Number of iterations is not defined in file

My environment HP Performance Center
PC Standalone Edition 11.52.341Internal Components BuildOTA Client 11.52.341.0
User Interface 11.52.341.0
WebGate Client 11.52.341.0
Test Run Scheduler 11.52.341.0
Site Administration Client Not Available
Sprinter 11.50.341
Analysis Extension 11.50.341
Quality Center 11.50.341
ALM Lab Extension for functional and performance testing11.50.983 Issue I got two errors at the beginning of test:Error (-81015): LR_VUG: Number of iterations is not defined in file 'C:\Program Files (x86)\HP\Performance Center Host\Temp\lr5tmpdireFn.620\lrcfgYAR.621\cfgAKT.626'Error: The user files were not transferred to the local load generator In the PC11.52 Release Notes says that it is known Defect ID: QCCR1J25640 and it was fixed. Why I still get these errors?

Hello Henry,
If it is a One Client Scenario the BBPGETVD transaction will not work. You will require to use MDS_LOAD_COCKPIT for vendor replication for the same.
Regards,
Sapna

Similar Messages

GLIBC_2.0 not defined in file libc.so.6

I am attempting to install the patch 11I.ATG.PF.H Detla 7, got errors at the end with 7 reports not compiling successfully. I went to recompile one report and got the following error message
Error Message:
/finora/product/10222/8.0.6/bin/rwcon60: relocation error: /finora/product/10222/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Some articles state that LD_ASSUME_KERNEL needs to be set which is untrue for Redhat Linux 5.5. In fact things break if this is set in RHEL5.5.
Not sure why this is not working.....any one else have issues with this?

I am attempting to install the patch 11I.ATG.PF.H Detla 7, got errors at the end with 7 reports not compiling successfully. I went to recompile one report and got the following error message
Error Message:
/finora/product/10222/8.0.6/bin/rwcon60: relocation error: /finora/product/10222/8.0.6/network/jre11/lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time referencePlease see these docs.
ar60runb Relocation Error 'Version Glibc_2.0 Not Defined In File libc.so.6' When Running Concurrent Requests [ID 284535.1]
Concurrent Requests Getting Error: ar60run: Relocation Error [ID 389698.1]
Running Concurren Request Causes ar60run: relocation error libjava.so: symbol__libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference [ID 404500.1]
Concurrent Requests Produce Zero Byte Output Files [ID 415196.1]
Standard Concurrent Requests Fail After Fresh Install or Clone on Linux [ID 264951.1]
rwcon60 Fails With 'Symbol __libc_wait, Version Glibc_2.0 Not Defined' Error Generating Reports [ID 371344.1]
Concurrent Manager Jobs Fail After Reinstallation of the Operating System [ID 464960.1]
> Some articles state that LD_ASSUME_KERNEL needs to be set which is untrue for Redhat Linux 5.5. In fact things break if this is set in RHEL5.5.
Not sure why this is not working.....any one else have issues with this?Do not set LD_ASSUME_KERNEL on OEL5/RHEL5 -- What should the value of LD_ASSUME_KERNEL be set to for Linux? [ID 377217.1]
Thanks,
Hussein

Version GLIBC_2.0 not defined in file libc.so.6

hey all
am trying to install database 9i on readhat 5
installation is done but DBCA NETCA are giving error
/u01/oracle9/jre/1.1.8/bin/../lib/i686/green_threads/libzip.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
soo how can i solve that please???
i tryed the LD_ASSUME_KERNEL and didnt work also the patch compat-libcwait is installed and is installed and the patch 3006854 is also installed
what can i do????

i tryed the LD_ASSUME_KERNEL Is still your LD_ASSUME_KERNEL set?
Recommended Settings for Installing Oracle Products
O/S
RHEL5, OEL5, SLES10
LD_ASSUME_KERNEL setting
Should not be set
Additionally you can review: Oracle Metalink Document: What should the value of LD_ASSUME_KERNEL be set to for Linux?: Doc ID: Note:377217.1
Adith

Just got an iMac with Pages 5.2, which (unlike earlier iterations) does not recognize .cwk files. What can I use to open them?

I've got some legacy documents that are unavailable anywhere else. Since I cannot replace or recreated them, they must be recovered. Any suggestions on what application will get the job done? Thanks.

