Number of Entries icon should come on report selection screen

Hi,
In my requirement, I want Number of Entries icon on my report selection screen.
Means when i insert the required selection parameter's, then i want to see the total number of entries, which is come after the execution of my report.
Please let me know that how can i do it...
Regards..

HI.
Check the link display number of line items in my report at the title bar
I have extract the part from the above link.
if u want to display the no of line items, as shown in SE16, u create a SET STATUS with a push button with name No of Entries on the report screen.For that status, u write the code as to display no of lines in ur table by using either
DESCRIBE TABLE itab LINES lin.
lin gives the no of line items.
or
select count(*) from vbap.
write sy-dbcnt.
U got require output, when ur pressing No of entries button, then this will display on the output screen.
Thanks and Regards
Sachin Sharma

Similar Messages

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Problen in report selection screen

Hi ,
I had a problem in the report.In the report selection screen user asking to keep page no option.So when they select the page no in the selection screen,so from that page number report out put should display.
how to do this.
Thanks,

If you generating the LIST using the classical approch you cah use the SCROLL LIST keyword for this purpose.
Like:
DATA: L_PAGENO TYPE I.
L_PAGENO = 3.
START-OF-SELECTION.
DO 100 TIMES.
WRITE: / SY-ABCDE.
ENDDO.
SCROLL LIST INDEX 0 TO: PAGE L_PAGENO.
TOP-OF-PAGE.
WRITE: 'Top-of-page'.
Regards,
Naimesh Patel

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Object text not coming in report selection screen

Hi,
i have an object task type for which text has been loaded.this is included in one reports selection screen.But in F4 only kee is displayed and not text.If check button is pressed text is displayed besides key.Also text doesnt come after report is executed.
please help.
Thanks,
Prasanna N.

Hi Prasanna,
In the Query Designer goto the properties of the required object that you want to display key and text for it, Select the Key and Text Display option. Then you can see in report key and text for that object.
Hope this helps.
Veerendra.

Table Control on a report selection screen -not a dialog transaction screen

Hi
Does anyone know of a way to have table control functionality on a report selection-screen? The program needs to be able to run as a background job (ie cannot be a dialog transaction) and we need to be able to save variants with the selection-screen values.
Any help would be appreciated.
The key point is we want to allow the user to enter a dynamic number of rows of table data on the selection-screen, save a variant containing that data and execute the program with the variant as a background job.
Thanks
Nicole Knight

Hi Nicole,
The main problem is how to persist the data. If you are not able to create a couple of tables then you could always utilise TVARV instead. On a similar line to my original post you could have the button call a dialog transaction. In here you could do your normal GUI table control. When saving the data simply transpose each column into a separate select-option held on TVARV keyed by the 'variant name' + fieldname. Then retrieve and transpose this back when executing the report.
Other methods could be storing the data in cluster xy (see EXPORT TO DATABASE command).
This seems a bit overkill for what would be a couple of maintenance dialogs.
Cheers,
Pete
PS. The view cluster is just a way of hierarchically performing table maintenance across multiple related tables. It offers a good UI for this purpose (header and item config tables) and is utilised extensively in the IMG.

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

ECCS : custom characteristics into standard report selection screen

Hello guys,
I have added a custom characteristic which is also a subasignment to the EC-CS module.
This field now appears into the standard report selection screen as expected.
I want to define this field as a mandatory selection field, do you know if this is possible? (exemple of standard report CX34A)
Thank you in advance for your help
best regards
Pascal.

Hi Thereza,
This field is already flaged
I have found the following solution : create a variant and assign it to the standard transcation with transaction SE93..
Best regards

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

ALV Report - Selection screen information should appear in Output screen

Hi experts,
I am working on ALV Reports.
I want selection screen information to appear in ouputscreen when report executed.
Those who know the sloution pls tell me as soon as possible.
regards,
Imran

Hi Imrangs ,
Ur requirement is not clear -
if u want ur selection screen and the output screen on the same screen, i.e if u fill ur selection options with input and press the button then ur ALV will display on the same screen. For this try to use Screen painter, it will get resolved.
http://www.kodyaz.com/articles/sap-abap-tutorial-alv-grid-cl_gui_alv_grid-screen-painter.aspx
chreers
Regards
Neha

