't the basic setting of the remote system which causes this)
Thanks,
Alain

Solved by correcting the user parameters for this ...
The RFC-user didn't use the comma ... now he (she? it?) does...

Similar Messages

  • COPA line item report, Number format  -output type - object list(ALV).

    Hi,
    I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
    But changes are not reflecting in- output type - object list(ALV).
    Please provide help in this.
    Regards

    HI
    What t-code you are using to write this line item report ?

  • Problem with the number format in the graph axis with Report Generation Toolkit.

    Hi!
    I'm trying to use the Report Generation Toolkit to plot some graphs in Excel.
    My first problem is that I don't know how to configure the number format in the Excel Set Graph Font.vi so that my numbers are correctly displayed in the graph's axis. The only given option is general (0,0) but this is not enough for me, my numbers can get really small so I need engineering notation or fraccional format.
    Second: I also insert a table with the graph source data, but the numbers are not correctly displayed either: for example: 
    0,75 is shown as: 
    0,750000
    but 1,25  is shown as: 
    1!250!000
    My guess is I am making to much or wrong string to number conversions or Excel is getting it wrong but I can't find my way...
    Can someone help me with this?
    Thanks,
    Isabel

    Here is my VI, it's just a trial so it can look messy...
    Thanks,
    Isabel
    Message Edited by Isa_pm on 01-22-2007 01:12 PM
    Attachments:
    Create report.vi ‏96 KB

  • Number formatting issue in Web intelligence report

    Folks ,
    I've an object called ' Serial number' (12 digits long) but when I set this in query filter as a prompt number format gets changed.
    Similar like this:  
    whereas I am expecting to see 123456789123 something like this.
    I made sure that object data type is number while designing universe as well as also format the object ( using format object option) and set as ############. ( 12times #) to forced as 12 digits number.
    When I drag this object in 'result objects' results shows fine but if i add this as 'Query Filters' number gets changed as above pic.
    Any advise ?
    Cheers,
    iTanzir

    Hai Itanzir
    Try to create a dimension variable in universe and choose the data type as string. Please check this and let me know for issues, if any.
    Regards,
    Amala.S

  • Number format issue in XML Publisher from OAF (',.' is replaced by 'u n')

    Hi All,
    I am facing a problem in XML Publisher report. In report I need to display some number fields with 'USD' format. In RTF, data type 'Number' and format '###,##0.00' is selected. If I run concurrent program from oracle core forms using System Administrator > Concurrent > Request, I am able to get correct number format.
    Ex : 123456.00 After Number format : 123,456.00
    Also its working fine from XML Publisher Administrator responsibility (using Preview).
    But problem is when I submit the concurrent request through OAF, I am not getting correct data. ',' is replace by 'u' and '.' is replace by 'n'.
    Ex: 123456.00 In Report 123u456n00
    Checked profile value : ICX: Numeric Character and its set to 1,000.00 at site level.
    Do I need to set character set anywhere in OAF before calling concurrent program?
    I tried to use "alter session set nls_numeric_character = ',.';" by calling stored procedure from OAF. But still its not working.
    Please give me solution for this.
    Regards,
    Sadanand

    Hell - I am running into the same issue? Did you guys find a resolution for this? Please let me know, would really appreciate your help.
    Thanks,
    Dhiraj
    [email protected]

  • How to change number format to international setting

    Hello everyone,
    I need some help on how to change the number format on my phone from the standard US format to an international format with no spacing between the numbers. Currently, my numbers appear as: 0706 343 3456. However, I will like for it to appear as 07063433456. When i recieve calls, the number format is not recognised and I cannot tell who is calling. Same goes for SMS messages. In this part of the world, the number format is not spaced, which is quite frustriating.
    Can anyone please advice me on how to go about this.
    Thanks

    Really? I tried that but it did not work. I restarted the iphone several times but the number format did not change.

  • How to change number format in web reports

    Hi, Experts,
        Simple question, if I want to change the number format on web report as following
    . . . . . . . . Actual
    . . . . . . . . *1000SGD 
      new order   .   341.5
      sales       .   567.45
    if I click "Actual" then select properties, set data format from "in 1000" & "0" to "in 1" & "0.00", nothing changed in web report after refresh.
    if i click one number (for example: 341.5) or "New order" to set data format from "in 1000" & "0" to "in 1" & "0.00", only this row's format is changed, others row still keep old format.
    how to change whole column's data format at once setting?
    thanks in advance.
    Message was edited by: jie miao
    Message was edited by: jie miao

    Hi,
    Logout and login may help you and also Delete the session in SM04  before re login. Some times system will not do complete refresh of data even though you select refresh button.
    With rgds,
    Anil Kumar Sharma .P

  • How do I change the number formatting within a Cell Table in Microsoft Word?

