Number of hits for pages

Hi,
It would be good to know how many times a page has been hit (hit counter).
More specifically I'm interested in knowing how many people viewed a specific how-to-guide etc.
Regards,

You can check this for blogs, you have written, but I am not aware of any special counter on every page. Otto

Similar Messages

One select Statement - Number of hits displaying in ST05

Hi,
I am using single select statement on MARA table along with that using SELECT FOR ALL Entries,
However, I am getting number of hits for each records in ST05 like 2,3,8,2,2 etc.
I need to reduce number of hits by using single query only... please suggest..
Thanks,
Sai

Hi Siegfried,
just out of curiosity:
> You can get identicals on FAE for at least 3 reasons:
> + duplicates in the driver table, remove as written above
> + duplicate execution of the SELECT
> + fieldlist smaller than the primary key, which is not the case here
What exactly do you mean with the last point?
fieldlist in the select statement like this?
data it like table of t100.
select sprsl arbgb msgnr
from t100 into table it up to 500 rows.
select "sprsl" from t100 into table it
    FOR ALL ENTRIES IN it
    where sprsl = it-sprsl
    and arbgb = it-arbgb
    and msgnr = it-msgnr.
or field list in the where clause like this?
data it like table of t100.
select sprsl arbgb msgnr
from t100 into table it up to 50000 rows.
DELETE ADJACENT DUPLICATES FROM it COMPARING sprsl arbgb.
select sprsl from t100 into table it
    FOR ALL ENTRIES IN it
    where "sprsl" = it-sprsl
    and "arbgb" = it-arbgb.
Or something else?
I'm asking because i've never heard or seen this before as a problem reg. identicals
for FAE. Only duplicates in driver tables or multiple executions of the FAE with the same
driver table contents (or parts of it).
If we have a smaller select field list we may read too many records which are thrown away in thd database interface
because of the distinct property of the FAE (distinct sprsl in the 2nd case) but we don't see identical selects in ST05.
How does a FAE that produces identical selects with unique driver table that is executed once look like?
So I'm a little bit confused what you meant here... .
Kind regards,
Hermann

Watch the number of hits on a char while reporting

Hi all,
I want to create an aggregate for a characteristic in a report. But i don't know on which char i have to build the aggregate. How can i know that, as far as i know based on number of hits for a char we can decide this. Where can we watch the number of hits?

Hi Kishore,
If you don't know on which characteristic you have to create the aggregate its good to created aggregates based on system proposals, for that statistical data should be available in the system upto date.
while creating the aggregate you can consider the system proposal, then the system will check the statistical data ans based on that aggregates will be created.
After the above task observe the new aggregates some days, so that you can judge which aggreage is used frequently based on the column "valuation", it it contains more number of "+" symbols that is good aggregate and eventually you can retain the effective aggregates and you can delete the unwanted.
you can run the report in RSRT debug mode to know which underlying objectes (aggregates / info cubes of a multiprovider etc) being hit.
Hope it helps !!!
Regards
Prasad.

Number of hits on single page

Hi Friends,
I would like to get the number of hits on single iview. Is it possible by any means?
Basically I have a static iview ( PAR file). I just want to count the number of hits on this page. Any help is highly appreciated.
Thanks in advance!
Saravanan

Hi Saravanan,
You could use the portal activity report, see http://help.sap.com/saphelp_nw04s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/frameset.htm
Anyhow, if you have developed the iView by yourself, and you are only interested in the hits on that iView, you could implement a counter by yourself, but that should consider cluster environments and how to aggregate the data of these. All this is implemented in the portal activity report, so if that fits somehow, that should be the easiest way for you to go.
Hope it helps
Detlev

How to submit a bug report for OSB? - restore fails if number of items per page is changed from the default of 30

In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?

Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich

Number field validation for all application pages

Hi
I am using apex version 4.0.
I need to create number field validation for all application pages. if user press any character then display alert message. How it possible?
Thanks

>
Hi Shiv,
I am using apex version 4.0.
I need to create number field validation for all application pages. if
user press any character then display alert message. How it possible?This is an Apex question - point your browser here
Oracle Application Express (APEX)
HTH,
Paul...

