Number keys on Mac keyboard with Windows in boot camp

I am using the full size wired keyboard with my iMac. While I am in WIndows XP Pro on Boot Camp, I can not use the number keys on the right side. Is there any way I can make these work? It might be picky, but is sure annoying the crap out of me. Any thoughts?

The Boot Camp forums are here:
http://discussions.apple.com/category.jspa?categoryID=237

Similar Messages

  • Magic Mouse with Windows 7 Boot Camp

    I get that this discussion has been posted here and on other forums throughout the web. I still don't get it. My Magic Mouse works when I use Mac, but when I use Boot Camp Windows 7 Professional 64-bit I can't get it to install. The number 2 step people keep saying is "right click" on the magic mouse. Do I right click the actual mouse or the magic mouse icon? Also, how do I right click if the Mac I have only has the pad? I'm new to Mac's and tried clicking the right side of the pad and nothing different happens.
    I'm really bad with computers so if someone can break it down as easy as possible I would much appreciate it.

    NotGood,
    Can you help those of us who are still struggling with this issue, by explaining what you did?
    Thanks,

  • Number keys on Mac Keyboard while using windows 7 in vm fusion

    I am trying to use my wired keyboard with the number keys while in windows 7 through vm fusion on my mac and the number keys don't work. Does anyone know how to get these to work? I can't use them for the calculator or for quicken but when I go back into the mac calculator, they work fine...any answers out there?

    YES!!!!! I usually have difficulty finding answers for issues I have in these forums. But this one helped!
    I just got done installing VMWare Fusion 3 and Windows XP Home on my computer, then later noticed that the number keys were not working. talmy0 is correct, the clear key above the 7 works as the Number Lock Key on Mircosoft keyboards. Thanks, this was helpful.

  • Problems with Aluminum Mac Keyboard with Windows 7

    I am able to yuse the key board with Windows 7 but not all the functionality is there. For instance I can not use the volume controls or the function keys or the number pad. When I check the drivers it shows the right keyboard. Any ideas?

    Because this seems like more of a Windows 7 issue and not an iMac issue I would recommend you repost to the appropriate forum. For example if you are using Boot Camp then go to that forum or if you are using Parallel's that forum etc.
    Regards,
    Roger

  • Stuck in the installation with windows using boot camp

    I gave windows 35GB on my HDD. When I came to the part in the installation to chose a place to install windows on, all the places that was showing gaved my the answer "you need to have NTFS". The problem was that none of them had it, not even the 35GB space that I made with boot camp for this.
    I chose to stop it all and started go back in the installation. But when I came to the choosing of languages I clicked on "x", then my computer started restarting itself. It is know I am stuck.
    I manage to get the installation disk out, so now my screen is black and all that is showing is "no bootable device -- insert boot disc and press any key"
    I dont know how to get back to ios.
    Please help me find a way to get back to iOS!

    You must read the Boot Camp directions before charging in, this is clearly covered on Page 7.
    Reboot: at the sound of the chime press and hold the option key. When the startup manager loads select OSX to boot from.
    IOS is for iPads, you want to get back to OSX

  • Using an external hdd with windows on boot camp

    Im looking into using boot camp, and was thinking about the option that you get for seeing files that you create in XP within mac OSX, well, wot would happen if i had an external hdd?
    ive got one connected thru firewire, and when i use "Get Info" it tells me the format is Mac OS Extended.
    Now, would that be recognised within XP, and would i be able to move/store files onto it, and then use them within OSX
    If it could, then it would save me having to use a large partition for XP, and the alternative format type.
    If anyone could help me out
    Cheers
    Jon

    Im looking into using boot camp, and was thinking
    about the option that you get for seeing files that
    you create in XP within mac OSX,
    well, wot would
    happen if i had an external hdd?
    You would need to ensure that both the Mac OS and Windows XP OS had read/write privileges.
    ive got one connected thru firewire, and when i use
    "Get Info" it tells me the format is Mac OS
    Extended.
    Now, would that be recognised within XP,
    No, not without third party software.
    and would i
    be able to move/store files onto it, and then use
    them within OSX
    You could is you used MacDrive which will allow you to read Mac formatted disks on a Windows PC.
    iFelix

  • Leopard with windows through boot camp

    I downloaded windows xp through boot camp today. The installation instructions say I also need to download leopard to the windows side. Do I really need to install mac ox s leopard to the windows side of my mac? And what does leopard do? Will I bee fine without downloading it?

    Need clarification.
    BootCamp makes a partition on the hard drive which can then accomodate a Windows installation. You have to have a genuine retail XP installation disk in order to install after using BootCamp to make the partition. The Leopard disk has the Apple drivers necessary for Windows to function on Apple hardware properly and is installed when booted from Windows.
    Please read throught these links to see if you missed something.
    http://support.apple.com/kb/HT3777
    http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup.pdf
    http://support.apple.com/kb/HT1899

  • Why can't I start Mac after installing Windows using boot camp???

    I'm new to Mac.... Have installed Windows 7 through Bootcamp... Well, I tried to at least!!  I can now only get into Windows every time I start the mac up.... What have I done wrong - and how do I fix it!?!