Try LibreOffice [free].
Peter

Facebook games keep giving draggable not defined error

hi i keep getting draggable not defined when trying to click tab ( link ) pages on facebook games. both firexox and java are latest versions, this is a fresh install of vista 64 and i have tried it on my windows 7 also 64 bit. sorry im not java minded at all.
Error: Draggable is not defined
Source File: http://cdn1.kingdomsofcamelot.com/fb/e2/src/js/camelotmain.js?112233449900886
Line: 1
after evaluation i get
Error: missing ; before statement
Source File: javascript:%20Error:%20Draggable%20is%20not%20defined%20Source%20File:%20http://cdn1.kingdomsofcamelot.com/fb/e2/src/js/camelotmain.js?112233449900886%20Line:%201
Line: 1, Column: 8
Source Code:
Error: Draggable is not defined Source File: http://cdn1.kingdomsofcamelot.com/fb/e2/src/js/camelotmain.js?112233449900886 Line: 1

Hi Chief Mendenhall,
It's really a Microsoft error, not a Acrobat error, but I know that doesn't make the inability to sign any less frustrating. This probably has something to do with the communication bridge between Acrobat, Windows, and the CAC software. I know you're not responsible for software upgrades, but is there any chance you can download the free Adobe Reader (Adobe Reader Install for all versions). Even though Reader doesn't have the same editing capability as Acrobat Pro, it will allow you to sign a PDF file, and what I'm looking to see is if this is somehow related to the age of version 8.1, which is well past its end-of life. Even version 9 in longer supported.
Thanks,
Steve

Error: $x_ShowChildren is not defined

The page definition page is not displaying any of the usual page objects. I'm getting an Error: $x_ShowChildren is not defined in the error console.
Source File: http://apex.oracle.com/pls/otn/f?p=4000:4150:1692562586117686::NO:::
Line: 39 error on the page definition page.

Hi all, we are experiencing this "$x_ShowChildren is not defined" error on our new
APEX 3.0 installation.
I've already checked the notes at
http://www.oracle.com/technology/products/database/application_express/html/3.0_fsps.html#01
and our page really looks as depicted at point one but the refresh doesn't seem to
do anything. We have tried to flush the cache and even change browser (IE and FF)
but the problem is still there.
I've checked the page source and the missing function is defined in
/i/javascript/htmldb_html_elements.js
The js file is visible if loaded directly but somehow the page fails with
Error: $x_ShowChildren is not defined
Source File: [...]/f?p=4000:4150:4106999370516652::::FB_FLOW_PAGE_ID,FB_FLOW_ID:1,101
Line: 39
(I've removed our address there ...)
The strange thing is that this happens only from certain PCs but all the
configurations (browser, network, ...) seem to be identical.
Any idea of what might be going on?
Thanks in advance for your kind help

Just Upgraded to 3.1.2 - doSubmit is not defined.

I just upgraded to the latest XE by running the download.
I am getting this error on the browser when I try to login :
Error: doSubmit is not defined
Source File: http://127.0.0.1:8080/apex/f?p=4550:1:1915389911065507
Line: 1
Any suggestions?
-SJ

Hello,
Did you follow all the post installation steps? (Updating the Javascript/CSS files etc?). If so, try clearing out your browser cache to make sure your browser is getting the latest files.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

GLIBCXX_3.4 not defined [solved]

I'm trying to compile a C++ program (for school), but I'm getting an error.
Error:
./mymain: relocation error: ./mymain: symbol _ZNKSt9basic_iosIcSt11char_traitsIcEEcvPvEv, version GLIBCXX_3.4 not defined in file libstdc++.so.6 with link time reference
It was working a couple days ago.
I tried recompiling libstdc++5, but it didn't help.
I don't know much about this library, so some help would be nice.
~jnengland77
Last edited by jnengland77 (2008-10-28 23:20:31)

Well I'm just compiling use g++ -o mymain mymain.cpp or make (e.g. make mymain ).
As far as changes I hadn't updated in a while so I updated I think last Friday. I think there was like 400 MB in downloads. I can't remember what was updated. It must have been from that night though. Since it worked that night, but I haven't compiled anything till now (been rebooted a couple times since then).
I haven't rebooted my desktop for a while, and recently updated it, too. But it's more frequently updated. Till I get the laptop to compile stuff I'll be leaving the desktop running.
~jnengland77
UPDATE: I think I fixed the problem by reinstalling gcc and gcc-lib. And maybe using more parameters for g++ such as -g -Wall and-Os . There after it fixes make, too. I don't quite understand why that fixed it, unless it was the reinstall of gcc and gcc-libs that did it.
Last edited by jnengland77 (2008-10-28 07:03:35)