Query for log Parser to get number of hits in a day or week for particular web applications or site collection

Hi All,
Want to get the number of hits in a day for a web application with IIS logs. so need to know Query for log Parser to get number hits in a day or week for particular web applications or site collection. Kindly help
Regards,
Naveen

I'm trying to get this from WSS 3.0, Hence using the Log Parser

I have no download link or serial number on my order page for Photoshop Element 12

I have no download link or serial number on my order page for Photoshop Elements 12 like I have for previous version.
I asked for upgrading on october 23th, base on the grace period, because I bought PE11 in september, since this I chatted to times with Adobe support about this with only a very little step each time for the problem resolution. But we are now novenber 24th, one month later and I have no serial number and download link on "my adobe" order page.
Chatting is very difficult for non english speaking person. I have no direct email for order resolution where I can take time to answer and ask question.

Try direct contact with country reps by phone or fax:
Adobe Systems France SAS
112, avenue Kléber
75784 Paris Cedex 16
France
Tel: +33 1 56 54 99 00
Fax: +33 1 56 54 99 01

I started with 100 pages in my photo book. Then reduced the number to 75 for finished project. When i click on "buy" it says I have some frames with no photos. But I've checked entire book

I started a book with 100 pages, but reduced it to 75 by deleting some pages. When i completed the book & tried to buy it a box pops up saying I have some frames that need photos. I've checked the book over & over & cannot find any pages like that. How can I order my completed book?

Look for pages that use photos for the background, even if you have other photos on the page. It'll look something like this in the layout pane:
It would look like this in the PDF version:
If you have a 1 photo per page, full page, you could have that option selected and not know it unless you looked at the layout pane like this example:
OT

In pre-CC versions could just type a number to select a page to print and now you can't

I just recently upgraded to CC and I produce thousands of files and have to output PDF files of each page and name them differently (ie. filename-front.pdf for page 1 and filename-back.pdf for page 2). I used to be able to do this very fast by just typing the number of the page and then click return and it prints or outputs a PDF. Now I have to hit tab 3 times to get the cursor to go into the page number field and then type the number to get it to work. Is there not a way to do the same thing I've been doing for the past 15 years I've been using InDesign?

Unless there is a script for forcing the focus to the page range box, hitting tab 3 times seems to be what's needed.
Perhaps you should consider filing a feature request for a change back.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Mike

Number of hits to an HTMLDB application

Hi,
I would like to know if there is an option in HTMLDB where I can find out how many people have logged into my application in a single day. This will give an idea of the number of hits we have for our application in a single day. Also, if Iam able to get information like - what is the LOB (Line Of Business) of the person whoâs logged into the application, it would be great !
Thanks,
Manzoor.

Manzoor,
Login to your workspace, and then from the "Workspace Administration" region on the right side of the page, select "Manage Workspace", then select "Monitor Activity".
This page has a variety of reports on it that show usage of your HTML DB applications.
Thanks,
- Scott -

How To Restrict Number Of Rows For Multiple Group In Report Output

Hi ,
I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
Below is the XML tag i am using -
First i have declare the variable to restrict the rows -
<xsl:variable name="lpp" select="number(7)"/>
<xsl:variable name="lpp1" select="number(5)"/>
<xsl:variable name="lpp2" select="number(3)"/>
For Each -
<?for-each:PAYSLIP?>
<xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
<xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
<xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
<?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
<?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
<?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
Deduction Group -
<?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Earning Group -
<?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Tax Group -
<?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Please let me know in case additional detail is require.
Thanks in Advance.
Thanks,
Harsh
Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

variable lpp2 is declare to restrict EarTaxLines -
<xsl:variable name="lpp2" select="number(2)"/>
This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

Search help how to restrict number of hits.

Hi,
I have created a search help in SE11, the search help reads a table view and the search help is connected to
exit HRMC_PREM_EXIT_A in HR. Everything works fine except for that I want to restrict the number of hits to 500, I don't want to get a result of 5000 hits because that search takes too long time.
Br Benita

Hello Benita
Set the dialog type of your search help = 'A' (dialog depends on set of values).
Regards
Uwe

How to find the number of hits on a single query

how to get the information for number of hits on a single query on single day in BI system,
Regards
Kumar..

Following links might help you
Re: BEx Query is executed how many times???
Number of times a Query is Run

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

Number of hits for pages

Similar Messages

Maybe you are looking for