Number not appearing when calling landlines

I have a subscription for an American number with months to go, but when I call a landline in the US the number is not appearing on the caller ID like before.
This is an error that needs to be fixed.  

MatthewLieblong wrote:
Agreed.  This is ridiculous that you pay for a US local number, which works, but you cannot use it as your caller ID number.  That was half of the point of getting the online number, I never would have imagined it didn't show up as your caller ID.  So basically I can never get anyone to answer when I call because it looks like some crazy California area code and/or hidden/private/telemarketer phone number in the caller id of whomever I am calling.
THIS NEEDS TO BE FIXED.  It should be default set to use your online number as your caller ID, and you could change it to a mobile number or otherwise if you wanted to afterwards.   Can someone from Skype fix this, or at least explain why?  If they don't, I will be searching for other web phone solutions when my subscriptions expire.
Skype does not automatically use an Online Number for Caller ID, since that is a privacy question best left to Skype users.  First of all, not all Online Numbers are usable as Caller ID.  Next, some users may have multiple Online Numbers that are eligible for use as Caller ID.  In that case, which number should Skype select? 
If you want to access the Caller ID settings, one way to do that is to log into your Skype account here on the Skype web site.  Use the "Account" link at the top of this page, and you will see the current Caller ID settings.  From there, you can change it.  US Online Numbers can be selected as Caller ID, as can Online Numbers from a few other countries (the UK is one of those other countries).  Online Numbers from certain countries (Australia and Mexico are two of those) can't be used as Caller ID when calling telephones from Skype. 
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Similar Messages

  • Contacts' name not appearing when called locally while travelling !!!

    iPhone 3G 3.0
    When called locally abroad during travel the contact name does not appear. I have stored all my numbers in Int'l format.
    Is there a fix / tool to sort out this issue?

    I used to experience this. What I do now is store multiple versions of the same number, with and without the country codes. Mostly I use the country code version to dial out, while the phone uses the non-country code version to ID in-coming calls.
    For example, Contact "Buddy #238" may have two phone numbers, even though he really has just the one:
    78 (555) 123-1234, and
    (555) 123-1234
    I'd use the first to call out, but the in-coming calls may tend to show up as the second. Coming to think of it, which of the two number formats does your caller ID display when your friends call? Does any of this seem applicable at all? If you notice a different format for in-coming calls, just add that number to the existing contact(s).

  • Baseline date mesg not appear when call transaction FB60 in custom tcode

    Hi Experts,
    One of the custom tcode which calls the standard tcode FB60.
    If we give the last month date in payment date, it should shows the 'Due date is in the past' message and if we give next year as payment date i.e, more than 365 days, then show 'Baseline date foe pmnt is 700 days after the document date : check'.. These messages are coming when we call the standard tcode FB60 directly.
    But if call it in the custom tcode, these messages are not appear.
    Thanks,
    Mani.

    Hi Experts,
    One of the custom tcode which calls the standard tcode FB60.
    If we give the last month date in payment date, it should shows the 'Due date is in the past' message and if we give next year as payment date i.e, more than 365 days, then show 'Baseline date foe pmnt is 700 days after the document date : check'.. These messages are coming when we call the standard tcode FB60 directly.
    But if call it in the custom tcode, these messages are not appear.
    Thanks,
    Mani.

  • I found an iphone 4s blocked on icloud imei is ***** then i called the supposed owner at the number that appeares when you activate the device ************ but he told me that he never had an iphone ...can you help me to activate the devi

    i found an iphone 4s blocked on icloud imei is ********** then i called the supposed owner at the number that appeares when you activate the device *********** but he told me that he never had an iphone ...can you help me to activate the device??
    <Personal Information Edited by Host>

    ibrahimfromel rahme wrote:
    i found an iphone 4s blocked on icloud imei is ********** then i called the supposed owner at the number that appeares when you activate the device *********** but he told me that he never had an iphone ...can you help me to activate the device??
    <Personal Information Edited by Host>
    This is my 'doubtful' face:

  • 1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

    Hi. please solve my problem.
    .call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
    thank you in advance.

