Number of copies printed upon P.O. change

How/where do I configure whether changes to a P.O. (ME22N) will be printed to a remote location's laser printer, as they are upon P.O. creation (ME21N).
In this case, the remote location wants a printed copy upon a P.O. creation but NOT when an existing P.O. is changed.
I see how to adjust the number of copies via MN05 but not how to turn printing off for just changes.
Thanks!

Hi,
In config, have you tried to un-check all fields relevant for printout of changes ? If this does not work, you could write a custom requirement which will check for PO change and suppress the output.
Cheers !

Similar Messages

Printer Dialog Box with No. of copies & Print Range.

I am trying to print a report(oracle) from a form (using a custom PRINT button) and wanted the printer dialog box to appear, for which I used the "WIN_API_DIALOG.SELECT_PRINTER(prtname, port, true)" API in the "When button pressed trigger".
But this API only takes care of a printer change, my issue here is how do I capture the changes pertaining to Orientation, Number of Copies, Print range etc. I know there is the "Properties - Advanced" option in the printer dialog box but changing values there doesn't help, as I had already mentioned the API passes only printer name.
So, if any one has faced a similar issue and has a solution,
PLEASE RESPOND IMMEDIATELY !!!
Thanks

Unfortunatley there is no way to give Forms that information. The printer dialog in D2kwutil is only designed to get the printer name / port, none of the other information. Even it it could Forms does not expose an API to effect the PRINT; built-in.

Number of copies different

Hello
I would like to know if you can somehow set the number of copies printed per customers
Ex
Customer A : 1 copie Delivery
Customer B : 2 copies Delivery

Hello
I would like to know if you can somehow set the number of copies printed per customers
Ex
Customer A : 1 copie Delivery
Customer B : 2 copies Delivery

Printer changes number of copies

hp officejet J4680 - printer wants to change the number of copies I request - I only want one and it changes that instruction to 6 or 8 or 7 - whatever it feels like - anyone had this problem?

Typically, for the number of Copies, you can set it to what you want as default by going to Copy>Settings>Set and New defaults.
If you want to reset this setting, you can go to Setup>Tools>Restore Factory Defaults.
Hope this helps.
I work for HP.

When I use the printer icon in Firefox, it is preset to 10 copies. How can I change this to only one copy by default. Thanks for any information

When I use the printer icon, in the upper left corner, it is automatically preset to 10 copies. I only want one copy by default. I can change it to one, but when re-opened, it is back to 10.

Number of copies to be printed isn't a setting that Firefox is supposed to be saving, and I have never seen a preference for that in the hidden Firefox prefs panel - about:config.
Try the '''''reset''''' described here and reset all the prefs for that printer: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure to restart Firefox before seeing if doing this '''reset''' fixed your problem.
If that did fix your problem, please click the '''Solved It''' button next to the answer that answered or solved your Firefox support issue, '''''it appears when you are logged in''''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.
If that didn't solve your problem and it still defaults to printing 10 copies of everything thru Firefox, please open '''Help > Troubleshooting Information...''' and use the '''Copy All to Clipboard''' button and then paste that information into the '''''Post a Reply''''' box here.
It is going to be a real long list, but all I really need to see is the ''' print.''' preferences, so you could paste '''All''' that information into a text program like WordPad first, edit out the information that I don't need to see, and then '''copy''' the remaining information and '''paste''' only that information in to the '''''Reply''''' box here.
I wonder if there might be a pref that I have never seen, but I truly doubt it. That "number of copies to be printed" has never been "stuck" for me on any program in Windows, on any PC I have ever used, with any printer / print drivers.
The only time I have ever seen a "print dialog box" default to more than 1 copy was with a work application where the program being used was set to force 2 copies of some specific forms to print 2 copies all the time - one to be given to the "customer" at the end of the job for their records of the service call and one for the "employee" to get a signature upon completion of the job, to fax into the home office for job documentation as completed successfully and for payroll purposes so they would get paid for that service call.

Acrobat 9 Pro - Print Number of Copies

At times I want to print to paper 2, 3, or 4 copies of the same document. With the printer window opened, it allows me to select the quantity, but when I click OK to proceed to print I received another popup window reading:
The printer cannot support this many copies.
Number of copies will be set to printer maximum of 1.
What/Where/How do I find the setting to resolve this issue?
VAIO NOTEBOOK
MS WIN VISTA HOME PREMIUM SP2
MS OFFICE 2007 SP2
ADOBE ACROBAT 9 PRO (9.1.1)
BROTHER MFC 9800
Adobe Tech Support REFUSES to provide any support for my 1-month old AUTHENTIC, activated and registered product !!!

