Number of errors during itunes instillation??

When installing the newest version of itunes i get this message 'Warning 1909 cannot create shortcut itunes.lnk verify that the destination folder exist and that you can access it'' I have uninstalled and reinstalled itunes several times and deleted everything off of my computer, read several forums about the topic and cannot seem to find a solution. Please help! very frustrating, I also have a nano 7th generation (touch screen) that will not show up or sync when i plug it into itunes.

I fixed the problem by uninstalling all of the itunes and apple components including bonjour. Then, i was able to delete the the program data file \itunes. then, i simply downloaded the new software and voila it worked. I also synced my iphone and it worked just fine! Finally, but what a royal pain in the as_!!!!

Similar Messages

Error during iTunes 10 installation - iPod Service failed to start

Hi Everyone,
I am getting this error during installation of iTunes 10(Windows XP).
+*"Service (iPod Service)failed to start.Verify that you have sufficient priveleges to start system services."*+
*Can any of you please help?* I ignored it first and continued with the installation. Then tried to update iphone to iOS 4.1 which crashed. I had to go to Apple store to get my iphone restored. I am having trouble installing itunes and cannot restore data from backup.
I tried uninstalling itunes and deleted all itunes data as suggested by the guy at the Apple store. Still not working. Will appreciate if someone can help resolve this error. Thanks.

I just got off the phone with Apple tech support. The problem with that iPod Service is a problem with XP Service Pack 3, but can be fixed this way:
1. Right click on "My Computer", select "Properties"
2. Click on the Advanced tab.
3. in the Startup and Recovery section, click the Settings button.
4. Click the Edit byutton to edit your boot.ini file in notepad.
5. Look for "/noexecute=" in the file and change the word after the equals to "optin" (sorry - I don't remember what the original setting was anymore).
6. Save the file, close notepad, click the OK button on Startup and Recovery window, then reboot.
The warning message about the iPod Service should stop. Also, this helps with iPhones that are not recognized by Windows or iTunes after an install fails.

Number of errors during install

i keep getting this error message during install of itunes
the installer has insufficent privileges to access this directory: C:ProgramData\Microsoft\Windows\StartMenu\Programs\QuickTime. The installation cannot continue. Log on as Adiminstrator or contact your system administrator.
i did the right click run as adiminstrator no good
also i get this error message as well
Warning 1909. Could not create Shortcut Apple Software Update.Ink. Verify that the destination folder exists and that you can access it

I fixed the problem by uninstalling all of the itunes and apple components including bonjour. Then, i was able to delete the the program data file \itunes. then, i simply downloaded the new software and voila it worked. I also synced my iphone and it worked just fine! Finally, but what a royal pain in the as_!!!!

Error during itunes download

I have a PC with Windows and I am trying to download iTunes so that I can manage the files on my iPod Nano. However, the download is interupted 3 times by a variety of errors:
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32".version="8.0.50727/6195." .publicKey Token="11fc8b3b911e18e3b" .processo rArchitecture="x86". Please refer to Help and Support for more information. HRESULT: 0x80070002."***This error occurs during the Publishing product information, I click OK and it appears to continue downloading.
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privleges to start system services" ***This error occurs during the Status: Starting Services. I attempt to click Retry several times before clicking Ignore. It appears to continue downloading.
I recieve error #2 a second time and then the download stops.
What am I doing wrong? How can I get iTunes downloaded on my computer?
Thanks so much in advance.

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

"Invalid Drive I:\" error during iTunes installation. What do I do now?

Can't install iTunes on my pc. Keep getting "invalid Drive I:\" error.
I have no drive I:\. I have C:, D: and P:(external drive).
I have downloaded iTunes a couple of times but none work.
I am using an HP DV6700 with windows 7.
Help, please.

