Number jump while post capture excise through J1IEX

Sir,
My client is facing a problem
when they capture excise for captical goods through J1IEX
the number is jumper over 50 number while saving
they want to avoid such insident and how to solve
plz give the solution is there is any possible to get back the nymbers again
raghram
Edited by: K. Raghuram on Jan 28, 2009 7:58 AM

Hi,
when if more than one users are doing the transaction system allocates a number range for every users, if anything like network disconnected at that time before poting it, then when u will again post that transaction system will take the next number that it has allocated before.
regards
jash

Similar Messages

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Unable to post the excise through J1IG w.r.t material doc....

Hi
Please need your inputs....
We are configuring the trading import scenario.
We created the material doc through MIGO and the user need not to capture in the exicse during the MIGO they need to capture the excise entries through J1IG.
But I am unable to capture excise through J1IG with reference to material doc
System will not capture all values.
I can able to capture the excise during the MIGO but I am unable to capture the excise with material doc through J1IG
Please give your valuable suggestion.
Edited by: K. Raghuram on Dec 6, 2011 7:47 AM

Thanks for your promt reply Nagarajan.
We are using serial no functionality for that perticular material.
While doing Goods issue wrt STO (351) we select serial nos for eg (10001 to 10105), qty-105.
While doing GR wrt PO i.e. STO (in Rec Plant) those serial nos are not reflected.
So we needed GR wrt Mat doc.
Regards,
Sachin Narvekar

System Calculating HCess twise while posting MM Invoice through MIRO

Dear Gurus,
System calcuating Highter Cess twise while posting MM invoice through MIRO.
Please guide where could be problem... Pls provide standard steps need to verfy one by one to analysis the same.
Regards,
Venkat

Dear Santosh,
We are using TAXINN-Condition based method. We are maintaing JSEP as HCESs condition and JHX1 as Off-setting conditiong type.
But system calcuating condition value against both in IV........
Regards,
Venkat

BTE while posting accounting document through MIRO

Hi All,
I am doing MIRO posting with PO,while MIRO posting accounting document is getting created for it. I need a BTE while posting accounting document through MIRO to trigger workflow(through event).
For direct accounting document posting I found the BTE 1030 to trigger workflow.
Thanks
Sree

Hello !
      The BTE required is "00001120     DOCUMENT POSTING: Field substitution header/items".
      Double click on this entry at FIBF transaction and you will find the function module SAMPLE_PROCESS_00001120
      Take a copy of this function module and go ahead.It is not possible to change the tables T_BKPF and T_BSEG. So, use the tables T_BKPFSUB and T_BSEGSUB.
Regards,
S.Suresh

Error While Posting Vendor Excise Number

Hello,
Wrong excise invoice number (X) was captured while doing MIGO
In the change mode we have changed the Excise Invoice Number to Y, while posting the Y excise number we are getting the Error 4F 113 ( All Part I entries have been canceled for excise invoice Y 2007)
Please suggest !
Regards,
Kumar

Hi,
Once you capture excise invoice in migo u r not supposed to change in J1iex.
if u made amistake cancel the document and the gr and freshly do

Issue in cancelling excise through J1IEX.

Dear All,
I have an issue regarding cancellation of excise invoice. Our user cancelled the excise invoice in the below mentioned procedure.
1. Cancelled material doc through MIGO not MBST.
2. Posted the vendor excise in J1IEX to reverse the excise.
Here the issue is when he posted the vendor excise in J1IEX for reversal of excise the user did not check the values he posted in J1IEX and when he tried to Cancel the excise invoice. ABAP RUN TIME error has occured. I have crosschecked the documents and found that Part 2 entries reversed are exactly double to the actual values to be reversed. When I checked at the table of Part 1 and Part2 entries Part 1 entries have been reversed twice for a single material document at the same time. I don't know how this has happened, as of my knowledge system cannot reverse part 1 entries twice for a single material document.As the Part 1 entries are doubled, the Part 2 entries are doubled and causing runtime while cancelling excise Invoice. Now my client wants this document to be posted correctly.
I Want to know how this has happened and I have to rectify this issue.
What should I do so that system can post the same values for reversal.
Kindly help me on this issue.
I am attaching Part 1 and Part 2 entries for 101 & 102 movt type documents related to this issue.
Regards,
Bhanu