    Hi, I was wondering if someone could help me out on an issue I've been having... I work for an accounting firm and we do a lot of financial statements. 
    I was wondering if we would be able to treat a cell table in Microsoft Word 2007 like I would a cell table in Microsoft Excel. Meaning, I would like to change the formatting of the numbers in the table to the "Accounting" (number) format so it
    aligns by the decimal point and use the $ signs and () for negative numbers.  We do use the link tables feature, however, most of our balancing pages just can't be done in Excel because of the way the text is written. It would be much harder to format
    the text if it were to be typed in Excel. We have also tried  creating an Excel sheet within Microsoft Word but it is the same as linking the tables... Again, a text formatting issue.  The only option is to use tables within Word but how do we change
    the number formatting to a "accounting" (number) format where the numbers would align with the decimal point and use () for the negative numbers. Is there ANY option for us to do this other than manually entering this information in using tabs?  
    If there are no options other than entering it in manually, please consider this as an option for your next software update. I believe that a LOT of people out there will be interested in this feature... My manager and I just attended a webinar on Microsoft
    Advanced Word Tips Tricks and Techniques and 75% of the attending people had this question but no answer.
    Thank you very much for your help!!!!!

    Word does not really have number formatting for table cells. You can align cell contents on the decimal point, though, by setting a so-called decimal tab stop.
    Option 1:
    - Select the cells for which you want to do this.
    - Display the ruler.
    - Click the Tab box on the left hand side of the ruler until the box contains an inverted T with a dot.
    - Click in the ruler where you want the decimal tab.
    Option 2:
    - Select the cells for which you want to do this.
    - Click the arrow in the lower right corner of the Paragraph group on the Home tab of the ribbon.
    - Click the Tabs... button in the lower left corner of the dialog.
    - Specify a tab position in the box, e.g. 1.5".
    - Select the 'Decimal' radio button under 'Alignment'.
    - Click Set.
    - Click OK.
    You will have to type the numbers as they should appear, including the $ for currency and the ( ) for negative numbers.
    Regards, Hans Vogelaar

  • Applying date and number format mask

    I have specified a date format for an attribute and a number format for another attribute of an entity object using Entity Object Editor - Control hints for the attributes.
    The date format is:
    Format type: Simple Date
    Format: dd.MM.yyyy
    The number format is:
    Format type: Currency
    Format: 0,000.00 km
    When using <c:out value="${bindings.MyDate}"></c:out> the format mask for the date is applied and it looks good, but when using
    <c:forEach var="Row" items="...">
    <c:out value="${Row.MyDate}"></c:out>
    </c:forEach>
    the format mask is not applied.
    When it comes to the number format it is not applied no matter what I use.
    I have tried setting the format for the view object attributes as well but the result is the same. How do I make this work?

    Can it have something to do with <html:form> ? Since it works using <c:out value="${bindings.MyDate}"></c:out> inside a html:form.

  • Has someone knowlege of how to use Custom Number Format in Numbers V3.0

    Hello Everyone,
    From Excel to Numbers '09 I worked with Custom Number Format.
    Making formats like 60 sec, km/h or m/s².
    In the new Version 3.0 it is not under 'Format'/Custom Number Format.
    I did not find it! Has someone found a way to do it the old way.
    I am working with the German version.
    Bye

    Limmy,
    There is no option in Numbers 3.0 for Custom Format. If that is mandatory for your purposes, it is still available in Version 2.3.
    Jerry

  • How to use FM format element in number format model

    Dear all,
    Could anybody explain what is FM format element for in number format model? I read the documentation, it doesn't show a clear description as it those in Datetime Format Model section.
    regards,
    Valerie

    It works mopre or less the same for numbers as for dates:
    SQL> -- generating some numbers:
    SQL> with t as (
      2  select level n
      3  from   dual
      4  connect by level <= 10
      5  )
      6  --
      7  -- actual query:
      8  --
      9  select n
    10  ,      '*'||to_char(n, '09')||'*' nofm
    11  ,      '*'||to_char(n, 'fm09')||'*' fm
    12  ,      length(to_char(n, '09')) lnofm
    13  ,      length(to_char(n, 'fm09')) lfm
    14  from   t;
             N NOFM            FM                   LNOFM        LFM
             1 * 01*           *01*                     3          2
             2 * 02*           *02*                     3          2
             3 * 03*           *03*                     3          2
             4 * 04*           *04*                     3          2
             5 * 05*           *05*                     3          2
             6 * 06*           *06*                     3          2
             7 * 07*           *07*                     3          2
             8 * 08*           *08*                     3          2
             9 * 09*           *09*                     3          2
            10 * 10*           *10*                     3          2
    10 rows selected.As you can see, the leading spaces are trimmed.