    Flying kiwis wrote:
    Thanks Vinmar.... I can't see anything down on the bottom fit of my screen, apart from the time, date, connectivity, speaker volume etc. am I looking in the wrong place??
    The restart in Mac OS X icon (a grey diamond) will only appear after you've installed the Boot Camp drivers. If you installed the drivers, try clicking on the sideways triangle to show any hidden system tray icons.  You can also use the boot camp control panel to restart in Mac OS X.
    For how many partitions you have, you should be able to see those in the Disk Utility application in Mac OS X or the Disk Management app in Windows.  Be careful not to delete any of them.  If you want to remove a partition, I'd use the Boot Camp Utility to do that.  Nore as well that OS X 10.7 and above add a hidden recovery partition to your drive that you won't see in Disk Utility but will see in the Windows app. 
    Hope this helps.
    Cheers,
    Vinmar

  • Mac Pro with XP in boot camp - wireless speed fluctuates

    I'm running XP on my Mac Pro, i installed all the latest drivers (from the leopard DVD and also from windows update) but i'm noticing very heavy fluctuations regarding my wireless network speed.
    When i look at "Wireless Network Connection Status", the connection/strength is always very good, but the speed fluctuates from anything between 54Mbps to just 1Mbps.
    I've searched the forum and i've found some people with similar, but not the same problem, and their solutions (mainly windows patches) did not work for me.
    Just to be clear, under Leopard the wireless connection works just fine, and on my work laptop (hp, XP Pro) it works as expected. So it doesnt seem to be a router problem to me.

    Thank you for the link but it wasn't helpful as it only really said compatibility.  What did finally resolve the issue was going directly to AMD and finding that they updated the BootCamp specific drivers.  For other that stumble upon this, you cannot use the normal drivers from AMD but you must search for the bootcamp specific drivers (which also includes an updated Catalyst utility and a couple extra things not included in Apples release of the drivers).

  • Magic Trackpad issue with Windows 7 Boot Camp

    Hi, I just cannot get the the magic trackpad to work with bootcamp in indows 7.
    1) is it compatible?
    2) I have already updated bootcamp to the latest version, installed driver software. It detected the trackpad once and worked but than on reboot just does not work, and also now cannot detect it. Works fine in Mac OSX. Any help is appreciated.

    I came across this problem today after buying a Magic Trackpad to replace my dying macbook laptop pad - all of the symptoms above. First I added a USB mac mouse, which at least gave me some control! Then I got a lucky break when the laptop discovered the Trackpad (it did it 1/4 times roughly), I quickly double clicked the icon for the 'wireless mouse' it thought the device was. This kicked off Windows 7 retrieving a driver from the web for the actual device (Magic Trackpad), just the same as the process for adding a Mac USB mouse to the Windows environment. I now have it working fine - although it seems I still have the same problem that inspired me to buy the new pad (left click in Minecraft just keeps going on its own, sometimes stoppable with a second click but destructive in the meantime ;-). May be a Minecraft problem, everything else works fine. Now I have a mouse, a half working pad on the laptop, and a working Magic Trackpad. Recipe for some hardware confusion.

  • Running Office for Mac while in Windows through Boot Camp

    Hi,
    I have a macbook but am trying to run a windows program for school that also requires the use of excel. I have office for mac installed but when I go to the windows os to get the program to work my excel isn't there so it will not work. Do I need to buy VMware fusion or is there another way to solve this problem?
    Thanks so much

    Try using VirtualBox.
    (42693)

  • Does Apple USB modem (or any USB modem) work with Telix under Boot Camp?

    I know, it's one heck of an obscure and specific question. But it just so happens to be critical to whether I try and use an Intel Mac (new, with Leopard, under Boot Camp) as a PC (where a PC would be a lot easier as far as having a built-in 56k modem goes). By Telix I mean the most "recent" version of Telix for Windows. Thanks in advance for the assistance.

    It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
    Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
    [ Edited by Apple Discussions Moderator ]

  • Using Apple keyboard with Windows (bootcamp)

    Does anyone have a cheat sheet for using a wired Apple keyboard with Windows 7 (the bootcamp setup)? I like to use keyboard shortcuts, both in OS X and in Windows. When I switch to my Windows partition, I haven't figured out the key combinations to use on the Apple keyboard.
    UPDATE: Never mind. I found it here: http://support.apple.com/kb/HT5636?viewlocale=en_US
    Message was edited by: Caesar1948

    The OPTION or ALT key.

  • I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

    ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
    Mylenium

  • Using MAC Keyboard with Vista

    I am using a dual OS, Mac & Vista. The Mac USB keyboard works occasionally with Vista. It may work for a few minutes then stop completely. I loaded the Bootcamp drivers with Vista as instructed. Is there and updated driver that will allow me to use the Mac Keyboard with Vista? Vista has no answers.

    Just to update anyone interested, I installed Vista and MCE separately without using BootCamp. Just like a regular PC. I did not know it was possible I found it by accidentally. After which I installed the drivers and am currently using the Mini as an HTPC. I don't have osx installed on it. everything works perfectly. no problems at all. I think BootCamp creates more problems.
    Message was edited by: edwin007

Maybe you are looking for

  • Where's my metadata in a video?  Lightroom adjustments not transferred to CS6?

    I've shot some video clips with DSLRs, and imported into Lightroom4 along with my stills, with normal Import metadata applied.  All looks good in LR.  Videos are generated as .MOV files. If I open a video in Photoshop CS6, and look at File Info, ther

  • Oracle Apps Forms are not Opening in Windows 8

    Hi, I'm trying to access Oracle Apps in Windows 8 Environment. When I try to open any EBS form, every time it ask me to install J2SE Plugin version 1.6.0_07, Below is the error message In order to access this application, you must install the J2SE Pl

  • Sales view in the material masterq

    Hi All, Is there any posibilities to keep a check in the material master creations (Sales View) " If plant data storage view does not exist for a material" system will not allow to extend a sales view in the same plant. Thanks in advance Samir Bhatt

  • How to convert labview program to .exe file?

    Is it possible to convert VI file into .exe file? How to go about doing it?

  • DNG converter just started changing dates wildly-by 10 years!

    Hey all, Been using DNG converter for awhile now with zero problems.  The past couple weeks whenever I process some files up to my server at work, it will change the date from today's date (i.e. 2/24/14) to some date in 2002. I've tried rebooting the