"GLIBC_2.3.3 not defined" problem when10g express installation in Red Hat9

I downloaded "oracle-xe-univ-10.2.0.1-1.0.i386.rpm" from Oracle website, and then
updated the Red Hat 9 with " libaio-0.3.96-3.src.rpm" patch. Now, the RH9 linux looks as below:
==========================
$ rpm -q glibc
glibc-2.3.2-11.9
$ rpm -q libaio
libaio-0.3.96-3
==========================
After that, I installed Oracle 10.2.0 express on the RH9 linux with below commands:
===========================================
$ rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
$ /etc/init.d/oracle-xe configure
============================================
When I tried to start SQLPLUS, but I encounter the error described as the title:
==========================================================
relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
==========================================================
I just checked the forum, and found many people have asked the same problem. Have we got one solution to the problem?
At the same time, I found Red Hat 9 does NOT occur in the document "Oracle Express Installation Guide 10g Release 2 (10.2) for Linux" (http://www.oracle.com/technology/software/products/database/xe/files/install.102/b25144/toc.htm)
My question is whether Oracle Express 10.2 can NOT be installed on RH9 or not? Does any expert give us one clear answer? If not, we shall not try it on RH9, and we can install it on Fedora Core4 or SESE SLES-9
Message was edited by:
user545243

My question is whether Oracle Express 10.2 can NOT be
installed on RH9 or not? Does any expert give us one
clear answer? If not, we shall not try it on RH9, and
we can install it on Fedora Core4 or SESE SLES-9Oracle CAN be installed on RH9.
However, if you try to mount a modern engine in an ancient Model-T ford car, you must be prepared to make some adjustments.
Same here ... RH9 was released several years before Oracle Database 10.2 and many, many things have been changed in Linux. Oracle assumes that the Linux you are using has a specific set of libraries (glibc being the most important) available at a specific version - they were not available with the same API in RH9 days so you would need to make those libraries available yourself without interfering with other operations of RH9.
The same holds true for other combinations of Linux distro and Oracle database distro. However, some very sharp people have installed using some of those combinations and have published those installation cookbooks - Werner Puschitz at http://www.puschitz.com and Ivan Kartik at http://ivan.kartik.sk/ are the most notable.
I'd highly recommend you consider getting a newer version, and possibly staying very close to a version that Oracle used, to keep the opportunities for troubleshooting to a minimum.

I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files.

I have produced a number of DVD on my iMac. They are stored in a folder called Burn Folder. I want to get them into iTunes so I can play them on Apple TV. I have tried to convert them to MP4s using Handbrake but Handbrake does not recognize these files. I am stumped.

If you have the original movie files, you'd be much better converting those, otherwise try MPEGstreamclip.

Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

Dear Experts,
I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22) and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
This prob is only specific while creating only SP and SH Customers.
Many ThanX.

Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
Regards.

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Error in ME59N- Internal number assignment not defined

Dear Gurus,
I am getting error while creation automatic PO In ME59N. Below error shows
Error Name                                                                                          Massage Class          Msg No.
PO header data still faulty                                                                            MEPO                         2
Internal number assignment not defined (please enter number)                 06                              243
I have done all the setting in Material Master & Vendor Master for Automatic PO Genration.
Aslo I maintain the source list & Info Record for two vendors.
I assign the source of supply in PR .
After this when I exicute in ME59N by entering Purchasing Group,Purchasing Org,Vendor,Plant
and selected the Per Requisition , per contract tab.
After this above two error is showing in SAP.
Kindly give us solution to resolve this.
Regards.
Abhijit
Subject changed to reflect the issue- by: Jürgen L

Hi
The error is probably caused because T161-NUMKI = <BLANK>. Please fill in the valid T161-NUMKI.
This needs to be done in customising
Transaction SPRO:
Material Management -> Purchasing -> Purchase Order -> Define Document types
Number range in the case of internal number assignment
Hope this information is of help.
Kind regards,
Lorraine