  • Stored Procedure for Batch Number Format and Block Duplicate Batch Number

    Hi Experts !
    I am new one in forum asking question.. I want Stored procedure for Batch Number Format. I want fix one Batch number format in Stored Procedure.
    Example :
    My Batch number format Like  BATCH00001 - It should be first five digit is text format and next five is Numeric.
    IF create Goods receipt PO or Goods receipt stage I create batch number like BATCH 00001 or any other number means don't add that document and also duplicated batch number also does not allowed. please give me the solutions. I am sorry for my bad english .

    Dear Nagarajan K.
                         Thanks for your replay ..
    IF @transaction_type IN ('A','U') AND (@object_type = '106' )
    BEGIN
    set @item = LEFT( @list_of_cols_val_tab_del, CHARINDEX(CHAR(9),  @list_of_cols_val_tab_del,1) - 1)
    set @batch = substring(@list_of_cols_val_tab_del, len(@item)+1, (CHARINDEX(CHAR(9),  @list_of_cols_val_tab_del,len(@item)+2)) - (len(@item)+1))
    --set @base =( select basetype from ibt1 where batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
    set @count = (select count(*) from oibt quantity > 0 and where  batchnum = ltrim(rtrim(replace(@batch,char(9),''))))
    if @count > 1
    begin
    set @error = 1
    set @error_message = 'Please enter different Batch Code for batch ''' + @batch + ''' for item ' + @item 
    select @error, @error_message
    END
    END
                  I used above Stored Procedure. here we can use one batch number for different item but  i want to block one batch we should use one item and one time only after than we never use that batch number for same item and another item.
             After that I want format for Batch, we should follow unique Batch number for all items.

  • UCCHECK error:  TRANSLATE... CODEPAGE/NUMBER FORMAT is not allowed

    Hi ,
    I am getting error " TRANSLATE... CODEPAGE/NUMBER FORMAT is not allowed" while doing UCCHECK activity.
    Existing code is
      DATA: BEGIN OF BIN_TAB OCCURS 500,  
            SATZ(1500)  TYPE C,
          END OF BIN_TAB.
       translate bin_tab from code page '1100'.
    I am getting this error for above statement.
    Class  CL_ABAP_CONV_IN_CE should be used but not sure about the syntax.
    Please suggest how to resolve it ?
    Thanks:
    Anugrah

    Please refer to below link:
    http://wiki.scn.sap.com/wiki/display/ABAP/CL_ABAP_CONV_IN_CE
    Thanks,
    Sunny

  • Excel import number formatting

    Hello,
    I'm trying to use sqldev 1.5.4 to import data from an excel spreadsheet, and running into a number formatting issue that I hope someone can help me with. One of the columns in the spreadsheet contains zip codes that I'm trying to import to a varchar2 column in my table, but when sqldev imports them it's trying to format them with a comma in the thousands place. So the zip code "94606" becomes "94,606" in the database. Is there some way to disable this? There doesn't seem to be any option for it in the import wizard.
    Thanks!
    Sean

    Thanks for the suggestion. The format of the zip code column is set to Special (Zip Code) and I have another column, Phone Number, which is doing the same thing despite being formatted as Special (Phone Number), so I don't think it's using that.

  • Number format issue - comma (1,5) instead of period (1.5) before decimals?

    I am using an input field of data type Number. In Norway we use a comma before decimals. I can't get this to work in VC. Have tried to set Number format with 'Local format' checked but this is not helping. (even if my portal is showing Norwegian texts as supposed by the language setting)
    If I uncheck this and go to Custom formatting I get to set my own format. NSTR(@OPERATORER_N, ".2") gives me two decimals but with a period as the decimal point. NSTR(@OPERATORER_N, ",2") does not work.
    I do not want thousands separator.
    Tips?
    Henning Strand

    Hi,
    Check the se Threads i think you definitly get the idea or solution.
    But every body ask about to get dot separatot instaed of Comma Separator since this can be get easyly with Language Portal Settings
    Thousands separator
    http://help.sap.com/saphelp_nw70/helpdata/en/38/2d9b732beb4c68bba2962602a7d6bd/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/26/64fb472a144a0dbaf88f5ec75d9270/content.htm
    http://oregonstate.edu/dept/computing/warehouse/PDF/8-reports.pdf
    Re: Supressing Currency & Thousands Separator
    Re: Special Number format Mask Visual Compser
    All the best
    Govindu

Maybe you are looking for