Dear Manosij Basu,
I have attached J_1IGRXREF for both the documents.
We dont want to change the entries at table level as it might cause inconsistencies. Is there any other solution?.
Regards,
Bhanu

Part2 tab not coming after posting the part1 through J1IEX

Dear Experts,
when I post the part1 entry through J1IEX,
Part2 entry tab not shown when i display the document,
please advice me where the required config is missed,
thanks in advance
lakshmi reddy

Dear,
In your case, Check your input Tax code in Purchase Order . If its modavatable then when you tick at migo item ok Excise Tab must be displayed at header level. After posting when you see MIGO document, check at header level excise tab and see part2 entry.
More general look like you have inputed wrong tax code.
Regards,
Rajesh koladiya

Capture Excise Invoice J1IEX

Hi,
We post GR selecting the "NO EXCISE ENTRIES", later when we try to Capture the Excise invoice with reference to Goods receipt, system will allows to capture it, but while posting the same, it gives following error;
No Part I exists for availing credit in excise invoice 5000000298 2008
Message no. 4F112
Please suggest.
Thanks
Shp

Hai,
1.As u did the GR with no excise entries, u have to update the registers RG23A or RG23C part1 by Tcode J1I5. After doing this, capture Excise invoice wrt GR doc & post the excise invoice.
2.To update the registers by TCode J1I5 - Update of registers,
enter the following
Company, plant, Excise group, Material document, GR posting date, select the classification ROP - Receipt of material from outside under any other provision, Date & respective registers. & execute.

Problem while posting FI document through BAPI - Multiple Exchange Rates

I am able to post FI document with multiple exchange rates for the same currency using FB01. But, when I try to post the same document details using BAPI_ACC_DOCUMENT_POST , it throws an error F5 701 - Inconsistent Rate for Currency XXX .
How can we avoid this error while posting through BAPI ?
Thanks & Regards,
Nidhi

Hi Nidhi,
Value range
    The field CURR_TYPE (currency type) describes the role played by a
    currency in the SAP System.
    The currency type can take on the following values, for example:
    o   00      Transaction currency
    o   10      Company code currency
    o   20      Controlling area currency
    o   30      Group currency
    o   40      Hard currency
    o   50      Index-based currency
    o   60      Global company currency
    If an entry is not made in the field CURR_TYPE, the default value "00"
    is retained.
    If only one data record is transferred in transaction currency for each
    line item, the field CURR_TYPE does not need to be filled out. If
    several data records are transferred for each line item, the currency
    type must be entered for each record.
If the parameter CurrencyAmount is filled with the currency fields,
a complete document check including characteristics and value
components of profitability analysis (CO-PA). Otherwise, the account
assignment objects are checked.
Check the BAPI documentation SE37.
Regards,
Boobalan Suburaj

Error while posting Vendor Excise Invoice

Hi
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 18.16' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Kindly give the solution
Regards
Pratap

Hi all,
There is no excess amount in the transaction.
IN Po Excise value@8%: 1,815.88
Ecess@ 2% on EXcise:36.32
HecesL:1%: 18.16
This is how it is.
Before this i have posted one thread on Part I does Not Exist, based on this i was in the forum and i found in one thread to cancel the GR and cancel the Excise Invoice if Part II has not been posted.
When i have done this it has given me one message that Reverse the availed Cenvat Credit - basing on this i am trying to post Vendor Excise Invoice and then i have to cancel the Internal Invoice.
This is what i have done.
So kindly let me know where i am wrong.
Regards
Pratap