Let's try the following user tip with that one:
"Invalid drive X:\" install errors

Character to number conversion error during uploading csv

hi
I have a question regarding oracle application express.
I want to upload the csv data to the database using apex application.
I used a code from otn but it does not work to the number datatype value..
It gives an error like number to charcter conversion error am not able to resolve it.
I also use TO_NUMBER functions to convert but it doesn't works..please help me out..
Following code I used to upload the data:
DECLARE
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number:= 1;
v_line VARCHAR2 (32767):= NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows number;
BEGIN
delete from chktable;
select blob_content into v_blob_data
from wwv_flow_files
where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USER) and id = (select max(id) from wwv_flow_files where updated_by = :APP_USER); v_blob_len := dbms_lob.getlength(v_blob_data); v_position := 1; WHILE ( v_position <= v_blob_len ) LOOP v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len; IF v_char = CHR(10) THEN v_line := REPLACE (v_line,',','~'); v_data_array := wwv_flow_utilities.string_to_table (v_line,'~'); EXECUTE IMMEDIATE 'insert into SRS_CC_MI_DATA(OUTAGE,TAR_#,CUSTOMER_NAME,RECEIVED,RESOLUTION_TIME,SEVERITY,PRIORITY)
values (:1,:2,:3,:4,:5,:6,:7)'
USING
v_data_array(1),
v_data_array(2),
v_data_array(3),
v_data_array(4),
v_data_array(5),
v_data_array(6),
v_data_array(7);
v_line := NULL;
END IF;
END LOOP;
END;
my table contains:
"OUTAGE" VARCHAR2(4000),
"TAR_#" VARCHAR2(4000),
"CUSTOMER_NAME" VARCHAR2(4000),
"RECEIVED" VARCHAR2(4000),
"RESOLUTION_TIME" VARCHAR2(4000),
"SEVERITY" VARCHAR2(1),
"PRIORITY" VARCHAR2(4000) NOT NULL ENABLE
i need to make last two rows number type..
it works fine if it is varchar2 but not with number type..
plz help out

Hello,
>> "PRIORITY" VARCHAR2(4000) NOT NULL ENABLE
What is the valid values of this column that you need to use varchar2(4000)? Are you sure this column include valid numbers?
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Resolving errors during Oracle 8i Corba Deployment for Business Components Project

Below is an excerpt from the messages that were put out while creating a deployment profile for Corba for a Business Components Project. I am using JDeveloper 3.0.
resolving: oracle/jbo/server/DatabaseTransactionFactory
Error while resolving class oracle/jbo/server/DatabaseTransactionFactory
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/common/remote/PiggybackReturn
resolving: oracle/jbo/server/xml/JTPersistable
resolving: oracle/jbo/server/util/JboSQLUtil
Error while resolving class oracle/jbo/server/util/JboSQLUtil
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/xml/XMLContextCustImpl
oracle/jbo/server/xml/JTStorageOutput is already resolved
resolving: oracle/jbo/server/java/util/Iterator
resolving: oracle/jbo/server/rules/JboSQLCompareValidator
Error while resolving class oracle/jbo/server/rules/JboSQLCompareValidator
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/ValidationManager
Error while resolving class oracle/jbo/server/ValidationManager
Exception java.sql.SQLException: End of TNS data channel
initialization complete
resolving: oracle/jbo/server/TransactionListener
Error while resolving class oracle/jbo/server/TransactionListener
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/common/CheckedListResourceBundle
resolving: oracle/jbo/DeleteEvent
Error while resolving class oracle/jbo/DeleteEvent
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/common/PiggybackObjRemovedEntry
resolving: oracle/jbo/server/rules/SQLBindUtility
resolving: oracle/jbo/server/ViewRowCache
Error while resolving class oracle/jbo/server/ViewRowCache
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/ContainerObjectEvent
resolving: oracle/jbo/domain/Char$1$facClass
Error while resolving class oracle/jbo/domain/Char$1$facClass
ORA-29554: unhandled Java out of memory condition
resolving: oracle/jbo/server/xml/JTStorageInput
resolving: oracle/jbo/server/java/util/ArraySet
resolving: oracle/jbo/common/JboInitialContext$HomeNameParser
oracle/jbo/server/java/util/ListIterator is already resolved
resolving: oracle/jbo/server/xml/VersionProcessException
resolving: oracle/jbo/ScrollEvent
Are these known errors, are they likely to cause problems? Was the deployment "successful"? The process did continue after summarizing the number of errors during the resolution process and eventually terminated.