To Load ALV Layout in report selection screen

Hi...
I want the selection screen option for user so that he can select any of the saved layouts.
I have done some coding after refering to some threads in here.But I can't proceed further...plz help
selection screen
SELECTION-SCREEN BEGIN OF BLOCK 006 WITH FRAME TITLE text-006.
PARAMETERS: p_layout LIKE disvariant-variant. " layout
SELECTION-SCREEN END OF BLOCK 006.
data declarations
DATA: wa_variant TYPE disvariant.
DATA: w_variant_save TYPE c VALUE 'A'.
DATA: gs_variant TYPE disvariant.
DATA: gs_layout TYPE lvc_s_layo.
DATA: g_repid LIKE sy-repid.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_layout.
PERFORM variant_input_help.
FORM variant_input_help .
DATA: tl_dynpfields TYPE TABLE OF dynpread.
DATA: wl_exit TYPE c.
DATA: wal_variant LIKE wa_variant.
DATA: wal_dynpfields TYPE dynpread.
Get values from the selection screen to determine layout set
wal_dynpfields-fieldname = p_layout.
APPEND wal_dynpfields TO tl_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
 DYNAME = sy-cprog
 DYNUMB = '1000'
TRANSLATE_TO_UPPER = ' '
REQUEST = ' '
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
TABLES
 DYNPFIELDS = tl_dynpfields
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT tl_dynpfields INTO wal_dynpfields.
 CASE wal_dynpfields-fieldname.
 WHEN 'p_layout'.
 wa_variant-variant = wal_dynpfields-fieldvalue.
 ENDCASE.
ENDLOOP.
wa_variant-report = sy-repid.
wa_variant-variant = p_layout.
wa_variant-username = sy-uname.
**Invoke function to provide drop down entries
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 IS_VARIANT = wa_variant
 I_TABNAME_HEADER =
 I_TABNAME_ITEM =
 IT_DEFAULT_FIELDCAT =
 I_SAVE = w_variant_save
 I_DISPLAY_VIA_GRID = ' '
 IMPORTING
 E_EXIT = wl_exit
 ES_VARIANT = wal_variant
 EXCEPTIONS
 NOT_FOUND = 1
 PROGRAM_ERROR = 2
 OTHERS = 3
IF SY-SUBRC IS INITIAL.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
 IF wl_exit IS INITIAL.
 p_layout = wal_variant-variant.
 ENDIF.
ELSE.
 message I033 WITH TEXT-034.
ENDIF.
*gs_variant-variant = p_layout.
*gs_variant-report = sy-repid.
FREE: tl_dynpfields.
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = g_repid
 I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = ' '
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME =
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT = ??
 IT_FIELDCAT = ??
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = ' '
 IS_VARIANT = wal_variant
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = ??
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " variant_input_help
wat steps shud i take

Hi ,
I have used the below FM for layout help,
data: gs_variant like disvariant,
gs_variant-report = sy-repid.
 call function 'REUSE_ALV_VARIANT_F4'
 exporting
 is_variant = gs_variant
 i_save = 'A'
 i_display_via_grid = 'X'
 importing
 es_variant = gs_variant
 exceptions
 not_found = 1
 program_error = 2
 others = 3
 if sy-subrc = 0.
 pa_var = gs_variant-variant.
 endif.
Note pa_var is your select options field in the SELECTION SCREEN,
call function 'REUSE_ALV_GRID_DISPLAY' "
 exporting
 i_bypassing_buffer = 'X'
 i_buffer_active = 'X'
 i_callback_program = sy-repid
 i_callback_top_of_page = 'TOP_OF_PAGE'
 is_layout = gs_layout
 it_fieldcat = gt_fieldcat
 i_save = 'A'
 is_variant = gs_variant
 it_events = gt_events
 tables
 t_outtab = gt_output
 exceptions
 program_error = 1
 others = 2
hope this helps you.
Regards,
Raghavendra

Copa Report selection screen in display mode

Dear Friends:
In COPA Report, we have sales group,Fiscal year and Currency type in our selection screen,sales group should be in display mode i.e. the user
must not be able to change the sales group.
How to reslove the problem.Please advise.
Thanks&Regards
MSReddy

Hello
Create some authourization checks for the user. Try to check with BASIS team.
Also check if you can default entries for a particular user.
reg

Button on report selection screen application toolbar

Hi,
I want to place Button (application tool bar)on report(executable program) selection screen.
Need your valuable suggestions.
Thanks,
Sreedevi

hii
1. create GUI status with "Status" name and "Short text"
2. Now a screen will appear with the following,
 a. Menu Bar
 b. Application tool bar
 c. Function keys
3. Click the down arrow near the application toolbar
4. Enter the function code like SAVE, EXIT, etc., You
can also give ur own meaningful naming convention .
 For example ( ZTEST)
5. Now press enter, it will ask for "Static text" or "Dynamic Text". Choose Static text and press enter
6. Now it will ask for function text and Icon name. Specify some function text ( what it does ) and Icon name u want to attach.
7. Press enter. It will ask for function keys. Specify a function key and press enter.
8. Now u can handle this function code (ZTEST) either in PBO/PAI like IF FUNCTION = ZTEST ...ENDIF
Note:
Don't forget to set the GUI status u have created in PBO event.
Example code to set PF status.
PROCESS BEFORE OUTPUT.
MODULE liste_initialisieren.
MODULE setstatus_0100.
LOOP AT extract WITH CONTROL
tctrl_ztufi_league CURSOR nextline.
MODULE liste_show_liste.
ENDLOOP.
In the above MODULE setstatus_0100 do the following,
SET PF-STATUS 'ZGUI'. ( The GUI status u have created).
Check this:
http://www.sapdevelopment.co.uk/reporting/selscr/but_appbut.htm
http://www.sap-basis-abap.com/abap/add-button-to-alv-toolbar-with-reuse-alv-list-display.htm
Re: How to add push buttons in out put screen of ALV
http://www.planetsap.com/Tips_and_Tricks.htm
Regards
Naresh

Reports(Selection screen events)

Hi guys,
What are the 11 selection screen events?