Error while posting partial retirement through ABAVN

Hi Friends,
I want to post complete retirement of 1 asset which in the same year of acquisiton.
While posting i am getting error msg no. AA671 - "you cannot combine deprec. to the day w/ year-dependent fisc.yr variant".
We are using year dependent fiscal year variant. the parameters in depreciation key are
Base method - 014
decl bal method - 001
prd control - 01(11/01/02/01)
Multi level method - A10.
Class - straight line depreciation
Kindly suggest the parameters in depn key to avoid the error as we donot want to change the fiscal year variant.
Thanks & Regards
Bhairavi

Hi Bhairavi,
if your depr. key have the setting: T090NA-XDAILY = x this is the reason for the error message.
Regards Bernhard

While capturing excise through j1iin

Error:Maintain number range for object J_IIRG23A2..........
Please suggest the path of spro where i have to maintain this number range or please suggest any t code for this,Uu solution is appreciated
thanks and regards
G.J.RAJU
Sap-sd senior consultant

Hi
The issue is solved. I had to maintain assignment of LF to F6 in SPRO, excise settings.
Logistics General-Tax on Goods Movement-India-Business Transactions-Outgoing Excise Invoice-Assign Billing Types to Delivery Types.
Thanks and Regards
Adithya

Scess value field is grey out in MIGO while posting rejection excise invoic

HI..
In Return delivery ,i am capturing & posting excise invoice...
The problem is while we can change the values of BED,AED,ECS but the SCESS field is coming grey out.Therefore i cannot change it.
How can we remove the grey out so that we can enter manually whatever amount we have credited.
here the print program is made considering in MIGO we can capture/post excise invoice..
plz reply fast.
Thanx & regards,
Satpal

When it is return delivery tranaction and if you don't select no excise entry system by default captures all data from original document except quantity field and hence all the fileds will be non modifiable. However it is better to select 'No Excise Entry" at the time of Return Delivery and then go for "create excise invoice for other movements" T Code "J1IS" so that you could enter all the duties correct based on the qty rejected in return delivery.
Hope it would suits you.
Cheers

Serial Number error while posting UD

Hi all,
I am getting an error message "Serial number xxxx not suitable for movement type". "Serial number xxxx cannot be used here" while making usage decision for an production material. The error is happening only for the particular GRN. The GRN was done for 251 quantity and the problem is with 97 serial numbers only, for the 154 quantity system did not show any error message.
First I tried to change the status and update stock details for the serial number thru' IQ02 but there also getting an error message business transaction not allowed.
Could not change serial no. profile in material master as the particular material has open production orders. Tried to cancel GRN for the material but system is giving the same error "Serial number xxxx not suitable for movement type". "Serial number xxxx cannot be used here". Tried to do posting using the t.code MI10 but there also getting the same error "Serial number xxxx not suitable for movement type". "Serial number xxxx cannot be used here".
I tried to replicate the error message in development and quality system but could not as system is working fine. The problem occurred only for the select set of serial numbers and not for all.
When I checked in SCN got an sap note 1229108 in which it is mentioned that the error could be because issuing SL is not mentioned in the order.
I would like to know whether we can apply sap note directly in production system or not.
Regards
V. Srinivasa Ranganath

Hi Shyam,
The "97" serial nos are assigned to the same material only. The problem is when the 251 serial numbers were entered at the time of posting GRN, system is updating the stock details only 154 serial numbers only. So when we try to posting in QA32 for 251 quantities system is giving an error "Serial number cannot be used here", "Serial number is not suitable for movement type". Tried to reverse GRN but system is giving same error message.
Tried changing the status and then update the stock details for 97 serial numbers, system did not allow to enter the stock details. Checked for SAP notes, but they are all already updated in the system. Kindly let me know if I am missing any step or doing something wrong.

Number jump while post capture excise through J1IEX

Similar Messages

Maybe you are looking for