Number of Application in 1 Appset in Sap BOPC 7.5 MS version

Hi guru,
i'm working with sap bopc 7.5 ms
does anyone knows how many Applications we can create in 1 Appset?
Is there a limit?
thanks in advance
A

Hello Antonello,
in the BPC 7.5 documentation is not indicated any limits for the numbers of cube present in an appset.
The only thing you must pay attention is the number of dimension in a cube, the number of the parenth you create for a dimension, and to optimize and compress the cube regularly for a better performance.
Best regards
Roberto

Similar Messages

  • Max Number of Applications in a Appset

    Hi,
    What is the maximum number of applications we can have in a Appset.
    Also What is the optimal number of applications we can have.
    Thanks in Advance,
    Regards,
    G.Vijaya Kumar

    Hi Vijaya,
    Actually, there is no limit of having multiple applications in an appset, neither there is any optimal value for that. It all depends on the size of your database. More the number of applications, you have, more the space required by your database. So, till the time your database is able to support that, its fine.
    May be some experts can go deeper into this.
    Hope this helps.

  • Maximum number of applications per application set

    Hello,
    I know maximum number of dimensions per application is 20 in OutlookSoft 4.2.
    What about maximum number of applications per application set?
    Regards,
    Hiroshi Yaji

    Hiroshi - I have not encountered a technical limit on the number of applications in an appset.  As a practical reality, performance and system administration will dictate how many apps an appset may contain. 
    On a related note, you could theoretically have more than 20 dimensions in an app.  However, I have only worked with one client who asked (needed?) an app with more than 12 dimensions.  In that case, usability was an issue due to the complexity in submitting data to an app with that many dimensions.
    Hope that helps,
    Jeff

  • Is there any way to limit the number of RFC calls from xMII to SAP R/3

    Hi All!
    I wanted to know whether the number of simultaneous RFC connections made from xMII to SAP R/3 system can be controlled in any way. Suppose we have a scenario wherein some million Sales Orders or Production Orders are to be updated in SAP R/3 from xMII in a short span of time. For all these updations to take place, multiple RFC calls will be established from xMII to SAP at the same time. This will increase the load on the SAP R/3 system and affect performance of the SAP R/3 system. Is there any check on xMII side to limit the number of RFC calls that can be made to SAP R/3 system?
    Regards
    Anupam

    Anupam,
    If you are using 11.5 just keep in mind that the JCO connection points to a single application server (based upon the SAP Server alias connection settings), but the traffic itself to make a BAPI request is effectively the same as any client user traffic.  There will obviously be limitations on performance and throughput, with network and server constraints added to the number and size of the R/3 requests, but there is no magic formula to plug-in because of all of these variables.
    If you are using 12.0 (or plan to migrate when it goes GA) then taking advantage of the JRA (java resource adapter) and the associated application server pooling that it offers on the NetWeaver side of things will greatly help you in the throughput capacity.
    If you have put some of your xMII application into either test or productive use and are running into issues then I would highly recommend entering the specifics into the customer / partner support portal so that they can help you through any associated problems.
    Regards,
    Jeremy Good

  • Limitation on the number of applications for a domain?

    Does anyone know if there is a limitation on the number of applications you can
    deploy on a domain for weblogic server 7?

    java -XX:MaxPermSize=... worked, so now the app server starts fine
    Thanks a lot.
    Rob Woollen <[email protected]> wrote:
    Jing wrote:
    Rob,
    I deployed 291 EJBs into the applications directory for a weblogicdomain, since
    each jars stands on its own, so weblogic treats them as individualapplications.
    Interesting. Is that really how you want to structure your server?
    The behaviour I ran into was weblogic server was not able to startcorrectly,
    it seems to stuck on some infinite loop, keep printing out the samemessage saying
    it's trying to active xxx.jar, but as soon as I reduce the number ofEJBs to a
    certain number(238) in this directory, weblogic server started correctly,deployed
    xxx.jar just fine.Without more information (like showing me what error it printed out),
    I
    can't tell you where the problem lies.
    However, the server is limited by the heap size, and the class size
    space is another limit you might hit.
    I would suggest increasing the heap size as well as the MaxPermSize in
    your JVM.
    -- Rob
    Is there any configuration I need to set on the domain?
    Thanks
    Rob Woollen <[email protected]> wrote:
    No limit.
    -- Rob
    Jing wrote:
    Does anyone know if there is a limitation on the number of applicationsyou can
    deploy on a domain for weblogic server 7?