    Hi Ersin,
    Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform.  However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module.  I can think of no reason why the different calling method would be a factor.
    When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
    Regards,
    Nick

  • Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

    I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

    Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first  year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
    Good luck.

  • Some CGM graphics do not appear when FrameMaker files are converted to PDF

    CGM files are exported from ISO (Arbortext Isodraw 7.0 CadProcess) files. Then they are imported into Adobe FrameMaker 7.2, where all elements of the illustration are visible and can be printed. The FrameMaker FM file is converted to a PDF file using the Adobe PDF converter function of Frame. When the PDF file is opened by Adobe Acrobat 8,0 Professional, some, but not all of the illustrations in the file exhibit this problem (The callouts and other text may appear, but the lines, curves, etc. do not). The illustration prints the same way it appears on the screen. When exporting the ISO file as a CGM, the following selections are made.
    When importing file into Frame, "Import by Reference" is selected.
    When creating PDF in Frame, the following selections are made.
    Any Suggestions would be greatly appreciated. Thanks very much.

    Thanks, Michael.
    I will give it a try.
    Avox Systems Web Site: http://www.avoxsys.com
    AVOX SYSTEMS
    AIRCRAFT SYSTEMS
    Rick Barusic
    Senior Technical Writer
    225 Erie Street - Lancaster, NY 14086 - USA
    Tel: 716-686-1706
    [email protected]
    http://www.zodiacaerospace.com
    The information transmitted is intended only for the person or entity to
    which it is addressed and may contain confidential and/or privileged
    material. Any review, retransmission, dissemination, or other use of or
    taking any action in reliance upon this information by persons or entities
    other than the intended recipient is prohibited. If you received this in
    error, please contact the sender and delete the material from any
    computer.
    From:   MichaelKazlow <[email protected]>
    To:     rick barusic <[email protected]>
    Date:   11/24/2010 10:32 PM
    Subject:        Some CGM graphics do not appear when
    FrameMakerfiles are converted to PDF
    First you should update to the latest version of Acrobat 8, since you say
    you are running Acrobat 8, you should update to 8.2.5. Update your
    FrameMaker to 7.2p158. Those two steps might do the trick. If that fails
    try using a different settings file. Perhaps High Quality or Press
    Quality. I would never use Standard for anything where fidelity is
    important.

  • When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect.

    When I plug in iPhone (5.1.1) to computer, playlists show up on the iPhone (when plugged in), that do not appear when it is not plugged in. And I can't erase them. I have iTunes match, and deleted all my music on the iPhone, but that had no effect on the phantom playlist that shows up on the PC when I plug in the iPhone to the PC. I cannot manually move songs or playlists from the PC to the iPhone
    Help greatly appreciated.

    Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

    Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
    == today

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • My Songs in my Ipod Touch 4 is not appearing when I tried to Play it but when i insert to my PC and use Itunes, songs,playlist appears in I tunes.What do I need to do?Can someone help me?Many thanks

    My Songs in my Ipod Touch 4 is not appearing when I tried to Play it but when i insert to my PC and use Itunes, songs,playlist appears in I tunes.What do I need to do?Can someone help me?Many thanks

    Try:
    - Another cable
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How do I know if private browsing is working? The purple mask does not appear when I click the mask icon. In my privacy settings "Never Remember" is selected.

    I'm trying to confirm private browsing is working. Right now I have no way of knowing if it is on or not. The purple mask ,referred to in help, does not appear when selected. I should say in my privacy settings, I have selected "Never Remember" for history.

    Do you mean you have checked the box: "Always use private browsing mode"? If so, it's intentional that the private browsing icon isn't displayed as we didn't want Firefox to be showing everyone within view that you're using private browsing mode IIRC.
    There are some easy things you can do to confirm that you are in private browsing mode such as visiting a new website and then confirming it doesn't appear in the history window.

  • For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    Hi Spam_Valley,
    I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
    We may need to repair this. See the following resources for information:
    iTunes 10 for Windows: If song titles don’t appear correctly
    http://support.apple.com/kb/PH1468
    Fixing Incorrect Song or Album Listings in iTunes
    http://support.apple.com/kb/TA24677
    Thanks,
    Matt M.

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

Maybe you are looking for