Hi Peter,
The process of resolving the transitive closure of a large set of java classes (like the BC4J framework) can be quite memory intensive in JServer for the resolution phase.
You can alleviate this problem by turning the verifier (-noverify option) off.
That will speed up the resolution process a bit.
Also in your init.ora file check the java pool size and if it is less than 50 MB, do increase it to 50 MB or larger (The higher the better.)
Hope this helps,
-Kishore
null

An Error occurred during the instillation of assembly.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="x86"". please refer to Help and Support for more information. HRESULT: 0x800736FD

while trying to install the new versoin of itunes i get this error message
An Error occurred during the instillation of assembly.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b 9a1e18e3b",processorArchitecture="x86"". please refer to Help and Support for more information. HRESULT: 0x800736FD
i unistalled the older version i had and that did not help
i downloaded something about a microsoft framework.4 what ever that means
im not particularly gifted when it comes to computers so your help would be very gratefully received!!!
thank you
Dermot

Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

Unknown Error during Recovery - iPad no longer Recognized by iTunes

I have a 3rd Generation iPad which I was attempting to perform a factory reset. I received an "Unknown Error" during the process and from that point on I have been unable to get iTunes to recognize my iPad in recovery mode (or otherwise).
I have tried every thread on the subject, but I found one interesting thing. If I connect the iPad with the same cable, etc. to another computer it immediately recognizes it in recovery mode and offers to restore the iPad.
It seems like my computer is not recognizing the iPad because it was in the process of restoring the device when the error occurred. Does anyone know if there is a way to reset or fix this issue. I would prefer not to update iTunes and download both the new iTunes and iPad software again and use another computer if it is not necessary.
Any help would be appreciated.
Thanks

Hey KSHItunes,
That was a good test to try your iPad on another computer. It does seem to isolate the issue to something with your computer setup.
Although you would prefer not to update iTunes, there may be steps in this article which can help.
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Please check it out.
Regards,
Nubz

Itunes error during install service apple mobile device failed to start.. help

I had to install Chrome browser in order to use my gmail account. Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer. During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok. Help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Itunes: Fatal Error During Installation (it wont download at all) HELP!

Yesterday my iTunes (7.3.1) was working with no problems then the iTunes + Quicktime upgrade came up telling me to download the newer version but I didnt want to download it yet untill after i restarted my computer so I exited out of both the upgrade screen and iTunes then restarted the computer and when I tried to open up iTunes (after restarting), a little window came up saying:
+*Preparing to install...*+
Then after a minute or two it said: *+Please wait while Windows configures iTunes+*
Then another window pops up saying:
*+Error writing to file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\fi.lproj\iTunesMiniPlayerLocalized.dll. +*
*+Verify that you have access to that directory.+*
and I have no idea what that means so i closed it then a pop up shows saying: *+Fatal Error During Installation.+*
so i deleted iTunes, Quicktime, iPod and everything i could (that my computer would let me) that had to do with Apple and restarted my computer then tried to download iTunes again but now when its reisntalling it says
*+Error writing to file:+* +*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
+*Verify that you have access to that directory.*+
Then after this i went to the folder
+*C:\Program Files\Common Files\Apple\Mobile Device Support\bin\disnoted.exe.*+
and made sure that Read Only wasn't checked but everytime i go to uncheck it and click Apply and OK it doesnt stay it just goes right back to being checked...because when u click OK the window goes away so i immediately opened it back up to see if changed but it was filled again
WHAT DO I DO?!?!? please can someone help me
The details for my computer are:
Microsoft Windows XP
Professional Version 2002
Service Pack 2

if it helps at all...
I downloaded Quicktime seperately from iTunes and i got that with no problem and it worked just fine but i cant get iTunes at all
and i have follwed the instructions on the website about uninstalling everything but nothing seems to be working
...is there any possible way that anybody can help me out with this.
any help that anyone can offer is very greatly appreciated,
Please & Thank You.

During iTunes installation "Registering iTunes automation server"... I am getting following error messag from "Microsoft visual C runtime Library"... Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe

During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Itunes 10 errors during installation with ipodservice error message

I have been trying to get itunes 10 installed for weeks. The upgrade would not work normally, so I removed itunes/quicktime/safari and decided try installing fresh.
I still get a error during the installation process saying that ipodservice.exe cannot execute instruction at 0x7c91b21a referenced at 0x0000000010. memory could not be 'written'
does anyone know how to fix this?

i'm getting a similar message. running Windows XP with Symantec AV

Number of errors during itunes instillation??

Similar Messages

Maybe you are looking for