  • How can we find the Idoc number which posts the material document in SAP

    Hi All,
    How can we find the Idoc number which posts the material document in SAP. We could not able to find the IDOC number from the material document which was posted by Idoc.
    Thanks
    Chandru

    Hi,
    In MIGO you can go to service of object(Just above show overview) and check 5th option workflow you will find the idoc number.
    regards
    suresh

  • Deletion of AppSet in SAp BPC 7 NW

    Hi all,
    I have a problem with deletion an AppSet in SAP BPC 7.0. When I launch
    the operation from BPC Client I get this message error during processing:
    Failed to connect to ABAP Server
    Time limit Exceeded
    In NW System I modified the abap/buffersize parameter to 7200 seconds
    (2 Hours) but the problem still persist.
    Please, Help me!
    Regards,
    Alessandro

    Hi,
    reading the logs, I found this error:
    Method OSoft.Services.Webservice.FileAccessService.FileAccessService.ReleaseAllLockOfUser not found
    Regards,
    Alessandro

  • How to find out the Idoc number triggered for any material transfer frm SAP

    Hi Folks,
    Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
    Do we have any navigation for that in MM03?
    Thanks,
    SPMD.

    Hi Shabbirmdpasha,
    If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
    Also would suggest to post the same in abap forums for more answers:
    ABAP Development
    Regards,
    ---Satish

  • Error in MSS requisition 'No personnel number is assigned to your user in SAP E-recruiting '

    Hi ,
    We are getting error in MSS requisition in E recruiting system that 'No personnel number is assigned to your user in SAP E-recruiting '
    while clicking on next button in the requisition form.We have assigned all specified roles for the E-rec related things with authorisation for 'P' and all
    other objects.Please comment on this if anybody faced the same issue

    Hi, just want to add to this issue might be useful for somebody else.
    We had the same issue, it turns out that the person who is raising the requisition has 2 Business partners in the system. We set one business partner to be "not released" and in addition to that we added the NA relation as this is missing with the CP
    MfG.

  • I recently re-installed my snowleopard OS 10.6 Since the re-installation a number of applications are now saying that this versions of "iPhoto" requires mac os 10.7.5 and i am running 10.6.8

    I recently re-installed my snowleopard OS 10.6 Since the re-installation a number of applications are now saying that this versions of "iPhoto" requires mac os 10.7.5 and i am running 10.6. Prior to my re-install of 10.6 i confirmed that i was using 10.6.8. Since i have never run 10.7 on this computer i am baffled as to why these applications are now demanding is after a re-install.
    any advice would be appreciated.

    Using my Grey Install CD i ran the optional install of just the application package, however the applications still respond in the same way. "You can't use this version of the application _______ with this version of Mac OS X"
    What is still baffaling me here is that i haven't ever upgraded these apps in the app store above Mac OS X 10.6.8. My reinstallation of the operating system was done via the original Snow Leapard Install CD. Prior to the reinstallation i was running 10.6.8 with all applications working.
    My issue here is this computer is within an education computer lab so simply going out and buying Lion may not be an option.
    Additional information that may shed light:
    Identical computer running within the same computer lab is using successfully:
         Mac OS X
         10.6.8
         Iphoto '11
         Version 9.2.3
    Reason for operating system Re-installation:
    -CrashReporter showed that the Dock continually crashed eating up a large % of CPU making the computer virtually unusable.

  • "Maximum number of application files exceeded or file names too long"...help!!!

    Hi there…
    I am trying to create a game for my mobile.
    The “problem” is that I have more than 500 swfs that I want to pack using the Adobe Mobile Packager. And I am getting this error:
    “Maximum number of application files exceeded or file names too long”
    How could I solve this problem?
    Thanks everyone!
    Cheers.
    Leo.