Bill... do not misunderstand my words as your views are not my intentions. Take into account, there is a difference between asking the OP, "Have you checked the Print Drivers", and or, "If so, what did you learn?"; rather than telling the OP what the issue is before all facts are gathered, then becoming defensive or insulted.
Example:
I am cooking. I taste the food and say, "Something doesn't taste right. You say, "You didn't add salt". I respond, "I did, it's not salt, it must be something else". Instead of asking first if I added salt, or offering another suggestion, you are insulted and or become defensive. Case in point.
I hope this cleared up your unjustified comment.
Back on subject:
I posted the screen-shot on the fly and first time using this forum and its UI. When it is clicked on, it expands (as you saw). After it expands. Change the "Zoom Level" on your screen to find the correct resolution. Hint - It tells no more than the words in my original post.
Thanks for your help. I'm going to sleep before the sun comes up. Have a happy Sunday.

Set number of copies to print

Hello,
We're using Adobe Lifecycle Designer 8.0 and we've the requirement to print copies of our generated pdf delivery form.
Does anyone know how to set the number of copies dynamically at runtime ? Maybe by using java script ?
Thanks in advance !

Yes, I know OPK8 is used to set number of copies for CO04. We set it to 1 as I mentioned. That is what is needed when the user executes CO04 directly. My question was is there a way to dynamically change the number of copies when running CO04 via creating a BDC (or call transaction) from a custom process, because then we will need more than one copy.
I am resigned to calling CO04 in a loop for the number of copies I need.

Change number of copies in smartforms

I am trying to change the number of copies in my smartform. In the print program I am setting the number of copies in OUTPUT_OPTIONS-tdcopies. When the pop-up comes up, the user changes the number of copies, but that number is not updated in OUTPUT_OPTIONS. I am doing things inside of the smartform based on the number of copies so I need the updated amount. Any help is greatly appreciated.

hi,
The number of copies of an output is populated in the field NAST-ANZAL. The masterdata for the number of copies is maintained in NACH-ANZAL for any sales related transaction. The table NAST is however applicable irrespective of application.
You can pass on your data to this field (NASST-ANZAL) for your reqmt.
regards,

Number of copies by default in a printer?

Hi everybody.
I've a simple problem, but I don't know how to solve it.
If I go to TC SP01 with a specific user and I see the details of a spool request (double click on it), if I go to output attributes, at No. Of Copies I see a 2, and all documents printed with this printer has it... I want to fix it to 1 by default for all documents, but I can't find where...
Thanks in advance,
Oscar

Hi Oscar,
I don't know of any way to default the number of copies at a printer level. It is posible for the user to set it as a default, but it's quite complex so they must REALLY have been tinkering to set this.
Here goes,
As the logged on user print something (anything)
In the print pop-up choose Properties
In the next pop-up choose Specification
In the field name drop-down choose 'Number of copies'
Under this the default value will be shown.
If this is set to 2 you can change it back to 1.
Feels like a long-shot, but worth checking.
Regards,
Nick

Number of copies to print

HP Officejet 6500 (Wireless)- but using USB connection-Windows 7 (Home Prem). If I ask it to print 2 copies from Foxit PDF editor it only prints one copy. If I then go back to the print instruction it still shows "2" against number of copies. I change that to "1" and tell it to print but this time it prints two copies. Can anyone help please? Thanks.

Hi,
This 4 represent - send immidiately. i.e. when you click the message tab, after entering the output type u hav to click further data tab in this there is dispach time option here you have to select send immidiately.
For taking no. of copies whiling giving the print out system will ask for the option you can enter 4 no. here.
regards,
Anisha

Number of copies keeps changing

New Windows 7 pc, and just upgrade to CS5, learning inDesign after using Illustrator for years. When I go to print in inDesign, i set the number of copies to say 5, then i have to go to setup to access the print drivers for additional features like paper choices, and that it's a publication and so fourth, and then I hit print for the print drivers window and it comes back to the InDesign print window, and the number of copies has changed back to 1......so after going through all those preferences i have to continually reset the number of copies and that doesn't seem right.....never had this type of issue before with the same printer. Any insight would be greatly appreciated.

Every time you reset your drivers/update your print preferences, it makes sense that all the application-specific print settings would reset. Every time it updates the preference file, it re-saves over it and the base preference file wouldn't carry any data on how many copies to print in each app.
I'm not a Windows person, so bear with me. Do you HAVE to setup the print drivers Every time you want to print something? On Mac, you set them up once and you don't have to reopen them to get extra options from the CS applications because the application itself opens the driver. I assumed it would be the same on PC, since it would be a pain to have to reinstall the printer every time you wanted to print something.