Hai Raj Singh
Here is the Report Event
Check it
This is the order of execution in Classical/Interactive Report Events
Classical Reports
Reports which are properly formatted (header, footer, page numbers etc.,) with the help of one or more external events like top-of-page,end-of-page etc., are called as CLASSICAL REPORTS.
Standard list.
Output of Report program is nothing but Standard list. It consists of one continuous page of 60,000 lines.
To restrict number of lines per page.
Report Zxxxxx line-count 25.
 OR
Report Zxxxxx line-count 25(3).
( In this case 3 lines are reserved for footer)
To restrict Output width.
Report Zxxxx line-size 125.
To suppress standard page heading.
Report Zxxxx no standard page heading
Above all at a time:
Report Zxxxx line-count 25(3)
 line-size 125
 no standard page heading.
Screen Events List Events
Initialization. Start-of-selection
At selection-screen. Top-of-page.
At selection-screen on <field>. End-of-page.
 End-of-selection.
We can initialize the selection-screen with calculated default values under this event.
 Initialization.
 s_date-high = sy-datum.
 s_date-low = sy-datum - 15.
 Append s_date.
We can validate all the inputs on selection screen fields under this event.
 At selection-screen.
 If s_carrid-low is initial or
 s_connid-low is initial or
 s_date is initial.
 < ... code for validation... >.
 Endif.
We can validate a particular field input on selection screen under this event.
 At selection-screen on s_carrid.
 If s_carrid-low < > LH.
 < code for validation>
 Endif.
If any of the other event comes before
SelectEndselect. statements, then to break
that event, we require this S-O-S event.
Start-of-selection.
Select * from
Endselect.
If we need some portion of the output (like
column headings) to appear in all the pages,
then we use this event.
Top-of-page.
Write:/ Carrier,10 Connection 20 Date.
If there is no external output statement before
Top-of-page event, then this event will not
work.
Once the cursor reaches the last line of the
page, automatically this event will be triggered.
Report Zxxx line-count 25(3).
In this case line numbers 23, 24 and 25 are
reserved for footer.
Once the cursor reaches 23rd line, this event
will be triggered.
End-of-page.
Write:/ sy-uline(75).
Write:/ This is end of page:,sy-pagno.
Write:/ sy-uline(75).
This event is used for concluding part of List.
 End-of-selection.
 Write:/ This is end of the Report.
Interactive Report
A simple report or even a classical report displays a clustered list with all the requested output at one go.
What ever it is displayed, it is final. That means, the user can not interact with with that list.
A simple report or even a classical report displays a clustered list with all the requested output at one go.
What ever it is displayed, it is final. That means, the user can not interact with with that list.
In the interactive reports, we can create as many as 21 lists.
The first list is called Basic list and all the successive lists are called Secondary lists. Each list is again an interactive.
The Basic list is not deleted when secondary list is created.
A secondary list may either overlay the basic list or appear in an additional dialog window on the same screen.
The system variable associated with list number is SY-LSIND.
For basic list SY-LSIND = 0 and for secondary lists, SY-LSIND varies from 1 to 20.
User can interact with the list by the following ways.
Double clicking or single click and pressing F2 (function key) or single click with hotspot on.
 OR
Selecting from menu bar or from application tool bar.
All the events used in classical reports can be used in Basic List.
The event End-of-page can be used in Secondary Lists also.(the other six events can not be used in secondary lists)
You can not place select-options in secondary lists.
The following additional events are
applicable to secondary lists.
Top-of-page during line-selection.
At line-selection.
At user-command.
When you double click on any field in the basic list, you will be navigating to secondary list with detailed information pertaining to clicked field.
As such we need to store the clicked field information at some variable.
Hide temporarily stores the content of clicked field for later use.
The default title of the out put is the text what we enter during creation of program.
This title can be changed using:
SET TITLEBAR AAA.
 GUI status includes:
Menu bar
Application tool bar and
Activating standard tool bar
 GUI status can be created using
SET PF-STATUS BBB.
You can have 8 menus ( out of which, 2 menus are reserved for System and Help).
Each menu can have 15 menu items.
Each menu item can have 3 levels of submenus.
You can create 35 items in application tool bar.
Thanks & Regards
Sreenivasulup

Number of Entries icon should come on report selection screen

Similar Messages

Maybe you are looking for