Variable ByteArray is not defined in generated introspection file

I am getting this error, Variable ByteArray is not defined.   This worked fine against Flex SDK 4.0 and is now throwing a runtime error once it is built against the 4.5 SDK. Is this related to updates to the introspection in Flash Builder?
Keith H.
ReferenceError: Error #1065: Variable ByteArray is not defined.
at global/flash.utils::getDefinitionByName()
at com.adobe.serializers.utility::TypeUtility$/assignProperty()[C:\depot \flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serializers\sr c\com\adobe\serializers\utility\TypeUtility.as:593]
at com.adobe.serializers.utility::TypeUtility$/convertToStrongType()[C:\ depot\flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serialize rs\src\com\adobe\serializers\utility\TypeUtility.as:562]
at com.adobe.serializers.utility::TypeUtility$/convertListToStrongType() [C:\depot\flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\seria lizers\src\com\adobe\serializers\utility\TypeUtility.as:518]
at com.adobe.serializers.utility::TypeUtility$/assignProperty()[C:\depot \flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serializers\sr c\com\adobe\serializers\utility\TypeUtility.as:623]
at com.adobe.serializers.utility::TypeUtility$/convertToStrongType()[C:\ depot\flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serialize rs\src\com\adobe\serializers\utility\TypeUtility.as:562]
at com.adobe.serializers.utility::TypeUtility$/convertListToStrongType() [C:\depot\flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\seria lizers\src\com\adobe\serializers\utility\TypeUtility.as:518]
at com.adobe.serializers.utility::TypeUtility$/assignProperty()[C:\depot \flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serializers\sr c\com\adobe\serializers\utility\TypeUtility.as:623]
at com.adobe.serializers.utility::TypeUtility$/convertToStrongType()[C:\ depot\flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serialize rs\src\com\adobe\serializers\utility\TypeUtility.as:562]
at com.adobe.serializers.utility::TypeUtility$/convertResultHandler()[C: \depot\flex\ide_trunk\ide_builder\com.adobe.flexbuilder.dcrad\serializ ers\src\com\adobe\serializers\utility\TypeUtility.as:436]
at mx.rpc.soap::Operation/http://www.adobe.com/2006/flex/mx/internal::processResult()[E:\dev\hero_private\frameworks\projects\rpc\src\mx\rpc\soap\Operati on.as:953]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\hero_private\frameworks\projects\rpc\src\mx\rpc\AbstractInvo ker.as:313]
at mx.rpc::Responder/result()[E:\dev\hero_private\frameworks\projects\rp c\src\mx\rpc\Responder.as:56]
at mx.rpc::AsyncRequest/acknowledge()[E:\dev\hero_private\frameworks\pro jects\rpc\src\mx\rpc\AsyncRequest.as:84]
at DirectHTTPMessageResponder/completeHandler()[E:\dev\hero_private\fram eworks\projects\rpc\src\mx\messaging\channels\DirectHTTPChannel.as:451 ]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()

I am facing similar error. Please let me know the links where you find solution for this problem.
I have many files generated upon introspection of a web service which contains similar line as follows:
model_internal::propertyTypeMap["uid"] = "ByteArray";
ReferenceError: Error #1065: Variable ByteArray is not defined.
    at global/flash.utils::getDefinitionByName()
    at com.adobe.serializers.utility::TypeUtility$/assignProperty()[C:\depot\flex\ide_trunk\ide_ builder\com.adobe.flexbuilder.dcrad\serializers\src\com\adobe\serializers\utility\TypeUtil ity.as:593]
    at com.adobe.serializers.utility::TypeUtility$/convertToStrongType()[C:\depot\flex\ide_trunk \ide_builder\com.adobe.flexbuilder.dcrad\serializers\src\com\adobe\serializers\utility\Typ eUtility.as:562]
    at com.adobe.serializers.utility::TypeUtility$/convertResultHandler()[C:\depot\flex\ide_trun k\ide_builder\com.adobe.flexbuilder.dcrad\serializers\src\com\adobe\serializers\utility\Ty peUtility.as:436]
    at mx.rpc.soap::Operation/http://www.adobe.com/2006/flex/mx/internal::processResult()[E:\dev\hero_private\frameworks \projects\rpc\src\mx\rpc\soap\Operation.as:953]
    at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\hero_private\frameworks \projects\rpc\src\mx\rpc\AbstractInvoker.as:313]
    at mx.rpc::Responder/result()[E:\dev\hero_private\frameworks\projects\rpc\src\mx\rpc\Respond er.as:56]
    at mx.rpc::AsyncRequest/acknowledge()[E:\dev\hero_private\frameworks\projects\rpc\src\mx\rpc \AsyncRequest.as:84]
    at DirectHTTPMessageResponder/completeHandler()[E:\dev\hero_private\frameworks\projects\rpc\ src\mx\messaging\channels\DirectHTTPChannel.as:451]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
Thanks,
Deepa

Object with runtime number '0' not defined

Hello,
We have a problem in one step of the workflow we created for sales orders.
The following are the errors:
EXECUTE_METHOD_OBJECT_SYNC -> Object with runtime number '0' not defined
EXECUTE_METHOD_BOR -> Object with runtime number '0' not defined
EXECUTE_METHOD_BOR -> Object with runtime number '0' not defined
Object with runtime number '0' not defined
Message no. OL808
We have already seen all the binds and correct.
Thanks!
Ariel Prebianca

Associated message no with message 'Object with runtime number '0' not defined' is OL 808.
Check Note 1322173 - Wrong error msg raised in BP_JOB_READ of interrupt process. It may not directly solve the issue but it will help you show correct message.

Number of iterations is not defined in file

Similar Messages

Maybe you are looking for