Adobe Reader X cannot respond to printer properties number of copies issue

Hi to all!
I have an issue using Adobe Reader X 10.0.1, 10.1.0, 10.1.2, when select File > Print > Page Handling: Copies = 1, click Printer Properties > Page Setup, specify eg. Copies : 5, it print 1 copy only instead of 5 on Windows platform.
Happen to a number of printers, eg. HP, Epson, Xerox, Canon, Brother printer, etc.
For some reason, Adobe Reader X cannot respond to the No. of copies specified in the printer properties.
Anyone have any solutions or workarounds to solve this issue besides specifying Adobe Reader X : File>Print>Page Handling: 5 copies?
Is there any website, forum, supporting documents, with regards to above scenario?
Please kindly advice, thank you in advance!

Hi LoriAUC,
Sorry for the late response!
The users had a habit of going into the printer properties to specify other printer options eg. 2-sided printing, manual feed printing, heavy paper, etc... besides the number of copies inside the printer properties as well. Therefore, they prefer to do all the various changes in the printer properties instead of changing it at the Adobe Reader dialog.
The same method were applied by all the users in Adobe Reader 9.4.7 and there were perfectly no issue at all! All the network printers (23 different brands and models in the network) responded to the printer properties "number of copies" accordingly.
It seems that Adobe Reader X dialog Page Handling: No of copies, cannot synchronise and recognise the "No of copies" specified in the printer properties. This symptom was tested and found to be the same behaviour for different printer manufacturers. Wonder if there is a bug with Adobe Reader X as this issue did not occur for Adobe Reader 8 and 9 versions. The users were using Reader 8 and 9 versions before and there were no complaints until it was eventually all upgraded to Reader X, starting from 10.0.1, 10.1.0 and now 10.1.2.
What do you think could be the cause?

How to set default number of copies of labels to be printed in SAP EWM

hi folks,
we have configured in such a way that, whenever we maintain the inbound delivery in /scwm/prdi, GR will happen automatically and a GR label will be printed automatically. We have defined condition records to determine the printer and also mentioned the number of copies as 1. Now, we need to have 2 copies of the GR label to be printed automatically. I've changed the no of copies as 2 in the condition records but still only 1 copy is getting printed. i have also maintained spool parameter where in i have specified no of copies as 2. Are there any other places i need to change the no of copies to be printed? if so, could you please sugget me?
thanks in advance,
best regards,
Praveen

Hi Praveen,
#No of Copies# in transaction /SCWM/PRWO6 is not actual number of copies . This is more an index how the number of copies is determined . Please use F4 on this field and you will see that index 2 means "Number of Copies" = 1.
In Transaction /SCWM/ 60000431 you need to actual number of copies for your document. But this number is only taken if you set the index in /SCWM/PRWO6 to "0".
I hope this information helps you.
Sabya

Unable to print number of copies on label printer

Hi Everyone,
I am able to print smartform any number of copies on standard printer.
But when I change from standard printer name to Label printer name and execute the smartform with number of copies ( greater than 1 ).
For label printer I am able to print only one copy, irrespective of number of copies specified. However I can able to number of copies specified for standard printer.
Can anyone help me what could be the reason? Is that any settings should be done for label printer ?
Thanks.
From
Reddy

Paddy,
Welcome to Apple Discussions.
The problem might be a corrupt preference. Does this problem occur with all applications? If not, which application?
Try Repair Disk Permissions using Disk Utility.

I need to print with a number of copies set

Hi im trying to print with number of copies set but it dosent work.. I tried it on 3 different printers.
It only print 1 copie when i say 2 or 3 or 4...
(aset.add(new Copies(2)); )
Is there something missing in that code...
thanks
Here is my code.
import java.io.*;
import javax.print.*;
import javax.print.attribute.HashPrintRequestAttributeSet;
import javax.print.attribute.PrintRequestAttributeSet;
import javax.print.attribute.standard.Copies;
    public class Print {
        public static void main(String[] args) {
            try {
                // Open the image file
                InputStream inputStream = new BufferedInputStream(new FileInputStream("c:\\coupon.txt"));
                // Find the default service
                DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
                PrintService service = PrintServiceLookup.lookupDefaultPrintService();
                PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
                aset.add(new Copies(2)); // Dosent work only 1 copie is printed
                // Create the print job
                DocPrintJob job = service.createPrintJob();
                Doc doc = new SimpleDoc(inputStream, flavor, null);
                PrintJobWatcher pjDone = new PrintJobWatcher(job);
                // Print it
                job.print(doc, aset);
                // Wait for the print job to be done
                pjDone.waitForDone();
                // It is now safe to close the input stream
                inputStream.close();
            } catch (PrintException e) {
                System.out.println(e);
            } catch (IOException e) {
                System.out.println(e);
    }

Same problem here. I have found hundreds of questions in several places, but no answer.
Problem is that when I set the copies, PrintServiceLookup.lookupPrintServices returns no results.
Please help.

Number of copies printed upon P.O. change

Similar Messages

Maybe you are looking for