    500??  What are there so many files?
    The problem is that the CAB format only allows for 300 files maximum, so there's nothing that we can do about that I'm afraid.
    Mark
    www.flashmobileblog.com

  • Maximum number of applications in a workspace

    Hello All,
    What is th maximum number of applications that can exist in a workspace . Is this documented ?
    Thanks,
    Dippy

    What is th maximum number of applications that can exist in a workspace . Is this documented ?I'm not aware of any such limit (although I don't do a lot of workspace administration). An arbitrary limit on the number of applications in a workspace would be a useless way to manage resources.
    It would be a better idea to describe the nature of any specific problem you are having, rather than asking hypothetical questions.

  • Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI

    Hello All,
    We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
    Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
    Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
    These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
    8115001012
    8115001057
    8115001058
    8115001079
    8115001081 with OK status
    8115001180
    8115001181
    8115001690
    Please let us know how to correct the problem so we could do PGI for this Order?
    This scenario is not replicable in RST(Quality System)
    Our Findings:
    ** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
    2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
    Your help is highly obliged......This is very urgent..........
    Regards,
    Anirban
    SD Consultant

    Hi,
    I have encountered same issue today and here is the solution:
    1. Manually changed the status from EDEL/ESTO to ECUS
        Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
    2. Once status is in ECUS, change the serial number status back to ESTO.
        Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
    After doing the 2 steps above, you should be able to do PGI using the serial number.
    Kindly advise if it works for you.
    Regards,
    Vhanie

  • Masking Page number in Application web link

    Hi,
    Is there any way to mask page numbe(s) in Apex Application web link.
    For example, http://<server name>/pls/apex/f?p=111 is the web address to access my Apex application and it defaults to home page, if I run this application. After that, if I navigate to any other page(example page number 200) within the application, Page number will appends to the above web-link as below
    http://<server name>/pls/apex/f?p=111:*200*:3080776628071182::NO
    Is there any way, can we mask page number/application number in application web-link.
    Appreciate your help.
    Thanks,Manik

    Hi Manik,
    The only way that I know to mask a page is to use a page alias. For example page 200 is page aliased as HOME.
    So where ever you would call pagee 200 from a application liunk you would use HOME instead of 200. I am not sure how to mask the application number. I would have to test that out.
    Cheers Mike

  • How to find message type by using message number and application area

    Hi abapers,
    I know the message number and application area , how to find messagwe type.
    i.e weather it is error message or warning message.
    MESSAGE NUMBER IS    :219.
    APLLICATION AREA IS    : FS.
    in which table i had to check.
    i checked in t100 table , but i am unable  to find message type.
    please help me to solve this.
    regards

    hi,
    go to se91
    enter area and message number.
    then click on display.
    then go to utilities tab >> where used list or press shift + ctrl +f3
    there list of program will show .
    choose your program name
    then u will get ur mesage infoemation by double click on ur program name
    thanks
    sachin

Maybe you are looking for

  • Import process takes a lot of time to connect to schemas in the RPD

    Hi Gurus, I am facing this problem where when I start to import tables from my database into the rpd, it takes hours to load/display the schemas. Once I select tables, the import process takes another hour. Does this look like a setting issue on OBIE

  • How do I create a multi-coloured super-sized chessboard?

    Basically, I want to create a 72 by 72 chessboard. Instead of 2 colours, it will be 6 colours. And instead of it being in a repeating pattern, the colours need to be arranged in a specific order - I have the code for this in Excel, but can easily con

  • Movie will sync to 32gb touch and not to 8gb touch

    I have converted several movies to play on my 32gb touch. Recently I purchased 2 additional 8 gb units for my children and have found that some movies will not sync to their 8 gb iPods. Does anybody know the reason for this? I have looked at the spec

  • Auth_check --- FM

    How to find the autho object for the particular field? for eg: p0002-begda. for the particular user i want to restrict the download for single field, How I can differentiate between the 2 users. wt's use of CALL 'AUTH_CHECK

  • Error #3259, Has anyone had this problem when downloading ios5?

    IOS5 completes its download then starts processing the file, then this error pops out! #3259 and asks to check network connectivity, which is not the problem! Please help me fix this issue! ive downloaded ios5 about 6 times now, and everytime the sam